Lightroom 2..2 Crashes (XP): Two things that seemed to help
Like a number of other users, I have experienced a record number of crashes since I upgraded to Lightroom 2.0. 2.2 only made it worse. I have tried most of the steps recommended in the FAQ, without much success. Here are a couple of fixes I have tried that seem to substantially reduce, though not eliminate, crashes for me. YMMV.
1. I run AVG antivirus software. I disabled the "Resident Shield" option. This is the internal monitoring function that scans files as they are copied, opened and saved. Lightroom generates a huge number of files. Disabling this function seemed to help. I believe several other anti virus software programs like Norton have similar functions that monitor internal processes that can be defeated.(This is a relatively recent "innovation" in virus software.)
2. When it was really getting buggy, rather than do a complete uninstall/reinstall of Lightroom 2.2, I left the current install on the machine, launched the 2.2 upgrade installer and selected "Repair" rather than "install." That went pretty quick and when I relaunced, performance was substantially better with greatly reduced crashes. I know this may seem ridiculously elementary, but it made a difference.
Having said that, as others have pointed out, using the brush function vigorously still just about guarantees a crash is in my near future, so when I am using the brush, I regularly exit and relaunch the application.
Adobe, why isn't there a "Save" command so I don't have to exit? That would make living with this buggy release a lot easier.
Hope this helps.
WW
My thoughts exactly. A good thing about Lightroom is that it does "save" your changes almost immediately, so you don't lose all of them in a crash. That is probably why Adobe does not have a "Save" command.
The problem is that Adobe did not count on an application that can freeze solid like Arctic Tundra every 20-minutes or so. Preemptively exiting and relaunching helps avoid that by (apparently) resetting resources. A "save" command that performs the same function would be faster & easier.
WW
Similar Messages
-
Apple Tv (3rd generation) says it is connected (via ethernet), but none of the app, or channels, will work. They all say they are unvailable, try again later. The only thing that seems to work is iTunes. (I live in a dorm if that helps)
Its not properly connected to the network. Most school networks require login via webpage, which isn't possible as ATV has no browser. You will need to contact the IT dept or the network provider.
-
No calls are going through or coming in, also my sms/mms does not work the only thing that seems to be working is mobile internet anyone help???
When I try calling someone it beeps twice and says 'call failed' also when someone tries calling me it does not come through. Also SMS/MMS cannot be sent or recieved. Only mobile internet is working
iPhone 5s
ANYONE HELP???Restart your phone by holding the power and home button until the Apple logo appears. If that does not solve the issue contact your cell provider so they can resolve the issue.
-
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
-
I've noticed two things my Ipad no longer does, If I save an image from an internet graphic file - facebook or whatever, the photo used to be saved to photostream... it no longer saves it to anywhere. Also having made sure all the boxes are ticked with photostream and ICloud and not knowingly changed anything, photos take with Ipad/photostream no longer end up in icloud and available to other machines eg. windows pc. Anyone got any suggestions?
Try here:
iPod touch: Hardware troubleshooting
iOS: Not responding or does not turn on
To get the calender and contacts back if you can't get the iPod working is to restore the new iPod from the backup of the old one. -
Two things that bug me with my T400
I got a T400 and I have it how i like it except for two things:
1.) The harddrive light flicks about every second or shorter. What is accessing my hard drive all the time? (I installed a SSD but I think it did the same thing before I installed it)
2.) The lenovo service take FOREVER to startup. I try to bring up the internet (Fn+F5) or the ThinkVantage button and it thinks a for little and then NOTHING COMES UP. I have to wait about 10 minutes after startup and then click I can click the button and the service will start
I've updated both my Lenovo service and Windows. What can I do to fix this?@Elmware
Which headphone settings do you have on the Music app?
settings > audio settings > sound effects > headphone settings
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Two things that apple needs to do...
apple, pleeeease bring back the brushed metal. it was a nice touch.
i understand that it was replaced as a backing with plastic to improve gps tracking. that makes sense - but wouldn't it make sense to replace the tacky looking silver plastic edging with brushed metal? it wouldn't interfer with gps reception and would bring back some of the class the brushed metal casing brought to the design.but wouldn't it make sense to replace the tacky looking silver plastic edging with brushed metal?
Not from a financial perspective.
