Lightning usb adapter and connecting devices

I purchased a lightning usb adapter and when i connect my wi drive to it, a message comes up sayin "device requires too much power" how do i fix this?

There is no "lightning USB adapter", per se. If you are referring to the Camera Connection Kit, the iPad does not support direct connection to external storage except for flash drives containing photos, and then only if the drive is set up in a very specific way. Please tell us what specific adapter you have and what this "drive" is that you are trying to connect.
BTW, you posted in a forum intended for 1990's era hardware. I've asked the Hosts to move the thread to the iPad forum.
Regards.

Similar Messages

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

Attaching VGA video adapter and Firewire device

I'm using the VGA video adapter to attach my brand new Mac mini to a VGA screen. As the space between video port and Firewire port is too narrow with the VGA video adapter attached I can't connect any Firewire cable!
Anyone who knows how to connect VGA video adapter and Firewire device at the same time?

The DVI-VGA adapter I got with my last mini was barely wider than the video port on the back of the mini and since a firewire connector is also barely wider than the FW port itself, there was no problem connecting to both at the same time, with a small but distinct space between. Indeed, it's about the same space as between the adapter and a cable plugged into the nearest of the USB ports on the other side.
If you're having problems, you might find that connecting the firewire cable first might help, but otherwise either the adapter or the connector on your firewire cable is non-standard. If you still can't connect both, take the mini, along with your firewire cable and the DVI-VGA adapter to an Apple store and ask them to try.

Where do you buy a lightning AV adapter and a HDMI to Micro-HDMI cable?

I need to connect my iphone 5s to the micovision projector. I have read that I need a Lightning AV adapter and a HDMI to Micro-HDMI cable. Where can this be purchased?

Hi,
You'll actually need a DCU-60 or DCU-61 for your T707 phone. The DCU-10 is for some of our much old phones.
This is your official purchase point for Australia http://se.mobilefulfilment.com.au/Products/ViewProduct.aspx?ProductVariantId=5D1102D4447541EBB7C8

Will the lightning USB adapter work with regular USB jump drives?

Will the lightning USB adapter work with regular USB jump drives?

Not really.
Technically, with some USB drives (I've had a 50% success rate) you can import photos or videos off the drive - thi those photos or video follow a very strict naming convention.
But you cannot import anything but photos or video and there is zero support to write off the iPad to the flash drive....so while it technically may work, it's so limited to effectively not work.

Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

Do as the image suggests, connect the device to a computer running iTunes.
If it is still not working, try posting in your native language.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

I just purchased Apple USB SuperDrive and connected to my Mac mini 2012 but does not show anything on the screen. Not sure if its working.

I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
I have OS X versus 10.10.3

The system bus and all connected products should appear in the system profile or in the
hardware part of About this Mac (more info) and if that does not, restart the computer with
the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
return trip to be rid of the SuperDrive, you could try a system management controller reset.
The SMC reset is not a first choice, so I won't post a link to the support instruction page.
A new Apple USB SuperDrive should be seen as hardware in system information report.
Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
Good luck & happy computing!

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

My ipad not turning on anymore even i charge it in the 10 watts adapter and connect it in my pc.. can you help me???

my ipad not turning on anymore even i charge it in the 10 watts adapter and connect it in my pc.. can you help me???

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.

HT4106 How much current the lightning/USB adapter can supply to an USB device

I bought a caméra terminated with a USB cable.
I want to connect that camera to my ipad mini using lightning to USB adapter
sold by Apple.
What is the maximum current supplied by the ipad mini through this adapter.?
Tks
Michel

The lightning to USB camera adapter cable doesn't provide output power. It only transfers the pic files from the camera. The camera's battery provides the power to operate the camera during this operation.
The lightning to USB cable is used to charge the iPad and the charger is rated at 10 or 12Watts of 5V power. So this cable carries 2+ Amps.
Why are you concerned?
 Cheers, Tom

Acquire RCA video using USB adapter and LabView

Hi,
I would like to know if it is possible to acquire RCA video using LabVIEW. I plan to use a RCA to USB adapter in order to connect the RCA device to my computer. What would I need to capture video using IMAQ USB driver? Thanks in advance for the help.
Best Regards,
Paulo

Hello,
Please take a look in the following discussion forum:
http://forums.ni.com/t5/LabVIEW/Acquiring-and-buffering-a-video-signal-without-additional/m-p/434391...
Thanks.
Best Regards
Luciano Borges
R&D Engineer
Pirelli Brazil

Which universal dock adapter and connection

Hi,
I like to find out which dock adapter is right for the ipod video 30GB? and does the new ipod accept USB 2.0 connection only? I tried firewire and it doesn't accept the connection,
thanks for reading,
Tom

My new 60gb doesn't fit in the dock that I had for my older 4th gen iPod. Although they are the same width. I think that you have to buy the new dock as it might be the only one that worrks with the 5th gen iPod.
No unfortunately Apple has dumped FireWire support for these new iPods, you can only sync with USB 2.0. Although I was dissapointed to see FireWire go USB 2.0 is pretty much the same speed.

Is there any way to adapt and connect an AppleTV to 30pin Digital Audio with Certified and Made for Ipod/Iphone only declared HiFi like Panasonic SC-PMX5EG-S to listen via Airplay my Digital Audio content only?

Please advice. I do not like to wire up this box by RCA-Audio jack or any other analog technology
btw.: Cheap Bluetooth modules do not work on this HiFi reciver and will be detected like: "unsupported device", because it is made for Apple* only...
Thank you in advanced,
Kind regards,
EinerMehr

The ATV does not connect to dock or lightning connectors. It connects to a TV or AV receiver.

Linksys usb adapter and TC

I'm planning on purchasing an iMac and using Time Capsule. Currently I'm running two Windows machines, using a Linksys wireless router. On my dying desktop, I'm using a linksys usb adapter. If I hook up the time capsule to my modem and configure my iMac (does it have to be ethernet wired to TC during setup process?} will I still be able to access the new TC router with my current linkys usb adapter or do I have to install some sort of TC software on my windows machine,which if so, would concern me, since I'm down to about 200mb on my C: drive and can't find much, other than restore points, to free up any space to install anything).
My plan is to transfer all my Windows stuff to new iMac and then retire this old desktop (while continuing to run a Windows XP sp2 laptop with built-in wireless b)
Thanks,
Mark

ATHiker95 wrote:
If I hook up the time capsule to my modem and configure my iMac (does it have to be ethernet wired to TC during setup process?
No, but that can be useful if AirPort Utility on the iMac has trouble "seeing" the TC.
will I still be able to access the new TC router with my current linkys usb adapter
I would expect so.
or do I have to install some sort of TC software on my windows machine
No.

Lightning usb adapter and connecting devices

Similar Messages

Maybe you are looking for