Lightroom 2.0 Toolbar Configuration

Just installed LR 2, transfer of data from 1.4.1 went smoothly. The only glitch I have noticed so far is that I cannot configure ratings, labels etc on the toolbar at the bottom of the screen using the drop down menu on the rhs of the toolbar. Any ideas, thanks in advance

Tried that thanks, again no luck. By pure coincidence I have just upgraded my computer to Intel Quad core & 4gb Ram one day before the LR2 release. I therefore have a clean XP 32 bit, SP3 install and apart from this glitch everything else runs like a dream, including the setting of preferences via 'view options'. I think I will live the problem for now and see if anybody else has this issue. Again thanks for your help.

Similar Messages

  • Lightroom 4.3 toolbars

    For some strange reason the right hand side toolbars have all changed from color to B&W on me. I am NOT in B&W mode, I'm in Color develop mode. The usual color sliders have changed to all white and grey giving no color indications in any of the sub panels. The only thing thats in color is the Histogram. I can't figure out how to switch everyhting back to color and I've looked everywhere!
    Thanks in advance for any help!

    If you mean this issue, then it's because you've just upgraded to OS X Mavericks.
    http://helpx.adobe.com/lightroom/kb/sliders-lightroom-all-white-look.html
    This is fixed in Lightroom 5.2 and later (paid upgrade from Lightroom 4). Earlier versions are stuck with white sliders.

  • Adobe Acrobat Pro XI - I get different toolbar configurations when opening files.

    I have set up my Adobe Acrobat Pro XI with a selection of toolbars that suits my needs.  So far, so good.  Recently, however, when I open some files, I get a different set of tool bars that resembles the default version. 
    I have tried opening the files several ways (e.g. menu, double-click in Explorer, etc.).  It makes no difference what I do.
    How do I force Acrobat to open the files using my set of toolbars instead of this truncated version?  And why is this changing?

    Error Updating have you completed all of the steps listed in Error 1603: A fatal error occurred during installation?  Did you have any questions on any of the steps listed?

  • Mail Not Saving Toolbar Configuration Changes

    After recovering my mail by deleting the Mail Data Envelope Index files, any changes that I make to Mail's Toolbar do not save. I can make the changes (add the printer icon, etc.). Close the Message Viewer window. Open it again. Then they are there in the Toolbar. But when I quit Mail and open it again, the toolbar is back to its default (and the sidebar items are collapsed even if I expanded them all). Does anyone know where the Toolbar preferences are saved? I tried deleting the Mail preferences file in the Container folder in my Library. That did not solve the problem.

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • ICC profiles for Epson R1800 and Lightroom - Mac Osx

    Without trying to inflame an already heated discussion on prints that are too dark under my lightroom - printer - Mac Osx configuration. (Although I too am a sufferer of the darkness...!)
    I have recently downloaded the latest ICC profiles for the R1800 directly from Epson to my Mac. There are three of them and for arguments sake they cover the paper type I want "Premium Glossy Photo Paper"
    They download as a .sea file and not .icc as I expected.... My knowledge of Mac's doesnt extend to .sea files I'm afraid.
    My question is what do i do with the file now that its downoaded?... Nothing happens when you double click on it and It doesnt appear to try to find where to install itself.
    On another thread I read about dropping these files into Library - Colorsync - Profiles. They sit there happily but do not appear to show up in Lightroom when I wish to utilise the profiles.
    All the original Epson profiles are there from when I installed the Epson Drivers (new and updated) but no new profiles are there. This is definitely the case as the profile "Premium Glossy Photo Paper" is still there but its name should be changed to "Premium Photo Paper Glossy" according to the Epson website... Besides.. If I delete the new files and go back into Lightroom nothing has changed.
    Am i placing these files in the wrong area?
    Many thanks for any replies

    I suspect that some R1800 users have perhaps not tackled the issue of dark prints and may not be feel that they have an issue at all. I also believe that this particular issue only involves Intel Mac's which may not apply to some.
    Your issue may have something to do with the printer driver as well... I made sure that I went and found the very latest driver that Epson has out (there is a new one specifically for Intel Mac's). I made sure that I deleted the driver that came with the original disk.... I did this via the "printer setup utility"... then downloaded and installed the new driver.
    Only then did I go through the procedure for installing the new icc profiles as discussed...
    The profiles should then automatically appear in Lightroom and in colosync in the "Finder" screen under:
    " Users" > then whatever your computer name is > Library > Colorsync > Profiles
    The new profiles should then be seen.
    This is certainly the way I did it and perhaps the whole process has to be gone through for an Intel Mac.
    Hope this helps... I am nowhere near a computer expert but it worked for me.

