Lightroom 3 - not inserting history steps bug(?)

Sometimes I'll do a series of edits quickly and LR3 will make them but not show them in the history panel. I've grabbed screenshots here of one case, where I imported a photo, rotated it slightly and bossted exposure. Both edits were made as you can easily see in the image, but the rotation wasn't recorded in history.
I use an autohotkey script to give keyboard shortcuts for some things that don't have a built in shortcut so I can make some edits very fast, maybe the history panel isn't keeping up with the edits properly?

Thanks! Can't believe I didn't check that in the first place. Turns out my K20D's raw files are a few pixels off being exactly 3:2 (4672x3704, which works out as 3.01:2 )

Similar Messages

Step progression not inserting row in Jobdata panel

I am trying to research step progression in Peoplesoft 9 & did all the setup.I can see the employee in review wage progression page with Approved status.As the final step, i ran HR_WP_ADV App Engine. .But is not inserting row into jobdata & giving error "Cannot Job data CI for employee 'emplid' ".
Any help please!!
Thanks

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

Lightroom does not launch with insertion of memory card.

Lightroom does not launch on my PC with insertion of memory card. Option checked to launch in preferences. Autoplay settings set for Lightroom 6 (I assume this is CC) to import photos with insertion of memory card. New since installation of CC.

I had this problem and I was able to fix it by editing the Windows registry (it was only a minor edit).
I changed the value of the following registry key:
HKEY_CLASSES_ROOT\Adobe.AdobeLightroom64\shell\open\command
The value was:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7\Lightroom.exe "%L"
I changed it to:
C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe "%L"

Lightroom 5 changes crop history

so I keep having a problem where I crop inlightroom, get a photo all set, move on to the next one and then come back and it automatically reverts back to the crop before the final, so I have to go back one stop in the history to where I actually left. I am not sure why it is automatically undoing my final crop but is SOO annoying! Anyone have a clue how to stop it?

Chas Clark wrote:
Also, in Lightroom 5, when I go back using 'History' and find a version I like; how do I lock that in. That is how do I ignore/delete the most recent changes I no longer want?
You can go to the history step you want and make a small change like +1 clarity and then -1 clarity and it will get rid if the history steps above these steps.
Another way is to use ROB COLE's "Clear Top" Preset.
Create an empty preset called "Clear Top" by going into develop and hitting the + button in presets and when the dialog opens clear ALL the checkboxes, name it Clear Top, and then hit Create.   Find the" Clear Top.lrtemplate" file and open it in a text editor and change it to look as follows.
s = {
          id = "1111111111111",
          internalName = "Clear Top",
          title = "Clear Top",
          type = "Develop",
          value = {
                    settings = {
                              NoEdit = true,
                    uuid = "1111111111",
          version = 0,
The id and uuid will be different so leave them alone.   I you created a truly EMPTY preset, the only thing you will have to add is the
NoEdit = true          line.
save the edits to the same file name and reload lightroom.   Make sure ONLY the above code is in the listing although with different id and uuid numbers so you won't be applying other settings.
From now on, you can just hit the "Clear Top" preset and it will clear all history steps above the one you have chosen. This is my most used preset!!!!    Thanks to ROB COLE for this idea.

Upgrading to Adobe Lightroom 4 in 7 simple steps.

