Lightroom 4.1 - Shows 14 files to import/sync, then says none found

I have Lightroom 4.1 for Win7x64.
When I right-click on the folder where I keep all my photos, and choose synchronize, it says I have 14 images to import.
I click import, it does it's thing, then says 'no photos or videos were found to import' and that's it.
Tried closing/reopening and trying again, selecting/deselecting the options in the sync menu and still says 14 to import, then nothing found.
... is there a way to 'flush' the database or something?
Currently downloading the 4.2 update... on a side note... what kind of "update" is 750MB???? seriously... most programs are smaller than that!

A LR for Windows update contains an installer for both the 32-bit and the 64-bit versions of LR, but you usually only install one of those.
I would guess that they are duplicates that have a different name from the initial instance of them, and the quick check during Synchronize doesn’t figure that out, but the more sophisticated check during Import does. 
One way to determine this would be to show the Import dialog and enable the Allow Duplicates and see if the 14 are available for import, then.  I’m not saying you should import them, just determine if they are duplicates.  If they are duplicates then you can determine if you want to delete them.

Similar Messages

  • Lightroom 5 can't copy files when importing PC catalog

    Attempting to merge my old PC catalog into my newer Mac one.
    I tidied up both catalogs, then consolidated the PC catalog and media onto an external USB 3 drive (NTFS) - Mac catalog is on an external Firewire drive (Mac OS Extended Journaled). Both separate catalogs were extensively tested and were working, with all media accessible.
    I imported as catalog from the Mac catalog, and previews looked fine, and imported catalog looks fine EXCEPT almost none of the media has copied across (about 4500 photos worth!) some did, though, no idea why, or why not, in either case. Got an error message which said Lightroom couldn't copy some files.
    I did so much manual cleanup, which took days, to make this painless, I'm pretty gutted such a simple thing didn't work.
    Any idea what might be wrong and how to clean up this mess without having to go through it all manually AGAIN, please?

    OK, I'll try to give you the info you need. Firstly, I'm not the one doing the copying, I'm asking Lightroom to copy files to a new location while performing an 'import from catalog'. Also, I've just undone the previous import and I was incorrect, Lightroom copied none of the files across at all. This is all being done on the Mac, just so you know.
    Exact steps were as follows -
    1 - File -> Import from another Catalog (choose PC Catalog on NTFS HDD).
    2 - Appropriate files (all of them in fact) selected.
    3 - Settings were- File Handling - copy to: (folder on the Mac external HDD). Replace: Nothing (only new files copied). With preview.
    2 - Exact error message is "Problem importing from catalog 'Lightroom was unable to copy the files for these images to the folder you selected'." The previews appear in the catalog but with the missing file icons.
    I've removed the previous import and tried again, with the same result. In between the tries, I checked read/write permissions on both drives, which have full access, and also tried manually copying one of the folders across between the same two HDDs using the Finder (i.e. outside Lightroom), which worked perfectly, so I can't agree it's not a Lightroom issue at the moment.

  • I'm trying to import some Hi8 into FCPX via a Canon GL2.  Although the footage shows up in the import window, it says "Camera not controllable".  The manual import button does activate, but footage is not actually being imported.  Any ideas?  Thanks

    I'm trying to import Hi8 into FCPX via a Canon GL2.  Although the footage appears in the import window, it says camera not controllable.  The manual import buttons activate, but the footage is not actually importing.  Any ideas?  Thanks so much.

    What Tom said.
    Or you may be able to import using a different program - try with Quicktime Player, "New Movie Recording". If the camera appears as an option, it should work.

  • Aperture 3.4.5 will not show NEF files after importing in OSx 3.8.5

    Hi this is driving me crazy.  I have quite a few NEF files from a Nikon E5000 that I would love to be able to process using Aperture but have run into a rather difficut situation.  When I import my images into Aperture I can see the preview of the files in the browser but can not get them to display after they have been imported.  I have tried importing localy through the internal hard drive on my IMac late 2007 as well as through an external NTFS formated USB backup of my files.  It also chokes on direct imprting from the CF card using a card reader.  In all cases they will sometimes display for a brief second both in the picture browser after importing or on the film strip view but will then disapear and display "unsupported image format" in its place.  I have reinstalled aperture and run both repair persissions through disk utility and the aperture repair utility that ships with aperture.  I have no problems with canon raw files or other file formats - jpg, tiff, png, photoshop, bmp.  Also NEF files will open in lightroom 5 and photoshop cs6 with out issue as well.
    Any help in restoring functionility would be greatly appreciated.  Thanks for the time and effort in advance.
    Que Too