  • How can I save my Toolbar-Configuation an import to another workstation?

    Hello together!
    Can anybody help my with saving toolbar-configurations?
    I want to Export them to another Workstation.
    Thx a lot.
    Greetz D.Lehner

    There is Windows 7 64 Bit Enterprise installed.
    Especially InDesign, Photoshop, Illustrator and Bridge.
    Thx D.Lehner

  • Lightroom creating large cr_sdk_*.tmp files

    I'm using Lightroom 4.1 RC2 on 64bit Windows 7. My C: drive is an SSD and only has about 8GB free. My catalog and Lightroom cache are both configured to live on my F: drive however, so I wouldn't have thought this would be a problem.
    What I'm finding is that after an hour or so of editing (in the Develop module only), I run out of space on my C: drive which causes Lightroom to exit, and other general system instability (eg Windows Explorer dies). It looks like Lightroom is creating large files in my temp directory (C:\Users\<username>\AppData\Local\Temp) called eg cr_sdk_03182513.tmp.
    What are these files for and why do they get so big? Can I configure Lightroom to store them elsewhere (ideally without relocating my temp dir)?

    Thanks Dorin. I'd performed a quick search of the forum but only found a few comments vaguely alluding to the problem, I missed these two threads.
    I realised I could relocate my tmp directory but figured the behaviour looked more like a bug in LR than sensible use of the temp dir. Sounds like I don't have much choice other than to live with it for now; I'll move my temp folder to a different drive and hope it gets addressed in an upcoming release.
    Thanks again,
    Chris

  • How to Target Toolbar id

    Hi,
    While doing Toobar configuration I need to enter "Target ToolBar Id". How to get this? Can somebody thru light on this,please?
    With Regards,
    Jaheer

    Hi Jaheer,
    Go to the page where you want to apply the toolbar configuration and click on Resource Guide link at the top of the page (next to setup link). Click on Toolbar View and you should see the toolbar ids for that page.
    Hope this helps.
    Regards,
    Vikram

  • HP Smart Web Printing feature, problem with IE7 and FireFox3

    "HP Smart Web Printing" problem with Internet Explorer 7 and FireFox 3I have a laptop that came with: Windows Vista Home Premium, Internet Explorer 7, FireFox 1.9. Everything worked fine.
    Recently I bought a "HP Photosmart C4580 All-in-One" printer that came with a free software "HP Smart Web Printing".
    Smart Web Printing worked fine with FireFox 1.9 browser. I liked it very much, because with it, I could print only the portions from the web page that I want, thus saving on inks. It really does more than that.
    With IE 7, Smart Web Printing was a disaster. IE 7 stopped working. Every time I closed a web browser window, IE7 would stop working and start all over again. It happened all the time.
    On suggestion from Microsoft Windows help desk I "Reset IE Setting". This solved the IE 7 problem , but it also removed the Smart Web Printing feature.
    Next, one day I downloaded latest version of FireFox browser "FireFox 3". Once again I lost the Smart Web Printing Feature, because it was not compatible with FireFox 3.
     Now here I am with no "Smart Web Printing" feature at all.
     Any suggestion how can I get "Smart Web Printing" feature back. I love the feature
    Thanks

