Lightroom 3 will not start, even after deleting the .LOCK file.

I have read about deleting the .lock file and that did not work. I have restarted my computer and that did not work. I tried opening a backup catalog and that did not work. I delete the .lock .journal and the catalog and the resorted from the back up. It created a new cataloge but it still did not work.
Any Ideas?
All my software is updated. and was working before.
MAC OS 10.6.8
LR3         3.6
Thanks All.

Thanks for the help. However it did not work.
I held the Option key and was able to create a catalog. I should explain LR3 tries to start. Then I get a message that LR3 unexpectedly quit. I am trying one more thing. I only had 15GBs of space on the HD. I am clearing more space to see if that works. I had updated the OS too.
OS is Lion 10.7.3
and LR3      3.6
Thanks again for trying. If you think of anything else let me know.

Similar Messages

  • Lightroom crashed and now I can't open the catalog - even after deleting the lock file.

    Lightrooms crashed, which is a common occurrance. But, this last time was different. After I restarted it my catalog was not linked and all my settings were gone. I tried opening the catalog through the file menu, but absolutely nothing happens. I tried going to the folder and clicking on it but this only opens lightroom with no catalog. After having scanned this forum I found that I need to delete the .lock file, but after doing that the same things happen. Any suggestions on how to open my catalog? Will reinstalling Lightroom help?

    The problems mostly happen when I am using X-Y compare in Library mode. It shows black rectancles over the tops of the sections that contain the photos and these flash. They aren't always the same size, but are only on the top of the section - never big enough to completely cover the photos. Then I get anywhere from one to about four or five extra windows stacked on top of the Lightroom Icon at the bottom of my screen (I use Windows 8) opening and closing, though there isn't enough time for me to click on them and read them because my computer gets so slow that my mouse actin is delayed by a few seconds. And, to shut Lightroom down, I need to use Windows task manager because clicking on the little red box with the X in the upper right corner accomplishes nothing. I have a new Sony Vaio i5 chip and 8Gb RAM. This also hapened on my old computer, though not as often

  • My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

  • "use pdf reader name" choice is not shown even after deleting "mimetypes.rdf" file

    Multiple tabs open when attempting to open PDF files. Have updated Acrobat Reader to latest version X. Have followed trouble shooting instructions to select from drop-down menu the choice "use pdf reader name" (tools-options-application- Adobe). Followed the additional instruction to delete the "mimetypes.rdf" file if the "use pdf reader name" choice does not appear. Have deleted the file, and the "use pdf reader name" choice still does not appear. Can't open pdf files

    Hi tulip,
    I have changed the product because it seems that you are taking about the Firefox for Desktop Browser. If this is incorrect please post back with a correction.
    I also understand that you are downloading songs, and instead of the save dialogue, you are being taken to a black page to play the song. Please see if this happens in Safe Mode, as well when you troubeshoot any default programs if you are using Windows.
    [[Troubleshoot Firefox issues using Safe Mode]]
    Please try this:
    # Right click on the sound file/link
    # Select, Save Audio as
    # Select the file to download it in and click save.
    Please also see this for more troubleshooting steps. [[What to do if you can't download or save files]]

  • Firefox 5 hangs after new install at Checking the Add Ons and will not start even after reboot

    Downloaded V5, ran the install, started Firefox and first screen is 'Checking Add Ons', the status bar is shown and immediately hangs. Have tried to restart, have rebooted and start and Firefox will not come up. Have to drop back to V3.6

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    This can be a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

  • TS3474 My ipod will not start even after holding down the Sleep/Wake button and the Volume Down button for at least eight seconds.  What is my next step?

    I have a sixth generation ipod 16gb nano.  It will not turn on.  I have tried hoding down the power button with the down volumn button without results.
    Any other suggestions?

    i have the same problem...my ipod is 4th generation?uggghhhhh

  • Flash plugin will not install even after installing the latest version Flash

    When I go to a site that contains Flash content, it says "A plugin is needed to display this content" and there is a link to install the plugin. Additionally, there is a message at the top of the page that says "Additional plugins are required to display all the media on this page" with an option to "Install Missing Plugins." I click the link to install the missing plugin, and a dialog box pops up that says "The following plugins are available:" and lists "Adobe Flash Player 11.0.1.152" with a check box next to it. The box is checked, and I click "Next" to install. It goes through the motions, and then tells me that "No plugins were installed." There is a link to manually install the plugin, which takes me to Adobe's Flash download page. I unchecked the box to pair McAfee Security with the download, and downloaded the latest version of Flash (to be honest, I've actually downloaded this exact same version about 10 times today). The dialog box pops up, I save the file, and once it has downloaded, I open the containing folder (my downloads folder). I then close all programs (including Firefox) except for the Windows Explorer folder that I'm going to run the installer from. I double-click on the Flash installer to run the installation. The installation process completes, the installer tells me that the download is successful, and my browser opens back up with an "Installation Successful" message from the Adobe website. Yay! My installation is successful... Orrrrrr not. Navigating back to the page with the Flash media - still have a message saying I need the plugin. Attempt to download plugin again...no dice.
    THEN, I go to "Manage my add-ons" thinking maybe I need to enable the plugin. There is no Flash (or Shockwave) plugin listed on any of the menus - it's like it doesn't exist.
    I downloaded the latest version of Java because I read somewhere that Flash requires Java to work; I installed the "Add-On Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, as best I can tell.
    I also went to Adobe's page where you can see what version of Flash you're running (http://www.adobe.com/software/flash/about/) and it doesn't even show that I have Flash installed. In Internet Explorer, it does show that I have Flash installed, but it's the previous version (but that is likely due to the fact that I downloaded Flash from Mozilla, not IE, and they use different modes in each browser - so an update that you download from one browser does not necessarily apply to the other browser).
    So in summary: I do not know what on earth is wrong here, but I am about as frustrated as I have ever been in my life. I don't know why the Adobe Flash installation is saying it is successful (is it lying to me??), but there is no plugin showing up in my Manage Add-Ons menu, and I have googled every possible combination of the content in this post and have not found a solution that works yet.