    Nikon E5000
    Do you mean a NIkon CP 5000 (Coolpix 5000)? Aperture supports many raw formats, but not all, because the raw support  has to be camera specific. Not all NEF files are in the same format - all Nikon cameras will call their raw files NEF.
    For some cameras Aperture never included raw support. The currently supported cameras are listed here:
    http://www.apple.com/aperture/specs/raw.html
    It looks like your camera is not on this list, so if you want to shoot raw with that camera, develope the raw files using a different raw converter (Adobe's dng converter or the suftware that came with your camera) and import tiff or dng files to Aperture.
    Regards
    Léonie

  • Lightroom 3 Corrupting .CR2 RAW files on import

    I have never used RAW files before yesterday.  About to shoot a wedding in a couple days so desperately need a fix or at least some advice for a workaround. 
    Here's my hardware list:
    Canon 7D
    SanDisk Ultra II 2 & 4 GB CF cards
    Windows 7 64x
    Internal card reader, not some flimsy USB thing
    Lightroom 3
    Problem:
    After importing .CR2 RAW files using Lightroom 3, not Bridge, I found that some (not all) of the images appear to be corrupted.  On the camera they look fine. 
    For a short moment, in Lightroom, they look fine, but then after clicking the thumbnail they instantly develop strange corruptions, like pink/yellow/opaque static. 
    This is not one of my photos, but the corrupted image looks just like this: http://thekuipers.org/images/IMG_2279.jpg
    Used some advice and downloaded Fast Picture Viewer, which allows me to view the .CR2s in the folder I imported to, and MOST of them look fine now.  Reimported to LR and now only like 8 of 200 images are corrupted.  They still export to .jpg as corrupted.
    I had formatted my CF cards immediately after importing, only to find the corruptions after.  Using Stellar Phoenix Photo Recovery to try to reimport manually the residual data from CF cards.  Will know if that works soon.

    From previous posts on this forum there are several things that can cause this type of corruption on import; faulty, CF cards, card reader, cable, and RAM.
    On my system it turned out to be faulty ram. Since changing my ram I have not experienced any further problems.

  • Lightroom 5 0 Bug XCF Files Prevent Import

    XCF files in a directory sometimes prevent Lr from importing other images in that directory.
    demo video
    http://youtu.be/QKa8WfGiRJI

    Works fine for me.
    Same processor as you, half the memory, single old and slow 128G SSD used only for LR cache, all other files on single normal hard drive. 
    First time into develop module takes 5 seconds, thereafter more or less instant. 
    The only operation which is slow is rendering full size previews (or images in Develop Module), which takes about 3 seconds for 36M pixel D800 raw images.  Rendiering 1:1 views is about 5-6 seconds.  I wish this were faster, but it's very usable. 
    I came back from a wedding 2-day shoot with around 1,700 D800 raws.  I reviewed them all and got a preview selection of over 100 done the next morning.  And 350 finished images in another day. 
    What really speeds my workflow is being able to sift, sort and compare a large number of images very quickly.  I couldn't work at the same speed in Bridge, which is slower to render developed previews, and doesn't have a seemlessly-integrated editor. 

  • I cannot get Lightroom to open, it gets to the first part then says, "Lightroom encountered and error when reading from its preview cache and needs to quit." Then "Lightroom will attempt to fix this problem the next time it launches". It doesn't fix anyth

    HELP!!!!!!!

    Using Explorer/Finder, locate your Lightroom catalog folder....inside that you will find a file called "yourcatalogname Previews.LRDATA", delete it (taking very great care that you do NOT delete the file ending in LRCAT) and restart Lightroom.

  • TS4036 my music won't play, it shows up on my library, but then says can't locate?

    I tunes lists my music in my library but when I try to play any of them get a notice saying can't locate?

    Hello Galavaly,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Best of luck,
    Mario

  • LR5 and xmp files on import

    Hi,
    I have the trial of LR5 and I trid now to geotag my pictures. To do so, I convert the .gpx file to xmp with geosetter. The XMP are created but when I import them into LR, the GPS position is not imported. But If I embed the GPS info into the raw files (cr2) the position is imported but I'd like to keep the raw file untouched so this is why I use the XMP.
    When I try to "update metadata" it's not working.
    So how can I make lightroom to read the xmp files on import ????
    Thanks.

