Lightroom 4 .2 update

Hi I am having trouble updating lightroom 4.1 to 4.2 on my Mac, there doesn't seem to be a patch, I can't upgrade in Lightroom, it has been suggested that you need to uninstal 4.1 and instal a complete version of 4.2 is this correct?
Richard

Hi Panic over ! I have now successfully updated Lightroom to 4.2.
Richard

Similar Messages

I use Lightroom 5 (update)on my PC. Now I want to use Lightroom also on my notebook but it has no CD-drive. Can you help me - Wilhelm Habermalz

I use Lightroom 5 (update)on my PC. Now I want to use Lightroom also on my notebook but it has no CD-drive. Who can help me - Wilhelm Habermalz

The easiest way would be to download the trial version, and then use your existing serial number to activate. Or, if you have already downloaded the update to use to update your original installation, you could copy the file that you downloaded to a flash drive and use it on your other computer.

My lightroom has updated to 5.5 and I now can't use the Develop module.

My lightroom has updated to 5.5 and I now get the message "Develop module is disabled -please renew your membershipto reactivate the Develop module". My membership is ongoing so how do I resolve?

Adobe made a help page for this problem because so many people have it:
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

After Lightroom CC update, PS & Bridge fail to update and get error U43M1D204. Retried for two days still same error.

After installing the lightroom CC update, PS and Bridge reported they had updates. When trying to update I get the error U43M1D204 and it fails. Retried for two days now and still cannot get it to work. Tried removing PS and Bridge but there is no uninstall or reinstall options.

UPDATE: I managed to get both uninstalled and they re-installed ok. They reported installing ok but required a patch and that failed. So back to the same issue, I cannot patch these two applications.
Forgot to add details:
Macbook Pro 13" (Late 2014)
Up to date Mac OS X Yosemite
Up to date Creative Cloud

When will Lightroom be updated to accommodate Canon 6d RAW files?

When will Lightroom be updated to accommodate Canon 6d RAW files?

Its not supported in the Latest version of Lightroom 4.3 Release Candidate or ACR 7.3 RC which expires at the end of Jan 2013 I believe.
Since the 6D is a high end and likely a popular camera model it is my expectiation that it will be supported when the final release of LR 4.3 / ACR7.3 is issued.
I do not know just my opinion.

Lightroom cc updated new features don't show up such as face recognition

I need help! Lightroom cc updated new features don't show up such as face recognition. What should I do?
Thanks,

Have you installed the Lightroom CC program from the creative cloud desktop manager? If you are certain you are running Lightroom CC then face recognition will be on the toolbar in the library module. If you don't see the toolbar then press the letter T.

Lightroom 6 update link broken?

Trying to download Lightroom 6 update as instructed by the store manager email.
Clicking on the link returns an
413
Header Length too Large
error (consistently across Chrome and Safari). Where can I download my software?
Thanks,
Sebastian

Hi Ned,
I assume this is just a general suggestion on your end rather than a known fix?
As I mentioned, this error appears consistently across various browsers and yes, of course I've tried the cookies and I'm logged in (though I'm not sure how this would affect header size?).
Still getting the same error...

Lightroom 6 update sans connexion

Bonsoir,
J'ai acheté Lightroom 6 update mais je ne peux l'utiliser sans connexion à Adobe.
Rien n'est spécifié lors de la commande c'est un update de Lightroom 5 et non une version CC.
Merci pour votre aide.
J'ai essayé de contacté le support Adobe mais Lightroon n'a pas de support technique.

Hi Ned,
I assume this is just a general suggestion on your end rather than a known fix?
As I mentioned, this error appears consistently across various browsers and yes, of course I've tried the cookies and I'm logged in (though I'm not sure how this would affect header size?).
Still getting the same error...

I installed the Lightroom CC update. I cannot open it. What is the problem?

I installed the Lightroom CC update. Now I cannot open the program. Any suggestions?

I'm having the same issue.
I had Lightroom 5 installed via CC, and working fine on a Windows 7 desktop.
I opened CC and saw the Lightroom CC upgrade.
I installed Lightroom CC,..but when I try to open it, it dumps and gives me the following error:
Adobe Photoshop Lightroom has stopped working
If I look at the problem details I see:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    lightroom.exe
Application Version:    6.0.0.10
Application Timestamp:    5523190c
Fault Module Name:    libcef.dll
Fault Module Version:    3.1750.1805.0
Fault Module Timestamp:    53eb9d68
Exception Code:    c000001d
Exception Offset:    00000000020f5fa3
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    1849
Additional Information 2:    1849c65267ce2967d89f315e1c3c4b82
Additional Information 3:    95b7
Additional Information 4:    95b7e9ed49fb3657956fc9b27015606a
So what's up with this,...I'm at a dead stand still.
I have tried rebooting the desktop.
Signing out of CC and then signing back in,..to no avail.

