Lightroom 4.1 details panel missing

My lightroom 4.1 is missing the details panel along the side? I upgraded a few last month and cant find the details panel with the noise reduction etc.

Thank you

Similar Messages

Lightroom 5.6 is missing details panel!

I'm looking to sharpen my image and just realized that I'm completely missing the details panel on the right side of my develop section. Am I missing something? I just upgraded & bought a new computer. AH, HELP!

in previous versions of lightroom the "detail" panel was in the "Develop" area. I'm able to get into develop and have "basic", "tone curve", "HSL/color/BW", "split toning","lens corrections", "effects" and "camera collaboration" but not detail.

Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

Why does the Amount slider on the Detail Panel reset to 0 when saving the file as a Smart Object?

Whenever I open a Smart Object PSD file to adjust previous settings in RAW, I have noticed that the Amount slider in the Detail panel has reset to 0. Does this reduce the files sharpening? Is this a normal behavior? Can this be prevented?
I use a Mac running 10.6.8 and Photoshop CS6, version 13.0.5 x 64.

This behavior happens only on Mac desktop computer, not on my Mac laptop running the same CS6.
After I've edited an ACR file (including sharpening in the Detail panel), I change the file into a PSD Smart Object to complete my edit by clicking on "Open Object". I immediately notice this PSD file is not sharp. If I click on the bottom right of the image icon to return to the RAW file, I find the Amount slider in the Detail Panel has changed from the sharpening amount I gave it, to 0.
If I do the exact same thing on my laptop (running a duplicate of the same Photoshop CS6), this behaviour does not happen. The image remains sharp as a PSD file, and if I check by returning to ACR, the Amount slider has maintained its setting.
Anything more you need?

After F110 run in the payment file the account holder details are missed

Hai
After running the F110 pament run, In the payment file the ACCOUNT HOLDER name is missing . The ACCOUNT HOLDER details must picked up from VENDOR MASTER. This is happening when ACCOUNT HOLDER and VENDOR are different. When ACCOUNT HOLDER and VENDOR are same it is displaying Correctly.The Bottom line is when VENDOR=ACCOUNT HOLDER, in the payment file it is displaying the VENDOR name correctly. But When VENDOR is not= ACCOUNT HOLDER, in the Payment file ACCOUNT HOLDER name is blanked out. The bank requires the name in that field in the payment file.
Kindly Assist me
Thanks in advance
Regards,
Akash Narayana

Hello Friends - Can you please give me a little idea on what could be the reason for the below issue.
We are using the program RFFOJP_T and when payment file is generated, some of the payment details are missing.
I have executed payment run for 5 payments and only one 1 has come to the file and below 4 are missing.
The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    9770 1400001524
    9770 1400001525
    9770 1400001526
    9770 1400001527
The accompanying payment media have not been generated
>
> Overview of the files generated (DME)
> Name / File name
Thanks

Payment details are missing in the file generated by driver program RFFOJP_T

Hello Friends – We send the payment files generated by driver program RFFOJP_T (Payment Medium Japan - Domestic DME (and Bank Charges)). Now, we see issue that couple of payment details are missing in Output file/AL11.
If 20 payment documents are created in F110, only few are shown in AL11/Output file.
Can you pls give me a little idea on how to analyze this issue.
Thanks

Hello Friends - Can you please give me a little idea on what could be the reason for the below issue.
We are using the program RFFOJP_T and when payment file is generated, some of the payment details are missing.
I have executed payment run for 5 payments and only one 1 has come to the file and below 4 are missing.
The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    9770 1400001524
    9770 1400001525
    9770 1400001526
    9770 1400001527
The accompanying payment media have not been generated
>
> Overview of the files generated (DME)
> Name / File name
Thanks

Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?

Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?

If Nancy's advice doesn't make it pop up as a window, you may have it set as a tool bar, in which case, hitting Ctrl+F2 will make the tool bar appear/disappear.
To turn it back into a floating panel, click and drag the dashed line on the far left of the Insert tool bar and pull it away from the top. You can leave it as free floating or drag it to another edge until it highlights the edge and drop it to dock it to whichever side of the screen you prefer.

Why does the Amount slider of Camera's RAW Detail Panel revert to 0 when opening a Smart Object in Photoshop?

I use CS6 on a Mac running 10.6.8. I edit images in RAW, then covert to a Smart Object for final editing in Photoshop. I've noticed the image in Photoshop is not sharp, and when I check by returning to RAW, I can see that just the Amount slider (Detail Panel) has reverted to 0, but the other sliders are as I have set them.
Does anyone know what may cause this problem and how to solve it?

