Lightroom 3 will not import

I have Lightrrom 3, i7 quadcore desktop pc. I can no longer import any type of image and when I try the screen tells me that import is in progress but never completes and the designated file only contains folders label "temporary folder" that is empty and there appears to be one of theses folders for every image.

Du you have any videos in the import batch?
How do import - card reader or cable?
Do you use any other software to touch your files before importing?

Similar Messages

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

Why does this happen?--"The following files were not imported because they could not be read." Lightroom will not import ANY files.

Lightroom cannot read files, yet they can be imported by copying them.

Jim is correct. This is very likely a permissions problem. If you have checked and are CERTAIN the permissions are correct you should, in this order:
1.Repair Permissions
2.Reset your preference file by holding down [Shift][Opt] and Launching Lightroom.

Lightroom 4.4 will not import NEF RAW files from Nikon D610

I shoot a Nikon D800 and have never had any issues importing my NEF RAW files into Lightroom. I borrowed a friend's Nikon D610 and shot a bunch of NEF RAW files. I downloaded them to my computer the same way I always do. For some reason, Lightroom will not import them. The error message is: "The files are not recognized by the raw format support in Lightroom. (455)"
My Lightroom 4.4 is current and up-to-date.
Bottom line: I have a bunch of RAW photo files I can't import into Lightroom for editing. Any help would be GREATLY appreciated!

>Just curious -- is there some difference between the NEF files created on my Nikon D800 (which are easily imported into Lightroom) and the NEF files created on the Nikon D610 (which are not easily imported into Lightroom)
Lightroom 5 supports the D610. There is a big difference between nef from the D610 and older cameras. They were shot with a camera that Adobe hadn't profiled yet when LR 4.4 was out. Otherwise, if you hack the nef files to read that they were shot on a D600, LR 4.4 will read them, but I would caution against doing that as the sensor is slightly different on the D610 than on the D600, resulting in differences in color rendering. Simplest is as dj says to convert the nets to dng (which embeds the newer profiles in the file) or to upgrade to LR 5.

Sony a7 mk2 ARW files will not import

I have a Sony RX100 and LR 5.7 imports the ARW files ok, However I've just bought an A7 Mk2 and Lightroom will not import the ARW files from that camera. I've downloaded CameraRaw 8 so I can convert the files first and then import into LR, but it seems strange that I cant import and convert from withing LR itself.

Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5857
Use the links above to upgrade to LR 5.7.1 or if you have a Creative Cloud account subscription login to your account and check if there is a button indicating "install" available next to Lightroom and proceed to click the button and install the update.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Lightroom 5 will not import selected images from my SD

Lightroom 5 will not import selected images from my SD card on my IMac . My Camera is a Canon 650D it will open them on my pc copy. My Lightroom 4 on my IMac will also import from an sd card. Help please.

Why not? What happens? If there is an error message, please quote it in its entirety, word-for-word, verbatim.

Lightroom 5.7 will not import images from my nikon cameras

Lightroom 5.7 will not import my Nikon DSLR images although iPhoto will on an iMac

Duplicate thread, do not reply here, there already is a reply atunable to import from nikon to lr5, on iMac iPhoto works

Lightroom 3 will not import any images

[I replied to another thread, but it doesn't seem to be coming up at the top of the post list when I update my information, so I'm reposting in the hopes that someone will notice and offer some helpful advice, as this is rapidly becoming infuriating.]
I'm running LR3 on Mac OS 10.6.4.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter and Lightroom 2. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 continues to import just fine.
Anyone have any suggestions?