When I try to download Lightroom 6 update the web screen says it's downloading but nothing happens. Anyone else have this issue?

When I try to download Lightroom 6 update the web screen says it's downloading but nothing happens. Anyone else have this issue?

Disasble the computer's security software during the download and update.

Problem moving files in Lightroom 5 UPDATED AGAIN

Hello,
I recently changed from LR3 to 5.2 and have a problem I hope someone can help with.
I have a lot of pictures taken on a trip and have created somenew folders within the original folder to place them into categories. When I drag files from the main folder into one of the new ones Lightroom creates a new file in the new folder , but also leaves one in the original one. If I then delete the file from the original folder LR deletes it from the new one as well.
I have checked the preferences and catalog settings and read the instruction PDF but can't find anything to help.
I should point out that the catalog was created in LR3 and imported into LR5 and has behaved fine in all other respects.
Any assistance would be greatly appreciated.
Graham
UPDATE: I've just discovered that it is only that particular original folder that's affected. I am able to move files around into and out of other mother folders OK. Perhaps the folder I'm having thr problem with has been corrupted in some way?
Message was edited by: Mahargo
Further Update: If I open Adobe Bridge I can move the files around as I please, so I guess I can use this as a workaround. (Couldn't do that in Windows Explorer as you can't view DNG files there). I'd still be grateful if anyone can shed light on this. I'll investigate further tomorrow and post again if I find an answer.
Message was twice edited by: Mahargo

I'm also having an issue with degraded exports. Here is a screencap of the RAW file
Here's a screen capture of the exported image after I've re-imported it into lightroom. This is a JPG with sRGB and 100% quality. It's resized on export with 3264pixel long edge at 240dpi.
Here's a screen capture of the same JPG viewed in Windows Photo Viewer, but it looks the same in web browsers too.
What changed? Why is there so much dark black color running into the photo? It's like a printer is printing too much black. I want to export it so that it looks the same in all other viewers as it does in photoshop.

Adobe Photoshop Lightroom 3 updates won't work? Also tried DNG converter but will not work either.

Does anyone know how to get the Adobe Photoshop Lightroom 3 to update so you can use it? I can't process raw files with my new Canon SD Mark 3.
It looks like they stopped doing updates.
Next I tried the DNG converter but it was useless. It could not find any of my photos.
SOS - I needed to complete a job with this last night and their site won't help and they finally respond by saying we will get back to you in a few days.

That camera requires at least Lightroom 4.1. There is no update for Lightroom 3 that will support the files from that camera. I'm guessing that you're having the typical problem that new users at the DNG converter encounter. The converter prompts for the *FOLDER*. If you open that folder then the DNG converter will tell you there are no files to convert. Just choose the folder. I know, it's really stupid prompt and method. But it is what it is.

Did Lightroom software update and now camera won't tether

I have been using my Canon 5D Mark II tethered to Lightroom 4 successfully for quite some time. Last week I downloaded the software update and now the camera will not tether. I have tried two camera bodies and neither work. Both cameras will tether with Lightroom on a different computer (that didn't get the update). So, it's the software. Help!

Hi
try a safe boot - holding down the Shift key until it starts up -
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
More info on what a Safe Boot does at http://support.apple.com/kb/ht1564
also follow the rest of the troubleshooting guide at http://support.apple.com/kb/TS2570

Why does Lightroom not update all my previews after a batch change?

Hi!
I imported more 2,000 pictures. Then I did one batch change (adjusting the curve (tonality) by Lightroom).
But it looks like, only on the page, I actually see, the previews are updated.
If go to the next page of 24 pictures. At first I see the old preview. Then the CPU and hard drive activity is increasing and picture by picture the preview is updated. So I've to wait 15 seconds, until I can decide, if the settings of the pictures are a good start or not. And then I've to page again and wait 15 seconds
I expect, that Lightroom does it:
in background
in parallel and not only one picture by picture (15 seconds are cause by sequencially processing; I've an Intel i7 with 4 cores and 3.6 GHz, it's not the slowest machine, but Lightroom only use up to 25% of my whole CPU resources :-( )
Sorry, but I do not understand, how I should be able to handle a mass of pictures, if I have to page and wait always.
Is there any magic shurtcut, command, setting, to enforce such an auto update?
Thanks a lot!

Dunno whether this would offer sufficient improvement or not:
It doesn't automate preview generation, but does give a button (2 actually) for quick-building of previews.
OttoMate
PS - Adobe did provide a function in Lr5.2 SDK for building previews, unfortunately the fine print taketh away too much of what the big print giveth (e.g. doesn't work in develop module), so not viable for auto-preview generation, yet.
~R.

