Lightroom 2 install issue

I am attempting to install Lightroom 2 on a Mac running O/S 10.9.2.  The install takes a fatal error about 3/4 into the process.  Any suggestions?

Hi Denny.
I doubt very much that Lightroom 2 will run (or install) with the version of OSX on your machine.
Adobe would not have upgraded Lightroom 2 to run with your version of OSX.
Get yourself Lightroom 5.4 and install that instead.
Tony Jay

Similar Messages

  • Lightroom CC install issues

    Many issues and the thing is still not installed! Started with the Adobe site being extremely slow, had to use a different PC and browser to make the purchase. The install went OK but was horrendously slow - click on a button/answer and it took 2-3 minutes to continue...??? When opened up LR at the end of the install, start getting the "server busy", cannot complete this action messages. Each time just had to wait a minute or so before I could continue. However LR did not complete the upgrade of the catalog, just hung. I eventually cancelled out and tried again.... same server busy messages. Did a quick search and moved the SL directories - no help. Tried an uninstall and reinstall - same problem - cannot get rid of the "server busy" messages.
    Any kind person have some suggestions?
    Many thanks in advance!
    Yan 

    Hi,
    Please refer to the thread below where similar issue has been discussed:
    Re: creative cloud hangs at 42%
    Regards,
    Sheena

  • Lightroom 6 Install issue: getting a notice saying "OS requirement not met"

    When I try to install my Lightroom 6, I'm getting a message stating "OS requirement not met.  Current OS 10.7.5.  Mac OS 10.8.0 or above required" I'm not sure what "OS" is, or how to increase it..?

    Hi kateg10,
    OS means your operating system. Lightroom 6 requires Mac 10.8 or above to run. You need to upgrade your OS as your machine does not meet the system requirements for installing Lightroom 6. System requirements
    For best assistance, would ask you to contact Apple and check with them, if your machine is up-gradable to the latest version of Mac.
    ~ Arpit

  • Lightroom 5 install issue!

    I just purchased LR-5 and trying to install it however my drive acts as if there is nothing there.  I have tested the drive - it's fine.  I am running Windows 7 and meet all of the specified requirements to run this version of LR - PLEASE HELP!!

    my drive acts as if there is nothing there
    I'm not familiar with this technical description. Could you try describing exactly what steps you are using, and exactly what happens, using different words? With emphasis on the word exactly and further emphasis on the second word exactly. Thanks.

  • I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    Oliver,
    Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
    Here is some help on activation if this is the issue:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Pattie

  • LightRoom CC install exits

    Hi,
    I have Windows 7 32-bit. The LightRoom CC install exits without installing the porduct. After I start the setup.exe, and click yes on UAC, it says "Gathering System Requirements", and then just exits. I turned on Microsoft Installer verbose logging, but the log file is 3.4 MB, and I have no clue what to look for (beyond the obvious).
    I tried several solutions mentioned for LR4, but none of those seem to resolve my issue. I tried right-clicking the MSI file, and either hit repair or uninstall, but it does the same.
    I'm clueless where to go next.

    Hi,
    Please refer to the thread below where similar issue has been discussed:
    Re: creative cloud hangs at 42%
    Regards,
    Sheena

  • Lightroom app installed, but will not open.

    Lightroom app installed, but will not open

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I will be doing a hard install to wipe my imac where I have Lightroom currently installed.  How can I reinstall Lightroom on the new OS without having to purchase it again?

    I will be doing a hard install to wipe my mac. I have Lightroom currently installed.  How can I reinstall Lightroom on the new OS without having to purchase it again?

    As long as you have the serial number you should not have an issue installing and activating Lightroom when you finish the system reinstall.
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules".  I uninstalled, emptied trash and re-installed but I continue to get the same message.

    I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air.  When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules".  Any ideas please?

