Lightroom 3 starting problem

my laptop has window 7 64bit, i have already loaded photoshop cs5, it works fine,
when i bought and installed a Lightroom 3 to my laptop, it just don't work, everytime when I tried to open the program, window would state that
"Adobe Photoshop Lightroom 64 bit has stop working
A problem cause the program to stop working correctly
window will close the program and notify you if solution is available"
and it has been 2 weeks now, after several install and uninstall, it still don't work, anyone has run into the same problem before? is this a problem of the setup for my own computer? how can I find out the solution for that?

Geoff,
I believe I have isolated the cluprit. It is a USB Contoller.
If I enable this controller Lightroom will lockup on Import. Disable and the Import function works perfectly.
I plugged in a Dynex UDMA (Multi-Card) Dungle Reader to a USB port with the controller disabled and the Import from this external device works correctly too. Windows throws a generic popup import/view question but the "File" icons are no longer there, just the generic Windows Image icon. So I assume this controller also controls a portion the generic Windows Import Function. (Note: The windows import may be causing part of this, I may also check turning off auto detect)
Possible Conflict Controller
Go To
-->Device Manager
------>Universal Serial Bus Controllers
---------->USB Mass Storage Device (Right Click and Disable)
Controller Details/Properties
General
USB Mass Storage Device
Device Type: Universal Serial Bus controllers
Manufacturer: Compatible USB storage device
Location: 0000.001d.0000.001.007.000.000.000.000
Driver
USB Mass Storage Device
Driver Provider: Microsoft
Driver Date: 6/21/2006
Driver Version: 6.1.7600.16385
Digital Signer: Microsoft Windows
Driver Details
Windows\system32\drivers\USBSTOR.SYS
I wanted to get this posted before I started messing with finding an updated controller. I will keep you posted if an updated controller or work-around are found.

Similar Messages

Please help with strange monitor/Lightroom 4 interaction problem

I bought a Dell Ultrasharp U3011 yesterday, and I'm now facing a very strange problem. It's sort of related to the common discussed issue of Lightroom's color management, but there is a twist here. I'll explain.
The monitor I had been using (and still have) was a Samsung SyncMaster 244T. I had no problems at all with it.
With the U3011, I've run into this problem:
-When I view files in Lightroom 4, the colors are muted and contrast low. The same files seen in Xnview, ACDSee Pro (with the color management turned off), Digital Photo Professional (colorspace set to sRGB), are much more vivid. In Photoshop, if I use the default color setting, it looks muted like Lightroom (I'm guessing because Adobe products have default color profile set to ProPhoto RGB), but if I set the color profile to the monitor's profile, it becomes vivid and matches the other software I mentioned. If I use any other profile such as sRGB IEC81966-2.1, ProPhoto RGB, Adobe RGB, etc, it doesn't match the other software I mentioned. This is strange because the other ones match each other because they are set to sRGB, but in Photoshop, even if I set the color profile to sRGB, it still doesn't match.
-In Lightroom 4, even if I use Soft Proofing, nothing changes. It's as if Soft Proofing is broken--it doesn't do anything, no matter what color profile I choose.
-Now, here's the twist. I didn't have any of these problems when I use the 244T. This leads me to assume that the problem is how the U3011 is interacting with Lightroom. I did a quick comparison of opening up the same image on both monitors in ACDSee Pro, and they looked identical. (At this point, I had the U3011's preset set to sRGB. This is the only preset that makes the U3011 look identical to the 244T).
Next, I did an experiment, and I was very surprised by what happened. This is what I did:
With both monitors as a dual display setup, I turned on Before/After comparison in Lightroom (made sure both version had the same setting and look identical by copying the After's setting to Before). I then moved Lightroom's window so that one photo is seen on the U3011, and the other shows up on the 244T. And OMIGOD, they looked different! Why is this happening? I've already established that the same image looks identical on both monitors when viewed with ACDSee Pro, but in Lightroom, they looked different on each monitor.
And then things got even more weird. When I dragged the Lightroom window fully to one monitor or the other, Lightroom actually started changing the colors right before my eyes as it responded to which monitor was displaying which photo! Lightroom was somehow interacting with the monitor in real-time. So if the Before looked muted on U3011 and the After looked vivid on the 244T, when I drag the whole window into 244T, the muted Before will stay muted for about a second or so, and then it'll suddenly change and become identical to After. And when I did the reverse (drag the window into U3011), the reverse also happened--the vivid After will stay vivid on U3011 for about a second or so, and then it would suddenly change and become muted. Lightroom was identifying each monitor's color profile setting and changing the images according to which monitor was doing the displaying, and when the images were split between the two monitors, Lightroom was slitting them into two different settings to match whichever monitor is displaying which side.
So what the hell does that all mean, and what can I do to get Lightroom to display the photos so that they look the same as on all the other software I mentioned (so I don't have to play the guessing game of editing the images, export them out to other software to check how they turned out). Also, remember that I didn't have this problem with the 244T--Lightroom displayed the photos the same way as the other software I mentioned. The problem right now is that the U3011 is somehow causing Lightroom to display the photos differently, and no color profile presets in the OSD control can make them match.
I need to solve this problem, or else my last resort would be to return the U3011 and try another brand/model and see if that helps.
Any ideas?

