Lightromm to Photoshop

Why does not ctrl E Lightroom upon transfer to Photoshop as soon as it becomes a new version of any of the programs. Very annoying.

Moving to Lightroom forum.
Regards,
Romit Sinha

Similar Messages

Ich kann Adobe Photoshop Lightromm 5 nicht aktivieren

ich kann Adobe Photoshop Lightromm 5 nicht aktivieren

Unfortunately, this is very, very common on ebay. There are very few legitimate versions of PSE there, especially legitimate versions that haven't been used to qualify for upgrades, which makes them unsaleable. Your best bet is to dispute the charge with paypal, if the seller won't refund your money.

Lightromm 2.4 + Photoshop CS3 + NAS file save problems

I'm not sure if this has been asked before (I couldn't find it when I looked...) but I have the following problem.
I have a folder of JPG files on a NAS drive ( I'm using a Mac OSX 10.5.7 )
When I have Lightroom open I can't then edit and save the images. I have tried opening them from within Lightroom and get a file may be in use error when I try and save it. I have tried opening them via finder with CS3 and get the same error when I try and save them. If I then close lightroom it all works fine.
If I open a raw file from within Lightroom (also on the NAS) and save it Lightroom creates a PSD file (as i have asked it to do) and saves it without a problem. If I then go back to re-edit the PSD file and save it I get the same file may be in use error and can't save my changes. Again, if I close Lightroom I can then edit and save the file without a problem.
For some reason it looks as though lightroom locks all the files in the catalog that are stored on the NAS even when they are not being edited......
Any help gratefully received !!

It'll be no surprise to you to learn that LR isn't designed to work on networks. AFAIK, the workaround is as you've found: Quit LR, and the .lock is removed. I suppose you could delete the .lock file and keep LR open, but I can't recommend that.

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

I just downloaded Photoshop Lightroom and didn't get the serial number.....how do I retrieve it to register?

Just downloaded the Photoshop Lightromm and didn't get the serial number....how do I retrieve it to register?

Please notice that the "Thank you for your order." page that appears after you complete the online purchase contains the necessary key. If you printed the page or still can view it (perhaps by tracking your order), look in the "Order Summary" table near the bottom where it says "iWork '08 Trial - Serial Number" there is a "Key" below the "Part Number". This key is of the form (at least for mine):
xxxx-xxxx-xxxx-xxxx-xxxx-xxx
This is what can be entered into Numbers to unlock the trial. You do not need to wait for the email.

License problems with Photoshop CC

I Signed Adobe Cluod and down load and install Lightromm & Photoshop. Photoshop stops without an error messagel. I tried to logout and login, following the adobe solution, but allways asked me once to activate the license. I recivied a message with the confirmation that I can work with photoshop but ask me again for the same and still Photoshop continues in the samen statusclose without error message. Please can you hel me.
Thanks in advance.

Thanks for the update Plux14 you are correct that working directly with our support team would be the best option if you are facing difficulties with your Membership or activation. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.

Pgrogram Photoshop/Lightroom - Adobe Creative Cloud

Hello, I bought Photoshop and Lightromm program. I installed the Adobe Cloud, but the program does not load applications there is an error How can I fix this? Please, I need a solution urgently...I've done all the procedures but always appears the error and does not carry applications..Please helpe-me...
Thanks
Antonieta

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

Error in starting Adobe Bridge in Photoshop CS2

I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
I have reinstalled and click repair but to no avail
I followed Adobe Support Knowledgebase solution and run CMD and this appears:
c:Documents and Settings/Jesus M Ferraris>
then i entered the command
cacls c:\windows\installer /T /E /C /G administrators:F
but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
I also entered the next command
cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
still the same error as above appears, Please help, have I miss something or was my procedure correct...
P4, 512ram, WXP 80gHD

Very useful.
Good Luck.
My
Si
tes

Error: "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
Does anyone have any info as to what the problem may be and how to correct it.
Thanks

Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.

Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
Thanks, Anne

Adobe stock photos does not even exist anymore.
Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

Adobe Photoshop CS2 posterization problem on vignette

I am having a problem with posterization in my image. When I try to vignette my photo (with black) it starts to block up in areas, mostly in the darkest part of the gradient. It ends up not making a smooth transitional gradient and leaves a line where it blocks up. It shows up on the screen as well as on the print. I have a calibrated LaCie CRT 19" monitor, G5 and I am working from digital raw files from a Fuji S2 that are AdobeRGB and also film scans that have done the same thing. What can I do to prevent this? Is it something to do with my G5 or is it the software in Photoshop? If there is any info that left out to help solve the problem please let me know!
G5 Mac OS X (10.4.5)

If it shows up on screen and in print, then issue is with the software.
Adobe has forums. Might try there.
best wishes
David
Remember to mark an response helpful or solved.
It protects the integrity of the board.