OK, I _think_ I have the cause & cure.
Cause:
Canon says the software [firmware?] bundled with the Canon Rebel XT "is not fully compatible with the latest version of OSX." I can continue to automatically bring up iPhoto or use ImageCapture, in any case. Thanks, but I want LR3. Canon recommended that I set the controls in ImageCapture to specify opening LR3 when a camera is detected. I did, but it was doing this before, so I saw no difference. Also, I'm not sure it was doing it reliably, before or after this change.
This software incompatibility might explain why the Canon Rebel XT was not loading into LR3, but would not explain why it was not recognized by the Finder to add to the Devices list. The Canon wouldn't get added to the Devices list in OSX 10.4.11, either.
ImageCapture could easily see the images on the camera, and could copy them to a HD without difficulty. But it's not LR3, and nothing convinced the Finder to add the camera to the Devices.
Cure:
What I did find, eventually, as a method for persuading LR3 to import properly is this:
I set ImageCapture to open itself when it recognizes a camera.
I jack in the camera, and ImageCapture opens.
THEN I open LR3. It comes up with the present images in the library.
I _click_ on the Import button (lower left), OR use the keyboard command (cmd-shift-I). It opens the import display, _with_ the images from the camera.
I set the LR3 import settings as I want them - I Copy the files, change file names, presets, etc. as desired. (I make a habit not to erase the camera files, until all is said and done, and the camera is disconnected from the computer.)
I click the Import button, and it does!
SUCCESS!
If I have it open ImageCapture first, that seems to persuade LR3 that images are on the camera.
Sometimes iPhoto accomplishes the same end, but I'd rather not launch that - subsidiary issues.
I went through this sequence a number of times, starting from neither software open. I tried different sequences - LR3 then ImageCapture, camera first or last, etc. The above sequence worked reliably; the others' responses confused me.
Those of you with similar Canon uploading problems, see if this helps any. If you don't have ImageCapture, try it with iPhoto instead. Just open it first.
sandrift71, does this answer your original question & resolve the problem for you?
Message text clarified - edited by: Jay_Warner

Lightroom will not let me import photos from either camera or desktop. I can see them in the preview part of Lightroom but when I click import, just says they can't be read. HELP!

Lightroom will not let me import photos from either my camera or my desktop. They show up in the preview bit of Lightroom and I select the ones i want to import, then add my metadata info etc and file handling, but then when I hit IMPORT just keeps saying they can't be read. SO FRUSTRATING.

F. McLion wrote:
You are copying the photos. Does LR have the permission to delete the files from its source location - as DdeGannes suggested? Maybe this dialog is misleading.
Did you try to just add files copied to the destination before - just for finding the issue?
If nothing helps: Any chance you can upload one of the jpg to some file sharing service so we can have look at it?
I believe DdeGannes suggested permission on the Destination folder (not the source folder). Performing a copy requires only Read&Write permission on the destination folder, not the source folder. You need to go into your operating system and change the permissions to Read&Write on the destination folder. (If you don't know how to do that, go to your favorite search engine and type in Change Permissions Mac)

Lightroom 4.1 will not import video from the Olympus OM-D EM-5

Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.

Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
http://forums.adobe.com/message/4882852#4882852
SUGGESTION:
Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

Lightroom 5.2 will not import a Canon CR2 picture from my Canon EOS Rebel XSi

Lightroom 5.2 will not import a Canon CR2 picture from my Canon EOS Rebel XSi

I have this camera model and it has been supported by Adobe products for many years, already, including LR 5.2.
If your XSi CR2 files won’t import into LR, then something may have corrupted the files, or the process you’re using isn’t quite right.
As others have said, please give more details of the process you’re using, any error messages you receive, and if necessary, you can supply a CR2 file for others to examine, by uploading to http://www.dropbox.com and posting a public download link to a reply, here.

Trial version of Lightroom 5 will not import from a media card [was: Terrie]

I have the trial version of lightroom 5 & it will not import from a media card

Do you mean that the automatic import dialogue box does not appear?
Or something else?

Lightroom 4.1 will not import files with a backslash in the name

Lightroom 4.1 will not import files with a name containing a backslash "\" I am using a Mac running OSX 10.6.8 (Snow Leopard). Under Preferences I have checked and "Treat the following characters as illegal" is set to "/:"

Your preferences and configurations will not be deleted. Of course, I'd advice you to back it up anyway and then completely remove LR.
You find all the files here: http://kb2.adobe.com/cps/929/cpsid_92954.html

PSE 9 and 5 will not import - says the file already exists in the catalog !

I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.

Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

Advice on .jpg files that will not import

I have .jpg files that are not importing into LR even though they open fine on my Mac. Is there anyway I can find out why LR will not import them? Any advice for dealing with images like this?
Thanks.

Usually it's due to Lr perceiving some file wonkiness that your Mac is less picky about (Lr prefers to keep details of such to itself...). ExifTool could probably fix it, without re-creating image data, if you knew how, but it might be simplest to just re-save the file using any software that will work, maybe save in tiff format, to prevent quality loss due to re-jpeg'ing a jpeg, and maybe metadata will be re-written in a format more palatable for Lightroom.
R

Lightroom 3 will not import

Similar Messages

Maybe you are looking for