Yes, that's basically sensible advice you got there (but I was more succinct ).
An important point that was mentioned over there is that you must not confuse document/source profile with monitor profile. They are both links in the color management chain, but they serve different purposes. The document profile defines the colors in a standard color space. The monitor profile describes the monitor's own native color space - its response to the RGB numbers it's fed. So one is translated into the other, by the application on the fly, through a normal profile conversion, and that way the colors appear on-screen as intended.
If those two profiles/color spaces are roughly similar, as they would be in the case of an sRGB document displayed on a standard gamut display - then you can get by without color management. It won't look too far off. But a wide gamut monitor changes the rules, because its native color space is not similar to sRGB, it's much closer to Adobe RGB.
Anyway, this is what color management is about. Any profile can be translated into any other. So in this context it doesn't really matter what color space the document is in - as long as you have a good monitor profile it will display correctly (within practical limitations). Lightroom is a sort of special case because its internal working color space is not one of the standard ones, instead it's a modified ProPhoto space with linear gamma. But the basic principle is exactly the same: source profile > monitor profile.
Just to go a little more in-depth while I'm at it: When you calibrate a display you actually do two separate things. You first calibrate it to a more or less standardized response. But that's just a linear one-dimensional correction. It does nothing about how color is actually reproduced, how red is red for instance. The calibration is global and affects everything system-wide because it's read into the video card or monitor hardware.
Then, once calibrated, a monitor profile is made. This is a full, complete and accurate description of the monitor's behavior, in three-dimensional color space. The precision level is much higher. This profile is used, by color managed applications like Lightroom and Photoshop, to display the image.
Other applications that are not color managed will simply ignore this profile, and send the RGB numbers straight through to the display, unmodified. With a standard gamut monitor (and an sRGB document) the difference won't be too dramatic and you may not notice it unless you look closely. But a wide gamut monitor will make the difference jump out immediately.

Lightroom 4 color problem

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develope setting is set to "none" , the box is unchecked "apply auto tone adjustments". I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. What could the issue be?

monitor NEC 2690 wuxi
eye-one display 2
Original message
From: twenty_one
To: [email protected]
Received: 2/10/2013 12:30:42 PM
Subject: lightroom 4 color problem
Re: lightroom 4 color problem
created by twenty_one in Photoshop Lightroom - View the full discussion
Yes, that certainly looks like a problem with the Lightroom rendering. Skin tones and red in general is clearly off, while Windows Photo Viewer looks good.
I'm almost certain this is a problem with the monitor profile. As troubleshooting, try to set sRGB as monitor profile (or Adobe RGB if your monitor is wide gamut), and see if the difference persists. But try to recalibrate first.
What calibrator and what monitor?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5062403#5062403
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5062403#5062403
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5062403#5062403. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

The temporary file path is not valid. Lightroom cannot start

Windows XP, SP3, Lightroom 2.5.
External hard drive starts acting funny. Round here we expect hard drive failure, so I order a new drive and when it arrives copy the backup onto the new drive. The new drive has the same drive letter as the old one, but not the same name. When I try to open a catalog I get: "The temporary file path is not valid. Lightroom cannot start." The catalogs seem to be fine, as when I open lightroom directly, not by clicking the .lrcat file, catalogs look normal. If I copy the lrcat file to my internal hard drive it opens. If I create a new catalog on the external drive I get the same problem.
I have tried deleting the preferences file. I have tried deleteing and reinstalling lightroom. I have used the external HD on another computer with lightroom and it opens normally.
All I can imagine is that there is some setting, somewhere in the registry which does not get erased when the lightroom gets re-installed. Any guesses?
I am at a loss! Please hope me!

Could be your Windows tempfile path is messed up. You could try going to Control Panel/Advanced and pushing the Environment Variables button.See what the TEMP and TMP variables are set to.
Under "User Variables", both of mine are set to C:\Documents and Settings\<my name>\Local Settings\Temp.
Under "System Variables", both are set to C:\Windows\Temp.
Make sure that the directories referred to are legal and on accessible drives. Make sure they aren't read-only. It wouldn't hurt to create them if they don't exist.
It's worth a try, I think.
Hal

I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create

I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create files in the temporary file location /var/folders/jv/2bct456j0yg4ys681fxk9zq00000gn/T " don't know what has happended in 24 hrs except I did check my permissions on my main directory to ensure that I had extended permissions to all the folders contained within my main drive on my IMac running OSX 10.10

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Lightroom CC starts once, but fails on second time

After resolving the "Start" problem fixed by "Log off/Log in" in Create Cloud, I finally be able to try Lightroom CC.
But when I quit Lightroom, and restart it a second time, it crashes :
If a remove the "catalog" on file system, ligtroom starts again once.
But when I quit, same issue again.
Any ideas ?