The following steps can be used to upgrade Lightroom 1, Lightroom 2 or Lightroom 3, as well as Lightroom 4 Beta catalogs.
Step 1. Download and Install Lightroom 4
Step 2. On your Mac’s finder, find the location of your Lightroom 3 catalog. It should look something like name.lrcat
Step 3. Right click on that file and select “open with Adobe Photoshop Lightroom 4″
Step 4. You should see the “Lightroom Catalog Upgrade” dialog. Be very careful with this step. Catalog names can NOT be changed later. I strongly suggest you click on “change” and determine the best location and name for your upgraded catalog.
—Click to continue
As you can see I created a new FOLDER (EAP_LR4_Laptop) and a new CATALOG name EAP_LR4_Laptop.
You might be wondering why I picked this naming structure. Simple:
EAP stands for Eduardo Angel Photography
LR4 is obviously Lightroom 4
And Laptop is the location of the Catalog, the place where all my Lightroom settings (keywords, presets, previews, plug-ins, etc) will be stored. This is especially important if you often shoot on location and need to sync temporary catalogs to your permanent catalog. See our previous post with step-by-step instructions on how to do this.
Step 5. Ready? Jump! Hit “Create” and then “Upgrade”
Keep in mind that Lightroom will create a NEW catalog inside the new folder we just created. The old previews will me moved to the new location but the old Lightroom 3 Catalog will still exist in your system. I recommend keeping this file for a couple of weeks until you have confirmed that all the images and settings were upgraded correctly.
Time for a quick coffee break. Depending on your system specs, how many images you have, the file sizes, presets etc, the upgrade can take several minutes. I have over 50,000 RAW files and 600 presets, and the upgrade took less than 4 minutes.
Step 6. We are almost there. You now see the “Enable reverse geocoding” dialog, which is basically asking for permision to access Google Maps. Even though I am NOT happy with Google’s recent privacy policy changes, I recommend enabling this feature so you can use the brand new Map Module.
If later on you regret feeding Big Brother more information, you can disable this feature under the “Metadata” tab of the “Catalog Settings” Dialog.
Step 7. Done! We have successfully upgraded our Lightroom 3 catalog into a brand new Lightroom 4 catalog.
One last thing to consider: Any new changes done in Lightroom 4 will not be available in previous versions of Lightroom. What this means is, if you are in the middle of a project, finish it in Lightroom 3 and then do the upgrade. Now is time to play.

It might be fair to warn all users for the time being that most likely they will be bitten by 2 bugs:
If you used tone curve adjustments in LR3-develop:
They will be lost, as LR4 currently does not read this record from LR3-catalog, but replace it with a default, same as if in a new import.
If you have a folder structure with more than ca. 3000 images within one folder, you will not get them displayed.
So good advice: start LR4 with new imports only, and wait for LR3-catalog conversion until these bugs will have been fixed.
Unless none of the two prerequisites for problems apply to you.
Cornelia

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

How do I tell the CC application manager that Lightroom is not installed on my pc?

Before i got CC i was using Lightroom 5 swedish version for evaluation. I used application manager to install an English version by setting the language to English but language after CC installation of Lightroom is still Swedish. Checking the language settings again after installation it was set to English. Now I uninstalled Lightroom using control panel to remove it completely and my intention was to reinstall it from CC. However, the application manager still claims that Lightroom is installed. How do I get the CC application manager to understand that lightroom is not installed and when I do reinstall it it should be in English?
Win 7 Home Premium 64-bit PC, CC Version 1.0.2.189

Hi adogool,
Please try to perform the steps given in the follwoing article.
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

Lightroom does not recognize the raw format of files loading from my Nikon AW1 and loads them as jpegs. I know there are updates that would allow this camera to be recognized as shooting raw but I haven't been able to work it out. Any help out there?

Lightroom does not recognize the raw files (necs?) coming in from my Nikon AW1. It loads them as jpegs. I know it is possible to update Lightroom so it knows my Nikon but I can't get it to work.
I would like files to be loaded as .dng.

update by downloading the files directly and then applying them for lr 4 and earlier, http://www.adobe.com/downloads/updates/
for lr 5.7.1, the last lr 5 update, use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

After updating to new 2014 updates Lightroom would not go from 'library' to Develop - screen was greyed out with the message saying:- Please renew your membership to reinstate the develop module. My membership is up to date. I then uninstalls Lightroom an

After updating from CC to new 2014 updates Lightroom would not go from 'Library' to 'Develop' - develop screen was greyed out showing the message 'Develop module is disabled. Please renew your membership to reactivate the Develop module.' Since my membership is fully up to date. I then uninstalled Lightroom 5 and then installed it again. Now when I try to open Lightroom 5 its LOGO flashes onto the screen and then 'crashes' in an instant. Please fix.