    March 27th 2009 I've just downloaded HP Smart Web Print onto an HP a6500f desktop system running Vista-64.  I first installed it as a limited user and I get no icon in the IE7 taskbar.  I examined the manage add-ons dialog and it was installed but the toolbar configuration has no control icon for SWP icon.
    Then I logged off and logged on as a privileged user and downloaded again and tried to install.  This 2nd installation actually REMOVED my first installation.
    So I then downloaded for a third time and installed and it finished installing but there was no SWP icon in the tool bar.  I examined the Manage Add-Ons dialog and saw one in there on the left side.  I transfered the inactive icon to the active side of the dialog and then I immediately had TWO SWP icons in the task bar. (*mumble grumble*).  So I removed one and all is OK now as long as I use the IE7 as a privileged user. 
    If I go back to being a limited user (not an unreasonable thing to do is it?) I don't have an SWP icon.  Trying to install SWP application again only cause it to want to remove the existing installation.
    I'm not very impressed with this behavior. 
    Is there anything that can be done to get SWP to work for limited users?

  • How can I make my current Firefox settings the default settings, so that PC Tools won't delete the menu bar?

    I use PS Tools Performance Toolkit to clean/repair my (Vista) registry. When the utility runs, Firefox closes. When I start Firefox again, the appearance on screen has been reset to default -- no menu bar and the the web address line is scrambled. All the settings can be manually corrected, but can I prevent it from changing in the first place.

    Can you configure your external software not to clear your Firefox settings (as opposed to, say, cookies and history)?
    Unfortunately, there is no handy backup file of toolbar configuration information (localstore.rdf) to restore, so you would need to build your own system to restore it.

  • Save drag and drop layout

    Hi Folks,
    Can anyone tell me the best way to do this. I need to save the layout of my page:
    http://www.sandwell.nhs.uk/test/test.html
    I'd like to store the page layout in a database, but I dont understand how to capure the DOM, would I need to save the ID's of each moveable element in a list, and save that to a database?
    How would i save the items in a list?
    I can't find much on the web about how this works at all.
    Any help much appreciated.
    many thanks

    Hi,
    Which Siebel Application you are using. There is a "Application" dropdown in the tools for the weblayout.
    Enable that in the tools: View - Toolbars - Configuration Context. Check the Application dropdown value. is that the Siebel Application you are using. Its better to add the fields in the "All Applications" dropdown. Else you are seeing in a wrong application or adding in a wrong application. This is the cause of the mismatch. No problem with WebLayout. Check and let me know.
    Regards,
    Joseph

  • How do I get rid of title bar?

    When I installed Firefox on my new Windows 8 computer, I got a style in which there is no title bar. The tabs are up there with an orange Firefox button at the left. It provides access to the menu items. I like that. However, I wanted the function of my profile on a Windows 7 machine. (Lots of stuff in there.) When I installed that, it put me back in a situation where there is a title bar unnecessarily wasting some vertical screen space. In that Windows 7 profile, I was using the Tiny Menu addon to compress the menu items onto a single button. It is on a line with the Location bar and the search bar. The tabs are below. I cannot figure out what to tweak in the profile from my Windows 7 to get to the appearance I like in the Windows 8 install.
    I tried the advice here: http://www.squidoo.com/hide-firefox-title-bar
    I don't see any Tabs on Top setting, and browser.tabs.drawInTitlebar is already set to true. When I disable the Menu toolbar, the title bar goes away and the tabs are up there with the orange Firefox button; however, I lose the Location bar and the search bar altogether.
    There's got to be a way to fix this. Any help would be appreciated.

    Something very weird is going on. I achieved a brief success as follows:
    Not sure exactly what did it. With Task Bar Plus, Stylish, All-in-One Sidebar, and the bookmarks toolbar disabled, I did do that reset to defaults for the toolbar. I had skipped that earlier because I did not see how it was going to affect the tab bar and my toolbar configuration (with All-in-one Side Bar) is fairly complicated. However, I was getting desperate. It still did not solve the problem directly. However, when I enabled the Navigation Bar, success! The odd thing is that I had fiddled with enabling the Navigation bar on multiple previous occasions with no luck; so I am still not sure exactly what happened. I thought the problem was solved. But it was not:
    Then I started experimenting to figure out what had been causing it. I enabled all those things (except the bookmarks bar). It stopped working. I disabled Tab Mix Plus, and I got a brief success at the first instant when I enabled the Navigation bar. Then I restarted Firefox, and it did not work then or after any subsequent restart. I have gone so far as to restart in safe mode with all addons disabled. It still does not work right. I go back to the profile from the Windows 8 install, and all is well again.
    What is going on? I may have to give up and further develop the profile from Windows 8 to come closer to the function I had in Windows 7; but I dread that process.