No, the catalog is on my main drive.
By removing the catalog on file system, I've deleted the catalog directory directly from the Finder app.
By doing that, Lightroom does not find the previous catalog, and so ask me to choose or create another one.

Lightroom Preview Cache Problem

I am running Windows 8.1. When I start Lightroom 5.3, I get a dialog saying "Lightroom encountered a problem reading from it's preview cache and needs to quit." Tried reinstalling. Can't get past this.

Agree about deleting previews. This doesn't cause any problems. If Lightroom can't find a preview when it wants one, it simply recreates it. The only penalty is that accessing images in Library Module may be a bit slower for a while.

Where can I get serial number for Lightroom to start using it?

Hello. I have just created Adobe CC account and purchased a Photography membership plan for Individuals. The price is 9,99 per month and this sum has already been taken from my card. On this page (https://accounts.adobe.com/plans) I can see the confirmation that I have obtained this plan.
Now I want to use Lightroom but it asks me for serial number. After reading some help I found that I should get serial number from here - https://www.adobe.com/account.html. But on this page it says that "You have no registered products.". So I see no serial number.
So there's a simple question - where can I get serial number for Lightroom to start using it?

Jeff, thanks for your answer but it doesn't help. I've successfully passed all checks on page Sign in, activation, or connection errors | CS5.5 and later . My internet connection is ok, hosts file ok, certificates ok, etc. It's not a source of the problem.
I've found that on page Adobe ID it says that I have free membership. Somehow it turns that my purchased Photography membership plan is not there at all. in order to proof that I really purchased it please see screen from my internet-banking page below:
Why it is displayed only free membership in my account page and not Photography subscription which was already paid?

Lightroom 5.3 problems, downloading through Creative Cloud.

Lightroom 5.3 problems, downloading through Creative Cloud. Error 1624
ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid.
MSI Error message:
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624

this is from emma at https://blogs.adobe.com/lightroomjournal/2013/12/lightroom-5-3-now-available.html
I had this same error and managed to get around it by running the .msi file that the CC app downloaded to a temp folder on my own. Steps were:
1. Find the location Adobe_Lightroom_X64.msi (in a a temp folder)
2. Run it and install (serial number was already pre-filled out)
3. Restart the CC desktop app
It then appeared as installed under ‘Your Apps’ and works as usual.

"Lightroom has encountered problems reading this photo."

***** UPDATE July 17, 2013 @ 9:16 am Central Time (UTC -06:00)*****
After Creating a fresh catalog I have been able to clarify the issue a bit. This error appears to only show up in Folders exported as Catalogs. Particularly when I try and open that exported catalog.
I suspect there is a problem with the way Lightroom 5 is exporting these catalogs. I didn't have this issue with LR4.4, but it shows up any time I export a folder as a catalog within LR5, regardless of whether or not it is exported from an upgraded catalog or a fressly created catalog.
It looks like fixing the problem is going to be time consuming, but not impossible. So far I have confirmed that these files - reported as throwing this error by Lightroom 5 ("Lightroom has encountered problems reading this photo .... You will not be able to make adjustment to this photo.") - can be imported into a new/existing catalog by multiple methods without carrying over the errors displayed in the exported catalog.
This is frustrating and adds additional steps to my workflow, but isn't undoable. Of course it would be nice if LR5 worked as correctly and exported folders as catalogs without throwing errors when those new catalogs were opened...
Is anyone else seeing this problem when they open catalogs created by "exporting a folder as a catalog"?
***** Original Post *****
I'm really confused. I am consistently getting this message on certain exports, but not others...
When it happens:
1) "Export this Folder as a Catalog" from a specific folder within my Working Catalog
Select the location
Select "Export negative files"
When I open the NEW Catalog - ALL the photos reflect this error message: "Lightroom has encountered problems reading this photo .... You will not be able to make adjustment to this photo."
When I go to the Develop tab it displays "There was an error working with the photo" over the photo, but I can edit it... When I close the catalog and re-open it, the changes don't reflect UNTIL I go back to the Develop tab, then the thumbnail will reflect the change. But the system still insists that it has a problem with the file...
2) The same thing happens when I export the file from my Working Catalog as an image of the same format - be it tif, dng, or psd, or RAW files. Not sure what I was refering to here (can't duplicate today - July 17).
When it doesn't happen:
When I export the file to the auto import folder for my Portfolio catalog (original format). This seems to work...
Why am I so confused? Because all of these catalogs are located on the same drive (which is different than the drive my Working Catalog is on). When they are auto imported to my Portfolio catalog they seem to work, but everything else throws an error sinse I upgraded to LR5!
My System:
Windows 7 Pro SP1 (fully up to date) 64-bit
Intel Core i7 CPU 950 @ 3.07GHz
Installed RAM: 12.0 GB
My Lightroom 5 Working Catalog doesn't seem to be having any problems...
This problem is frustrating enough that I may go back to LR4. I can't have my archived files compromised...