Adobe Photoshop CS2 shuts itself down after printing..

Not sure whether I'm in the right place to post this..
In my workplace, we just bought some new iMacs for design class. They are a 2GHz with Intel Core Duo, and has 1GB 667 Mhz DDR2 SDRAM, and running Mac OSX 10.4.8.
The Photoshop CS2 is version 9.0
I've config-ed the five new iMacs so they can print to a printer, using IP printing. Problem is, most of the time after the students sends the document they want to print to the printer, Photoshop CS2 just shuts itself down. Then the dialog box saying 'the software just unexpectedly quit' appears.
It is confusing me, because our older iMacs (that's not an Intel-based) doesn't have this problem, at all.
is it something to do with CS2 compatibility with Intel-based Macs? or something else.. what needs to be done to stop this annoying problem?
Regards,
Meru
iMacs Mac OS X (10.4.8)
eMacs, iBook G4s Mac OS X (10.3.9)

Windows 7 error “key not valid for use in specified state” | The Oracle Instructor

Adobe Photoshop CS2

Topic
Photoshop CS2 and Nikon D200
Chuck Dell - 09:20am Dec 19, 2005 Pacific
Just purchased new Nikon D200. RAW Images will not open in Photoshop CS2. Receive Adobe Photoshop CS2 error message "Could not complete your request because of a program error." Images taken with this camera will open in Nikon Capture 4.4 and then can be transferred to CS2 But attempting to open RAW images directly with CS2 is futile.
Images taken with Nikon D2h and Nikon D100 flow perfectly through CS2
Only images taken with Nikon D200 will not open in CS2.
Is this Nikon problem or an Adobe problem?
Reply To This Discussion | Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages 2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Joseph liftik - 11:12am Dec 19, 05 PST (#1 of 2)
Wait for Adobe update on ARC that will support D200.
Post Reply | Bookmark
Chuck Dell - 12:11pm Dec 19, 05 PST (#2 of 2)
Excuse me, but what is ARC?
And does anyone know when Adobe will release supporting update?
Post Reply | Bookmark | Edit

upon importing i had the option of selection importinf from a "PICT Resource..."
this was the only option that allowed me to select my JPG images (digital caerma images, btw)
when i select and clikc OK, a message that comes up that says "There are no PICT resources in this file"
moreover, when i convert the JPG images to PICT images (via preview) i get the same message
strange, since i've been able to copy and past my JPG files all along until now...

Adobe Photoshop CS2 has encountered a problem and needs to close.

Just starting to get this error on open in CS2 after a few months of smooth sailing on a new system (below). CS2 now cannot open. It started occasionally and increased. Tried reinstalling. Tried deleting the PS config files and same error. Any suggestions?
Here's a sysinfo paste of my system.
Nick
XP pro SP2
Small Bus. Server network node
Profile- Username.DOMAIN
PHOTOSHOP
Photoshop CS2 (upgrade from ver. 6)
C:\Program Files\Adobe\Adobe Photoshop CS2\9.0
MB - ASUS P5K-E
Disk C: 819 GB Available, 931 GB Total, 819 GB Free
Disk D: 96 GB Available, 232 GB Total, 96 GB Free
Intel ICH8R/ICH9R SATA RAID Controller
Physical Memory 2048 MB Total, 1149 MB Free
Virtual Memory 4740 MB Total, 3900 MB Free
PageFile Name \??\C:\pagefile.sys
PageFile Size 800 MB
PageFile Name \??\D:\pagefile.sys
PageFile Size 2047 MB
One Physical Processor / 2 Cores / 2 Logical Processors / 64 bits
Intel Core2 Duo CPU E8400 @ 3.00GHz
Video1: ATI Radeon HD 3800 Series
Video2: ATI Radeon HD 2400 PRO
Memory Capacity 2048 MBytes
Slot 1
Corsair
CM2X1024-8500C5D
1024 MBytes
DDR2-800 (400 MHz) running 1066
64 bits
Voltage SSTL 1.8V
Slot 3
Corsair
CM2X1024-8500C5D
1024 MBytes
DDR2-800 (400 MHz) running 1066
64 bits
Voltage SSTL 1.8V

Just ran memtest and received no errors. This more or less clears the hardware. I have no idea how to proceed. Does adobe offer any direct support for this sort of problem?

Error 400 when trying to sign-in to Adobe Photoshop 9 [was:Error]

Getting an Error 400 when trying to sign-in to Adobe Photoshop 9. What is the problem?

http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Lightromm to Photoshop

Similar Messages

Maybe you are looking for