Lightning to usb camera adapter saying attachment uses too much power

Can anybody help me please as I brought this cable and I get a message saying accessory unavailable or attachment uses too much power . Thanks in advance

If it's an Apple adapter, take it to an Apple store for replacement.
Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Similar Messages

  • HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    I'm having same problems.   If I connect my blackberry it says it uses too much power.  If I take sd card out of phone and connect that way I get the same message.    The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras..........  I'm still trawling the site to find any such list!    Just need to know if it will work with a blackberry .....  If not I've got to take it back.    Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics.    I don't own a traditional camera because my phone has a great one.  Really don't want to have to carry a camera about with me!   They don't make it easy do they!   

  • Camera Connection Kit - Accessory uses too much power

    I am trying to import photos from my Kodak EasyShare M873 via the USB connector from the CCK. About a quarter of the way through the import, the iPad disconnects and states, "The attached accessory is using too much power". Is anyone else getting this. I suppose I could just remove the SD card from the camera everytime I want to import. But then what is the point of having the USB adaptor if the iPad can't handle connecting to a semi-low quality consumer camera?

    The USB cable is great if the battery is full and you don't have a ton of photos, or if the camera either has photos in its "built-in" memory or doesn't use SD.
    PERSONALLY I'm glad they included both, but plan to use only the SD adapter on trips.
    Doug
    PS: It might be interesting, though probably camera-specific, to compare transfers times both ways...

  • IPad camera kit error "device uses too much power"

    Got the camera kit....when I attach it I get an error that says the device uses too much power. I've shut down and restarted the iPad several times and still get the same error. Anyone know what I can do?

    I have a camera that uses compact flash cards therefore I have been experimenting with card readers to avoid draining the camera battery when downloading the images to the iPad.
    I have been using the USB part of the camera connection kit with a multi card reader, at first I could not get anything to work, I thought ' the not enough power reason, I sorted out a powered USB hub to try, again no good, I disconnected everything and thought one last try, I put the card in the reader, connected the USB cable to the USB part of the camera connection kit and finally inserted the whole lot into the iPad, to my surprise the light on the card reader came on and a few seconds later 70 nef files were previewed on the screen.
    I repeated the above several times with the same results, I then tried two other card readers again OK, but if I just removed the card and then re inserted it nothing happened, these card readers are no name supermarket specials.
    I may have been lucky but I will continue to try my method and see if it holds up to regular use, so make the physical connection to the iPad the last part of the connection process, I hope this is of some help to others.

  • USB Devices Disabled due to "using too much power", but no devices plugged in

    I keep getting the following notification
    USB Devices Disabled
    Unplug the device using too much
    power to re-enable USB devices.
    The thing this the only thing plugged into my Macbook Pro is the charger.
    Any ideas on how to fix this?

    Unusual.
    I would start with SMC and PRAM reset:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/PH14222?viewlocale=en_US
    Ciao.

  • Error message, device uses too much power

    I am attempting to transfer digital photos from a point and shoot type digital camera to my Ipad 2.  I am connected through an USB and the Apple connector kit.  I get an error message that says, "device uses too much power" and it will not transfer images.

    Does the camera use an SD card? Have you tried going that route?

  • HT4101 I can't use my lightning to USB camera adapter to connect my new Sony Cybershot DSC-W730 to my new ipad Air. It says the connected device needs too much power. Any ideas what to do?

    Has anyone a solution to my newly purchased lightning to USB camera adapter not connecting my Sony Cybershot DSC-W730 to my new ipad Air? It says the connected device requires too much power.

    Use the camera's SD card.
     Cheers, Tom

  • HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

    When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

    It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
    Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

  • I got lightning to usb camera adapter but get fault message on ipad mine "cannot use device" the connected usb device requires too much power

    I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.

    Or use the camera's SD card instead.
     Cheers, Tom

  • Can you connect a usb SuperDrive if you use a lightning to usb camera adapter and a usb hub?

    I was just wondering if ypu could connect a usb SuperDrive if you use the lightning to usb camera adapter, a usb hub, and then plug the SuperDrive into the hub. Will it work to play disks, or movies, or something?