Suggestion to all who encounter problems like this: if you've installed 3rd party memory cards (ram), go back to your original ram, or at least the brand of ram that your computuer came with.
Long story, short:
I had the same error message in LR5. It only happened with several images in a given import. If I deleted all of the images from the import and reimported the images, a different set of images would have the error message. The images that originally had the message would no longer have the problem. I deleted and reimported several times while observing the same behavior.
Not only did lightroom give me issues, but Bridge had problems reading the files, and the previews of the problem images would not show up in Finder (Mac speak). This ruled out, to me at least, that it was a software issue. I went out and purchased a new card reader and had the same problems. I tried a different card with different images and got the same problems.
After I contacted Adobe, they had me upload two files with the error, and they said the files were corrupted due to faulty hardware. I took my mac book pro (13in early 2011 w/ 10.7.5) to the apple store and they ran a diagnostic test amoung other test and we came up with nothing. Everything seemed to be good on the hardware side. After some research the Rep. asked me about my ram (memory cards). I had in the past installed two 3rd party cards to boost my ram from 4GB to 8GB. The rep. suggested that I go home and test the issue with the original ram my computer came with before we go any farther. So far, I haven't had any issues.
I hope this helps,
Josef

Photoshop7 start problem

On my Windows Vista PC I run several Adobe programs: the CS3 suite, Illustrator9, Reader9, but also Photoshop7 and ImageReady7. Two days ago suddenly all Adobe programs refused to start, including the Reader . Apparently, there was a problem with the licences. I have downloaded the LicenceRecovery program from Adobe Support, and having run it, as expected, all programs did run again.......except for one: Photoshop7. Every time when I start the program, it begins loading all the necessary modules, but then a Windows error message appears, saying that the program stopped running, that there is a problem (?) and that I have to close the program.
I've tried several times to de-install and re-install Photoshop7 and ImageReady7 (they both came on the same disc). Every time Set-up congratulates me that I have succesfully installed the programs, while in fact the start problem persists. ImageReady starts, Photoshop does'nt. As Photoshop7 is now an oudated program, Adobe's helpdesk refuses me to help . I suspect that something in the Windows Registry has been corrupted (by LicenceRecovery?), but I have no idea where to look for. Has anyone encountered this problem before, and If so what was the solution?

Google is your friend.
https://discussions.apple.com/thread/1197195?start=0&tstart=0
Photoshop 7 no longer works in Leopard OSX 10.5
Photoshop 7 was released in March 2002, it is now 10 years old.
Sorry for your problems, but you have only 2 possible solutions:
Roll back the OS to an earlier version
Upgrade to a newer version of Photoshop (to save some money you could just get Photoshop Elements instead)
You might want to download a trial version to Photoshop Elements to see if it does what you need before spending any money.
Good Luck

