Lightroom 4.1 RC Put to the test...bizarre outcome

OK, so we put lightroom 4.1RC to an "Un-Tethered" test yesterday, shooting with the new Canon 5D Mark 3, and importing the files using a CF card reader.
I had upgraded to 4.1 RC the day before, and had upgraded the Camera RAW to 6.7RC as well...just to be able to read the new files from this camera.
Anyhow, everything worked great, and the files looked sharp (I know there has been some concern about a "softness" issue, but we experienced no softness...even when shooting primarily with a Canon 50mm 1.0 lens!).
Now here comes the most bizarre part...
As always, the clients ask "Can you email me that photo I really like?"
"No problem", I respond, "I can email it directly from this program"...
Using the "EMAIL" function in Lightroom 4.1RC, I sent the client an email with 2 images from our shoot.
I added myself to the recipient list as well.
Getting stranger...
My client receives the 2 photos on her Andriod phone, and they are fine.
I receive the same email on my iPhone with 2 TOTALLY DIFFERENT PHOTOS FROM A SHOOT LAST SATURDAY!!
Wha?
Ok, weird. :-/
I try again....Sending the email once again to myself (iPhone 4) and my assistant (iPhone 3)
I again receive the wrong images, and my assistant receives the correct images.
I head home after the shoot, and try opening up the same email attachments on my iPad2.
Now...ALL the emails have the photo of today's subject...but it's now the same photo, in every email attachment...not the 2 different photos I attached.
Que hahaheho?
Ok...I pull out my MacBook Air and turn on my iMac...start up Gmail....and low and behold...
The correct images appear in all the emails on these systems.
But...my iPhone and iPad are still, to this moment, displaying the WRONG images in the emails I sent.
I've never seen this happen before...and really can't even fathom why this would happen.
I'll happily give you a dollar if you can figure this one out.
Matt Beard
[email protected]

First of all, 4.1 is a release candidate, not really ready for prime time.  I wouldn't rely on all those e-mail features to work exactly as they should based on what others have been reporting about the behavior of Lightroom 4.1.  To be safe, it would probably have been better to export copies and then NOT use Lightroom to send the e-mail.  I don't rely on Lightroom to do everything anyway.  I want to make sure I have everything right.
I don't know why you got the results that you did.  It is bizarre.  It should be reported.  But, based on the way Lightroom 4 has been performing, I would recommend being a little more cautious and use more dependable means for the time being.

Similar Messages

  • QOS Policy gets Policy hits but doesn't seem to do anything when put to the test

    I have been trying to implement a policy that prioritizes certain types of of traffic over another namyly Lync Voice Traffic, Cisco CAPWAP traffic from controllers to AP's, and Citrix ICA Traffic. 
    I do recieve policy hits but when I load the connection up with say copying a file the policy seems to not work. This is on a 1921 router. 
    I will include the config as I may be doing somthing wrong.
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    aaa new-model
    aaa authentication login default group radius local
    aaa authorization exec default group radius local
    aaa session-id common
    ip cef
    ip domain name pmp.local
    no ipv6 cef
    multilink bundle-name authenticated
    username XXXXXXXXXXXXXXXXXXXX
    ip ssh time-out 60
    ip ssh version 2
    class-map match-any CAPWAP
     match access-group 104
    class-map match-any LYNC
     match access-group 103
    class-map match-any CITRIX
     match protocol citrix
     match access-group 110
    policy-map OUTBOUND
     class LYNC
      priority percent 25
     class CITRIX
      priority percent 50
     class CAPWAP
      priority percent 20
     class class-default
      shape average 20000000
    interface Embedded-Service-Engine0/0
     no ip address
     shutdown
    interface GigabitEthernet0/0
     no ip address
     duplex auto
     speed auto
    interface GigabitEthernet0/0.1
     description LAN Facing
     encapsulation dot1Q 1 native
     ip address 172.16.27.254 255.255.255.0
     ip helper-address 10.128.4.48
     ip helper-address 10.128.4.20
     ip helper-address 172.16.27.79
     no ip redirects
     ip flow ingress
    interface GigabitEthernet0/0.5
     encapsulation dot1Q 5
     ip address 172.16.127.254 255.255.255.0
     ip helper-address 10.128.4.48
     no ip redirects
     ip flow ingress
    interface GigabitEthernet0/0.50
     description ITTestVlan Interface
     encapsulation dot1Q 50
    interface GigabitEthernet0/1
    description PointToPoint
    bandwidth 20480
    ip address 10.0.27.254 255.255.255.0
     no ip redirects
     ip flow ingress
     duplex full
     speed 100
     service-policy output OUTBOUND
    router eigrp 10
     network 10.0.27.0 0.0.0.255
     network 172.16.27.0 0.0.0.255
     network 172.16.127.0 0.0.0.255
    ip forward-protocol nd
    ip forward-protocol udp 4011
    ip forward-protocol udp bootps
    no ip http server
    ip http access-class 23
    ip http authentication aaa login-authentication default
    ip http authentication aaa exec-authorization default
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 1000
    ip route 0.0.0.0 0.0.0.0 172.16.27.253 200
    access-list 23 permit 10.0.27.0 0.0.0.255
    access-list 23 permit 172.16.0.0 0.0.0.255
    access-list 23 permit 172.16.27.0 0.0.0.255
    access-list 23 permit 172.16.127.0 0.0.0.255
    access-list 103 remark LYNC-Priorisation
    access-list 103 permit tcp any any eq 3389
    access-list 104 remark CAPWAP-Priority
    access-list 104 permit udp any eq 5246 any
    access-list 104 permit udp any any eq 5246
    access-list 104 permit udp any eq 5247 any
    access-list 104 permit udp any any eq 5247
    access-list 110 remark Citrix-Priorisation
    access-list 110 permit tcp any eq 2598 any
    access-list 110 permit tcp any any eq 2598
    access-list 110 permit tcp any eq 1494 any
    access-list 110 permit tcp any any eq 1494
    snmp-server enable traps entity-sensor threshold
    radius-server host 10.128.4.20 key XXXXXXXXXXXXXXXXXXXXXXXXXX
    control-plane

