Lightroom 1.4.1 Windows question

A very minor point: how do I enter the copyright symbol from my keyboard into the file naming template? Thanks!

Hold the Alt key and type 0169 on the numeric keypad (not the numbers on top of the keyboard).

Similar Messages

Lightroom Installation Failed on Windows 8.1

While installing Lightroom cc on my windows 8.1, I met this message. Photoshop and illustrator have been installed successfully.
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.7.1.0 Adobe_Lightroom_x64.msi_5.7.1 ----------- ERROR: 오류 1935.An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002. ERROR: Install MSI payload failed with error: 1603 - 설치를 하는 동안 오류가 발생했습니다. MSI Error message: 오류 1935.An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002. ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603 -------------------------------------------------------------------------------------

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Screen resolution in Lightroom 4 on Lenovo windows 8

How can I increase the resolution so I can read the text

Hi Jim
Think Young, but it is already "large"
The text is so small that to Read need a magnifying glass to Read the text
The program is useless at present
Sendt fra min iPad
Den 07/04/2014 kl. 18.32 skrev Jim Wilde <[email protected]>:
Re: Screen resolution in Lightroom 4 on Lenovo windows 8
created by Jim Wilde in Photoshop Lightroom - View the full discussion
JIm, you can make the text larger....look at the Interface Tab on the Preferences menu and you'll see several different Font size options (although there are less on OSX apparently). Make a selection, then close and restart Lightroom for the change to take effect.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6278230-626541/450-184/Untitle d.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6278230#6278230
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6278230#6278230
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6278230#6278230. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a dual monitor setup. When I paste develop settings from one image to another, Lightroom switches the active window.

Strange problem. Lightroom 5.5. Windows 8.1. Dual monitor setup.
I'm processing a large batch of photos. I have Monitor #1 set as my main develop window, with Monitor #2 set only to display a larger version of the image I'm working with. If I copy the develop settings off of one image and try to paste them onto another image, Lightroom will switch from Monitor #1 to Monitor #2 as the main develop window, and will not display anything on Monitor #1.
If I then try to paste develop settings onto another image on Monitor #2, LR will then display a larger version of the image I'm working with on Monitor #1.
To work the way I want to, I have to continually drag my develop window back to Monitor #1 every time I try to paste develop settings onto a new image. How can I make this stop?

I just tried what I think you’re saying you’re doing and I don’t have the problem with LR 5.5 on Windows 7 SP 2.
Does the same thing happen whether you use the key shortcuts vs the Settings / Copy/Paste options on the menu?
I ask this because if you’re using the keyboard shortcuts, maybe you have some display-manager program that has bound itself to the Ctrl-Shift-V (paste settings) to the function of move-to-other-monitor which would do at least part of what you describe.
You can also test this theory by doing a Ctrl-Shift-V with an application other than LR as the active window and see if it moves. I suppose Ctrl-Shift-C might also play into it so try both of these hot-key combinations with a program that isn’t LR.
If none of this sheds any light on the situation, then give a more detailed description of the low-level functions you’re doing to accomplish the copy-paste of settings, so someone else could replicate the steps exactly.
Specific detailed steps, like:
left-click on source photo’s thumbnail in the filmstrip
press Ctrl-Shift-C to copy the settings
click Check-None
enable the white-balance and calibration checkboxes
click Ok
left-click on destination photo's thumbnail in the filmstrip
click on Settings / Paste Settings in LR’s menus to paste the settings to the selected photo

Lightroom 5.0 on Windows 7 - Photo Caption problem in Book Module

Using Lightroom 5.0 on Windows 7, I have produced a 76 page book in the Book Module with multiple photos on most pages, but two photos were not showing their captions, and did not print same in a proof PDF print run. I had the photo captions in the Meta Data, but have subsequently entered the pertinent photo caption via Custom Text from the left control panel, and also directly into the photo caption print box without success. I have changed the photo size, without a successful outcome, but when I did an auto cell fill of the photo the caption appeared within the photo, but disappeared when sizing was reduced back. I have exhausted all help avenues at this stage.

Frustrated Beginner wrote:
Thanks for your input and efforts to assist. I have resisted removing and replacing, as the 1966 passport photo has a lengthy (approx 60) adjustments showing in the history, as a result of its age. Hence I think that I will just have tolerate these somewhat minor, I suppose, aberrations and just send it off to Blurb as is, as restoring so many old photos to a more presentable print status has taken me 3 months as it is.
I don't understand why this a problem. You are removing a page from the book and adding back again. You are not removing the photo from the catalog, therefore you would not loose you are adjustments. Books are just another way of rendering photos.

