Lightning to micro USB adapter with Otterbox Armor
Does anyone know if the Apple Lightning to Micro USB adapter will fit in the hole on the bottom of the Otterbox Armor series case?
not not just use the normal cable and then use a usb to microUSB converter?
Similar Messages
-
I'd like to get a longer USB-Lightning cable than the one that came with my iPhone 5, which I think is the one that Apple sells. They also sell a "Lightning to Micro USB Adapter," but I'm not sure exactly what Micro USB is.
I have quite a few cables that have a standard USB at one end and a smaller USB connecter at the other end. These cables have generally come with external disk drives.
Would someone know if that is the same as the Apple Lightning to Micro USB Adapter?
Thank you.USB cables come in normal USB plugs( into hub PC etc )
at the other end you get a mini plug
OR the latest which is micro plug
You probably have the mini plug cable whereas the Apple product
is a lightning plug and at other end a Micro socket
This is to allow Apple to meet the world wide adoption of the micro cable
as the charging medium for ALL mobile phones along with USB power source
To reduce the multiplicity of chargers shipped worldwide every day
"ultimately "
Look on amazon for the cables and the pictures will immediately make sense
of the difference
so yes an Apple adapter and USB micro cable would give you a longer cable -
hi! I'm italian and I have a questions: the "dock to micro usb adapter" for iphone ( http://store.apple.com/it/product/MD099ZM/A/adattatore-micro-usb-apple-per-iphon e#compatibility ) is compatible with the ipad 3° generation?
thanks to all!!!no
-
Lightning to mini usb adapter?
I would like to purchase a lightning to mini usb adapter from the Uk apple site, and have it shipped to me in the US, can i do this?
I don't see why not.
Is this the one?
http://store.apple.com/uk/product/MD820ZM/A/lightning-to-micro-usb-adapter -
My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify
You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I'd like to use this remote for my iphone 5 in my car to listen to music. The iphone will be plugged into the stereo and be stowed away but I want a way to change the song because my stereo doesnt allow complete ipod control. Can i use the 30 pin adapter with this remote to hook the wireless adapter for the remote to the iphone? So i guess what im asking is does the lightning to 30 pin adapter support whatever kind of data is going between the iphone and wireless remote adapter?If not are there any good alternatives out there? Thanks!
I am pretty sure that will not work. Does your TV have HDMI? You will need this:
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=4 5&fs=m.iphoneCompatibility%3Diphone_5
The adapter your purchased has this note :
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported. -
Compatibility of lightning to 30-pins adapter with Camera Connection
Hello,
I had an iPad 2 with the 30-pin connection and used previous camera connection kit, which I used to download photos to my iPad. This kit has both an USB adapter and a SD card reader.
Recently I upgraded to an iPad Air2 with lightning connector, and I was wondering if I buy the lightning to 30-pin adapter to use the camera connection kit I already own, or I should buy the new lightning to USB camera or SD reader adapters?
Anyone is using correctly that combination (lightning to 30-pin adapter + 30-pin camera connection kit)?
thanks for your help.
Rafael MartinezThe Lightning to 30 pin adapter and Camera Connection Kit combo works for me.
-
Has anyone found a lightning to 30 pin adapter where the lightning end is the same size as the cable that comes with the phone? I know there have been some non-apple versions, but I can't tell if they are the same as the Apple versions where the lightnin end is slightly bigger than the cabe that ships with the phone. Most iPhone bumpers only accomodate the original charing cabe ad the adapter cable is just slighter bigger and doesnt fit. Also, i'm not referring to the square, cable-less adapter.
Depending on your caes I shaped mine carefully with a craft knife seems all the case manufacturers designed the cases for lightning cables but seemed blind to the adapter and it's likely use
Have you not seen the Apple adapter with .2m cable between the plugs
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=3a
will do what you want ,I use one in exactly same scenario -
Hello.....I just recently bought a linksys WRT150N router and am having problems connecting a computer that uses a Linksys WUSB54G Wireless-G USB Adapter. This computer's operating system is windows 2000 and it cannot find the network I setup.....Even when I double checked that the router was in mixed mode.....Can anybody help?
I am having a similar problem with my WUSB54GC adapter connecting to my WRT54G router 100 feet away with only a single stud wall in between. Sometimes the computer connects automatically and sometimes I have to restart windows or use the repair connection wizard to get the computer to connect. Using Windows XP and Mixed infrastructure network with SSID broadcasting disabled.
Message Edited by HOOfan_1 on 05-29-200709:03 PM -
Compatibil​ity of Agilent GPIB/USB adapter with NI
Hi,
I have an Agilent GPIB / USB adapter 82357B, and I'm experiencing some problems for detecting my instruments in the laboratory when I try to use the labview software for capturing the data from the measurement instruments.
I installed the CD with the libraries the adapter has and through this software I can detect the instruments, however once that I open the Labview software from National instruments(NI) for capturing my data, I miss comunication with the devices in both programs, the Agilent one and in the MAX of NI.
I run across a document regarding tip on using Agilent GPIB solutions in National instruments's Labview environment. I have done all the document indicates, but It is not workingt, I experience the problem I outlined above for detecting the instruments.
I hope someone can help me with that.