    NOTE: Just discovered that Adobe is making a bigger mess than any previously.
    They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
    *32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
    *64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe

  • My MacBook Pro will not charge, even after resetting the SMC.

    My MBP will not charge. It's only a little less than 2 years old. I've reset the SMC and even an employee at the genius bar has, it still isn't charging. When I plug in the cord, my battery remains at 13% with a plug icon inside the battery. When I click on the battery, it says "Battery Not Charging" in gray.
    This is my battery information:
    Battery Information:
      Model Information:
      Serial Number:          9G1300072D3MA
      Manufacturer:          DP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          201
      Hardware Revision:          2
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          685
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5448
      Health Information:
      Cycle Count:          336
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          11099
    Please help!!

    When I plug in the cord, my battery remains at 13% with a plug icon inside the battery.
    Try  Troubleshooting MagSafe adapters
    And try a different electrical outlet.

  • ITunes will not start even after permission repair, disk repair.....

    Let me continue plst files, deleted old install and re-installed, downgraded version, ran disk warrior, tried new user account. Backed up everything re-installed fresh OS, still did not start, installed update plus latest version of iTunes. Still does not start. Called Apple support, did the usual permissions repair etc..... Ran Apple Hardware Test no problems found, TechTools Deluxe no problems, MemTest no problems.
    On hold now waiting for Apple support again. I am assuming at this point there is a unknown hardware issue. Any ideas?

    You really went the extra mile trying to pin down the culprit! So.... who was the culprit anyway? which hub? the keyboard acts as hub, was this powered or un-powered, too? which would be of interest.
    Instead of hub, maybe a PCIe USB2 card?

  • ITunes 11.1.4.62 will not install correctly after deleting the previous version

    After being insessantly nagged to install the latest version of iTunes (11.1.4.62) I atempted to do so.  I refuses to install correctly citing a problem with the remote device installer (?).  Can I install the previous version?  How do I get it?

    Hello svt48,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My Ipod will not unlock even after updating the software

    Hi, I have an iPod Nano 4G, is locked to the Apple logo and iTunes will only recognize it when I go into hard disk mode.
    and update your iPod with iTunes via the internet and everything was done in order but the iPod still has the apple logo screen
    and check the test team that brings the same (Disco OK, OK Display, Touch control ok)
    I do not know what else to do, I thank you beforehand all the help I can get
    Greetings

    Do you mean you can't unlock it?
    We have no way of knowing exactly which online instructions you may have tried.
    Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
    iPod touch: Hardware troubleshooting

  • Will not start even in safe boot after installing latest camera update

    MacBook Pro will not start even in safe boot after installing latest camera update.
    I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

    I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
    If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • Lightroom will not start up the message I get is

    A problem caused the program to stop working correctly Windows will close the program and notify you if a solution is available.
    Lost

    Thank you I'll try that
    Date: Wed, 16 Nov 2011 13:54:08 -0700
    From: [email protected]
    To: [email protected]
    Subject: Lightroom will not start up the message I get is
        Re: Lightroom will not start up the message I get is
        created by web-weaver in Photoshop Lightroom - View the full discussion
    Try it one more time - unless you have tried it already more than once.If the message appears again, you have to re-install LR.You can download the latest version from Adobe using your Serial key #.WW
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4030407#4030407
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4030407#4030407. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • Disabling fields(Make the field as non-editable)  in webdynpro ALV

    HI All, I have a requirement in the ABAP webdynpro where I have to disable(Make the field as non-editable) the field(or that ALV cell alone)  in the ALV after the user has inputed in that field. Is it possible, if yes, could you please give me some s

  • Nvidia GeForce 7300 GT with dual link DVI connector..

    With my old MD PowerMac G4 I ran a 23" Apple display and connected a Sony Bravia HD TV through the HDMI/DVI cable. I cannot physically connect both at the same time. Either one connector blocks the other from completely seating to the video card. It

  • MBPro and monitor not staying asleep; new problem

    Suddenly my new MBPro and its 24" monitor won't stay asleep!. I ordinarily use the 24" monitor, leaving lid on my MBPro shut. At night, I choose 'sleep" from the Apple menu and the mac and monitor sleep. Suddenly, past couple of days, when I do this,

  • Complete range of Pulse-Widt​h Measuremen​t

    Hi, I am having an issue with PW Measurement, I need to read a Duty cycle in a percentage range from 0% to 100%.  The problem I have is the signal has not crossed the mid reference level enough times to measure, or the histogram cannot be used becaus

  • How to put database in single user mode?

    hi how to put database in single user mode?and what could be the impact of this to EBS R12 RUP 6.DB 10.2.0.0 rgrds