Lightroom 1.4.1 on Jaguar not printing

I had been using LR 1.4.1 on my old G5 running Tiger with no problems at all. Since moving my Lightroom catalog to a new MacBook Pro running Leopard I can't get Lightroom to print to my Epson R1900. LR sends the print job, but when I look at the print queue either every LR print is "stopped" and refuses to print (trying to force the job to resume never goes), or the print queue shows the job was completed immediately though the printer never even blinked. I don't have any problems printing from any other program. Weird thing is I tried printing a LR photo from my wife's iMac (also running Leopard and LR 1.4.1) and it's showing the same problem. Both Macs are using the latest Epson print driver (v6.20).
I've even tried installed the trial version of LR2 and it wouldn't print either. I've tried all combinations of settings, profiles, etc. and none of the LR jobs will print. Even trying to print it via Preview won't work. I've tried printing JPGs, DNGs, CR2s, and TIFFs... nothing prints.
Any help would be greatly appreciated. Thanks!
Kevin

I print to a 3800 from a MBP and an iMac.
I'd be inclined to trash the entire Printer folder and reinstall the driver from the Epson site, and do not let software "update" your Epson drivers. Delete the printer from the list, and then add the reinstalled drivers. Probably should throw a restart in there after the install.

Similar Messages

Lightroom 3 not printing

I recently updated my Lightroom 2 with the new Lightroom 3. Tonight for the first time I tried to print as I always did on Lightroom 2. When I hit the print button, in the "layout" pop up: print setting, color management, paper adjustment, and print option all have lines through them. When I click on one of them I get the prompt "The bundle "print setting" (or whichever I click on) could not be loaded because it does not contain a version for the current architecture." Does anyone know why this is? I never saw this in Lightroom 2.

Jeremy Enness wrote:
If you haven't done already, try going into 'Print Settings' and reselecting your printer in the Printer drop down box and then saving.
Thanks for the hint. I tried that but didn't help. I then went back to Ian's article on Computer Darkroom and started going through screen by screen to check everything. The problem turned out to be so silly I'm embarrassed to say: for pages to print, rather than "All" being checked, "From" was checked and it said "From 2 to 2", even though I was printing just one page. I can only assume that the last time I printed from Lightroom that is what I specified. I don't recall ever having a program save that particular setting.

Lightroom 2.5 not printing with main account user but prints with a new use

I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

Just trying again to see if anyone has any solutions for this question. Thanks

Printer not printing AND Matching Screen colors to Print colors. Any advice is apreciated!!

Hello - I have 2 questions regarding printing to an Epson and also regarding the monitor colors Not matching the print colors working from Photoshop CS4 on a Mac with a Maverick [ 10.9.3 ] OS. My issues are Not about my own printers or software. I have been tutoring a friend via phone in Photoshop; he has CS4 and is working on Mac OS 10.9.3.
1- We found that he could print nearly fine [ nearly accurate colors ] from Lightroom on his computer, version 5.4. But when he tries to print from Photoshop he cannot make a print. There is clear communication between the computer and the printer, as, when he sent the file to print, the printer [ an Epson 3880 ] responded by automatically changing to Photo Black from Matte. Then, it opens the rollers as if to print, but, it them stops and the menu [ on the Printer ] says 'Ready.' The paper is 4x6” Moab Lasal paper 300gsm. This issue of Not printing is only with this Moab Lasal luster paper, for which he Does have the IIC profile, and we always make sure ‘Photoshop manages colors,’ not the printer. To address the issue of the printer Not printing at all using a non-Epson brand paper, we have tried seemingly everything from deleting and re-adding the printer from the Library / Printers, resetting everything [ printer computer software etc ], trying different settings in the Printer window and the Print Settings window. Including changing the media profile, platen gap, etc.
2- My other and more important question is – after we Do get a print, we cannot match the monitor color to the print. [ We havE been able to get a print using Epson brand paper. Which is odd because we have the ICC profiles for both papers ]. To address the color matching issue, he has told me he calibrated the monitor with a Spyder, and here are a few other variables that I can relay that may or may not be affecting his color-issues:
He iS viewing his prints in a dayliglht-rated lighting environment
The monitor is an iMac glossy finish monitor, not an anti-glare
We tried working and printing from both an 8-bit and also a 16-bit color-space and also 16-bit printing
The color shift is slightly but noticeably toward Magenta.
His printer is Not calibrated
Please let me know what else we can do, any known glitches that may be an issue with his older version of CS, any tips you can suggest.
Thanks very much!