    A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions.  You might try doing a repair permissions for your user and/or run LR as an administrator user.  I am a PC person so cannot tell you exactly how to do that.
    https://forums.adobe.com/message/1457020

  • SP2010 Foundation Post Install issues on development workstation - Database and Services

    Just recently installed SP2010 Foundation for a development workstation.  Platform isWin7 X64 pro, SQL 2008 (Developer edition)
    (1) Looks like search has some configuration issues.  This is in the Windows event log
    The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition (ID 38eefca2-d092-47f4-a833-23f8280c5f63) threw an exception. More information is included below.
    The device is not ready.  
    (2) In Central Admin > Servers in Farm
    Status - "Upgrade Available", 
    (3) In Central Admin > Manage Database Upgrade Status
    Sveral of the Datbase(s) mention that upgrade is recommended, but one in particular mentions that the DB is too old?
    WSS_Search_GHHTY
    SPSearchDatabase
    Database is too old and upgrade is required
    Huh?  
    (4) Looking at my local SQL 2008 instance that SP2010 created, I see several DB's with "Config" in the name along with a guid on the end of the name.  Is the result of re-running the configuration wizard several times while
    I was correcting install issues?

    here is question, i am assuming its fresh install not upgrade...
    when you run the config wizard( you mentioned many times), which option you select from 2nd try to on ward....cannot disconnect this server from farm?
    are you using any script to install ?
    I would say run the config wizard without disconnecting and this server will host CA option.
    from the central admin > manager server in farm...on top you will see farm version and config database name. note it
    from the Manage database Upgrade status page note all the db names
    now match it on sql and keep those and all other should gone now as a clean process.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

  • Plerase can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    BrightBluephotograph wrote:
    I cannot install lightroom 5 until the upgrades from 4 are on the pc,
    You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5.  Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box.

  • Mac OSX: Flash CS3 Font Install Issues

    Hi,
    I have a Mac Powerbook G4 with OS X installed and Adobe CS3.
    I've installed a font. The font works in Photoshop and Illustrator
    but not in Flash CS3. Why? I've put the font in the Library/Fonts
    folder and the User/Fonts folder and it still doesn't show up in
    Flash. Apparently this is a problem for a number of people see
    another forum here:
    MAC
    OSX: Flash CS3 Font Install Issues Forum
    Please let me know what to do to fix this. I need to be able
    to work with the font in all three applications Flash, Photoshop
    and Illustrator.

    Hi davidd61713525,
    Sorry for not getting back to you sooner.
    Unfortunately, it looks like something is wrong with the file system and the installer can't see the root drive to install to.  A Google search returns numerous results affecting various products and the recurring theme is that something is wrong with the disk.  There are many recommendations from various sources, but nothing definitive.
    Here's a similar thread over on the Apple forums:
    Broken Installer Permissions | Apple Support Communities
    And a similar older one:
    http://forums.macrumors.com/showthread.php?t=1203509
    I would try the following options:
    Try using the PKG installer. This is used Mac SysAdmins to install Flash Player within their organization and uses a slightly different installer path, which may or may not work.
    Some people have had success with disk and permissions repair some have not.  You can try running a disk and permissions repair.  After the disk and permissions repair is complete, reboot the system and try to install again using either the online installer (get.adobe.com/flashplayer) or the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page in the ‘Still having problems’ section.
    If these options do not work, I'd reach out to Apple support to see if they have a suggestion.  If you do find a resolution to this, please let me know.  I'll be happy to share it with people that encounter the problem in the future.
    Maria

  • I recently bought  Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

    I recently bought  Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

    It is possible that you downloaded the Creative Cloud trial of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, this will not interfere with your catalog, preferences and personal files.
    Download the appropriate version from the link below and install, your license key will be accepted and everything will be fine.
    Product updates

  • Re-Installing Issue

    Hi,
    I have a G5 I had to re install and erase my HD cause I had issues, now that i am rebuilding the system it won't let me install FCS, I get to the DVDP disc and it says Installation failed.... I tried it a few time and I get the same error. Can anyone shed some light on this please?
    thanks
    P

    Welcome to the forum!
    Made sure the disks are clean? I'd call Apple on an install issue if it's new or if you suspect a damaged disk and you're the registered user.
    Which OS are your running? QuickTime Version?
    Jerry

Maybe you are looking for