    Strange
    Here is the content of an XMP file created by GeoSetter
    <?xpacket begin='' id='W5M0MpCehiHzreSzNTczkc9d'?>
    <x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='Image::ExifTool 9.28'>
    <rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
    <rdf:Description rdf:about=''
      xmlns:Iptc4xmpCore='http://iptc.org/std/Iptc4xmpCore/1.0/xmlns/'>
      <Iptc4xmpCore:CountryCode>BEL</Iptc4xmpCore:CountryCode>
      <Iptc4xmpCore:Location>Bioul</Iptc4xmpCore:Location>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:MicrosoftPhoto='http://ns.microsoft.com/photo/1.0'>
      <MicrosoftPhoto:LensModel>EF-S18-135mm f/3.5-5.6 IS</MicrosoftPhoto:LensModel>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:aux='http://ns.adobe.com/exif/1.0/aux/'>
      <aux:LensInfo>18/1 135/1 0/0 0/0</aux:LensInfo>
      <aux:OwnerName/>
      <aux:SerialNumber>2731431118</aux:SerialNumber>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:dc='http://purl.org/dc/elements/1.1/'>
      <dc:creator>
       <rdf:Seq>
        <rdf:li>Christian Dandoy</rdf:li>
       </rdf:Seq>
      </dc:creator>
      <dc:rights>
       <rdf:Alt>
        <rdf:li xml:lang='x-default'>(C)2013 Utilisation personelle</rdf:li>
       </rdf:Alt>
      </dc:rights>
      <dc:subject>
       <rdf:Bag>
        <rdf:li>Anhée Hautle-Wastia</rdf:li>
        <rdf:li>Belgique</rdf:li>
        <rdf:li>Bioul</rdf:li>
       </rdf:Bag>
      </dc:subject>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:exif='http://ns.adobe.com/exif/1.0/'>
      <exif:ApertureValue>80053/12102</exif:ApertureValue>
      <exif:ColorSpace>1</exif:ColorSpace>
      <exif:ComponentsConfiguration>
       <rdf:Seq>
        <rdf:li>1</rdf:li>
        <rdf:li>2</rdf:li>
        <rdf:li>3</rdf:li>
        <rdf:li>0</rdf:li>
       </rdf:Seq>
      </exif:ComponentsConfiguration>
      <exif:CustomRendered>0</exif:CustomRendered>
      <exif:DateTimeDigitized>2013-07-07T15:41:47+02:00</exif:DateTimeDigitized>
      <exif:DateTimeOriginal>2013-07-07T15:41:47+02:00</exif:DateTimeOriginal>
      <exif:ExifVersion>0230</exif:ExifVersion>
      <exif:ExposureBiasValue>0/1</exif:ExposureBiasValue>
      <exif:ExposureMode>0</exif:ExposureMode>
      <exif:ExposureProgram>2</exif:ExposureProgram>
      <exif:ExposureTime>1/320</exif:ExposureTime>
      <exif:FNumber>10/1</exif:FNumber>
      <exif:FlashpixVersion>0100</exif:FlashpixVersion>
      <exif:FocalLength>20/1</exif:FocalLength>
      <exif:FocalPlaneResolutionUnit>2</exif:FocalPlaneResolutionUnit>
      <exif:FocalPlaneXResolution>1036800/181</exif:FocalPlaneXResolution>
      <exif:FocalPlaneYResolution>691200/119</exif:FocalPlaneYResolution>
      <exif:GPSAltitude>17402/65</exif:GPSAltitude>
      <exif:GPSAltitudeRef>0</exif:GPSAltitudeRef>
      <exif:GPSLatitude>50,19.300140N</exif:GPSLatitude>
      <exif:GPSLongitude>4,48.363360E</exif:GPSLongitude>
      <exif:GPSMapDatum>WGS-84</exif:GPSMapDatum>
      <exif:GPSTimeStamp>2013-07-07T13:41:47Z</exif:GPSTimeStamp>
      <exif:GPSVersionID>2.2.0.0</exif:GPSVersionID>
      <exif:ISOSpeedRatings>
       <rdf:Seq>
        <rdf:li>400</rdf:li>
       </rdf:Seq>
      </exif:ISOSpeedRatings>
      <exif:MeteringMode>5</exif:MeteringMode>
      <exif:PixelXDimension>5184</exif:PixelXDimension>
      <exif:PixelYDimension>3456</exif:PixelYDimension>
      <exif:SceneCaptureType>0</exif:SceneCaptureType>
      <exif:ShutterSpeedValue>26574/3173</exif:ShutterSpeedValue>
      <exif:UserComment>
       <rdf:Alt>
        <rdf:li xml:lang='x-default'/>
       </rdf:Alt>
      </exif:UserComment>
      <exif:WhiteBalance>0</exif:WhiteBalance>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:photoshop='http://ns.adobe.com/photoshop/1.0/'>
      <photoshop:City>Anhée Hautle-Wastia</photoshop:City>
      <photoshop:Country>Belgique</photoshop:Country>
      <photoshop:DateCreated>2013-07-07T15:41:47+02:00</photoshop:DateCreated>
      <photoshop:State>Wallonie</photoshop:State>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:tiff='http://ns.adobe.com/tiff/1.0/'>
      <tiff:Artist>Christian Dandoy</tiff:Artist>
      <tiff:BitsPerSample>
       <rdf:Seq>
        <rdf:li>16</rdf:li>
        <rdf:li>16</rdf:li>
        <rdf:li>16</rdf:li>
        <rdf:li>8</rdf:li>
        <rdf:li>8</rdf:li>
        <rdf:li>8</rdf:li>
       </rdf:Seq>
      </tiff:BitsPerSample>
      <tiff:Compression>6</tiff:Compression>
      <tiff:Copyright>
       <rdf:Alt>
        <rdf:li xml:lang='x-default'>(C)2013 Utilisation personelle</rdf:li>
       </rdf:Alt>
      </tiff:Copyright>
      <tiff:ImageLength>3456</tiff:ImageLength>
      <tiff:ImageWidth>5184</tiff:ImageWidth>
      <tiff:Make>Canon</tiff:Make>
      <tiff:Model>Canon EOS 60D</tiff:Model>
      <tiff:Orientation>1</tiff:Orientation>
      <tiff:PhotometricInterpretation>2</tiff:PhotometricInterpretation>
      <tiff:PlanarConfiguration>1</tiff:PlanarConfiguration>
      <tiff:ResolutionUnit>2</tiff:ResolutionUnit>
      <tiff:SamplesPerPixel>3</tiff:SamplesPerPixel>
      <tiff:XResolution>72/1</tiff:XResolution>
      <tiff:YResolution>72/1</tiff:YResolution>
    </rdf:Description>
    <rdf:Description rdf:about=''
      xmlns:xmp='http://ns.adobe.com/xap/1.0/'>
      <xmp:CreateDate>2013-07-07T15:41:47.95</xmp:CreateDate>
      <xmp:ModifyDate>2013-07-07T15:41:47+02:00</xmp:ModifyDate>
    </rdf:Description>
    </rdf:RDF>
    </x:xmpmeta>
    <?xpacket end='w'?>
    And the picture displayed in Lightroom:

  • What happens to Raw files when importing Raw+JPG from camera to Lightroom Mobile on iPad? Only JPGs are showing up.

    Hey I am Brian, and I was wondering how Lightroom mobile works again as in when importing photos directly into iPad using the camera connection kit.? This is for IPad 2.  I . Like when importing raw files. now I just did a photo shoot. and I just uploaded them into lightroom 5 on desktop. the raw files are being pushed as smart priviews acroos ipad and iphone. its kinda cool seeing cr2 file showing up on lightroom mobile. when its coming from lightroom 5. but what about coming from camera to ipad.?
    I thought you can import a Raw plus jpeg into ipad and it shows up as a jpeg plus raw file. well its not doing that. shows up as just jpeg.
    cant wait for next update  of lighroom mobile.

    With this version of LR Mobile we not support the direct RAW import.
    You can vote for this feature request...Lightroom mobile: Ability to import raw files
    - Guido

  • Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open.  The it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

  • Show stopper: can't import tiff files with camera raw adjustments

    For RAW NEF files (coming from a Nikon D80), Aperture doesn't pick up adjustments I've made in ACR (Adobe Camera Raw) when I import them, even though the .xmp "sidecar" files are sitting there in the folder next to the them. Do I have to do something to get Aperture to pay attention to the .xmp files?
    Similarly, Aperture doesn't read ACR adjustments I've made to TIFF files. I've read on the web that adjustments made to TIFF files cannot be stored in "sidecar" xmp files. That's clearly true since I don't see the .xmp files sitting next to my tiff files in my image directory -- but my ACR adjustments are stored when I reload the TIFF files in ACR.
    In any case, Aperture doesn't seem to recognize either RAW files with sidecar .xmp info, or TIFF files that have ACR adjustments baked in.
    This is a show stopper for me and I'd love to use Aperture for its 'Faces' functionality. Does anyone know a fix for this issue?
    Thanks!
    Raphe

