LightRoom 2 will not install on my new Mac OSX 10.8.2
I just bought a new Mac OSX 10.8.2 and trying to install my Lightroom 2 - It keeps saying installation failed...... What Can I do to help this install work?
Correct. AFAIK Lightroom 2 is not compatible with Mac OS 10.8.x. You should upgrade your LR.
Similar Messages
-
The new software lion will not install on my new mac book pro
the new lion software will not install after i downladed it and pressed install it says that the software could not be verified. it may have been corrupted or tampered with during downloading.
You'll have to download it again...
http://osxdaily.com/2011/08/02/re-download-mac-os-x-lion-from-app-store/ -
Firefox 4.0 will not install. I have Mac OSX 10.4.11. Error message 10661.
I tried to install Firefox 4.0 and I got an error message 10661 and it said my system would not support it. I have Mac laptop with MAC OSX 10.4.11. Why won't it install using this operating system?
Firefox 4 doesn't run on a PowerPC Mac.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please
Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
My iomega drive will not open on my new mac mini
my iomega drive will not open on my new mac mini. I was using it on my old mac mini with no problems. Help
What OS was the old Mini?
-
IPhone 3Gs will not sync/charge on my mac OSX 10.4.11
My new iPhone 3Gs will not sync/charge on my mac OSX 10.4.11, but will charge on my friends OSX 10.6.7, what do I do?
Call AppleCare and ask them if they still have an available copy or check on Amazon, eBay, etc. If your computer will support it you will be better off buying a retail copy of Snow Leopard instead.
-
My iphone 4 will not sync with my new macbook air. It says that syncing refused to start. Any suggestions? FYI - all my apps and software are updated.
Thanks,
JodiClose iTunes. On your phone, double tap the Home button to bring up the multi-tasking bar, tap & hold any app until they all start to wiggle & a red minus sign appears. Tap the red minus sign to remove every app shown. Tap Home button when finished. Re-start your Mac, launch iTunes, connect your phone. See if things work now.
-
The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.
-
I tried to install Photoshop CS2 on Mac, OSX, 10.9.5.
By the end of the installation, it shows, error, but no error number for reference,
The only choice is "quit".
Please helpThat is correct Das_Sad. CS2 will not run on Intel based processors under Mac OS. You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.
-
Photoshop CS4 will not open after upgrading to Mac OSX Yosemite
I recently upgraded to Mac OSX Yosemite and unfortunately, my Photoshop CS4 will not open. The message says it requires Java SE6. I now have Java 7 update 71. I would appreciate suggestions from anyone who can help to resolve this problem. Thank you.
Thank you very much, Chris Cox. I followed the link in the error message to Apple's support page, downloaded and installed the Java for Mac OSX.
I can now open my PS CS4 again. What a relief!
Many thanks for your fast response and accurate advice.
Cheers! -
I have tried to complete updates and install software and for some reason it will not update or install new software such as a printer. What could be the problem
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
Mac OS X will not install as it states Mac HD is used for Time Machine backups?
I'm not sure what is happening?! I wanted to connect my new wireless trackpad but could not as my mac said I needed 10.6 or later. I checked my mac which I thought had snow leopard on but it states it has 10.5.8? I am now trying to re-load mac OS X from my disc as it states it is 10.6 but it will not load as the installer gets to a point where it states that the Macintosh HD is used for Time Machine backups and consequently will not move on to the next stag? Now I cannot even get out of installing or eject the disc! Can anyone help with what I am doing wrong? VMT
The installer won't load on any HD that contains a Backups.backupdb (used for Time Machine/Backup) folder on it. If the backup isn't in use, delete that folder and 10.6 will install.