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch) -
Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems. -
How do I improve the performance of my Macbook Pro (os 10.6.8) ...I previously had "mackeeper" but apple staff advised to get rid of it as
I did not need to improve performance and this software was not apple recommended and tends to cause more problems > But lately my computer is running extremely slow ...Not opening programs and freezing ?.......I miss the mackeeper as it would tell me about duplicate files...temporary and "clean Up" which semed to help ...........Isnt there any way to increase performance manually ? Help pleaseWell MacKeeper comes close to qualifying as junk, as malware even, and totally takes over and interferes with a system and then is hard to uninstall and remove.
In addition to the above, BitDefender has a free utility as well to remove adware.
"Less is more."
There is no real valid reason to install and use this or other apps to clean or improve system performance. Adding more RAM can help of course if yours has minimum, upgrading the system storage drive almost always helps as SSDs have gotten better and available in any system.
the more 'stuff' that gets installed, the more problems with stability, performance, and the system working as it should.
"Too many cooks spoil the soup." -
Anonymous UUID: 394498C3-A77C-DEE2-E84F-B124F1F29240
Mon Feb 17 22:09:58 2014
panic(cpu 1 caller 0xffffff80186dc19e): Kernel trap at 0xffffff8018541110, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8018541110, CR3: 0x000000006ab66000, CR4: 0x0000000000000660
RAX: 0x000000001be3bdb1, RBX: 0xffffff8023f81408, RCX: 0x000000000000000c, RDX: 0xffffff802894be90
RSP: 0xffffff8098273828, RBP: 0xffffff80982738d0, RSI: 0xffffff8098273c70, RDI: 0xffffff8018ceeae0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x000000000000001d, R11: 0x0000000000000246
R12: 0x000000001be3bdb1, R13: 0xffffff8098273c70, R14: 0xffffff8023f814c4, R15: 0xffffff8018ceeae0
RFL: 0x0000000000010282, RIP: 0xffffff8018541110, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8018541110, Error code: 0x0000000000000010, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80982734b0 : 0xffffff8018622f69
0xffffff8098273530 : 0xffffff80186dc19e
0xffffff8098273700 : 0xffffff80186f3606
0xffffff8098273720 : 0xffffff8018541110
0xffffff80982738d0 : 0xffffff8018811d38
0xffffff8098273940 : 0xffffff80187fc9db
0xffffff80982739a0 : 0xffffff80187d544b
0xffffff8098273a20 : 0xffffff80187d4da4
0xffffff8098273ae0 : 0xffffff80187f3dc6
0xffffff8098273b80 : 0xffffff80187e5f15
0xffffff8098273c30 : 0xffffff80187e67d2
0xffffff8098273f50 : 0xffffff8018a3de23
0xffffff8098273fb0 : 0xffffff80186f3e06
BSD process name corresponding to current thread: fsck_msdos
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000018400000
Kernel text base: 0xffffff8018600000
System model name: iMac7,1 (Mac-F42386C8)
System uptime in nanoseconds: 260732062621
last loaded kext at 32683580624: com.apple.driver.AppleBluetoothHIDKeyboard 170.15 (addr 0xffffff7f9a1c9000, size 24576)
last unloaded kext at 213959498726: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9a3ff000, size 8192)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.ATIRadeonX2000 8.1.8
com.apple.kext.AMD2600Controller 1.1.4
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleRTC 2.0
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBUHCI 650.4.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.kext.triggers 1.0
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.21f4
Graphics: ATI Radeon HD 2600 Pro, ATI,RadeonHD2600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F1900000000, 0x4D4943533338554642203247422020202020
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F1900000000, 0x4D4943533338554642203247422020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.0f6 12982, 3 services, 22 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD3200AAJS-40RYA0, 320.07 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Built-in iSight
USB Device: USB2.0 Hub
USB Device: Photosmart 8100 series
USB Device: ScanSnap S510M
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: IR Receiver
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation may solve a problem that isn't solved by reinstalling in place.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Apple Diagnostics or the Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test, if applicable.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
Otherwise, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you. -
Lightroom continues to crash. Would appreciate anyone who can help with this. Been going on for two days now and I am getting nothing done. Will accept any and all suggestions.
My ultimate solution. In frustration I deleted everything I could find on my Mac connected with Lightroom, CC, Flash, Adobe AIR, etc., etc., including suspport and preference files in my account and in root. Ran CC Cleaner Tool until there was nothing left.