This behavior happens only on Mac desktop computer, not on my Mac laptop running the same CS6.
After I've edited an ACR file (including sharpening in the Detail panel), I change the file into a PSD Smart Object to complete my edit by clicking on "Open Object". I immediately notice this PSD file is not sharp. If I click on the bottom right of the image icon to return to the RAW file, I find the Amount slider in the Detail Panel has changed from the sharpening amount I gave it, to 0.
If I do the exact same thing on my laptop (running a duplicate of the same Photoshop CS6), this behaviour does not happen. The image remains sharp as a PSD file, and if I check by returning to ACR, the Amount slider has maintained its setting.
Anything more you need?

Start of UME Service Failed". Technical details: 'password' missing

Hi, I am facing a problem with UME Configuration of a Double Stack ABAP+Java Netweaver 7.01 System.
The Java Engine won't come up.
Though I have unlocked J2EE_ADMIN, J2EE_GUEST and SAPJSF in the ABAP User Management, after Restart of J2EE-Cluster the J2EE Engine doesnt't come up with the following Error (in std_server0.out):
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: 'password' missing at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398) at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31) at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156) Caused by: com.sap.security.core.persistence.datasource.PersistenceException: 'password' missing at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236) at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491) at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.(PrincipalDatabagFactoryInstance.java:446) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63) at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221) at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287) ... 6 more [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. Jun 16, 2010 8:07:30 AM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_59] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
When I try to reset the password of J2EE_ADMIN in the configtool the following message appears: "The value is different from previous!" Maybe this is 'cause I chose a password that I've used sometimes before, but when i enter something like '123456' or 'geheim' or something else the same message appears.
Please tell me how i can resolve the "The value is different from previous!"-Problem, because it's really critical by now. Thanks for your help.
regards,
Carsten

Hi Blanca,
First I have to thank you for your answer.
I followed the steps you provided:
the master client in the system is 100.
In client 100 the users SAPJSF, J2EE_ADMIN and J2EE_GUEST exist and are active.
I reset the password of SAPJSF on the ABAP side and after that in configtool i adjusted the values for
ume.r3.connection.master.client (100) and ume.r3.connection.master.user (SAPJSF).
But when it comes to save a new value for the *.master.passwd the same error appears.
"The value is different from previous!".
Any ideas?
thanks beforehand and regards
Carsten

Succession Planning 3.0 SP1: Org Unit Detail Panel is empty

Hi,
My Org Unit Details Panel shows up empty when I click the following:
1. My Work Area -> My Org Units (Visualise)
2. Expand the hierarchy and select any Org Unit (double click)
3. The details panel on the right shows up empty.
In the log, I see this but I'm not sure what it means. Can anyone help?
640. 07 Apr 2011 13:40:38 INFO com.nakisa.Logger - Invoking action:chartviewdetails [5ec061f693fd455b84842e3e3725f548]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
641. 07 Apr 2011 13:40:38 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HRTMC_GET_ORGUNIT_ATTR took: 59ms
642. 07 Apr 2011 13:40:38 WARN com.nakisa.Logger - Hrtmc_Check_Pd_Authorization.getDataSet() : Invalid fcode 'INSE' found in the data element'
643. 07 Apr 2011 13:40:38 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HRTMC_CHECK_PD_AUTHORIZATION took: 19ms
644. 07 Apr 2011 13:40:38 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HRWPC_RFC_STRUCTURE_GET took: 49ms
645. 07 Apr 2011 13:40:38 INFO com.nakisa.Logger - chartviewdetails on OrgChartAppEventProcessor took: 352ms

Hi there,
There is either a SAP program error or there is an application bug with the data element. It looks like the first, so try implementing these SAP notes, if applicable to your system:
u2022 1531422 - Autom. delim.: PD framework instantiation and plan version
u2022 1565542 - Incorrect authorization message for inactive employees
Also have a search through SAP notes in SMP. If that does not resolve your issue then raise an OSS message.
Best regards,
Luke