Regards,
Captfred -
Mavericks will not install on brand new Hard Drive
Trying to install Mavericks to a brand new internal 2TB Samsung SATA 3.0 HD on a 3-yr old 12 Core Mac Pro system that was running Mnt Lion just fine. After multiple failures upgrading the Mnt Lion disk to Mavericks. Decided to just use a brand spankin' new hard drive and do a clean install of Mavericks. Now during the install to the NEW DRIVE, getting error message "Mavericks cannot be installed." Then I reboot and try to force the continuation of the install, doing this repeatedly, and I sometimes get a error log instead of a just an error message. Error log says: Thread 34 Crashed:: Dispatch queue: com.apple.root.high-priority. Then the 1st line listed under that is: 0 libsystem_platform.dylib 0x000000010fa5a06a _platform_memmove$VARIANT$Nehalem + 138. If anybody knows what any of that means?
Thanks.Without the full listing of the trace I can't be sure, however it would look more like a bonafide logic board or memory error rather than the HD that's causing the problem. The low level drivers on Mavericks have obviously changed (otherwise it wouldn't be a different OS version) and possibly they're exposing a lack of performance in your memory. The actual Mavericks install may not be the problem, but rather being corrupted during installation. In the line you quoted, Nehalem is the Intel name for your CPU, the memmove operation failed (move blocks of memory contents from point A to point B) and they shared library containing this was in the system library....sort of critical stuff.
You could try the following:
Re-seat the RAM and try again.
Try an old OS installation and see if it succeeds (Snow Leopard, Lion, Mountain Lion, etc)
Try an install to an external enclosure
If re-seating the RAM does the trick, then you're set.
If it doesn't, then install an older OS to see if they work OK. If older OSes work OK using the internal drive and you have after market memory in the system, it would imply to me that the memory probably isn't quite up to snuff and Mavericks is exposing it. If it's original memory then it should be OK.
If the older OSes now don't install correctly and it's giving similar problems try doing the install in an external enclosure. The point here being to try to move your data path off the internal SATA cable. If these install OK, try it with Mavericks. If any of these work it could be the SATA cable or I/O controllers on the logic board (SATA cable most likely). A good reference for these sorts of problems is:
Bad Hard Drive Signs and Symptoms
Possibly a last option, which I would think (or hope) would be rare, would be that the binary for Mavericks install got corrupt during download. You could also try some of the resets they have in the linked document above. They might work and it doesn't take any effort.
Good Luck -
I have recently purchased Microsoft office for mac. I have installed it on my imac with no problems. However it will not in stall on my mini mac. The system requirements state mac OS X version 10.5.8 which is what my mini mac is. When I insert the disk the page displays says Intel based macintosh needed any suggestions ?
Sounds like you've got a PowerPC G4 mini? i.e. NOT an Intel mini? What does it say after "Processor:" in "About this Mac"?
-
My i-phone will not sync with my new mac
I just tried to sync my I phone 4 with my new mac. Previously was syncing with windows. The first time was able to remove a few apps but since that time it goes through the motions of syncing but does not make any of the changes to apps music etc. Any suggestions
I would head to the iPhone forums, they'll be able to diagnose your issue better. My guess is that since it's doing a first synch, it's taking a long time, and you're not waiting for it to finish. But the iPhone people will give you a better answer.
Maybe you are looking for
-
Message: You can't open the application Firefox because it may be damaged or incomplete
I've been using Firefox for a long time. Today I decided to change the settings to delete my history when I closed the window. Now when I try to open up Firefox I get a continuous pinwheel. I deleted Firefox from my computer and reinstalled, but it s
-
I don't know what other info you need as that explains what happens
-
I was wondering if you can change a setting to when you send an email with a blank subject it will not pop up a message telling you that your subject is blank.
-
I'm trying to do the simplest thing. Having a text in button subpicture highlight, so that once the button is highlighted a text appears below. Ok, it work, but the text is really ugly. Read on the forum that it's because of the lack of anti-alias an
-
Preview Display doesn't show - why?
It must be something simple - but I can't get it - why the Preview Display is black? Scopes show color data all right but no Preview ( Still Store is the same - scopes juxtapose, Preview stays black. Why is this so?