Lightroom 4.3 Camera Profiles

Is is possible to delete added camera profiles from the Camera Calibration Panel in lightroom4.3? Was doing some practice shots and would like to get rid of some that I created using a colorchecker.

The profiles need to be deleted manualy. X-rite provide the following info as to where they can be found http://xritephoto.com/ph_product_overview.aspx?ID=1257&Action=Support&SupportID=5282 Also, note the reference to the DNG ProfileManager tool; it might be worth downloading a copy.

Similar Messages

Lightroom 2 and Camera Profiles for the Nikon D50

Hi,
I've installed Lightroom v2 and the new Camera Profiles, as per the instructions and various postings I should now see my camera name appear in the Profile section of Camera Calibration.
The default profile is ACR 4.4 and when I drop the list down I see the usual settings and Camera D2X Mode 1 Beta 1, Mode 2, etc. but no reference to Nikon D50?
The Metadata on my images is set to a Make of NIKON CORPORATION and a Model of NIKON D50.
Looking in C:\programdata\adobe\CameraRaw\CameraProfiles\ I can see there is a D50 profile but Lightroom v2 isn't showing it.
Any ideas?
Thanks

Explained in http://www.adobeforums.com/webx/.59b60173/37?14@@ (see responses by Thomas Knoll)

Lightroom 4.3 camera profiles. V3 beta no more available!

After fresh installation of Lightroom 4.3, I am not able to install old nikon camera profiles v3 beta, therefore my old pictures are darker by -0,5EV. Copied profiles to the proper directory and NOTHING!

Found the answer:
http://forums.adobe.com/thread/1116231?tstart=0

Install lightroom 5.6 camera profile windows 8

How do I install the new Nikon D810 Camera profile in Lightroom 5.6 on Windows 8?

http://helpx.adobe.com/lightroom/kb/camera-standard-profile-displays-posterized.html

LIghtroom 5.6 camera profile for Canon G 1 X II

I recently bought the Canon G 1 X II. When I imported my first images to Lightroom I was surprised that at first I was offered a Profile G 1 X (my former camera) and later NONE. When going through the list of available profiles I found that it was very old. (S 100) what can I do?

The PS Camera Raw plug-in will indicate when a built-in lens profile has been applied, and the G1X.2 has one:
You can also test for one by opening a raw image in a raw converter, like RawTherapee, that doesn't have lens profile corrections.
Here is what the above G1X.2 image would look like without any built-in profile being applied:

ACR 5.7 can see camera profiles in Bridge CS4 but not in Lightroom 2.7

When utilizing ACR5.7 through Bridge CS4 - the cameral profiles are easily applied for my .NEF files (Nikon D300) but when I am in Lightroom 2.7 the camera profiles are not available unless I convert the nef to DNG. I have tried to search the web and these forums but I am unable to locate the answer to my problem:
Why can't I see the camera profiles in Lightroom for my nef files when I can see them through Bridge.. (both running ACR 5.7)
Windows XP xp3
Lightroom 2.7
Bridge CS4
ACR 5.7
Nikon D300 profiles
Thanks for the help.
NGG

For those who might be reading this and having "odd" problems .. my solution was to delete my preferences file.
http://lightroomers.com/replacing-the-lightroom-preference-file/745/
This solved several odd issues I was seeing in my lightroom including the camera profiles..

How to Search Lightroom Library for Photos Using Specific Camera Profiles?

Photos processed using Lightroom 5.6 camera profiles for the Nikon D810 displayed posterized colors. A temporary workaround was published by Adobe, as described here:
Nikon D810 camera profiles display posterized colors
Lightroom 5.7 resolved the issue, but I still have a lot of photos that were processed with the "v2 beta" camera profiles provided by Adobe, and those profiles still remain on my computer. I'd like to find all the photos in my Library that were processed using a v2 beta camera profile, update them to the respective new 5.7 profiles, then remove the v2 beta profiles from my computer so they no longer show as options in the Lightroom Camera Calibration pane.
How can I search my Library to find all the photos that used one of the beta Camera Profiles?
Thanks.

The Data Explorer, DevMeta, and Any Filter plugins can search for specific camera profiles. (You can't do it with LR smart collections or filters.)