Succession Planning 3.0 : Successor Details Panel is empty

Hi,
I'm on Succession Planning 3.0, build 354.
When I do the following:
My Work Area -> My Org Unit -> Expand Position -> Expand Successor -> Double click on Successor
The Details Panel on the right is empty. I checked the corresponding Details Designer in Admin Console, it is empty also. Is this normal?
Here's the log:
1191. 17 Feb 2011 13:59:06 INFO com.nakisa.Logger - Invoking action:chartviewdetails [3f12976792264c698718d10f3a4f9895]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
1192. 17 Feb 2011 13:59:06 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
1193. 17 Feb 2011 13:59:06 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
1194. 17 Feb 2011 13:59:06 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HRTMC_GET_TALENT_ATTR took: 354ms
1195. 17 Feb 2011 13:59:06 INFO com.nakisa.Logger - chartviewdetails on OrgChartAppEventProcessor took: 602ms

Hi there,
That is definitely not normal behaviour! You can probably correct the issue yourself in the XML, although if you aren't comfortable with doing that I would raiase an OSS note for a new build.
Best regards,
Luke

Matser Table/Detail Table -- Hide detail panel when no row

Hi,
I would like to hide the detail panel when the user selects a row in the master table without detail.
I try to put something like this:
<af:panelHeader
rendered="#{bindings.MyView2.estimatedRowCount>0}">
But it does not work, instead the previous detail rows are display when there is no detail rows for the master row.
I need to to press a button <af:commandButton text="Apply change"/> , to render the page correctly.
The selection facet used in the master table is defined as follow:
<f:facet name="selection">
<af:tableSelectOne autoSubmit="true"></af:tableSelectOne>
</f:facet>
Where am I wrong, it is my first project with ADF ?
Any help will be appreciate,
Thanks,

Well not really clear if it's a bug or not, but here's two workarounds:
1- the table is surrounded by a panelCollection, if we add a partial trigger from the panelCollection to the table, on every change of row selection the table refreshes itself.
2- The second option was to remove the primary keys from the entity, and force it to use RowId as the primary key.
This is such a weird behavior in ADF, it's one of the basic things that one will do in an application. We tried to do a test on a smaller app and it gave the same results.
Here's the scenario:
Master/detail linked by two keys
Master PK (key1, key2)
Detail PK (key1, key2, key3) => key1 and key2 are the link between the tables.
If anyone can reproduce this and confirm if it's a bug, it would be greatly appreciated.
Mo

TalentFramework module - Position Details Panel General Information

Dear Nakisa Experts,
TalentFramework module
I would like to know in Position Details Panel > General Information.
May I know how:
1. to make field Org Unit field data unclickable.
2. to enable additional fields Cost Centre and Qualification/Experience
Please specify which folder and file need to be configure in Nakisa.
Hope you guys could help me on this.
Regards,
Andi Rossi

Hi Andi,
1. The Position Details Panel does not have OrgUnit listed on it.
2. To achieve this you need to follow this procedure in the AdminConsole:
a. Create a new function in the AdminConsole in Application-wide Settings > Data Center > Edit/Create new data element joining multiple SAP Tables
b. Navigate to Job Architecture module > Positions > Details Designer
c. Select Create Linked Detail
d. Enter a name, select SAPPositionDetailsConfiguration, select the data element you created in step a and then map the fields to link them together (usually ID and the key field from your new data element, possibly OBJID)
e. Add a section in the details panel using your new linked details and au voila!
All of this should be documented in the Admin guide in the Root\Documentation folder.
Good luck!
Luke

Lightroom 4 Help Search Panel

When I go to Help in Lightroom 4 the search panel only has references to Photoshop Elements and not Lightroom. Is that normal. The Lightroom help is in the panel to the right but how do I search in it?
Chuck

I just ran into the same problem. The url clearly points to dutch help pages -http://help.adobe.com/nl_NL/lightroom/using/index.html. Some webmaster at Adobe must have made a mistake!
The english Help can be found here:
http://help.adobe.com/en_US/lightroom/using/index.html

Write in Details Panel

Hi,
in ver. 14.0.4 when I execute the application in Browser always appear a new Details Panel Arrow that hide the properties.
Is there a way, using Design Studio, to write in this Details Panel? (for examples the filters tha I used in Report)
Thanks

Hi J,
This certainly can be disabled. I was sure there were some instructions to do it in the Admin guide but I can't find them. Anyway, in Templates_SAP there are two files: CallFromXSL.xsl and CallFromXSL_Remove.xsl. Basically, to remove the Call From drop down rename CallFromXSL_Remove.xsl to CallFromXSL.xsl. Make sure to backup your original!
I hope that helps.
Luke

Lightroom 4.1 details panel missing

Similar Messages

Maybe you are looking for