I don't have that printer and I'm not on Mac, so someone else has to step in there. Generally a green/magenta cast indicates none/double printer color management. But then I don't know what you mean by "slight".
The Spyders aren't the most consistent and reliable calibrators out there. I had a Spyder 3 sensor that I just threw away because it gave a distinct red cast (I have several other calibrators, so there was no doubt). Another potential problem is that with most calibrators you can only adjust the white point along the blue/yellow Kelvin scale, but not on the green/magenta scale. This is often necessary to get a good white point color. In this case you need to use the monitor's OSD controls, and if possible the "pre-calibration" function in the calibrator to measure and monitor it - if that function exists. And I don't know if this is possible with an iMac.
This is basically a question of getting the white point right, both on the blue/yellow and the green/magenta axis (and luminance of course). The goal is to get a visual match to paper white on screen. With the white point properly set, neutral color balance relates to that, and the rest more or less follows by itself. (In addition you should set the proper black point/contrast for full control, but that's not the issue here).

Printer not printing correct sizes of photos

Canon Pro9000 for some reason does not print photos correctly. I have made all the correct changes on the page setup and no matter what size I choose it prints only a small size photo. If I choose 11 X 14 it prints a photo 7 1/2 X 6. No matter what size paper I choose. It prints well in Easy-PhotoPrint but not in Lightroom 1.4.1 It worked fine before the driver update for Canon Pro9000
System I'm using is:
iMac 24"
2.16 GHz Intel Core 2 Duo
Memory 2GB 667 MHz DDR2 SDRAM
Printer Canon Pro9000
Adobe Lightroom 1.4.1
Thank You,
Mike M.

Had the same problem with Lr 3 and Canon Pro9000.
Flicked the stroke on and off again - for no reason except someone said that worked. Then I used zoom to fit and it worked.
Which is stupid. I am so sick of having to be in problem solving mode all the d**m time.
Next I'll work on the Wacom driver which freezes in Lr3 from time to time - with a complete lack of consistency.
I wonder why software works so badly these days. Shareholders don't care?

LR 4 - image does not appear in Preview and will not print`

The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?

The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
    Re: LR 4 - image does not appear in Preview and will not print`
    created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Epson printer 3880 will not print

iMac 2009
OSX 10.8.5
After upgrading from Snow lipard to Mountain Lion bouth my Epson R1900 and 3880 will not print in Adobe Lightroom 5.
I have checked in the PPD file and the R1900 is listed but the 3880is not. I ran update from the apt stor and also tried the Epsom web site updates and still it will not work. I also tried the cds that came with the printers and I get this"You cant open the application :Epson" because powerPC applications are no longer supported.
Please help if you can. Nemo

Have you downloaded the 3880 drivers? There is a driver for 10.8 listed. You can check the same link for the other printer.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 141552&prodoid=63085147&infoType=Downloads&detected=yes&platform=OSF_M_X8
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 94511&prodoid=63073901&infoType=Downloads&detected=yes&platform=OSF_M_X9

Lightroom 1.4.1 Now Available - Note from Adobe

Details here: http://blogs.adobe.com/lightroomjournal/2008/04/lightroom_141_and_camera_raw_4.html
Regards,
Tom

Just downloaded the mac version update (1.4.1) Works great EXCEPT printing has gone back to too much magenta (MacPro OS X 10.5.2, Epson 3800 printer).
I printed the same file from Lightroom 1.4.1, Lightroom beta 2.0, Aperture, & Adobe Photoshop CS3. Prints were identical from all except Lightroom 1.4.1. (Used print settings for no printer color management, profile pro38 PLPP, printing to Epson stylus pro 3800 printer)
With Lightroom 1.4.1 I get way too much magenta - not as bad as with 1.3.1, but still not usable.
Interestingly, the soft-proof for 1.4.1 looks good, but it does not print that way.
So, if I want to use Lightroom, I need to print elsewhere, or go back to 1.4 or wait for the 2.0 upgrade.

8500 does not show troubleshooter as turned on. It is on and will not print.

Had this printer for many years. No problems. It now will not print. Windows 7 troubleshooter says to turn on the printer and try again. The printer was and is powered up and will not print. I have cycled both the printer and the computer trying to sync them.