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    So what do you have, a 100 Mbps Ethernet hand-off with a 20 Mbps bandwidth cap?
    If so, you want to shape for your logical bandwidth cap and then priorize, as desired, in a child policy.
    BTW, you normally don't use LLQ for other than very time critical traffic, e.g. VoIP bearer, and Cisco recommends you don't allocate more than a third of your bandwidth to LLQ.
    I would suggest you just shape for your 20 Mbps and try FQ for all traffic.
    e.g.
    policy-map Sample
    class class-default
    shape average 20000000
    fair-queue
    NB: I'm unsure whether FQ will apply to the shaped traffic, if not:
    policy-map SampleParent
    class class-default
    shape average 20000000
    service-policy SampleChild
    policy-map SampleChild
    class class-default
    fair-queue
    NB: SampleChild is where/how you would provide a custom policy for your shaped traffic.
    PS:
    BTW, you apply the policy with the shaper to the interface.

  • I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works

    I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works with my Aperture library.

    Gracias photo-enthusiast por tu respuesta pero hay docenas de de usuarios que tienen esta mismo problema, me da la sensación que nos tomas por gagas que no tenemos ni idea de lo que tenemos entre manos.
    Me alegro enormemente que no hayas tenido tu este problema.

  • I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

    I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

    Please refer below link for more information
    Education FAQ

  • I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

    I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

    Hello Els,
    it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
    To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
    To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
    Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
    And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
    http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
    Mac: Mac OS X (Use: Show additional download options)
    http://filezilla-project.org/download.php
    Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
    Good luck!
    Hans-Günter
    P.S.
    Since I use two screens, the whole thing became even more comfortable.

  • I have purchased Adobe Lightroom 5 and put in the redemption code and downloaded the programme but the serial is not accepted. I previously had trail version

    I have purchased Adobe Lightroom 5 and put in the redemption code and downloaded the programme but the serial is not accepted. I previously had trail version

    Jennymatthews please see Redemption Code Help for information on how to redeem your redemption code.

  • Putting files onto the remote server vs. the testing server

    I have a testing server defined in my site that can only be accessed internally within the company. When I preview my pages, it automatically loads them onto the testing server and when I ask opinions about the changes I have made, my co-workers can go to that web address on our internal FTP site.
    But when I want to take those same files and put them onto our live site, I can't figure out how. I also connect to that site through FTP and have defined it in the remote server location. How do I put these files onto our real, live website?
    I've been reading tons of help topics about this, but still can't seem to figure it out

    Hi There:
    It is an easy step by step do that. Here are some really good help for you on the same:
    http://www.youtube.com/watch?v=kJhL1d9D2R4
    http://www.bgsu.edu/downloads/cio/file17760.pdf
    http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSBE25912D-A9DE-4ba1-9F85-4C692F5C14ADa .html
    And by the way why can't your colleagues see your site internally? if you have a testing server (is it IIS or WAMP?)  ...all you need to give them is something as following so that they can view it..
    http://yourmachinename/index.html
    or
    http://yourmachineIPAddress/index.html
    I believe you all are on the same network at workplace.
    Regards,
    VInay

  • How do I put test step comments into the test report?