Hi brooks45,
Please try the steps mentioned in the KB Doc : http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
Regards,
Rave

Popup not INSERTing into table and not refreshing called page ...

Greetings
Environment: APEX 3.1.1.00.09 on AIX 5.3 in 10gR2
I have read many of the threads concerning my issue and I feel I am getting close to the answer but somehow have combined too many of the suggestions and am tripping over my own code.
Please look at my sample application on apex.oracle.com:
Workspace: galway
User: gwicke
Password: gwicke
Please start with Page3, select any Agency and then click 'Add New Contract'.
There is currently a <strong>BOLD </strong>label 'Add New Builder' that is a link that should open a popup window. Type any name into the field and click 'Create Builder'. This should INSERT the row into the builder table, close the popup, assign the new builder name to the calling page item 'Builder Name' and populate the screen item.
In it's current state, the application will open the popup window, allow entry and close upon clicking the 'Create Builder' button. However the new builder is NOT inserted into the table and the calling page item is not populated.
By looking at the Page Items and Session State I can see the correct values assigned to the 'Pn_BULDER_NAME' items on both the popup page (4) and the calling page (2) but the value does not appear on the screen.
I've read where there's really two parallel universes, no sorry, two versions of the screen items, one in Session State and one that is displayed in the browser and there are steps to take to be sure the one displayed is updated from Session State as I would like in this case.
I've entered Javascript code in the Page4 - header to define the 'passBack2()' function and code in the 'Optional URL Redirect' section of the 'Add Builder' button to hopefully execute the ARP for the INSERT, assign the Page2 items and close the popup. It doesn't quite get all that done.
Any helpp is greatly appreciated. Thanks to Denes for most of the code suggestions I've followed.
-gary

Hi Gary,
I think that there's a very simple solution to this - didn't really spot it last night.
Firstly, yes, you could use a "button" to handle the call for the popup - just make sure that the button is a URL type "button" that is actually an A tag with the call in the URL target setting. Alternatively, you could take you existing A tag and use the same class attribute for one of your buttons as this should make it look like a button.
More importantly, though, I think that we could do it as:
1 - On your page 2 popup call, clear that cache for page 4 (the popup page) - I have already done this in your app by updating the url
2 - On the popup page, allow the user to enter in their desired P4_BUILDER_NAME value (not sure if you want to do something to make this unique?)
3 - Let the user click the Create button on the popup. This will submit the page, which will get your P4_BUILDER_RANK (the pk) value and insert a new record into the table (you could consider creating a sequence and a trigger to handle the creation of a new PK value?).
4 - Assuming the P4_BUILDER_RANK then exists (it wouldn't if there was an error somewhere), then conditionally display a region that had a piece of javascript that submits page 2 and then closes itself - we don't need to pass anything back to page 2 (see below)
5 - As the P4_BUILDER_NAME and P4_BUILDER_RANK exist in the session, when page 2 is being reloaded, (A) the select list would be updated with the new Builder (still not sure why all my entries appeared at the bottom instead of in alpha order??) and (B) both P2_BUILDER_NAME and P2_BUILDER_RANK can have Post Calculation Computations set (NVL(:P4_BUILDER_NAME,:P2_BUILDER_NAME) and NVL(:P4_BUILDER_RANK, :P2_BUILDER_RANK) respectively) - the effect of this is, if there are values stored in the P4 page items, we use them, otherwise we use whatever values were in the P2 page items
6 - Finally, to stop (5) happening in all page 2 loads, you would need to clear the cache for page 4 in as many places as possible - eg, branches to page 2 or buttons on page 2
The reason we can't pass values back to page 2 is that one of the items is a select list. The value we want to select won't appear on the select list until the page has been submitted. So, we can't set the value and submit because the value isn't there. We can't submit and set the value because javascript wouldn't know when the page has been updated (or, at least, you would have to put some independant mechanism in place to identify this, which may become complicated).
So, simply put, as long as we know that if the values are in the session, we can use Post Calculation Computations to set our fields to these values. The only thing to bear in mind is that we need to ensure that these session values only exist when we need them - hence clearing the cache. This principle should work for any type of field - but, as you have no doubt seen, simple text fields can be updated by the popup directly as the field should accept any value we give it.
My only other recommendation would be to completely remove the MRU processes from the page as these are not required (they just confuse the issue) and you could make your PK fetch and record insert into a single process - just to keep things neat and tidy, you understand!
When I finished with your app last night, I did leave it so that javascript would create a new option on the select list and then set the value. But the above methodology seems to be a lot simpler.
Andy