  • Claws-mail 3.4.0 problem (not libetpan related).

    After the upgrade of claws-mail does not start anymore.
    It shows a brief white flash and it stops. The process seems running and the --debug log quite normal.
    I use a x86_64 archlinux.
    Now I try to downgrade.
    Any idea?
    $ claws-mail --debug
    claws.c:98:Starting Claws Mail version Claws Mail 3.4.0
    main.c:833:GTK+ 2.12.9 / GLib 2.16.3
    main.c:841:Compiled-in features:
    main.c:846: compface
    main.c:852: aspell
    main.c:864: ipv6
    main.c:870: iconv
    main.c:882: ldap
    main.c:888: libetpan 0.54
    main.c:900: libsm
    main.c:912: openssl
    prefs_gtk.c:1034:new file '/home/ezzetabi/.claws-mail/clawsrc'
    prefs_gtk.c:993:new section 'Common'
    prefs_gtk.c:993:new section 'Plugins_Common'
    prefs_gtk.c:993:new section 'Plugins_GTK2'
    prefs_gtk.c:1034:new file '/home/ezzetabi/.claws-mail/folderitemrc'
    prefs_gtk.c:972:cache: /home/ezzetabi/.claws-mail/folderitemrc: No such file or directory
    prefs_gtk.c:1072:destroying cache
    main.c:2325:/dev/mem_notify not available (No such file or directory)
    current dir: /home/ezzetabi
    prefs.c:283:Found [Plugins_Common]
    current dir: /home/ezzetabi/.claws-mail
    current dir: /home/ezzetabi
    folder.c:121:registering folder class mh
    folder.c:121:registering folder class imap
    folder.c:121:registering folder class news
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Common]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_themes.c:366:Creating preferences for themes...
    stock_pixmap.c:549:dir /home/ezzetabi/.claws-mail/themes not found, skipping theme scanstock_pixmap.c:549:dir /usr/share/claws-mail/themes not found, skipping theme scanprefs_actions.c:390:Reading actions configurations...
    prefs_display_header.c:432:Reading configuration for displaying headers...
    addressbook.c:4068:Reading address index...
    addressbook.c:4117:done.
    mainwindow.c:1547:Creating main window...
    toolbar.c:728:read Toolbar Configuration from toolbar_main.xml
    folderview.c:644:Creating folder view...
    folderview.c:479:creating tree...
    hooks.c:70:registed new hook for 'folder_update' as id 1
    hooks.c:70:registed new hook for 'folder_item_update' as id 1
    summaryview.c:633:Creating summary view...
    hooks.c:70:registed new hook for 'msginfo_update' as id 1
    hooks.c:70:registed new hook for 'folder_item_update' as id 2
    hooks.c:70:registed new hook for 'folder_update' as id 2
    messageview.c:437:Creating message view...
    headerview.c:89:Creating header view...
    noticeview.c:77:Creating notice view...
    mimeview.c:249:Creating MIME view...
    noticeview.c:77:Creating notice view...
    textview.c:269:Creating text view...
    hooks.c:70:registed new hook for 'msginfo_update' as id 2
    logwindow.c:94:Creating log window...
    hooks.c:70:registed new hook for 'log_append_text' as id 1
    logwindow.c:94:Creating log window...
    hooks.c:70:registed new hook for 'debug_append_text' as id 1
    mainwindow.c:1825:done.
    mainwindow.c:3206:Setting widgets... mainwindow.c:3428:done.
    hooks.c:70:registed new hook for 'sslcert_ask' as id 1
    hooks.c:70:registed new hook for 'progressindicator_hooklist' as id 1
    account.c:198:Reading all config for each account...
    account.c:213:Found label: Account: 1
    account.c:213:Found label: Account: 2
    account.c:213:Found label: Account: 3
    codeconv.c:1438:current locale: en_US.utf8
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 1]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_customheader.c:325:Reading custom header configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 2]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_customheader.c:325:Reading custom header configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:122:Found [Account: 3]
    prefs_gtk.c:147:Finished reading configuration.
    prefs_customheader.c:325:Reading custom header configuration...
    folderview.c:392:setting titles...
    folderview.c:807:Setting folder info...
    summaryview.c:1237:empty folder ((nil) (null) (nil) 0)
    summaryview.c:1257:TIMING summary_show : 0s001ms
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    prefs_gtk.c:85:Reading configuration...
    folderview.c:807:Setting folder info...
    folderview.c:807:Setting folder info...
    prefs.c:283:Found [Plugins_GTK2]
    prefs_gtk.c:1069:no cache
    main.c:1510:TIMING main startup: 0s544ms
    I pressed CTRL-C
    main.c:2258:Quitting on signal 2
    main.c:1551:shutting down
    mainwindow.c:2573:main window position: 0, 0
    prefs_gtk.c:286:Found [Common]
    prefs_gtk.c:330:Configuration is saved.
    addressbook.c:4280:Saving address books...
    addressbook.c:4283:Exporting addressbook to file...
    prefs_themes.c:411:Finished preferences for themes.

