Lightroom 3.3 and Photoshop CS4

I have noticed that on my Mac that I see a slight color shift now that I have transformed images from NEF files to DNG files in Lightroom 3.3. When managing a photofile, in Lightroom then editing further in Photoshop CS4 and then sending to print (Epson 3880) I see some change in color from the Color preview to the final print. Any suggestions? Prior to adding Lightroom 3.3 to my workflow this was not an issue.

PS CS 4 uses an earlier version of ACR to render files than is used by LR (no process 2010, no lens profiles, none of the new noise reduction). You can open the RAW files into PS CS 4 using ACR in the usual way, rather than using LR, as long as the RAW file is recognised by the version of ACR you have. The advantage you have by opening and rendering using LR 3 is that the process 2010 is now available as the file is rendered by LR. If you want to use files rendered as process 2010 directly in ACR you will have to upgrade to CS 5.
Either way you loose nothing my rendering in LR, irrespective of which version of PS you use. The only difference between rendering to CS 4 from CS 5 is that the new file issaved immediately rather than on save. CS 5 allows you to not save and have no new file. You always require a rendered file for use in PS as it does not directly edit RAW formats.

Similar Messages

I'm running Lightroom 2.7 and Photoshop CS4 and can't open or import NEF files from a Nikon D600

Need help understanding why the NEF files created by my D700 work fine in both Lightroom 2.7 and Photoshop CS4, but the same file format created by a Nikon D600 keep getting a unkown error when I try to import or open them.

You can either upgrade Lightroom or use Adobe's Free DNG Converter to make a backwards-compatible file for LR 2.x to read. New camera support is only effected on current versions of LR and Adobe Camera Raw and your version(s) do not support the D600.

Keywording problem in Lightroom 2.4 and Photoshop CS4

I'm experiencing a problem with keywording in Lightroom 2.4 and Photoshop CS4. When i export a batch of photos that were keyworded in LR to the desk top then open a photo in PS I find only one keyword when I look through the "file info" menu item. Any ideas on how I might resolve this problem or what I may be doing wrong.
Many thanks in advance.

Make sure that you have the keywords setup so that they will export. You can check by right clicking on a keyword in the Keyword List panel and choosing Edit Keyword Tag. The dialog shown below should open and should see a checkmark against Include on Export and Export Containing Keywords. It's fairly easy to get this wrong when working with hierarchical keywords.
Also, you can configure the Keywording panel so that it shows which keywords will be assigned when image is exported.

Lightroom 3.6 to photoshop CS4

I used to use Lightroom 2, a Canon 450D and Photoshop CS4. i had no problem using Lightroom, Photo/Edit in Photoshop to open and work with my images in photoshop. i then upgraded to Lightroom 3.6 and now use a Canon 60D camera and still use Photoshop CS4. When i click Photo/Edit in Photoshop now, Phoshop CS4 opens but the image doesn't appear. What can i do to rectify this?

OK things have change here. I expect you are working with raw files from your camera.
With LR 2 and PSCS4 the ACR version are in sync i.e. LR uses the equivalent of ACR 5.x and PSCS4 uses ACR 5.x.
Now LR 3.6 has the equivalent of ACR 6.6 and PSCS4 is using ACR 5.x. Since the ACR versions are not in sync you should get a warning dialog indicating that the ACR version needs to be updated in PSCS4 but this is not possible. If you are not seeing a warning dialog you need to do the following in Lightroom 3.6 go to Edit>Preferences>General Tab> click on "Reset all warning Dialogs". You should now see a warning dialog when you select Edit in PSCS4. You should choose "edit a copy with Lightroom adjustments". This will make Lightroom create a tiff file with your adjustments and send this to CS4. ACR in PSCS4 cannot process the LR 3.6 develop settings.

