Lightning to VGA adapter doesn't work with Ipad Air

I have a Lightning to VGA adapter that I want to use with my Ipad Air and pc screen. When I connect it with my Ipad and the screen, on my ipad the blue bar appears but I don't get anything on my pc screen. I dit the same with my iphone 6 and that works perfect. Any idea what the problem could be?
Both devices has IOS 8.3.
Thanks in advance.

I have a similar problem to blueskoi. I have a lightning to HDMI Connector which no longer works on my iPad Air, however it still works fine on my wife's iPad 4.
The only difference I can find is that her iPad hasn't been updated to IOS 8.3, whereas my iPad Air has.
Is anybody else experiencing the same problem, or am I missing something?
I have done a full settings reset on my Air but that didn't resolve it. I get the blue bar at the top of the screen and my TV Screen flashes, but then no signal appears,
Any help would be most gratefully received.
Regards
Paul

Similar Messages

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

Does Magic Mouse work with ipad air?

Does Magic Mouse work with IPad Air?

Yes, it is a Bluetooth device. However, my iPad will not connect to the mouse. Not sure why.
I use my iPad as my personal computer. Mainly for surfing the web, social media, paying bills online... I already have a Bluetooth keyboard that connects to the iPad, so thought it would be nice to have a mouse.

How to make iTunes 64 bit work with iPad Air in win 8.1 64 bit?

I have purchased - or updated - my iPad to Air and recently noticed that my windows (8.1 pro) environment iTunes refuses to work with iPad by telling me that I need 64 bit version of the software. My environment is genuine Core i5 system with windows 8.1 pro 64 bit and iTunes is installed as instructed. I have removed all Apple components and reinstalled, but no success. One odd detail is that every time when Apple updater informs me that there is new iTunes available and I choose install option, installation fails and I have to remove manually all Apple components and then install iTunes. Installation seems to go fine, but during installation there is a phase when I can briefly see that system is rollbacking something - could this be vital? Like loosing something that makes system to refuse to install required things that make things work as they should? Like: are there known hw/sw issues that make installation process change installation from 64 bit to 32 bit during installation?
--IKemario

Apple iPad appears to be under "Portable Devices" section and driver is from Microsoft. There is no driver under USB-section and instructions that provided in first reply I have gone thru and they are no go with this problem - they are more likely for older iPod etc devices and dot with issue to deal with 64bit/32bit things. The picture (image.jpg) gives me unfortunately just general error...
--IKemario

Getting a Mini DisplayPort to VGA Adapter & Monitor to Work with an Xserve

First let me say that I'm very new to Xserve's and OS X Server and any help is greatly appreciated.
I have an Xserve with a connected Mini DisplayPort to VGA Adapter and a confirmed working VGA monitor. There is also a keyboard and mouse plugged into the front USB port of the Xserve. The internal SSD has been formatted clean.
I've been trying to boot up from the optical drive on the Xserve using the 10.6 DVD. I use the front panel/system identifier button to boot up and I make sure enclosure lock is unlocked. Each time I try to boot up, the monitor stays off and the DVD is spit out.
I eventually got the DVD to stay in, and the screen showed the grey screen with black apple and the spinning black circle on the bottom. However, after a few minutes the screen turned orange in color. Using Screen Sharing, it looked fine. I tried a second VGA monitor, but that still didn't do it.
So with the DVD still in, I stay connected via Screen Sharing and begin the installation process remotely, thinking Snow Leopard will recognize the monitor eventually. Well, 10.6 is now fully installed, but still no working monitor.
I then decided to try the Mini DisplayPort to VGA Firmware Update. I download and run the installer, but it tells me, "The Updater could not find a Mini DisplayPort to VGA Adapter to update."
How can I possibly get this monitor working?
Thanks in advance.
Message was edited by: nappy

Just ran in to this myself -- Nehalem Xserve running 10.6.2 Server with an MiniDisplayPort to VGA adapter connected to an Avocent Switchview 1000 KVM. Took the server offline to install RAM and after rebooting, no video. Oddly enough, the KVM's LEDs showed a display connected but Apple System Profiler showed no adapters connected to the video card. Nothing seemingly worked -- rebooting, shutdown/restart, and/or hot-plugging the adapter made no difference. I also tried a second MiniDisplayPort adapter to no avail.
Note that the MiniDisplayPort to VGA Firmware update had already been applied to BOTH adapters prior to this issue appearing.
What restored video output on our system: reboot from the Snow Leopard Server install media, video reappears over the adapter, and after that I can reboot from the SSD boot drive running 10.6.2 Server with video output working over the MiniDisplayPort to VGA adapter.