Lightroom 4 usable on windows xp?

Does Lightroom 4 operate on Windows XP?
My system is XP pack 3, but when I try to install Lightroom 4 beta from the .exe I get Vista or 7 is needed. Does that mean that Lightroom 4 needs exclusively Vista or 7?
Thank YOU

Hi Icafiero!
No, LR4 will not run on XP. Here are the official minimum specs:
MAC
*Multicore Intel® processor with 64-bit support
*Mac OS X v10.6.8 (Snow Leopard) or v10.7 (Lion)
*2GB of RAM
*1GB of available hard-disk space
*1024x768 display
*DVD-ROM drive
*Internet connection required for Internet-based services*
WIN
*Intel® Pentium® 4 or AMD Athlon® 64 processor
*Microsoft® Windows Vista® with Service Pack 2 or Windows 7 with Service Pack 1
*2GB of RAM
*1GB of available hard-disk space
*1024x768 display
*DVD-ROM drive
*Internet connection required for Internet-based services*

I would like to use Lightroom. I have Windows desktop, Galaxy S5 phone(android), and iPad. Is this all compatible?

I would like to use Lightroom. I have Windows desktop, Galaxy S5 phone(android), and iPad. Is this all compatible?

Lightroom 5 is supported in Windows 7 or newer. You will be able to use Lightroom Mobile on the iPad, but Lightroom Mobile is not yet supported on Android devices. That support is suspected to be added sometime in the future. Also, take note that you must have a creative cloud account in order to use Lightroom mobile.

Problems installing Lightroom 4.4 on Windows 7 Ultimat 64bit

Hi everyone,
I have probplems installing Lightroom 4.4 on Windows 7 Ultimate 64bit and hope somebody can help me.
By the way: Lightromm 4.3 is still working fine.
Installation fails with the meassage
"Fehler beim Lesen von Datei: C:\Users\Markus\AppData\Local\Temp\{F7E7AEA5-5112-4244-B427-EC75DV1036A}\Adobe_Lightroom_ x64.msi. Überprüfen Sie, ob die Datei existiert und ob Sie darauf zugreifen können."
Translation:
Error on reading File: C:\Users\Markus\AppData\Local\Temp\{F7E7AEA5-5112-4244-B427-EC75DV1036A}\Adobe_Lightroom_ x64.msi Please check if the file exists and if you have access.
The file exists and I have access...
Any suggestions?
Markus

I was finally able to uninstall CS4 - it takes forever - and reinstall the original CS4 master suite on Windows 7. Then I used the help menu update tool to update directly from 4.0 - a download 930 MBs - that took a long time too - there must have been a huge number of folks downloading from Adobe last night. This morning, the updates worked and the 4.1 update is working smoothly with AVCHD and HDV and other functions all working.
Thanks everyone. As far as back up goes, I back up everything on separate drives. So if I'm currently working on a project, I'll have all the footage and project files duplicated on a separate drive. And, if it's a huge job, I may get paranoid and triple back it up
As far as backing up the system drive on my production machine - there's not much to back up - nothing other than CS4 and other plugins - in fact, I'll intentionally do a clean re-install once every 6 months or at least once a year just to humor myself.
But my test machine - now I have a deconstructionist approach - I'll try to break it just so I can then see what it takes to fix it!

Lightroom Developer turn off Windows 8.1 itself - Developer sammuttaa koneen

Lightroom Developer turn off Windows 8.1 itself
At first, I downloaded the pictures; Import pictures work properly and I can see the downloaded image on my desktop. Next, I press the Developer button in and the PC computer restart/shutdown!!!
Operating system is Windows 8.1 / 64 bit, RAM 16 GB, nVidia - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3, with NVIDIA GeForce GTX 970 card. Lightroom is installed SSD-drive (C:\) and Lightroom_Catalog is HDD drive D:\Lightroom. All my images are d:\pictures\.. folders or subfolders. What's the matter - what should I do?
Same in Finnish
Lightroom Developer sammuttaa koneen
Kuvat onnistuu ladata työpöydälle moitteetta. Kun painan ladatun kuvan kohdalla Developer-painiketta, koko Windows kaatuu/käynnistyy uudestaan. Muistia pitäisi olla riittävästi. Mitä tehdä, missä vika?