Then I gingerly started rebuilding the installation by first re-installing the CC Desktop app. After that (and singing in with my Adobe ID) I re-downloaded my Apps (Lightroom CC and Photoshop CC). A couple (maybe 3) times the results showed the apps were installed but needed updates, which were tagged as "failed". Logging in and out of CC Desktop eventually led to stable functional installation and Im back to using LR(CC) and P'shop(CC) without difficulty.
My speculation? After several years of downloading and sometimes deleting various Adobe stuff there was something on my HD, probably in some obscure Application Support folder or a preferences folder that was causing the current CC Desktop installer to choke.
What bugs me is that Adobe seems to have (despite some fine products) a curiously self-centered approach to living within the Apple OS system. No other application I own has got such a convoluted and easily upset installation process. -
So there are two things that drive me crazy when using Muse, both of which are a huge inconvenience to the site builder and the customer:
1 - All text is automatically turned into image when lived.
2 - You can't link text directly in a paragraph. You have to leave an empty space and then try to line up an individual menu link with the text.
I really hope the newer versions of MUSE fix this. Or is there a way to avoid these problems that I'm not aware of?Hello HWheeler,
I posted this information on your idea as well, but I will address it here so others can see it.
Likely if the text is being turned into an image, you are using a non-websafe font. Muse does this to ensure that all users will see it the same, regardless of whether or not the user has that font installed. Using web-safe fonts (on the web-safe font list) allow you to export the item as text, which can be selected, copy/pasted, etc.
Likely, this issue stems from the first. Using a websafe font, you can select the text you want to turn into a link, and then in the control strip (just above the page) use the Hyperlink box to link the text to an URL or page you'd like.
Regards, -
TV 23EL933G - Two things for nex firmware update
My girlfriend offered me this television as a birthday present and I really like that but I have two things that maybe Toshiba can give us in the next firmaware update.
These two things are:
- DTS sound: The quality of 1080p mkv files is amazing but without DTS sound loose some of the fun;
- Subtitles: I think the size of subtitles is too small and I dont like the yellow color so I hope that in the next firmware we can choose the subtitles color and size.
Best regardsI would like to add a few other observation about this TV:
# the *Channel Skip* function should +HIDE+ the removed channel from the *Channel Sort* list as well, and the remaining channel should be renumbered accordingly *automatically*: I would like to see a *Delete* function too.
# there should be some _huge improvements_ on the *Channel Sort* functions: it's a real pain to have the channels moved to a specific position with the only option available (+Swap+) as you have to spend a lot of time reordering the list, and navigate through all the skipped channels as well that are not marked and separated from the active ones. A *Move* function should be available here. Again the Auto-Renumber for the channels would be most welcomed and handy.
# I would also like to have the *Return* button to swap between the last seen channels: I use this function a lot with another decoder I use and it's handy when you like to monitor two numeric distant channels.
# since a timer function is already working, I would also appreciate to have the possibility to *Record a video* to the USB!
I hope the Toshiba Devs can read these feed backs and implement them in the next Firmware!
Thanks for reading -
The original computer I installed lightroom 3 on, has crashed and I need to install it on my new computer. I can't seem to figure out how to do that. Please help?
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
So, my worst fear came true,
I've droped my ihpone in the toilet and it was off. It went off before was able to pick it up.
I've tried to dry it in rice and after two days it won't turn on , the only thing that does turn on is the flash.
I want to know if i should send it to repair or if i should forget it cause it doesn't worth.
Is there any tip?"It is most likely fried. You can exchange it for an out of warranty replacement at an Apple Store."
how does this works ?
Maybe you are looking for
-
First I am new to Flash and have mostly worked in PS. I have created several animated banners in flash. The file sizes are large. I am trying to find a what is the best format and settings to use export these for upload into an website affiliate pr
-
Help! Cannot see User Data...
I have been using Palm Desktop 4.2 for some time on my notebook (Windows XP SP3) for contacts/address book, calendar and memos but a couple of days ago Desktop doesn't see the data anymore. The files are still there in the user name folder and I can
-
Hi All Could you guys help me to solve out this issue will be grateful In my client there are two plants, let us consider plant A & plant B. In both the plant we are running the MRP REGN job weekly with the parameter set-up as followi
-
Im having a little difficulty with PL/SQL in forms its different to the pl/sql for sql*plus. I have an orders form. it has the following fields: Order Id Employee ID Order Quantity Order Date Customer Id Item No Order Price It has a subforms which sh
-
Hi All, We have a couple of variables included in our report: Fiscal Year Posting period We are populating these fields using a customer exit that is based on the current system date and this works well for queries. The problem is that when we use th