    No, drive consume too much power.
    Try using a wireless flash drive.

  • Original Apple Lightning to USB Camera Adapter gives warning

    I have a 4th generation iPad with iOS 7.1 and the original Apple Lightning to USB Camera Adapter bought online from the US Apple Store. Whenever I plug it in the iPad I get this warning: 'This cable or accessory is not certified and may not work reliably with this iPad.' If I close the iPad cover and leave it for a few minutes, when I unlock it and go to the Settings<General<About page the cck is listed. I tried the lightning usb adapter on an iPad with iOS 6 and it was immediately recognized. Is this a software problem or a faulty camera adapter?

    The original Camera Connection Kit uses a 30-pin connector thile the iPad 4 has a lightning connector. You mention an adapter. Are you using an original Apple-branded adapter? I have seen other posts here that say it is likely this adapter that is causing the problem.
    Using the Lightning connectors do no cause this problem.
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a and
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a

  • What is the exact technical difference between "Lightning to USB Camera Adapter" and "Lightning to USB Cable"

    Mainly I am interested in attaching the iPhone to a receiver (or car etc.) to play music.
    Both the "Lightning to USB Cable" and the "Lightning to USB Camera Adapter" seem to do the trick. So what is the exact technical difference between the two items?
    When connected to a receiver, is the iPhone the USB Master in both cases? Is the USB "Audio Device Class" standard used to transmit audio?

    Thanks for all the answers! I think I should specify the use case much more clearly. Sorry for not having done this earlier.
    Use Case 1:
    When I connect the iPhone to the receiver I can use the Lightning to USB, because the receiver has a female type A, just like e.g. a PC or like the charger. So I would agree that the Receiver must be the USB host, and the iPhone the USB device. This works just fine in my case, with iPhone and iPad.
    In this case, the audio goes from the device to the host, or "Audio-in".
    Use Case 2:
    A friend of mine has a small device that converts USB to Toslink. This thing has a female Mini USB Type A, which is typically used at the receiving side of a USB connection. This device can be connected e.g. to a Mac, and then the Mac can output audio via this device to receiver which accepts optical Toslink signals.
    In this case, the audio goes from the host to the device, or "Audio-out".
    It is this use case 2 that I am unsure about:
    a) Can the Lightning to USB cable be used in this case (assuming that I find the necessary non-standard adapters to actually connect the USB ports)? This would mean that the iPhone can act as a USB host with the Lightning to USB cable.
    b) I know that the Lightning to USB Camera Adapter does convert the iPad into an USB host, otherwise it could not read data from a camera. So could this adapter also be used to produce "Audio out" to a USB device that supports receiving music?
    If yes, would this also work with an iPhone (as pointed out in another answer, the iPhone does nor support reading pictures from a camera)?

  • Lightning to USB camera adapter.

    I recently purchased an IPAD MINI and a Lightning to USB Camera adapter.  I went to plug my Sony Cyber Shot digital camera into my Ipad Mini via the adapter and it says "USB DEVICE REQUIRES TOO MUCH POWER.  Yet, when I plugged in my big Nikon D5000 SLR camera, it works fine.  My problem is, we like to carry around the smaller Sony camera more often, and it wont work with the new adapter.  Any suggestions?

    Please try to disable USB charging (if available) on your Sony Cyber Shot or set USB connection type as  [PTP] (Picture Transfer Protocol) or Mass Storage Device.
    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content. If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Good luck!
    (For more info: http://support.apple.com/kb/HT4101)

  • HT4101 When I connect using the USB version I get a message on the ipad saying "the attached accessory uses too much power. What can I do?

    Ipad2 Camera Connection Kit
    When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
    What should I do please?
    David

    I believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
     Cheers, Tom

  • I can no longer download photos to my ipad with the camera attachment. the message says thats its using too much power. i have a 100% charge and i used it before and it worked fine.

    I can no longer upload photos with the camera attachment. I am getting an error saying the device uses too much power. I have used the device before. Is there anything that can be done to fix this problem?

    You don't actually say what the problem is, but maybe this can help:
    USB and Firewire information:
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    http://support.apple.com/kb/HT4049?viewlocale=en_US

Maybe you are looking for