    Thanks for the answers so far. Thank You, leonieDF, your anwer helped me to see it clear what's about Aperture and Portrait Professional. I have to wait for an update for PP. And the same is to you, William
    Actually I help myself by using PP as an external editor in Aperture. After using PP I have to import the edited Pic back to Aperture. I's not very funny but there is no other way at the moment.
    But I don't understand why the synchro with Facebook does not work for me. Has anyone the same problems with Aperture and Facebook? Details: uploading to FB is working fine - but Aperture has got problems when I try to synchronize older FB gallerys of my Account.

  • Black lines around fields I tab to incl. button, p-d menus

    Something weird is going on with my computer: there's a black square around the active field in every app on my PowerBook. For example, if I open a new window in Mail, there's a black line around the New Message icon (the upper-left-most icon in my toolbar configuration). When I start typing in the address field, the black line moves to that field. If I hit Tab, the black line goes to "cc:" then "subject" then the "add bcc..." pulldown menu, then the "account" and finally "signature" pulldown menus, before going to the message window. It's basically the same thing in every app-- an ugly square of thick black lines around every active field in the app I'm working in. I poked around Universal Access in System Prefs & nothing helped. I think my daughter was playing with the computer & did something to it but she's only a year old so I can't ask her! Please help me get rid of this thing! Thanks

    Hi There
    Have you tried System Preferences > Universal Access > Seeing > Voiceover:(Check) and click 'off'.
    Worked for me!

  • CRM 7.0 - Communication Management Software - CTI

    Hi,
    We are in process of configuring Contact Center Simulator.
    The fact is that we don't have JAVA stack on CRM 7.0 system, rather we are using different system for JAVA stack.
    We have successfully done with RFC connection in CRM 7.0 pointing to JAVA stack system and other required config settings.
    When user click 'Ready' button from UI, it gives error 'Communication management software system is not configured'.
    Does any body has experenced this or did I missed out any step?
    Regards,
    Nilesh P

    Hi Nilesh,
    Here are a few things to check:
    1. Look at the ICI trace log and see what kind of message is being returned
    2. Double-check your toolbar configuration - this often gets overlooked - you need a toolbar for voice configured
    3. Check that the system where the Java stack resides can "see" and connect to your CRM 7.0 system - if there is a firewall between the two or if there is some other network reason that communication might be getting blocked. look at the ICI trace log and see what url is being passed in the subscribe command, then put that URL into a web browser on the java server to verify that it can call back to the CRM system
    Hope this helps. I have done that same thing before so I know it works.
    Sincerely,
    Glenn
    Glenn Abel
    Covington Creative
    www.covingtoncreative.com

Maybe you are looking for