    How do I get the comment for a test step into the test report? I see that the sequence documentation tool and the LabVIEW GUI are able to retrieve this info, but I cannot figure out how to extract it for the test report. I've gone over the API and don't see a function to read it, and I haven't found it in the sequence context at any point during sequence execution.

    If you have LabView try this...
    Message Edited by paulmw on 02-08-2007 01:41 PM
    Attachments:
    commentinreport.PNG ‏9 KB
    StepComment_testLV.seq ‏17 KB
    GetComment.vi ‏27 KB

  • Radio button to determine what text is put into the body of an email

    Hi all,
    I need some help with a radio button and java scripting. This is the code I'm using on a button with a mouse up event using Java script run at the client
    var oSubmit = this.resolveNode("$..#submit");
    var cToAddr = "[email protected]";
    var cCCAddr = "[email protected]";
    var cSubLine = "Security Access Authorization";
    var cBodya = "Dear Help Desk," + "\n" + "\n" +
    "This email serves as my electronic approval for " + "\n" + "\n"
    var cBodyb = "============ SECURITY ACCESS REQUEST DETAILS ================" + "\n" + "\n"
    var cBodyc = (EffDate.length = "")
      if(EffDate.rawValue)
    cBodyc = "Effective Date - " + EffDate.formattedValue + "\n" + "\n"
    var cBodyd = (RadBut.length == "2")
      if(RadBut.rawValue)
    cBodyd = "Status - Create New User Account" + "\n" + "\n"
    var cBodye = (RadBut.length == "3")
      if(RadBut.rawValue)
    cBodye = "Status - Add/Remove Access" + "\n" + "\n"
    var cBodyf = (RadBut.length == "5")
      if(RadBut.rawValue)
    cBodyf = "Status - Terminate" + "\n" + "\n"
    var cBodyg = (RadBut.length == "1")
      if(RadBut.rawValue)
    cBodyg = "Status - Department Transfer from " + "\n" + "\n" 
    var cBodyh = (RadBut.length == "4")
      if(RadBut.rawValue)
    cBodyh = "Request to have name changed to - " + "\n" + "\n";
    oSubmit.target = "mailto:" + cToAddr + "?cc=" + cCCAddr
    + "&subject=" + cSubLine
    + "&body=" + cBodya + cBodyb + cBodyc + cBodyd + cBodye  + cBodyf  + cBodyg + cBodyh ;
    this is the test layout I'm using
    No matter what I try, it always put all of the choices in the body of the email, not just the one I checked. any help would be greatly appreciated...Thanks Erick

    First off welcome to the group! Livecycle can be an interesting program.
    For me I am not very technically proficient in coding so I tend to gravitate to, how you say, less than elegant solutions. What I do is create an Email Submit button for each Radio button. Then I create a dummy Email Submit button (this part will be key later). From the Object Library view on each Email Submit button I set the Email Address and Email Subject that I want. Then I hide all of the Email Submit buttons with the exception of the dummy Email Submit button. From the Action Builder I then create an action on the dummy Email Submit that when the button is clicked to open a dialog box to say "Please Select an Option". I then create an action within the Action Builder on each Radio button to show the corresponding Email Submit button that has the subject line I need while also making sure to hide the dummy Email Submit button (and any other buttons if the user clicks several radio buttons). That worked for me in the past. Then I added a DocuReady event on the dummy Email Submit button to make sure it was visible and the other buttons were hidden once the form was open. Sort of a reset if you will. The downside is if the user changes nothing they still get a prompt to save the changes. I am sure that some of our more advanced coders can offer a fix to your code lines, but that is sort of the non-coder way to go about this.
    Edit: Oh I forgot to say that if you want the buttons to appear the same to the user, just overlay them together. To the user there is no change.

