Lightroom 2.3 trial version loads pictures in grey in grid display and can"t see the picture
Tried looking for a setting to activate the modules library and develop shows grey boxes and shows the labels of the pictures loaded in raw but not the picture itself. In quick slideshow view, I can see an individual picture. I have attached screen shot. any help will be appreciated.. thanks
See solution here: http://www.adobe.com/go/kb402376
Similar Messages
-
I have a new i phone6 and cant watch the photos i had in my old iphone 4- i can see in the i cloud a line showing last backup of my old i phone 4 but can't see the pictures i have there - tnx for the support
Yes.
Just call your provider and tell them what you want and they will help you get it done properly. -
I just downloaded the itunes 7.0.1 and I can't see the pictures on the itunes store. How can I see them?
I tried reinstalling it but it tells me that a package is missing to install it correctly?
-
I am running vista home premium and I use both internet explorer and firefox. The NYT website photo blog is called LENS and I have always been able to use it. A week or two ago I was told that I needed the latest version of flash drive to view photos. I went to the download site. got the software and loaded it. My list of program now shows Version 10 active x with flash plugins but can't see the photos. Appreciate any help
Hi, Are you using a 64bit Operating System? What version of IE are you using? Did you use the DLM(download manager) when Installing?
Thanks,
eidnolb -
When receiving an email with a picture, I can not see the picture.
I use to receive Email pictures but now the pictures do not open but there is an icon where the picture is suppose to be. clicking on the picture does not open it.
Are these embedded pictures? Maybe remote content is blocked.
http://kb.mozillazine.org/Privacy_basics_-_Thunderbird -
HT201269 How can i see the pictures from the back up in my pc?
I wonder if it is possible to see the pictures from my phone in the computer after I have done the Back up?
No.
you should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
The backup is only used for restoring the info to your iphone. -
I intal maverick in may Macbook pro and now i cant see any pictures on facebook what i can do?
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar.
A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
Open the ''Media'' tab of the "Page Info" window.
Select the first image and scroll down though the list with the Down arrow key.
If an image in the list is grayed and there is a check-mark in the box "''Block Images from...''" then remove that mark to unblock the images from that domain.
See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load -
I can not see the pictures in the photo pane
I'm trying to see my pictures in the photo pane (the media section in iMovie) but I can not see them. I know that I have to have iPhoto 4 or later. I have iPhoto 6 but I can't still see the photos. Can you help me?????
If deleting the pref files didn't help, then it's likely a problem in the iPhoto albumdata.xml file. This is the file that other apps must read to access your library. It usually goes bad due to a problem keyword in your library. Look for non-ascii characters in your keyword list. One user had an empty keyword that caused this problem.
See Dave E.'s instructions on how to read the xml file to locate the problem keyword. If you find one, go into iPhoto's preferences to either edit or delete the problem keyword. http://discussions.apple.com/thread.jspa?messageID=3870956� -
Hello
Today I got my iPhone 4s changed from sprint and when I enter my icloud information it gives me an old backup (196 days old) and I back up automatically all nights , there was no choice to select which one I wanted or anything. So I ended up loosing a lot of important information, all the pictures and everything that I did the past 196 days. I try to see if there is a place on the web that the back up data is displayed but I haven't found anything. I have a lot of important information on icloud, to the extend that I even pay for more space because I use the iPhone as part of my work. Can someone please explain to me what has happen and if there is a way that I can recover my information? I am desperate it is very important. Thank you very much!
FransuasOnce in a while the restore process seems to mess up. What I don't understand is why you would perform a weekly restore.
At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud. Restore a device whenever it no longer works correctly, not just as a matter of maintenance. If it ain't broke, don't fix it. -
I bought an external hard drive from the apple store. I didn't set up time machine I just plugged it in and it seemed good to go. When I go into time capsule should I be able to see my pictures? I would think i could but all I see is a spot for the pictures to be
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
Is it possible to make the pictures in the tools-menu en the words in the menu's bigger the resulotion of my pc is already bigger ase usual,
You can try the comments tools.
-
HT1766 after the restore i can't see the pictures
I manage to restore all the apps i had and all the music but somehow not the picture taken by the phone..
Relly need help!!!
Please advicesIf this regards a restore from iCloud - This is a problem reported by many users: a restore not restoring photos that were in Camera Roll (if the photos you are missing were not on the camera roll, then they are not backed up). Not sure about backups to iTunes.
It's generally advised that for any photos taken on a device, they be synced to a computer for archiving. Never rely on backups alone. Use the USB connection from deviced to mac/pc and store photos in an appropriate place, like iphoto or Aperture (on macs). -
Why is my lock screen blurry? I can't see the picture with ios 7.2
my lock screen is bluury, the picture i set is bluury with 7.0.2
Or try this if the reset doesn't work.
Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I can't see the picture messages I send
Whenever I send a picture message to someone, it appears on my phone as a blank message (the same thing as sending a 'space' to someone). The recipient still receives the message though. Anybody else have this problem and have a possible solution. I've tried turning the phone on and off, turning iMessage on and off, and also I've tried reseting the network settings. Nothing has solved the issue so far.
Hi codys6,
Thanks for visiting Apple Support Communities.
If you are not able to see picture messages you send to contacts, you can find some additional troubleshooting tips that may help in the "To resolve issues with sending and receiving MMS,..." section of this article:
iOS: Troubleshooting Messages - Apple Support
All the best,
Jeremy -
Click on pictures and I only see the picture icon
Once you click on the picture icon and select all, the pics aren't showing only the picture icon. Also, the pictures have quadrupled butonly a few will open. please enligten me
You have an extended desktop. If you move the mouse pointer off the edge of the MBPs screen it will appear on the TV. Likewise you can drag windows from one screen to the other. At present the MBPs screen is the primary display. To make the TV the primary display open System Preferences ➜ Displays ➜ Arrangement. You will see a diagram of two screens with a small bar at the top of the smaller of the two screens. This small bar represent the menu bar on your display. Drag the small bar to the top of the larger of the two screens in the diagram and then the menubar and dock will appear on the TV, making it the primary display and the MBP the secondary display in the extended desktop.
Maybe you are looking for
-
Awkey for awtyp = 'BKPF' and awtyp = 'MKPF' in BKPF table
At my current client, there is the following situation in the BKPF table: When the awtyp is 'BKPF' in the bkpf table, the awkey is number/company/year, as expected. But when the awtyp is 'MKPF' in the bkpf table, the awkey is just number/year, with n
-
Convert the smart from in to zebra programming language?
i have doubt just clarify this, the smart form should be converted in to Zebra programinnig languege how it will do? just give me the explanation? thanQ.
-
JDBC ODBC bridge connections using 2.1.1
Hi, I have reviewed a lot of postings related to JDBC and third party drivers and understand how to connect to the packaged drivers such as MySQL and MS SQL Server/Sybase. Where I'm stuck is the reference in the Connections help to JDBC. We have a OD
-
Do you need help converting videos?
I noticed alot of people are having trouble converting videos on itunes. Itunes does not seem to want to do this and when it does it usally has no sound(or maybe I use windows and itunes dosen't like that. So if a super genuis could post somthing tha
-
Self Registration in Enterprise Portal 7.0
Hi all, I have done the steps for doing Self Registration. I have configured the SMTP Server. Also, the email notification in case of successful Self Registration is enabled. The action UME.Selfregister_User is added with the Everyone role. The SAP A