Mini displayport to vga adapter doesn't work. thoughts?

MacBook Pro, OS 10.7.5
apple mini displayport to VGA adapter + VGA cable to tv. galaxy image shows on tv screen, but computer signal doesn't seem to be getting there. have i missed something?
tnx!
Janeai

If it is showing the Galaxy image the signal is getting there. you have it set to Extended desktop. Go into the Dispplay section in System Preferences and chnge it to Mirror display, Check Box near the bottom of that window.

Why my new Mac mini DVI dual link mini display port adapter doesn't work with my 30"display (LG W3000H)?

Hello There
Can any of you advise on the below? Tried to connect Mac mini with a 30" display through a DVI dual link mini display port adapter. For the first try Mac mini go connected to the display, then i've chosen the highest resolution (2560x1600, native) and right at that moment they got disconected. Since then the display stays black. What can be the issue, is it possible DVI dual link mini display port adapter is not compatible with 30"display (LG W3000H)? It works with DVI male-male cable plus DVI HDMI adapter as long as the resolution stays under 1280x800. Any idea is much appreciated.
Thank you, Vera

Hi,
I can report that my Mac Mini Intel Duo connected instantly and without even having to set it up (on the first try) with my 1366x768 native resolution DELL 50" Plasma Display. It's so beautiful that I just want to stand there and fondle my HDTV as I drool haplessly like Homer Simpson with a doughnut in his mouth. Seriously, no problems.... guess I bought the right cable (ebay).
Before you buy a Duo, make sure you're aware of the airport and bluetooth issues that so many (maybe everyone who tries to use them together) are having. It seems that bluetooth interferes with airport, or maybe the other way around. Anyway, it's messed up. Also, Airport reception is generally VERY poor with the new Intel Mac Mini.
Despite these things, I still love mine (I now have 2 base stations and an airport express for my powerhouse wireless needs, and an external DLink bluetooth-2-USB dongle solved the bluetooth/airport issues... in my case).
FWIW,
awk
667-MHz Ti PowerBook G4. Mac OS X (10.3.9)

Universal cable + 10w charger doesn't work with iPad 1

I have a universal cable and 10w charger that works with my iPhone 4 and iPhone 3Gs, however my iPad 1 does not recognize it (as if it wasn't plugged in)

Hello marianaygreco,
Thanks for using Apple Support Communities.
To charge your iPad, please ensure you are using the correct adapter as is depicted below.
Identifying your USB power adapter
Picture
Agency marking
Name
Wattage
Works with…
Apple 10W
USB Power Adapter
10W
All iPhone models
iPad (3rd generation) and earlier
All iPad mini models
Apple 12W
USB Power Adapter
12W
All iPhone models
All iPad and iPad mini models
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Take care,
Alex H.

Wacom pens that work with iPad air and adobe photoshop touch?

I just saw the newest Wacom pen the Fineline and it's pressure sensitive but the last time I used a wacom pen on a ipad air it detected the pen but pressure sensitivity so is their any other pen including Wacom that I can use on iPad Air with pressure sensitivity works including adobe apps mainly photoshop touch.
Message was edited by: Devin Vanassche

Hi,
have you tried to install it over iTunes? This normally helps.
Thanks,
Ignacio

Does AutoCAD 360 works with iPad Air 16Gb Wifi version perfectly (as in all the instruments in AutoCAD Software) ???

I want specifically to know that does the Software AutoCAD works properly with iPad Air

The reviews are very mixed, but you can read the reviews here and see what you think:
https://itunes.apple.com/en/app/autocad-ws/id393149734?mt=8
I wouldn't expect to do any serious work in AutoCAD on any tablet or other touch-based device. It's not going to be suffficiently precise or efficient for all but the simplest edits, and almost certainly nowhere near as efficient as on a Mac. You can try it and see for yourself, though.
Regards.