Uninstall LR from Control Panel—there may be more than one entry: Adobe Photoshop Lightroom, Photoshop Lightroom, Lightroom are all possibilities, then after LR has been uninstalled, log out of the CC Desktop app using Gear / Preferences / Account / Signout, reboot, and then see if LR shows up in the CC Apps list, after you give it a minute or two to contact Adobe’s servers. LR 5.6 is the current version which is probably what the update message is about.

Photoshop not printing to Epson R2400 in Snow Leopard

Hi there
I can print from Microsoft Word and Textpad fine. But Photoshop CS4 will not print anything to my Epson R2400. The job briefly appears in the queue, then disappears, with no error message.
When I try and Preview from inside the Epson Print dialogue, it just shows a blank page, so I'm pretty sure it's Photoshop that's at fault, as Previewing a similar job from Microsoft Word turns out fine.
Has anyone else had this error and found a way to fix it?

I've the exact same problem - though I'm using Lightroom 2.4 (64 bit) and Photoshop Elements 6 for Mac.
Printing from Textpad & Pages works fine - but every print from Lightroom and Photoshop Elements just disappears (like Monkeytennis2 described).
I've tried different drivers: the new 6.57 - and the older 6.12 (via Rosetta). The Gutenprint 5.2.3 works, but the quality is just miserable.
This is indeed a strange thing ... and I hope someone has an idea how to fix it.
EDIT: has anyone tried this http://forums.adobe.com/message/2215478 ... ?

CS6 does not print

windows7 Epson 2880 printer I can print in Lightroom with no problem. CS6 was printing okay. Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash. Just won 't print. My printer dialog box says error printing then recover file , but when i try again nothing. everything else seems okay. I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong. Is does CS6 haveto be re instalked ?
Thanks , Mike

This sounds more like a problem with the printer itself, or the printer driver.
Reinstalling Photoshop wouldn't have any effect.

File spooling but not printing - InD CS3

I am at a loss as to why InD CS3 (and Acrobat and Reader) will not print to a shared printer. Illustrator CS3 and Photoshop CS3 will print to this shared printer. Why not InD CS3? This has been ongoing since CS3 came out.
The file spools, all images and fonts are downloaded but the file never appears in the print queue. Not on the originating machine or the sharing machine. It just vanishes.
CS3 Pro versions Loaded on Mac G5 dual 2gig (non-intel) running Tiger. Three other machines have the same issue. All various machine configs (G4 single/Tiger, G5 dual 1.8/Tiger, and an Intel iMac/Leopard).
- Printer is shared through a networked G3 running Jaguar (yeah, yeah, working on it).
- The printer is an Epson SP1400
- All drivers updated on all machines.
- All CS3 patches done.
- Permissions done.
- OnyX system maintenance done.
- Preferences trashed. Machines restarted (printer and macs).
- The InD CS3 file can be printed from CS3 to a networked Panasonic postscript printer. So it's not the file.
- The InD file can be saved down using Interchange to CS2 and that will print to the shared printer.
- The InD CS3 file will print to this printer if the printer is connected directly to the machine it is printing from.
Apple and Epson have pointed out that because other CS3 apps do print to the printer, there is something going on with InD, Acrobat and Reader and the sharing function. Is it the G3 and Jag? Or something to do with CUPS or .local or a sharing protocol? Please help me out with this.

Anything interesting in the logs on the printing machine or the sharing machine?
In the Print button in the Adobe Print dialog, click the popup to Error Handling and tell it to cough up an error page if it fails to print. Maybe the printer will give you feedback about why it's failing then.
If that does nothing, then what if you print the file to postscript and drop the PS file onto the printer icon in the Dock? That would at least guarantee you were getting a file and let you experiment with why it isn't making it all the way through the process.
A final thought is to raster it completely [make a Transparency Flattener set to 100% raster @ whatever DPI] and see if just a bitmap will print correctly. That tells you if it's something weird with the postscript at least.
It's all guesses, really. But at least it might give you something new to play with... Best of luck!

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Laserjet 4100 on network will not print

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

HP Laserjet 4100 will not print in Snow Leopard

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?
Chuck Stewart
< Edited by Host >

Well, another week has gone by without a solution.
Again, here is the problem:
I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

Lightroom 1.4.1 on Jaguar not printing

Similar Messages

Maybe you are looking for