  • Error using the test console of the Oracle Service Bus 11gR1

    Hi I am facing a an issue while using the test console of the Oracle Service Bus 11gR1 .
    Every time I try to execute a business service or a proxy service I end up getting the following message.
    Error Accessing Test Configuration
    *"Test Console" service is not running. Contact administrator to start this service.*
    In fact to add to my frustration I am unable to execute any of my proxy services from outside clients like SOAPUI as well.
    Is anyone else facing this too ??
    Also every time the server starts I can see some diagnostic error messages on my Eclipse console.
    *[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.*
    Attached the whole log at the end below.
    To provide an update on my trouble shooting
    1. ) I tried to give the IntegrationAdmin and IntegrationDeployer roles to my admin user. in fact i also tried to give it all the possible privileges.
    Result: Still the same error message.
    Error Accessing Test Configuration
    "Test Console" service is not running. Contact administrator to start this service.
    2.) I have already tried to change the following entry <java:alsb-test-console-debug>true</java:alsb-test-console-debug> in my C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\alsbdebug.xml
    I am also attaching the file contents here
    <java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
    <java:alsb-stages-transform-runtime-debug>false</java:alsb-stages-transform-runtime-debug>
    <java:alsb-alert-manager-debug>false</java:alsb-alert-manager-debug>
    <java:alsb-credential-debug>false</java:alsb-credential-debug>
    <java:alsb-jms-reporting-provider-debug>false</java:alsb-jms-reporting-provider-debug>
    <java:alsb-management-credential-debug>false</java:alsb-management-credential-debug>
    <java:alsb-management-dashboard-debug>false</java:alsb-management-dashboard-debug>
    <java:alsb-management-debug>false</java:alsb-management-debug>
    <java:alsb-management-user-mgt-debug>false</java:alsb-management-user-mgt-debug>
    <java:alsb-module-debug>false</java:alsb-module-debug>
    <java:alsb-monitoring-aggregator-debug>false</java:alsb-monitoring-aggregator-debug>
    <java:alsb-monitoring-debug>false</java:alsb-monitoring-debug>
    <java:alsb-pipeline-debug>false</java:alsb-pipeline-debug>
    <java:alsb-security-wss-debug>false</java:alsb-security-wss-debug>
    <java:alsb-service-account-manager-debug>false</java:alsb-service-account-manager-debug>
    <java:alsb-service-provider-manager-debug>false</java:alsb-service-provider-manager-debug>
    <java:alsb-service-repository-debug>false</java:alsb-service-repository-debug>
    <java:alsb-service-security-manager-debug>false</java:alsb-service-security-manager-debug>
    <java:alsb-service-validation-debug>false</java:alsb-service-validation-debug>
    <java:alsb-test-console-debug>true</java:alsb-test-console-debug>
    <java:alsb-transports-debug>false</java:alsb-transports-debug>
    <java:alsb-uddi-debug>false</java:alsb-uddi-debug>
    <java:alsb-wsdl-repository-debug>false</java:alsb-wsdl-repository-debug>
    <java:alsb-wspolicy-repository-debug>false</java:alsb-wspolicy-repository-debug>
    <java:alsb-security-encryption-debug>false</java:alsb-security-encryption-debug>
    <java:alsb-security-module-debug>false</java:alsb-security-module-debug>
    <java:alsb-sources-debug>false</java:alsb-sources-debug>
    <java:alsb-custom-resource-debug>false</java:alsb-custom-resource-debug>
    <java:alsb-mqconnection-debug>false</java:alsb-mqconnection-debug>
    <java:alsb-throttling-debug>false</java:alsb-throttling-debug>
    <java:alsb-flow-resource-debug>false</java:alsb-flow-resource-debug>
    <java:alsb-flow-transport-debug>false</java:alsb-flow-transport-debug>
    <java:alsb-flow-deployment-debug>false</java:alsb-flow-deployment-debug>
    <java:alsb-debugger-debug>false</java:alsb-debugger-debug>
    <java:alsb-console-debug>false</java:alsb-console-debug>
    <java:alsb-result-caching-debug>false</java:alsb-result-caching-debug>
    <java:alsb-bpel-debug>false</java:alsb-bpel-debug>
    <java:alsb-jca-framework-adapter-debug>false</java:alsb-jca-framework-adapter-debug>
    </java:sb-debug-logger>
    starting weblogic with Java version:
    java version "1.6.0_18"
    Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
    Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\home11g\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\home11g\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\home11g\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
    <30-Jun-2010 16:22:43 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
    <30-Jun-2010 16:22:47 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
    <30-Jun-2010 16:22:48 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <30-Jun-2010 16:22:48 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log.>
    <30-Jun-2010 16:22:49 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
    <30-Jun-2010 16:22:56 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log.>
    <30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "wlsbjmsrpDataSource". Connections will not be tested.>
    <30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source wlsbjmsrpDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
    <30-Jun-2010 16:25:35 o'clock BST> <Alert> <OSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have Oracle Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
    <30-Jun-2010 16:25:40 o'clock BST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
    [ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log.>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.128.2.170:7001 for protocols iiop, t3, ldap, snmp, http.>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OSB_domain" running in Development Mode>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    This is really putting me off and its really disappointing to see all these issues in this new release.
    How can oracle let a release slip in with such a Major Issue.
    Please can any one help or provide a work around atleast.
    Regards
    Nitin