Having troubles in Photoshop and Lightroom after update

I am working on a PC, with Windows 7-64 bit and Adobe Creative Cloud versions of Lightroom and Photoshop. Everything is up to date both operating system and Adobe.
I just noticed the following problems this weekend.
1. I cannot import into Lightroom. When I insert a CF card into my reader Lightroom opens as it should but I am unable to import - there is no import button or menu selection to do so.
2. I cannot send any files to be opened in Photoshop. Photoshop does not see the file to be opened and a dialog opens asking what file to open. All that I can see are icons for the Canon CR2 files - even in Bridge.
3. In Photoshop I cannot open any of my CR2 files in ACR, it is not seen as a valid file. I can, however open PSD files.
All of my problems occurred after the latest Creative Cloud update to the Adobe Content Viewer.
What can I do to regain my functionality? Any help will be appreciated.
Thanks for your help.

I ran the CC Cleaner tool but there are failed records. The instructions say I should contact customer service if that happens.
Exactly how/where do I do that?
I need to get this all fixed so I can get back to work! Sorry for thee rant, its been a rough week...
Thank you for your help.

Lightroom 6 update issue

I have Lightroom 5 on my iMac and have just purchased the update to LR6.
The email that confirms my purchase informs me that I've purchased Adobe Photoshop Lightroom 6 (Mac/Win,English) and gives me a serial number.
However, when I follow the download link I'm offered three versions of Lightroom, Mac/Win English, Windows Multiple Languages and Mac Multiple Languages.
The Mac/Win English download has my serial number against it the the next column states that the download is "not applicable".
The other two show no serial number and offer a download link. In desperation I tried the Mac Multiple Languages link and this downloaded, but it will not install, stating that I don't have an applicable product on my Mac to upgrade from.
I'm stuck.
How do I download and install the product that Adobe tell me I've purchased?
Brian

I finally found the solution to the problem I was having. I don't know if this will help anyone, but I'll put it out there anyway. As I said in my previous comment, in previous upgrades I was having problems with Lightroom not launching if I performed the upgrade from within the CC App Manager and Adobe had provided an alternate link to download the upgraded version separatly. The result was (because I didn't clean up after these upgrades) was that I had multiple versions of Lightroom on my system (Windows 7): Ver 5.4 and 5.7. In the start menu, these displayed as separate lanuch icons including the version in the txt.
Yesterday, when I decided to take the chance and upgraded Lightroom from within the CC App Manager, it performed the upgrade, said it was up to date, but I did not notice that it created another version of Lightroom WITHOUT any of the version numbers in the title. This version was buried down in the "All Programs" folder of the Windows 7 start menu.
TODAY, still a little frustrated, I opened the CC App Manager, It still said up to date. I launched Lightroom (from the old 5.7 icon, or rather a shortcut to one of my existing lcats which was tied to this old version) I went to the "Check for Updates" and it said new software was available and showed the new features available in ver 6. I'm not sure why it didn't show this info yesterday but there it was. I clicked the Download button which took me to the lightroom page on Adobe. There was a download button near the top right. It was there yesterday, but all it did was download a CC App Manager install file. So, I went ahead and did the install again, but it just went directly to opening the App Manager. I signed out of the App Manager, and signed back in....still no apparent change.
THEN, AND HERE'S HOW I FOUND OUT THE UPGRADE HAD ACTUALLY BEEN INSTALLED: I ACCIDENTALLY clicked on the Lightroom Icon itself in the CC App Manager. To my surprise, it launched the window showing a list of my catalogs asking me which one I wanted to open. I didn't even realize I had clicked the icon. I chose one of my older, less valued catalogs to be opened...viola! It said I needed to upgrade the catalog. Wow! I cancelled out because I didn't want to upgrade without understanding what was going on. I tried to launch that catalog as I would usually do and it opened right away in version 5.7.....what the hell?!?! Then I had the thought that maybe I had accidentally clicked that icon, so I manually made a backup copy of that catalog and it's previews folder in Explorer. I clicked directly on the Lightroom icon in the CC App Manager. It opened the "choose catalog" window again. I choose the catalog, upgraded it and it opened the upgraded catalog IN VERSION 6. Wow!!
So, being Windows, not Mac, I had to associate the lrcat file type with the NEW Lightroom.exe file, I've upgraded the remaining catalogs and I'm good to go. So, apparently, my previous frustration comment about Adobe maybe fixing the upgrade issue is no longer a valid comment....they have fixed that problem, for my situation at least.
Like I said I don't know if this helps anyone else, but I thought I'd put it out there.
Bill

Lightroom 4 .2 update

Similar Messages

Maybe you are looking for