CRS on Redhat 5 auto-start problem

Dear all
Recently I tried to install Oracle 10gR2 on Redhat 5. I did research and took all the necessary actions to install it on Redhat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD was in unknown format. When I stop the nodeapps and start it again, everything stars working. It seems that the problem is something to do with boot process. I tried to put some delay ( for OCR mount ) but still no luck. This is the result from crsd.log from node1 when node2 is down.. :
2009-06-24 22:00:07.461: [ default][3594852768]0CRS Daemon Starting
2009-06-24 22:00:07.461: [ CRSMAIN][3594852768]0Checking the OCR device
2009-06-24 22:00:07.464: [ CRSMAIN][3594852768]0Connecting to the CSS Daemon
2009-06-24 22:00:07.838: [ COMMCRS][1103116608]clsc_connect: (0x151f20d0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:07.838: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:07.838: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:09.307: [ COMMCRS][1103116608]clsc_connect: (0x151f23b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:09.307: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:09.307: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:10.773: [ COMMCRS][1103116608]clsc_connect: (0x151f25c0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:10.773: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:10.774: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:12.150: [ COMMCRS][1103116608]clsc_connect: (0x151f2880) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:12.150: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:12.150: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:19.093: [    CRSD][3594852768]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2009-06-24 22:00:19.093: [    CRSD][3594852768]0Active Version and Software Version are same
2009-06-24 22:00:19.093: [ CRSMAIN][3594852768]0Initializing OCR
2009-06-24 22:00:19.098: [ OCRRAW][3594852768]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.128: [ OCRMAS][1228994880]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number = 1
2009-06-24 22:00:19.129: [ OCRRAW][1228994880]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: allcomp 0
2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: default 0
2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMCRS 0
2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMNS 0
2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSUI 0
2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSCOMM 0
2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSRTI 0
2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSMAIN 0
2009-06-24 22:00:19.149: [ OCRSRV][1249974592]th_select_handler: Failed to retrieve procctx from ht. constr = [363817168] retval lht [-27] Signal CV.
2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSPLACE 0
2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSAPP 0
2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSRES 0
2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSOCR 0
2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSTIMER 0
2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSEVT 0
2009-06-24 22:00:19.152: [    CRSD][3594852768]0ENV Logging level for Module: CRSD 0
2009-06-24 22:00:19.153: [    CRSD][3594852768]0ENV Logging level for Module: CLUCLS 0
2009-06-24 22:00:19.154: [    CRSD][3594852768]0ENV Logging level for Module: OCRRAW 0
2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: OCROSD 0
2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: CSSCLNT 0
2009-06-24 22:00:19.156: [    CRSD][3594852768]0ENV Logging level for Module: OCRAPI 0
2009-06-24 22:00:19.157: [    CRSD][3594852768]0ENV Logging level for Module: OCRUTL 0
2009-06-24 22:00:19.158: [    CRSD][3594852768]0ENV Logging level for Module: OCRMSG 0
2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCLI 0
2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCAC 0
2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRSRV 0
2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRMAS 0
2009-06-24 22:00:19.161: [ CRSMAIN][3594852768]0Filename is /u01/app/crs/crs/init/rac1dr.pid
[ clsdmt][1417812288]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1drDBG_CRSD))
2009-06-24 22:00:19.506: [ CRSMAIN][3594852768]0Using Authorizer location: /u01/app/crs/crs/auth/
2009-06-24 22:00:19.760: [ CRSMAIN][3594852768]0Initializing RTI
2009-06-24 22:00:19.761: [CRSTIMER][1438792000]0Timer Thread Starting.
2009-06-24 22:00:19.770: [ CRSRES][3594852768]0Parameter SECURITY = 1, running in USER Mode
2009-06-24 22:00:19.770: [ CRSMAIN][3594852768]0Initializing EVMMgr
2009-06-24 22:00:19.996: [ COMMCRS][1449281856]clsc_connect: (0x15b1dc20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2009-06-24 22:00:21.860: [ CRSMAIN][3594852768]0CRSD locked during state recovery, please wait.
2009-06-24 22:00:22.494: [ CRSMAIN][3594852768]0CRSD recovered, unlocked.
2009-06-24 22:00:22.496: [ CRSMAIN][3594852768]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2009-06-24 22:00:22.604: [ CRSMAIN][3594852768]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac1dr-priv)(PORT=49896))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0Starting Threads
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0CRS Daemon Started.
2009-06-24 22:00:23.732: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:23.821: [ CRSRES][1554180416]0Attempting to start `ora.rac2dr.vip` on member `rac1dr`
2009-06-24 22:00:23.822: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:23.935: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.vip` on member `rac1dr`
2009-06-24 22:00:30.657: [ CRSRES][1554180416]0Start of `ora.rac2dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:30.705: [ CRSRES][1543690560]0Start of `ora.rac1dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:31.408: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:31.410: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:31.647: [ CRSRES][1554180416]0Attempting to start `ora.rac1dr.gsd` on member `rac1dr`
2009-06-24 22:00:31.708: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.ons` on member `rac1dr`
2009-06-24 22:00:32.538: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.538: [ CRSAPP][1554180416]0StartResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.573: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.573: [ CRSAPP][1543690560]0StartResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.737: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.737: [ CRSAPP][1554180416]0StopResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.837: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.837: [ CRSAPP][1543690560]0StopResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.873: [ CRSRES][1554180416][ALERT]0`ora.rac1dr.gsd` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0Human intervention required to resume its availability.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.921: [ CRSRES][1543690560][ALERT]0`ora.rac1dr.ons` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0Human intervention required to resume its availability.
Any help is highly appreciated.
Kamy