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Thank you so much. You are absolutely right. I will have to reduce the screen density when I work with those programs.
Thanks for your trouble and regards
Quentin Sussman
<mailto:[email protected]> [email protected]
Cell: 082 4900 124
Home: 011 883 2582
Fax: 086 680 7981

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

1. You have allowed Apple to auto-upgrade your Mac
Turn off auto-update here:
Menu > Apple > System Preferences > App Store
2. The Icons on your dock are Aliases not real apps
They point to where the apps really are which is:
For Pages 5.2.2 in your Applications folder
For Pages '09 in your Applications/iWork folder
3. You are alternately opening documents randomly with either version of Pages
Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
right click on the file and choose which version you want to open it
4. Pages '09 can not open Pages 5 files
Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
It will also auto save opened files into its own format.
You can export these back to Pages '09 if you need to:
Menu > File > Export > Pages '09
5. Yes Pages 5.2.2 is a marked downgrade
Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
For further information about what has happened:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
Peter

Lightroom 4.3 and Photoshop CS5 Crashing

For several months, I have been trying to troubleshoot random blue-screen crashes when (and only when) using Lightroom 4.3 and Photoshop CS5 in Windows 7 64-bit. The Windows stop error code is always 124 (hardware related). The crash dump files have not provided much help. They just keep referring to "ntoskrnl.exe" and "hal.dll" as possible causes, but that doesn't help isolate specific hardware. Without going into all the excrutiating details of what I have done to try to find a hardware problem, I am now 99% sure that hardware is NOT causing the crashes. I recently ran "Who Crashed, Professional Edition 4.01" to analyze the crash dump files. It identified "cameraraw.dll" and "tliadjust50.dll" (a file installed byTopaz Labs plug-ins Adjust 4, DeNoise 5, and Fusion Express 2) as possible causes of the crashes. I would like to refresh "cameraraw.dll" to determine if it is in fact causing the problem. My question is how to replace my existing "cameraraw.dll" file with a new one. Can I just download a new "cameraraw.dll" file (from where?) and replace my existing "cameraraw.dll"? Or, do I have to reinstall LR4 and/or CS5 to refresh "cameraraw.dll"? I really hope I don't have to do that, because I think I would probably have to also reinstall all the third-party plug-ins and extensions I have installed to work with LR4 and CS5, and that would be a major pain. Does anyone have any suggestions/

in each, click help>deactivate.
then uninstall each.
then install each on your new computer and activate using your serial number.

Posterization in Lightroom 4.4 and Photoshop CS6

I'm struggling with posterization in Lightroom 4.4 and Photoshop CS6. I'm shooting RAW on a Nikon D800. Unedited bright sunset photos show nasty posterization. Screenshot is included, unedited. Any suggestions on what to do about this?

EmilyM wrote:
2.twenty_one, here's a screen shot of the highlight clipping. Pulling the exposure way way down gets rid of the posterizing in the clouds and mist, but remains on the blown out highlights. Do you think if an image were exposed without highlight clipping, we would not see posterizing in any of the rest of the image?
It would be difficult to take this picture without blowing out the brightest areas. The Highlights slider is what you want to use to recover the blown posterized areas. Feel free to set it to -100 if necessary. You may also need to reduce the Whites slider, which sets the Highlight clipping point. Looking at the LR default settings Histogram the Black level is very high, which may be due to lens flare. Either way using a lower in-camera exposure setting would help to retain highlight detail.

Will Adobe inDesign CS4 and Photoshop CS4 run on Yosemite?

Will Adobe inDesign CS4 and Photoshop CS4 run on Yosemite?

Roaring Apps web site.
http://roaringapps.com/apps?index=a
InDesign has Issues.
Photoshop appears to be OK but a re-installation may be necessary. Run the CS Cleaner Tools below and PS uninstaller before attempting to re-install PS CS4.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.

Lightroom 4.3 and Photoshop CS5

I have Lightroom 4.3 and Photoshop CS5 and want to remove both programs off the old computer and put them onto the new one is there a simple process please?

in each, click help>deactivate.
then uninstall each.
then install each on your new computer and activate using your serial number.

I had lightroom 4 and Photoshop CS4 I downloaded cc and trialled it and then uninstalled since then I cannot read/open my Canon cr2 files and

I trialled cc Photoshop.
I had Photoshop CS4
and lightroom 4.4.
I used LR4 and cc as well as CS4 during that time
BUT
when I uninstalled cc
after initial work in LR4
I try to open it in PS4
it no longer recognise my Cr2 (Canon Mark 111 tif files)
(which it had no problem with previously.
When I try to go from LR$ to PSCS4
it now tell me
this version of Lightroom may require the Photoshop Camera Raw plug-in version 7.4 for full compatibility.
Please update the Camera Raw plug in using the update tool in the Photoshop help menu.
Ihave downloaded this off the net but it does not seem to solve the issue
HELP!!!