    Thanks for the reply, Kirby
    the kind of conversion you are talking about is likely a pipe dream.
    I gave it a quick look myself just now. the .lrcat file that lightroom has isn't binary & looks just like a huge list of adjustment data for entries in the database. For example, the curves on one of my images looks like this:
    ToneCurve = { 0,
    0,
    37,
    38,
    93,
    148,
    167,
    223,
    255,
    255 },
    So it wouldn't be difficult to write a .lrcat > .xmp exporter (basically going back from one Lightroom database to many .xmp files) or a batch .xmp > .lrcat exporter (going from many .xmp files to one Lightroom database).
    Looking at the contents of Aperture's .aplibrary package, there's an xml record of all files entered in the database, and I found what looks like image edits in the 'versions' folder -- but unfortunately the edits are stored in a binary format.
    Oh well, I guess this is why Aperture is a bit faster than Lightroom -- but will make it very difficult to write a converter to get edits into Aperture. & unless Apple adds edit info to their .xmp sidecar exporter (Export Masters) & includes a batch mode.. we wont be able to get info out of Aperture. So, for the moment, this apparent lack of an open format keeps Aperture from being a professional tool imho, compare to Lightroom.
    ..but for me there's no reason to switch from ACR to Lightroom because there's no facial recognition, and the curve editing utility is better in ACR.
    Thanks for the comments, David.
    I'll be sticking with ACR/Bridge for now -- I'd rather not split my library -- & hope that Lightroom adds some facial recognition functionality
    Besides this, Aperture seems like a really nice product.
    Cheers,
    Raphe

  • Lightroom 4 missing RAW files on import

    After upgrading from lightroom 3 I'm having a problem importing my raw files. Most of the time Lightoom 4 will only recognize some of my .CR2 files and only the JPGS of the rest of them. The weird thing is that it's not my card reader. When I access the card through finder I can see all of my files. It's only in Lightroom that I can't access all the files.
    It's very random about which CR2s will and will not be recognized at any give time. Sometimes it's one day only of a shoot, sometimes it's completely random photos spread across different days. I always shoot RAW+JPEG on a Canon 60D. As of now I just keep plugging and unplugging my card until all the RAWs show up for an import but this is annoying and time consuming. Anybody know what's going on?

    Suggest you try the 4.1RC (available here: http://labs.adobe.com/downloads/lightroom4-1.html) as there were some bugs in this area which were fixed in the RC.

  • Lightroom 4 corrupting Nikon D800 RAW files on import

    Has anyone experienced Lightroom 4 corrupting Nikon D800 RAW files on import?

    How do you know they aren’t corrupted before you import, or the old one wasn’t already corrupted and you just regenerated the preview and could then see the corruption where what you saw, before was from the preview cache and not the current image?
    Is the corruption a problem with the Previews or does LR actually choke on the file and say it is unreadable or show you a gray thumbnail or pixilation starts halfway down the photo.
    Can you prove the files were intact coming off the card and only are corrupted after importing into LR?  Can you get to the originals on the card, still?

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Maybe you are looking for

  • Captivate 8 Drag drop - Many to Many as correct answers? via type.

    Captivate 8 Drag drop - Many to Many as correct answers? i.e. via type grouping of drag image objects I've hit a brick wall. I've been testing this drag drop quiz feature via the Interaction Wizard and I've found that drag items assigned to the same

  • Content alignment problem

    Alignment on all web pages is off, sign in boxes are gone, calenders overlap, graphics gone

  • Opening apps on Blackberry Playbook

    Hi.  First time posting as I just bought the Blackberry Playbook.  Love it so far. However, I can't seem to open the apps I have downloaded.   Have I forgotten a step? I'd appreciate any help in a step by step form.  (that way I can tell what I'm doi

  • Extension Mobility: Automatic logout

    Dear Team, Hi Team, Our customer requirement is that user should log out at 4:00PM even they are login at any time. Can we achieve this. I know we set the maximum login time but we can not schedule. Is there any way, by XML application etc. Kindly ad

  • Why when i download game to ipad, my iphone will also get that game

    How to stop this matter in my iphone? Please teach me how to stop receiving games or other when i download app store with my ipad, my iphone will not receive the same games or others thing on it. Regards, Karen 96991939