CRS on RHEL 5.5 auto-start problem
hi all
Recently I install RAC Oracle 10gR2 on Red hat RHEL 5.5. “Two node cluster, iscsi storage, ocfs2 mounted files & ASM ”
I did research and took all the necessary actions to install it on Red hat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD ,ASM and the other services was in unknown state. When I stop the CRS & start it –all again, everything stars working. Please friends I need to fix this problem because the cluster services and the client workstation are stopping when the servicers is relocated to node 1 after the server reboot because the CRS did not worked still on node and manual starting is taking time.
This is the result from crsd.log from node1 when node is online .
Name Type Target State Host
ora....SM1.asm      application ONLINE UNKNOWN linux1
ora....X1.lsnr      application ONLINE UNKNOWN linux1
ora.linux1.gsd     application ONLINE UNKNOWN linux1
ora.linux1.ons      application ONLINE UNKNOWN linux1
ora.linux1.vip     application ONLINE ONLINE linux1
ora....SM2.asm     application ONLINE ONLINE linux2
ora....X2.lsnr      application ONLINE ONLINE linux2
ora.linux2.gsd      application ONLINE ONLINE linux2
ora.linux2.ons     application ONLINE ONLINE linux2
ora.linux2.vip      application ONLINE ONLINE linux2
ora.mutdb.db      application ONLINE ONLINE linux2
ora....b1.inst      application ONLINE OFFLINE
ora....b2.inst      application ONLINE ONLINE linux2
ora...._taf.cs      application ONLINE ONLINE linux2
ora....db1.srv      application ONLINE UNKNOWN linux1
ora....db2.srv      application ONLINE ONLINE linux2
############################### CRS Log ON Node 1 ##################################
2010-05-27 11:54:57.357: [ default][3741415840][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2010-05-27 11:54:57.366: [ default][3741415840]0CRS Daemon Starting
2010-05-27 11:54:57.366: [ CRSMAIN][3741415840]0Checking the OCR device
2010-05-27 11:54:57.379: [ CRSMAIN][3741415840]0Connecting to the CSS Daemon
2010-05-27 11:54:57.783: [ COMMCRS][1107867968]clsc_connect: (0x8481ce0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:57.783: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:57.783: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:54:59.182: [ COMMCRS][1107867968]clsc_connect: (0x8481f60) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:59.182: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:59.182: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:00.569: [ COMMCRS][1107867968]clsc_connect: (0x84821f0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:00.569: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:00.569: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:01.954: [ COMMCRS][1107867968]clsc_connect: (0x84824b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:01.954: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:01.954: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:05.924: [    CRSD][3741415840]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2010-05-27 11:55:05.924: [    CRSD][3741415840]0Active Version and Software Version are same
2010-05-27 11:55:05.924: [ CRSMAIN][3741415840]0Initializing OCR
2010-05-27 11:55:05.937: [ OCRRAW][3741415840]proprioo: for disk 0 (/u02/OCR_1.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.938: [ OCRRAW][3741415840]proprioo: for disk 1 (/u03/OCR_2.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.981: [    CRSD][3741415840]0ENV Logging level for Module: allcomp 0
2010-05-27 11:55:05.983: [    CRSD][3741415840]0ENV Logging level for Module: default 0
2010-05-27 11:55:05.994: [    CRSD][3741415840]0ENV Logging level for Module: COMMCRS 0
2010-05-27 11:55:05.996: [    CRSD][3741415840]0ENV Logging level for Module: COMMNS 0
2010-05-27 11:55:05.999: [    CRSD][3741415840]0ENV Logging level for Module: CRSUI 0
2010-05-27 11:55:06.001: [    CRSD][3741415840]0ENV Logging level for Module: CRSCOMM 0
2010-05-27 11:55:06.003: [    CRSD][3741415840]0ENV Logging level for Module: CRSRTI 0
2010-05-27 11:55:06.006: [    CRSD][3741415840]0ENV Logging level for Module: CRSMAIN 0
2010-05-27 11:55:06.008: [    CRSD][3741415840]0ENV Logging level for Module: CRSPLACE 0
2010-05-27 11:55:06.010: [    CRSD][3741415840]0ENV Logging level for Module: CRSAPP 0
2010-05-27 11:55:06.012: [    CRSD][3741415840]0ENV Logging level for Module: CRSRES 0
2010-05-27 11:55:06.015: [    CRSD][3741415840]0ENV Logging level for Module: CRSOCR 0
2010-05-27 11:55:06.017: [    CRSD][3741415840]0ENV Logging level for Module: CRSTIMER 0
2010-05-27 11:55:06.019: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [148436880] retval lht [-27] Signal CV.
2010-05-27 11:55:06.019: [    CRSD][3741415840]0ENV Logging level for Module: CRSEVT 0
2010-05-27 11:55:06.022: [    CRSD][3741415840]0ENV Logging level for Module: CRSD 0
2010-05-27 11:55:06.024: [    CRSD][3741415840]0ENV Logging level for Module: CLUCLS 0
2010-05-27 11:55:06.027: [    CRSD][3741415840]0ENV Logging level for Module: OCRRAW 0
2010-05-27 11:55:06.029: [    CRSD][3741415840]0ENV Logging level for Module: OCROSD 0
2010-05-27 11:55:06.032: [    CRSD][3741415840]0ENV Logging level for Module: CSSCLNT 0
2010-05-27 11:55:06.034: [    CRSD][3741415840]0ENV Logging level for Module: OCRAPI 0
2010-05-27 11:55:06.036: [    CRSD][3741415840]0ENV Logging level for Module: OCRUTL 0
2010-05-27 11:55:06.039: [    CRSD][3741415840]0ENV Logging level for Module: OCRMSG 0
2010-05-27 11:55:06.041: [    CRSD][3741415840]0ENV Logging level for Module: OCRCLI 0
2010-05-27 11:55:06.043: [    CRSD][3741415840]0ENV Logging level for Module: OCRCAC 0
2010-05-27 11:55:06.046: [    CRSD][3741415840]0ENV Logging level for Module: OCRSRV 0
2010-05-27 11:55:06.048: [    CRSD][3741415840]0ENV Logging level for Module: OCRMAS 0
2010-05-27 11:55:06.048: [ CRSMAIN][3741415840]0Filename is /u01/app/crs/crs/init/linux1.pid
[ clsdmt][1401583936]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=linux1DBG_CRSD))
2010-05-27 11:55:06.119: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149741888] retval lht [-27] Signal CV.
2010-05-27 11:55:07.002: [ CRSMAIN][3741415840]0Using Authorizer location: /u01/app/crs/crs/auth/
2010-05-27 11:55:07.008: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149755728] retval lht [-27] Signal CV.
2010-05-27 11:55:07.230: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149740416] retval lht [-27] Signal CV.
2010-05-27 11:55:07.380: [ CRSMAIN][3741415840]0Initializing RTI
2010-05-27 11:55:07.380: [CRSTIMER][1422563648]0Timer Thread Starting.
2010-05-27 11:55:07.386: [ CRSRES][3741415840]0Parameter SECURITY = 1, running in USER Mode
