Lightroom 3 does not start after hard drive replacement
I have just recently replaced the hard drive on my IMac. All files and applications have been re-installed from the time machine back up drive. LR shows up on the dock but when I open it it comes up with:
"The Lightroom catalog named “Lightroom 3 Catalog” cannot be opened because another application already has it opened" and "Quit the other copy of Lightroom before trying to launch."
Do I have to reinstall LR3 from the LR DVD? I do not want to use loose the catalog structure and edit info.
Any advise?
Thanks in advance.
Look in the folder that contains your catalog and see if there is a .lock file present. If so, delete it and try again.
Similar Messages
-
Lightroom does not detect external hard drive
I am a newcomer to Lightroom and I'm trying to move my photos (25,000+) from my laptop to external hard drive. I've already copied the catalog over there (following online video tutorial by David Marx). I thought the way to move the actual photos was to drag and drop them using the left panel within Lightroom. But no matter what I do, Lightroom does not show my external hd (LaCie), so I can't drag/drop. Am I right that this is the way to do it?
Strangely, Lightroom does "see" the LaCie when I open the "Import" function.
Thanks for any help.
DylanIs your LaCie formatted? Do you see it in your OS?
--Yes.
If yes, try the following:
In your OS move one folder to your LaCie.
Open LR. In the folders panel there should be a question mark besides the folder you just moved - at the old location!
Right-click this folder and point LR to the new location on the LaCie.
--So far, so good. But now LR sees LaCie as a folder, not a drive. And none of the folders that are already on the LaCie are visible.
If Lr lets you do this you're fine and from then on you can use the drag-and-drop method within LR.
Or, alternatively you can move all the other folders in your OS and then point LR to the new location. It might be a bit faster to make the move in your OS.
--I'm holding off on this step for now... -
Spotlight not indexing after hard drive replaced
Hi all
Just wondering if anyone knows how to encourage Spotlight to re-index? Just had my hard drive replaced as part of the recall, and now Spotlight wont index anything.
I've tried previous suggestions (adding and removing hard drive to privacy list, commands through terminal etc), but it's still not working. All the software is up to date (10.7.5).
Any ideas? It's incredibly annoying, and making working on this computer virtually impossible at the moment.
CheersIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "mdworker" (without the quotes) in the Filter text field. Post the most recent 50 or so messages that appear in the Console window — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.
Step 2
Do the same with the search string "mds". -
Serial Number does not work after hard drive was replaced
My hard drive was replaced and now FCP 7 does not work even when I type in the correct serial number. Help please. Thanks
You posted your question in the Final Cut Pro X forum.
You should repost it in the Final Cut Studio forum. -
Recovery Media not Working after Hard Drive Replacement
I have replaced the hard drive in my dad's Sat C655-S5225. When I run the recovery disk I get an 03-FFFF-0000 error. Please help!
The error seems to be a hardware check failure. I don't really understand why Toshiba ever added this check, as it has been problematic for awhile now. The two most common reasons are updating the bios and replacing the hard drive. The only work around I have seen, is to obtain a Windows Media from a third party and manually install your drivers. Message me if you need to obtain a Windows installation media, Make sure you have a product key, I won't need this and you shouldn't share it with anyone.
-
Recovery Disc Not Working After Hard Drive Replacement
Machine Info:
HP Pavilion DV7-1245dx
Part #NB231UA#ABA
OS - Windows Vista - 64 bits
AMD Processor
Replaced crashed hard drive with 1TB WD internal blue notebook HD. System diagnostics says drive tests ok. I have both recovery discs (part 1 & 2). Recovery disc just runs in DVD/CD drive. I get to "System Recovery Options" screen, but none of restore or recovery manager options execute. I can see directories and files on recovery disc. But no autorun of recovery process and can't execute any of the files. Any assistance appreciated.First thought- maybe your laptop doesn't support 1TB hdd.Second thought- this is probably an 'Advanced Format' hdd, tripping up Recovery Manager. (Is the hdd recognized in BIOS?)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Time Machine does not start after external hard drive is connected
Time Machine does not start after external hard drive is connected
These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine. -
My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.
Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
Help my computer does not recognise my hard drive
Hi All,
Yesterday I turned my computer on to find that it would not start up. I tried following advice etc about starting up in safe mode etc but no help what I have found is that he computer does not recognise the hard drive anymore so when I out the osx install disk in and run system profiler and disk utility it does not show a hard drive. I have not done anything for this to happen. Can anyone help me with this.
Thanks.
PaulInstead of using older OS X CD/DVD install to a new drive.
Where is your backup and clone?
Buy some drives! that is a must.
Pick up a FW case, you will need it to put the old drive in, and later, so you have an external and off line drive for backups and maintenance.
A copy of TechTool Pro 4/5 and Disk Warrior (DW first).
SuperDuper to clone your drives.
Demo of Prosoft Data Rescue 3 to scan the drive once you have a system and you put the 'dead' drive in FW case.
Then do backups and preventative maintenance on a very regular basis and have at least two backup sets.
If you have been doing that, and know and have read those instructions in the past.... -
Windows XP re-installation does not recognize any hard drive - help
Hi,
I have X60s Model: 17044JU
I have original XP installed.
My computer is very slow and I am trying to reinstall XP from my CD (and format HD so I clean everything).
When Windows installations blue screen shows up and loads drivers etc then it tells me that it does not recognize any hard drive.
I thought I may need SCSI or RAID drivers but since I don't have floppy I can not load them.
Any help how to install new XP would be appreciated.
Thank you
Miron
Moderator edit: Masked serial number to prevent mis-use.
Solved!
Go to Solution.Hi
I changed BIOS setup from AHCI to Compatibility and indeed it worked.
However there is easier way to reload new system on thinkpad.
I didn't know that but you can press ThinkVantage button when you start your laptop and IBM utilities start up.
Then there is an option to reload the system to be in original state as shipped from the factory. It loads or drivers and initial programs. It also formats your hard drive.
I found it pretty convenient.
Thanks for help.
mc -
My hard drive crashed and I lost everything on my Mac desk top, including my Adobe Lightroom. I had my hard drive replaced but how do I download to my new hard drive? I have my previous serial number but when I entered that, it said it was invalid.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Contact Adobe Support by chat for serial number issues:
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Game does not start after installing on mac pro
Game does not start after new install on mac pro ?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
My iPhone4 does not start after it was out of charge and recharged again?
My iPhone 4 does not start after it was out of charge and recharged again?
Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy
Maybe you are looking for
-
After installing OS X Server Bonjour printer doesn't show up
I just recently installed OS X Server 4.0.3. Before I installed it I could see the printer as a Bonjour printer from the Mac Pro and the 4 other Macs on the network. After installing OS X Server on the Mac Pro it cannot see the Bonjour printer. Al
-
Bluethoot headset and pulseaudio
Hi all, I installed bluez + blueman and when I connect my BT headset, it is shown up in the pulseaudio input/output list; but if it goes out of range of the laptop (or if I explicitely disconnect it using the icon in the notification area), when I tr
-
Where does Photoshop save files?
I have Photoshop CS6 and I saved a copy of a file I edited. Unfortunately, I thought it would save in the same folder it was in previously. It saved it in a folder called fMroKMw4STeoEwnMnJeX6A. I can't find any folder with that name on my IMac.
-
Equium A60 won't boot up at all
My Equium laptop A60 asked me to uninstall Norton Antivirus because of as problem with it. On the restart, the computer would not boot up at all. I am using Windows XP and no BIOS is available when I turn the computer on and the computer just has a b
-
Help modifying example that sets screen resolution programmatically
Hello, I'm wondering if anyone could help modify the following example: http://www.ni.com/example/27650/en/. Currently, it sets different screen parameters (ie: resolution, pixel depth and refresh rate) for a default screen. I'd like to use it with t