RegardsDCU STUDENT wrote:
Yes I am. According to documents it is possible. But I don't know want else to do, since I have done what document indicated. I as mentioned in previous message, now I can see the measurement instrument with Labview and using the Agilent cable adapter, and I can stablish communication with device since that when I select the device in the labview program, a led in the instrument is ON, indicating communication. However when I try to capture the data on screen, there is not data at all.
Hello DCU STUDENT,
It sounds like there may be some conflict between the NI VISA and Agilent drivers, which can occur between certain models; considering when you use the NI cable data can be collected when when you're using the Agilent you cannot. Please tell me what versions of both drivers you are using so I can determine whether or not there are any known incompatibilities between the two if you're still receiving the same error after following these instructions.
Can you also please go through this instrument troubleshooting guide to see if your installation matches the expected configuration of a functional device so we can confirm that your driver has been installed correctly from the previous guides.
For a IEEE488 Agilent Device Card, as you mentioned that you have the NIVISATulip.dll enabled, for this GPIB configuration to work you must ensure that the 488 Programs must be activated with NI 488.2 (At the Enable Agilent GPIB cards option) through the Agilent Connection Expert.
You've mentioned that you've been able to establish a connection with the device and see communication transfer, yet you are getting no returned communication. Do you see a similar response when you view the device through the Measurement and Automation Explorer?
If it is possible, could you test your configuration with any other Agilent devices with your current configuration and see if the error persists?
Alex Thomas, University of Manchester School of EEE LabVIEW Ambassador (CLAD) -
Unable to connect TP-link 3G HSPA USB adapter with Macbook Air
I have just bought the TP-link USB adapter but unable to connect with my Macbook Air (latest version!). Pl advice
http://www.tp-link.us/support/contact/?categoryid=530
Ask the manufacturer. -
Can I use a Belkin F6D4050 wireless USB adapter with my Airport Extreme?
I received a freebie Belkin wireless adapter a little while back. Am now trying to use it to connect a device to my existing Airport Extreme wireless home network. Am having some problems and wonder if it is my device (I think it should work with the device, though), or possibly with the Airport.
I may already have my answer (...no?), but am a bit illiterate with wireless. My Airport is using WPA2, and is 802.11n. My adapter says it works with WPA2, but only lists 802.11g and 802.11b.
Any thoughts are appreciated.I cannot say for sure if the g/b vs n is the cause, but if all other devices like the AE and that one device does not, you go with the odds. Others will have to chime-in on that.
And I recommend NetGear (not necessarily *above* LinkSys) because my 3-year-old NetGear router has been serving my MBP fine for 3 months ... no glitches. -
Re: Acer Aspire Switch 10 - Proprietary Charging Port to micro-USB adapter
I have a high power power bank capable of charging via both usb and 19v. Included were adapter cables that fit many devices that don't charge via usb. However none fit an acer switch 12.Any ideas?
Radio Shack, if you can still find one, has adapter tips that fit. Make sure your 19V supply is putting out the appropriate wattage, though I expect if it's designed to power a laptop it'll have plenty.
-
Will be some extra edition for European union with micro USB?
Because european law doesn't allow to sell new mobile phones with other then microUSB chargers.
thank youhttp://www.engadget.com/2012/09/13/apple-lightning-to-micro-usb-adapter/
-
Is the lightening adaptor the same as a micro USB?
Is the lightening adaptor the same as a micro USB?
There is a micro usb to lightning socket which allows a micro USB
cable to connect to a lightning device
as in this
http://store.apple.com/uk/product/MD820ZM/A/lightning-to-micro-usb-adapter?fnode =45
Maybe you are looking for
-
Ebs 11i Cloning in Win 2003 dbtier fails with ERROR: Could not open
Hi, The rapidclone - DBTier cloning (11i) on Windows 2003 server fails with the following weird error message. There is no detailed log file created. echo %PATH% f:\oracle\prodora\8.0.6\bin;f:\oracle\proddb\9.2.0\apache\perl\perl\5.0053\bin\mswin32-x
-
Workflow in starting or stopping status
Hi All iam in ebs r12 12.1.3 db 11gr2 11.2.0.3 when stop or start workflow notification. i have status STARTING OR STOPPING. I did shutdown application , bounced database ran cmclean.sql restart the database and application and still have the same er
-
Java.lang.NullPointerException while invoking Weblogic10 Webservice JAX-RPC
hello, I'm facing this Eception while invoking the Webservice 10/03/2009 01:39:19 Ú gosi.business.batch.financialaccounting.gosiSambaRets.controller.SambaClient callUploadPayment SEVERE: null java.lang.NullPointerException at com.bea.staxb.buildtime.
-
5.3 CUP Approver not found error
Hi Experts Having an issue on CUP. I have created a CAD for my first stage and second stage. 1st Stage (Business Process Owner) HR and linked to approver 2nd Stage (Role type) = Single and linked to approver. The request is created but when I approve
-
Synchronization issue with Outlook 2007
Dear Gurus, I'm literally fighting with my BB synchronization. I have a Curve 8900 (SW v. 5.0.0.441 and Platform 5.2.0.31), DM v. 6.0.0.40 and Outlook 2007. When I try to set up the synchronization of the Address Book and the Calendar, by selecting O