2010-05-27 11:55:07.386: [ CRSMAIN][3741415840]0Initializing EVMMgr
2010-05-27 11:55:07.453: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150974816] retval lht [-27] Signal CV.
2010-05-27 11:55:07.474: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150975552] retval lht [-27] Signal CV.
2010-05-27 11:55:07.485: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150988032] retval lht [-27] Signal CV.
2010-05-27 11:55:07.723: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150998720] retval lht [-27] Signal CV.
2010-05-27 11:55:07.734: [ CRSMAIN][3741415840]0CRSD locked during state recovery, please wait.
2010-05-27 11:55:07.737: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150997792] retval lht [-27] Signal CV.
2010-05-27 11:55:07.923: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [151007072] retval lht [-27] Signal CV.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0CRSD recovered, unlocked.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2010-05-27 11:55:08.051: [ CRSMAIN][3741415840]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=linux1-priv)(PORT=49896))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0Starting Threads
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0CRS Daemon Started.
2010-05-27 11:55:08.204: [ CRSRES][1527462208]0StopResource: setting CLI values
2010-05-27 11:55:08.220: [ CRSRES][1527462208]0Attempting to stop `ora.linux1.vip` on member `linux2`
2010-05-27 11:55:08.515: [ CRSRES][1527462208]0Stop of `ora.linux1.vip` on member `linux2` succeeded.
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0Attempting to start `ora.linux1.vip` on member `linux1`
2010-05-27 11:55:08.686: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154566384] retval lht [-27] Signal CV.
2010-05-27 11:55:14.000: [ CRSRES][1527462208]0Start of `ora.linux1.vip` on member `linux1` succeeded.
2010-05-27 11:55:14.231: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.272: [ CRSRES][1527462208]0Attempting to start `ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1`
2010-05-27 11:55:14.426: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.426: [ CRSAPP][1527462208]0StartResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.489: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.489: [ CRSAPP][1527462208]0StopResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.495: [ CRSRES][1527462208][ALERT]0`ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:14.628: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.698: [ CRSRES][1527462208]0Attempting to start `ora.linux1.ASM1.asm` on member `linux1`
2010-05-27 11:55:14.836: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.836: [ CRSAPP][1527462208]0StartResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.875: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.875: [ CRSAPP][1527462208]0StopResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.881: [ CRSRES][1527462208][ALERT]0`ora.linux1.ASM1.asm` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.051: [ CRSRES][1527462208]0CRS-1028: Dependency analysis failed because of:
'Resource in UNKNOWN state: ora.linux1.ASM1.asm'
2010-05-27 11:55:15.185: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:15.237: [ CRSRES][1537952064]0startRunnable: setting CLI values
2010-05-27 11:55:15.306: [ CRSRES][1558931776]0startRunnable: setting CLI values
2010-05-27 11:55:15.339: [ CRSRES][1527462208]0Attempting to start `ora.linux1.gsd` on member `linux1`
2010-05-27 11:55:15.397: [ CRSRES][1537952064]0Attempting to start `ora.linux1.ons` on member `linux1`
2010-05-27 11:55:15.407: [ CRSRES][1558931776]0Attempting to start `ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1`
2010-05-27 11:55:15.789: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.789: [ CRSAPP][1527462208]0StartResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.808: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.808: [ CRSAPP][1537952064]0StartResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.812: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.812: [ CRSAPP][1558931776]0StartResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.838: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.838: [ CRSAPP][1527462208]0StopResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.844: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.845: [ CRSAPP][1537952064]0StopResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.849: [ CRSRES][1527462208][ALERT]0`ora.linux1.gsd` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.859: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.860: [ CRSAPP][1558931776]0StopResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.863: [ CRSRES][1537952064][ALERT]0`ora.linux1.ons` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0Human intervention required to resume its availability.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.869: [ CRSRES][1558931776][ALERT]0`ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0Human intervention required to resume its availability.
2010-05-27 11:55:20.450: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
2010-05-27 11:55:21.130: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
I tired this solution it was on website “but it did not work”
下面是METALINK给出的解释：
I have checked the information provided. crsd is reporting timeouts when running the checking actions. The racgmain process on the other hand, executed by racgwrap, remain running so the number is increasing.This issue has been reported in Bug 7009245 ""RACGMAIN CHECK" PROCESS NOT TERMINATING", and drill down and determine the root cause this require to get a stack trace from racgmain process(es) as well as you should runOSWatcher with a specific parameters, finally the issue of Bug 7009245 has been fixed by the fix of Bug 6196746 (unpublished bug -- summary is "racgwrap spawns racgmain child process. crsd timeout kills racgwrap but bot racgmain")So please perform the following action plan that intend to solve the issue.
.ACTION PLAN
============
1. Stop CRS on this node.
2. Make a copy of racgwrap located under $ORACLE_HOME/bin and $CRS_HOME/bin
3. Edit the file racgwrap and modify the last 3 lines from:
.$ORACLE_HOME/bin/racgmain "$@"
status=$?
exit $status
.to:
.# Line added to test fix for Bug 6196746
exec $ORACLE_HOME/bin/racgmain "$@"
.4. Restart CRS and make sure that all the resources are startes
This should solve the issue. also if you are not able to stop CRS right now, you can try the
solution without crs stop/start.
BUT IT DID NOT WORK
###################################################3