    I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
    Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
    As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
    I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
    If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
    startManagedWeblogic.cmd <nameOfManagedServer>
    for eg. -
    D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
    Once this server is up and running, try using test console.
    Regards,
    Anuj

  • JUnit, where to put my unit test

    Hi all,
    I have a question regarding unit test.
    I am working on a project which has multiple packages. I need to unit test every package using JUnit. One question I have is where to put my unit test. The options are:
    1. Write unit test as a separate package. This makes the code clear but only the public functions get tested or I have to make all functions public.
    2. Write unit test in the same package of the code to be tested. This makes writing test easier but putting test and code together makes the structure dirty.
    Please let me know your opinion and tell me how do you normally do this?
    Many thanks,
    Regards,
    Kevin

    It sounds like you're probably a beginner, so this might be overkill, but here goes anyway: You might want to investigate Maven, which defines a standard directory structure that includes a test tree separate from the production tree, but yet still in the same overall folder. The beauty of this design is that you can keep both production & test code together in source control, IDE projects, etc. but they don't interfere with each other.
    Even if you don't use Maven now, you might want to consider using their standard directory structure, as it is has stood the test of time, & would facilitate using Maven if you ever decide to in the future.

  • Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

    please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • If you are buying a creative suite from a personal person how does that work? Or can someone just put in the product key and get a download fro adobe creative suite??

    If you are buying a creative suite from a personal person how does that work? Or can someone just put in the product key and get a download fro adobe creative suite??

    deactivate your installation on your old computer (help>deactivate).
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • [svn:fx-trunk] 10599: -fix spark doc target so the docs are put into the resource bundle swc.

    Revision: 10599
    Author:   [email protected]
    Date:     2009-09-25 13:07:56 -0700 (Fri, 25 Sep 2009)
    Log Message:
    -fix spark doc target so the docs are put into the resource bundle swc.
    -added building of all spark localized _rb.swcs
    QE notes: localization team should look at the spark swcs
    Doc notes:
    Bugs: sdk-23256
    Reviewer:
    Tests run: yes
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/sdk-23256
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/build.xml

    Thats good news.

  • Lightroom 4.3 craches when using the brush after using redeye tool

    I have purchased Lightroom couple of days ago. I was travelling therefore I didn't have the time to upgrade to 4.3.
    The version shipped with the disk (4.1) was working like a dream. I have downloaded 4.3 yesterday and I couldn't be sadder. First I noticed that it cause the 'root' to use more CPU, meaning it doesn't use the CPU for Lightroom itself. Plus the the Application is generally and noticeably slower than original one.
    Today, I used the redeye tool for the first time, and I just can't brush on top of it without having it crashes!! It's just impossible. I rebooted. Updated my Mac to OS 10.7.5 ...  No use. I even uninstalled and reinstalled again. I was forced to do all my editing first in cluding usinf the brush, then use the redeye tool as the final step. But any moment I engage the brush after having used the red eye tool, it crashes instantaneously

    I suppose so. But the thing is that 4.2 runs just fine.
    But here you go:
    Processor  2.53 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    A bit oldish but I think it's fine (is that what you meant by set up? cuz I'm not entirely sure)
    I used the CD to install the first version 4.1 and just followed the instructions and that's what I do every time there's an update/upgrade.
    The catalog was suggested by the instructions to be put in the pictures file, so I did. and the images are there too. The other "technical" files that are related to how the software operates are located in the main Preferences folder (where all similar folders from other software are normally located"
    Thank you so much for taking the time to look at it. Do let me know if you have any other questions
    Cheers

Maybe you are looking for