Lightroom 3.3 having problems keeping pan position when printing

Has anyone else run into the problem when printing from LR 3.3 that was fixed in LR 3.2. - namely
Print: Image loses “pan” position when placed in cells that are not big enough
When LR 3.0 was out they released 3.2 and fixed the above problem. Recently when printing from 3.3 I noticed that it could not retain any image pan whilst in cells on the sheet that are not big enough. It does not matter whether or not there is one image of multiple, it seems to suffer from the same problems, with all images defaulting to the right hand margins.
I can confirm that 3.2 did indeed fix the issue, but it seems to be back in 3.3
Can anyone else confirm this issue?
MacBook - 4GB Ram - 100Gb free space - OS X 10.6.5
Epson R2400 printer + Latest Epson Print Drivers
Canon CR2 images from 1Ds3

HI Jim...sorry about the delay in replying, have been away....what you suggested didn't work i'm afraid, but thanks for trying...earthpilgrim

Similar Messages

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?

I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?
ITUNES show keep show there is no sim card installed in the iphone you are attempting to activate.....how?

rajafromcalifornia wrote:
how can i get rid of this error There is no sim card installed in the phone u are attempting to activate please disconnect and a sim card in the phone please help me and my iphone cannot go to menu display can u help me please
You cannot active a phone if it does not have a SIM card in it. Period. End of discussion.
If you get this error and it has a SIM card in the phone then either the SIM card is defective or the phone is defective. Get a new SIM card and try again. If the problem occurs with the new SIM card the phone needs to be repaired.

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

Adobe Reader Order Number: AD011597276. I am having problem installing the CreatePDF Desktop Printer

Adobe Reader Order Number: AD011597276. I am having problem installing the CreatePDF Desktop Printer.

The CreatePDF Desktop Printer has been retired. Please see https://forums.adobe.com/docs/DOC-5131 for more information.

I am having problem with my iphone6 when editing photos in facebook it is turning into black

i am having problem witth my iphone6.when i am trying to edit a photo in facebook messenger it is turning

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Having problems with texts width when viewed in Firefox

I My site is OK when viewed in Chrome and Safari, but in Firefox, the width of paragraphs is becoming very long and all is displayed wrong.
I need a clue where to look to fix. I have not , or very little knowledge of HTML code. So I rely on the DW CS5 interface.
Thanks,D.

Thanks Nancy ,
I'll try,
Should I just paste your info between the brackets, I guess.
I am not so good with this but I need to spent a bit of time to fix this
old web site while another one is being designed.
Yes the images are too big, I'll reduce them, and optimize. This was
done in a rush..
D.
Le 14-02-23 18:07, Nancy O. a écrit :
>
Re: Having problems with texts width when viewed in Firefox
created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in
/Dreamweaver support forum/ - View the full discussion
<http://forums.adobe.com/message/6149874#6149874

HT4623 I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

Did you change any AppleID accounts or anything? I've seen this happen when changing accounts or certain restore situations.
If you are using iCloud you should be able to reset your phone to Factory Defaults and restore from iCloud, but it always makes me nervous.

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

Problems with color matching when printing...

Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your time

I've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.

I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnafing glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnifying glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

This only happens when I'm in my browser. Ex. when I'm on a site and I decide I like what I see and want to print it text that is, my printer always prints tiny. When I'm in Microsoft Word for ex. I print it and it looks like what I expect. So I don't know if somehow my printer got set to print tiny when on the web. If you can help me I would be most appreciative. Thanks again for your response.

I am having problems with my itunes, when plugging my iphone or ipod to the laptop - i can see iphone/ipod in the top right corner of itunes but when i click this to the see what is on theis iphone/ipod the option is no longer there, this was working

I am having problems with the new itunes set up ........
when i plug in my iphone or ipod touch it shows in the top right hand corner of itunes
BUT when i click on the shown iphone/ipod the icon its no longer there, i was useing this fine yesterday and it was showing yesterday what is on this ipod and would allow me to add/remove music, but now this option is no longer availlable - i have added a couple of albums to my itunes i can listen to the music from the laptop but cannot sync the ipods to trancefer these albums to the handheld devices -
i have been trying to sort this all day with no luck not sure if there is a problems with itunes or is it something i am doing ????
HELP !!!!!!!!!!!!

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Keep layout position when using Find/Change?

When using Find/Change in InDesign CS4, each occurrence of the "Found" material is centered in the window, so the page moves around with each find. Is there a way to keep the page in a fixed position when searching through a document?

Actually, I can think of a shortcut for the hard part: The user uses the
regular find/change UI to make all their settings. Then, they run the
script, which will simply use the settings in the UI. Nice, huh! So you
could get a listBox of all the finds -- select the entry and you get
taken to the desired location. Click the "change" button and the change
is made. Here's a proof of concept:
#targetengine engine20
var myFinds = app.findText();
var w = new Window("palette");
var myList = w.add("listbox", undefined, myFinds);
var changeButton = w.add("button", undefined, "Change");
myList.onChange = gotoFound;
changeButton.onClick = makeTheChange;
w.show();
function gotoFound(){
app.select(myFinds[myList.selection.index].parentTextFrames[0].parent.parent);
app.select(myFinds[myList.selection.index]);
function makeTheChange(){
myFinds[myList.selection.index].changeText();
Obviously very rudimentary: but this does work in CS4. If the list is
too long, though, the change button will disappear off the bottom of the
screen. Also, really once the change is made, the item should be removed
from the list, but there's a bug in CS4 that makes it impossible to do
that simply, if I recall correctly (or was that only a tree list?)
Also, I have found that the only sure way of getting the entire spread
to show is as I've done it above (and it would need much more error
checking than this -- for instance, overset text).
Ariel

I have an IPod touch 4 gen. And I'm having problems with the audio when I use other than Apple brand earphones

I have an Ipod Touch 4 gen. and I'm having problems with audio when I use other than Apple brand earphones. I'm talking about music only so far, when I use apple earphones all is fine, but if I use other type of phones ( sony for exemple ) I can only hear the music and the background but not the lead singer voice, can anybody explain this to me? thank you.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
- If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Lightroom 3.3 having problems keeping pan position when printing

Similar Messages

Maybe you are looking for