File to RFC problem- data is not inserting into ztable in R3 system

Hi
i have done File to RFC scenario which picks data from flat file and inserts into ztable via RFC in R3. but while testing my scenario everything is successful in XI monitoring (Successful flag in MONI and RWB) and in auditlog message status is DLVD.
it seems to be everything successful in XI and RFC call also successful in R3 system.
but for some reason data is not inserting into table (RFC is used to insert data into ztable)
Is there any way to debug RFC call excecution in XI..?
RFC code is like this:
insert ZMM_AUTO_GR from INPUT_TABLE.
commit work.
END FUNCTION.
please advice what could be the reason not inserting into table.
Help would be appreciated.
Regards,
Rajesh

Hi Praveen,
please see audit log- from communication channel monitoring..
Receiver channel 'CC_INCA_RFC_SAPECC_Receiver' for party '', service 'R3DCLNT210' (internal name 'RfcClient[CC_INCA_RFC_SAPECC_Receiver]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Current pool size: 1, maximum pool size : 1
Channel History
- OK: 2008-07-28 04:32:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 04:31:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:56:56 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:49:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:48:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA

Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

Can we insert main step in between the existing main steps in GAF apps?

Hi,
I just wondered when I have to place an all new view between the steps already existing in the GAF Application,
and I was unable to find any button for insert new step or copy a step or to move a step.
I have 5 steps in GAF App and wanted to add 6th step in between existing 4th and 5th step. But every time the new
step gets added in the last, and I think I could not find any way to move this new step prior to old one.
It will be tedious for creating the old step again with all the setting of toolbar and other setting if I delete the previos step.
Isn't there any solution?

Hi,
Please go through the below doc
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507b2811-652a-2f10-be94-96b4bf3863e9?QuickLink=index&…
and follow the same procedure using button 'Add Substep'.
BR,
RAM.

I have a full Creative Cloud Subscription, but I only use Photoshop and Bridge. I want to change to a less expensive subscription but it is not clear what steps I need to do to make this happen. Do you have a simple step by step guide? Seems that there is

I have a full Creative Cloud Subscription, but I only use Photoshop and Bridge. I want to change to a less expensive subscription but it is not clear what steps I need to do to make this happen. Do you have a simple step by step guide? Seems that there is lots of help to upgrade but not down grade.

FIRST check with Adobe to find out if you may cancel what you have without a fee
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Then cancel what you have
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
And finally buy a new subscription
Cloud Plans https://creative.adobe.com/plans
-Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
-Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)

Trial version of lightroom 6, not the cloud version?

Can I Download a trial version of lightroom 6, not the cloud version?

Thomas,
You can purchase LR6 at the link Kglad gave above. If you want to try LR6 first, you can install the Lightroom CC 2015 trial and then serialize it if you want to purchase the non CC version later. Please see these links for instructions:
Creative Cloud product trial | Download, install, start trial -Step-by-step instructions for downloading and installing trial versions of Adobe Creative Cloud apps.
Serialize Lightroom CC trial to activate as Lightroom 6
Pattie

Lightroom 3 - not inserting history steps bug(?)

Similar Messages

Maybe you are looking for