Thunderbolt to Ethernet Adapter doesn't work with Retina MacBook Pro

I can't seem to connect to Ethernet with my Retina MacBook Pro. I bought an adapter and when I plugged it in, the network setup assistant showed that I was connected to the internet but my web browsers (Safari, Firefox and Chrome) couldn't connect, nor could any other programs (like Mail). The error message said that my computer was not connected to the internet, which did not match what Network Diagnositcs said. After a phone call with Apple Support, I had a replacement adapter mailed to me. With the new adapter, my computer now says that it is connected to the internet and I even have an IP address, but programs still can't connect and I get an error message saying the DNS lookup failed. This happens even when I manually enter the DNS server. I have already tried running the Thunderbolt software update 1.2.1 as well as the recent Thunderbolt firmware update, but the installer says they are not compatible with my computer. The problem occurs for both Thunderbolt ports. Is anyone else having this issue? I have no problem connecting to WiFi, so my temporary work around is using internet sharing on my old MacBook, which can connect to the ethernet connection in my apartment with no problems.

Hmm. Well I tried rebooting with wifi off but that didn't fix things for me. Would you mind sharing what your System Information says under Thunderbolt? This is what mine looks like:
MacBook Pro:
Vendor Name:          Apple, Inc.
Device Name:          Macintosh
UID:          0x0001000D1290C120
Firmware Version:          11.1
Port:
Status:          No devices connected
Link Status:          7
Link Controller Firmware Version:          0.11.4
Port:
Status:          Connected
Link Status:          2
Link Controller Firmware Version:          0.11.4
Thunderbolt to Gigabit Ethernet Adapter:
Vendor Name:          Apple, Inc.
Device Name:          Thunderbolt to Gigabit Ethernet Adapter
Vendor ID:          0x1
Device ID:          0x8003
Device Revision:          0x1
UID:          0x000100020059EBB0
Apple Serial Number:          DTN224606LWDWKHAX
Route String:          3
Firmware Version:          5.5
Port:
Status:          Connected
Link Status:          2
Port Micro Firmware Version:          0.0.8

IDoc Adapter doesn't work with LS

Hi,
we send IDocs through the XI System:
R/3 IDoc -> XI -> R/3 IDoc
First we set up a SEQJET02 IDoc with partner type LI and it works fine. Then we started with MATMAS05 and partner type LS and we get an uncaught exception at the inbound queue (SMQ2). The same channels are used on both scenarios.
The IDoc shows an error in queue in SXI_MONITOR.
I opened the same MATMAS IDoc in WE19 in the sender system and changed the header data from LS to LI and used a customer number as partner and the IDoc get through XI (of course it causes an error in the receiving system but it passed XI!)
Does anyone have an idea?
Regards
J.

Hi,
I have created an own receiver determination for this process without any partner information.
BTW: the function module that causes the exeption is SXMS_ASYNC_EXES
Regards
J.

VGA adapter doesn't work when plug it on data show-

i've tried to use my mbair linked to the datashow, but it doesn't show the content of power point document...How can i solve this problem? What are the possible solutions?
In my old PC i used to press "fn...F3" and the images were shown...how do i process it using my Mac?
thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Remote app doesn't work with ipad 2 and ios 7.0.3

Hi to everyone!
I have a problem with the remote app and my ipad 2 using ios 7.0.3
If I try to add a song to "next songs" the app crashes. But it works fine on the iphone 5 with ios 7.0.3
What could be the solution to solve this problem?

there's been an update for the remote app, now all works fine :-)

AppStore install button doesn't work on iPad Air 2

Dear Apple fans,
I'm suddenly having a weird issue with my 1 week old Air 2 (me and my dad got the same model, same store, same date): I can't download apps from the store anymore.
Whenever I click any random free app the button changes to ''install'' as it normally would. When I tap that I have to enter my code or use my finger, as is normal. But when that's over the normal download circle & pauze button do NOT appear; instead it reverts back to ''Free''.
This happens with every app, paid apps as well. It doesn't start the download, it doesn't give an error message. To make things worse: my dad has 0 issues on his device.
I CAN, however, re-download previously installed apps from the cloud just fine from the 'purchased' tab. Internet works fine. No other issues what-so-ever. Love the device.
Already tried:
Rebooting.
Re-logging.
Resetting (home + power button reset)
Combination of the above.
There are no apps waiting to be updated or downloaded and everything is up to date.
This is really annoying me since the device is otherwise perfect but I can't really be bothered to do a full firmware re-install... I hate doing stuff like that: I've got a Windows PC to annoy me with things such as that haha.
Any ideas? Thanks in advance!
-Kevin

Hi Kevin ...
Tap Settings > General > Reset > Reset All Settings
Then try downloading an app again.
No data is lost due to a reset.

Lightning to VGA adapter doesn't work with Ipad Air

Similar Messages

Maybe you are looking for