Hmm, not sure I completely understand now. What exactly simultaneously should mean in this context? The thing is that it seems there's no chance in getting the connection to work when I first turn on the client on my Windows computer. The other way (starting on my Linux computer) it works just fine, and I am able to connect from my Windows to my Linux anytime.
Also I'm not sure that this is the problem, cause it seems that same problem apply to connection to other computers as well (however this impression is based on a testing with just a very few tries, so I'll try to test it more soon).
Thanks for the explaining anyway!

Problem when start lightroom 6 on my windows 8.1 notebook

I have a problem when start lightroom 6 on my windows 8.1 notebook, the system says "impossible find input point in _crtCreateSymbolicLinkW in C:\windows\system32\msvcp110.dll", and lightroom 6 terminate. I disinstalled and reinstalled many times but I have always the same error. What is the problem? Thank for the answers.

Download update 4 for Intel x64 or Amd if your notebook have an Amd CPU of Visual studio 2012 and trya again. Before you can controll if the installer install library of visual studio 12 during installation and see if the library missing is on windows\system32.

Will Lightroom 3 run on windows 8

Will Lightroom 3 run on Windows 8?

You won't know until you try. Tpp many specifics involved. Same as with any legacy versions: Works for some, not for otehrs, may never work at all.
Mylenium

Help with importing lens profile to Lightroom 5.4 for Windows

Hi,
I'm running Adoble Lightroom 5.4 on Windows. I recently bought a Rokinon 14mm lens for Canon and have a couple lens profiles that I want to try out. I have already tried importing to the two following locations below and nothing showed up when I restarted Lightroom. Any solutions?@@
C: > Users > User > AppData > Roaming > Adobe > CameraRaw > LensProfiles > 1.0 > Then I created a folder called Downloaded > Then I created another folder inside the folder Downloaded called Rokinon and dropped the lens profiles in there.
Here is the other one I tried:
C: > Program Files > Adobe > Adobe Photoshop Lightroom 5.4 > Resources > LensProfiles > 1.0 > Then I created a folder called called Rokinon and dropped the lens profiles in there.

Something is weird about this lens profile file. It appears to be for a Canon 85mm lens, not a Samyang 14mm lens, and, as you say, this profile is for JPG files not RAW files. If you want it to apply to raw files you need to change the CameraRawProfile from False to True.
After changing the False to True, because the Make is set to Canon you have to go to the Canon lens list not the Samyang list in the Lens Profile selection dropdown list, or edit the Make to have Samyang..
Because there is an 85 for several focal-length numbers, not 14, I think the correction being applied may be totally wrong. Where did you get this lens profile file? The other profile file you sent has 50mm in some focal-length areas and 85 in others.
To be able to tell if this, or the other profile, is reasonable, you probably need to take a picture of something with a grid of lines, like a brick wall and see if there is barrel or pincushion distortion that is corrected or worsened.
Here is a screencapture of the file as it looks in a text editor with notes about what seems wrong:

No Print To File option in Photoshop Lightroom (Mac OS and Windows)

Q - Where do I find the "Print To File" option in Photoshop Lightroom (Mac OS and Windows)?
A - Photoshop Lightroom does not have the ability to print to file, but some print drivers can access the ability of the operating system to print to file. See
TechNote for further information.

If you use print to file then you get a file that is meant to be send to a printer and that file has all kind of formatting code for that specific printer.
Opening such a file in Firefox or a text editor can only work if you use a text only printer to print the file to, so make sure that such a printer is installed and selected.

Lightroom has stopped running windows is searching for a solution to the problem"

Lightroom stopped running on Vista 32 windows error message says "Lightroom has stopped running windows is searching for a solution to the problem"...Also some RAW images opened in CS2, Bridge or Lightroom have bands of different colors depending on the image and are unusable. At the same time Lightroom works fine on my laptop running Vista 32.

Are you looking at the images at 100% resolution? Banding can appear in other enlargements due to rounding errors.

Can Adobe Photoshop Lightroom 5 install on window xp?

can lightroom 5 install on window xp?

No.
Neither Lightroom 4 or 5 will run on XP.
The last version to run on XP was Lightroom 3 which is no longer available for sale
http://helpx.adobe.com/lightroom/kb/system-requirements-lightroom.html

Lightroom 1.4.1 Windows question

Similar Messages

Maybe you are looking for