Lightroom Getting Started guide

For those of you who only downloaded LR and did not get the Lightroom Getting Started guide By Adobe with the Boxed version, you can now download aas High or Low Res PDF version of it at the Adobe
Photoshop Lightroom Design Center.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

http://active.tutsplus.com/tutorials/mobile/flash-for-iphone/

Lightroom Corrupt Catalog problems- Help!

Lightroom Corrupt Catalog problems reading/writing from disk when attempting to repair - Help! I have my LR box in hand and my product keys and license info but can't find the disk. I'm assuming this is the only way to repair. Suggestions, Comments are welcome and appreciated.
Thanks in advance!!!

Corrupt catalog will not be fixed by re-installing the Lightroom software (although if I were you, I'd still find that disk!)
If I were you, I would first check a recent backup of your catalog file, and see if that will open (double-click on it in your operating system). If that opens properly, I would just use that file.
If it doesn't open properly, then one trick that sometimes works is to open a blank catalog in Lightroom, then File->Import from Another Catalog and point to the catalog file.
And if that doesn't work, please write back with a lot more details, including operating system, version of Lightroom, and much more detail abou

Are you guys going to fix the iTunes 10.5 start problem for Windows 64?

Windows 7 , 64 bit. If you have any connection at all to the Internet, I am sure you are aware of the iTunes not starting problem. ALL the suggested fixes are useless for some...uninstall, reinstall, drive wipe, reboot, registry edit, registry cleaners.....all to no avail. APPLE stuff is supposed to work....I have 2 new phones here that require 10.5 to work......blah. When you click the icon, or try to start from the .exe for that matter, it appears like it is about to start...and then nothing......if you check task manager, you can see it is running.......I have tried every permutation of a fix, including wiping the hard drive and reinstalling Win7 and updating......no good
Come on APPLE fix this problem......dont make me buy android phones.......

On the "flip-side", I had the smoothest and quickest iTunes upgrade/install ever. This was on my Windows 7 Professional, 64bit system.
That you performed an assumedly 'clean' reinstall of your OS, is not a good sign. Obviously, iTunes doesn't like something within your system.
Here are the next steps that I would take if in your position:
- Are you absolutely positive that you have the 64bit version of iTunes?
- Re-download a new copy of the 64bit version of iTunes 10.5
- Try downloading iTunes from one of the 'mirror sites' - FileHippo is good
- Call your PC's manufacturer and see if they are aware of any conflicts with your specific machine's build with respect to iTunes
- Temporarily use another PC (if available) to get your iPhones up and running
Best of Luck

Lightroom 3 starting problem

Similar Messages

Maybe you are looking for