G'day Curt,
I smacked myself on the forehead when I read your reply. How could I have forgotten to do that? However, after trying that, the problem persists and more files are corrupting. I now have around ten files of around 200 in a party folder I have that have corrupted. They all were perfect several days ago.
I'm starting to get worried as I work for the local rag and have social pics this weekend to process. I can't afford to let this happen to them.
Thanks for the suggestion....
Onslow

Lens Correction in Lightroom 3 and Photoshop CS4

I just upgraded to Lightroom 3 and make use of the lens correction feature in the develop module. After doing all my
adjustments in develop I click ctrl-E to take the photo into Photoshop so I can tweak Levels. I noticed that the lens correction adjustments do not seem to be recognized by CS4 when the photo opens up.
Do I have to upgrade to CS5 to get the lens correction adjustments in LR3 recognized or am I doing something wrong. Thanks

I am using Lightroom 3.4, x64, and Photoshop CS5 (12.0.3 x64) on Win 7 OS.
I might add that, based upon my situation, limited knowledge & experience, I have a number of images ( aprox 200), taken with the same camera/lens combination, for which I want to take advantage of what seem to me the most useful features of each software package: in this case, the ability of Lightroom to apply common "development", first in lens correction and, later at the end, miscellaneous common settings; but, in the middle rotation & crop unique to each image.
Am I missing something, for I would think my situation not uncommon?

Dowloaded Lightroom 3. Now Photoshop CS4 will not open??

Please help. Can anyone explain why my photoshop program will not open.. I use Photoshop Bridge then double click on an image and Photoshop opens.
After I downloaded Lightroom 3 which I purchased through an on-line re-seller, I selected some images and imported them into Lightroom.
I do not understand why Photoshop CS4 does not open.
can anyone advise me.

What kind of files anyway?
What is the format’s »File Type Association« (check under Adobe Bridge CS4 > Prefernces)?

Canon Pixma Pro 9000 printer will not print for Lightroom 2.3 or Photoshop CS4

When I hit the print button on either Lightroom or Photoshop CS4 to print using the "front tray", the printer sends a message to lower the tray for the back tray. The Canon tech rep stated that when I hit the Print button on Lightroom or Photoshop there should be "drop down window" which allows me to choose the "front tray". Until I do this, the printer assumes that I am still using the back tray. My question - why doesn't my Lightroom or Photoshop programs display this "drop down window" when I press the "print" button?? Please!! Can anyone help me??

After so many attempts, I don't remember what the display was when I first requested for help. I just trying everything that I
could think of.
I don't think that I downloaded the right Driver the first time. As a last resort, I downloaded the Driver again from Canon and to my surprise, another menu appeared. It was different from the previous ones and rather confusing. The Canon tech had described what I should bd looking for and so I proceeded ahead one drop menu after another and finally the right menu appeared giving me the choice between the automatic back tray and the front tray. After I clicked on the front tray, everything worked fine.
Thanks, Was DYP, for taking time to attempt to help me. It's my opinion that Canon's documentation was not complete and therefore created some confusion.

Adobe CMM and Photoshop CS4 File Info problems

I installed the Adobe Color Management Module several days ago.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3618
Today when I opened the File Info dialog in Photoshop CS4,I got a blank black window. Same went for the Kuler window and other extensions under the Window menu. Other panels such as the palettes and toolbox were fine.
I went through reset prefs,reinstalled PS,and reinstalled my video driver.
Same problems.
Uninstalled the Adobe CMM and the panels returned to normal.
I don't know exactly what happened,but something this forum should know about.

Chris,I downloaded and reinstalled the CMM and the problem repeated.
File Info: blank, as well as the Kuler, and Connect extensions under the Windows menu. Additionally,any custom panels installed via Configurator also went blank.(although I had uninstalled those on my first round of troubleshooting)
Again as soon as I uninstalled the CMM,I got the File Info, Kuler, and Connect windows back.
This is on a Toshiba A205-S5843 running Vista SP1
I also tried the CMM on a Toshiba A75 (Windows XP)with a trial of CS4 Extended. There were no problems on that configuration with the CMM installed.
I don't know what it is,but thought it should be passed along.

Lightroom 3.3 and Photoshop CS4

Similar Messages

Maybe you are looking for