New camera profile not "appearing" in ACR, but does in Lightroom

I recently created a camera profile for a Nikon D200, using an X-Rite Colorchecker chart photo and the Chart feature in the DNG Editor. I exported the camera profile. When I go to the Calibration tab in ACR 5.5, the new profile does not appear in the drop down list with the other camera profiles. However, when I go to the Develop module in Lightroom 2.5, the new profile does appear in the drop down list there.
I am running Windows 7. Snooping around my root drive I find that if I look within the Users\User Name\AppData\Roaming\Adobe\CameraRaw\CameraProfiles directory (referenced in the Fraser and Schewe CS4 Camera Raw book as the Vista location for the profiles) I can find no camera profiles and when I place the new profile there it still does not appear in ACR. When I look in ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D200 directory I can see the regular set of camera profiles for the camera, as well as the one I created, but as I previously stated, the newly created profile does not appear in the ACR list.
A side note - I did some experimentation with camera profile names. I added "XX" to the end of the Nikon Vivid profile name (not the extension), and then that profile no longer appears in the ACR list of profiles. I removed the extra letters and then the profile reappears in the ACR list of profiles. Seemed odd behavior to me. I also noticed that the profile I created with DNG Editor is noticeably smaller than the others provided by Adobe (28K compared to 110k).
Hope someone has a suggestion for me.

Your reminder about both Photoshop (main) and Bridge needing to be shut down for changes to take effect reminded me that I had Bridge set to "auto-start at log-in". So I checked and it was still running (shown with the other hidden icons). When I "shut it down" from the UI I had thought it was fully terminated. So I completely shut Bridge down, restarted, and the new profile now appears.
Thanks for the reminder/pointer in the right direction.

Camera Profile options suddenly missing in Lightroom...

Okay... so I noticed yesterday that (for some reason) my camera calibration profile options have disappeared, and my only option is "Adobe Standard". I used to have all the others (camera standard, camera standard 2, adobe standard 2, ACR, etc), but they have vanished.
I'm running Windows 7 32bit.
I thought maybe it was just Lightroom 3.5, so I un-installed and re-installed... no luck.
I un-installed 3.5 and re-installed 3.4.1.. no luck.
The camera profiles are in the proper directory (based on other forum posts I've found)... no luck.
I've tried removing the camera profiles from the directory and re-installing... no luck.
Not sure where they went, or what happened, or how I can get them back. Colors just aren't the same without them
Any ideas? I searched for hours on different forums and support sites, with no avail... Am I missing something? Is there another software besides Lightroom that needs to be installed? I'm out of ideas.
Cheers.

The list of profiles displayed is dependent on the camera used to shoot the image. Typically, cameras from Nikon, Canon and some Pentax will have a range of profiles whereas others vendors (e.g. Sony, Panasonic and Olympus) will only have Adobe Standard. I suggest that you check which camera model is showing fewer profiles than you expect and report back. Someone will then be able to tell you whether it's got a a full or limited range of profiles.

Lightroom 5.7 Not Showing Camera Profiles from DNG File

Hello,
I just installed Adobe DNG Converter 9.0 and converted some Nikon D7200 fles to DNG for import into Lightroom 5.7. This works fine except for the Camera Specific profiles not showing up. Only Adobe Standard shows up.
When I open the same DNG file in Adobe Camera Raw in Photoshop CS6, [it] properly shows all the camera specific profiles for the D7200. What am I doing wrong?
Here is what the develop module Camera Profile drop down menu looks like in LR 5.7
And in Photoshop CS6 Adobe Camera RAW ( ACR ) 8.7.1.311
Thanks for your insight.

gonzalu, the reason is because the profiles are installed separately for Camera Raw vs Lightroom.
If you're using Lr 5.x, then to get the extra D7200 profiles visible in Lr, you'll need to manually copy/install them. Try looking here:
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D7200
and copy the contents of that folder to here:
C:\Users\USERNAME\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
(where you should substitute your actual username, above).
Then restart Lr and the profiles should be visible now.
(You don't need to do this step if you're running Lr CC, because the new profiles are included with that installation.)

Lightroom 4.3 Update and Camera Profiles.

Hello there!
First let me start by mentioning that im running Lightroom on a Mac OS X (10.8.2).
I was running v4.2 for a while until the v4.3 update came out about a week and a half ago.
I updated to v4.3 and everything was working fine until I noticed something today.
Im having problems with Camera Profiles. I do run the latest 2012 process.
The problem to be exact is when I open catalogs that were made with v4.2
I scroll down to Camera Profiles and here is what i get.
I have presets that automatically correspond to the "film" profiles below.
But ever since the upgrade it automatically goes to ACR 4.6 instead of the "film" profile.
I know for a fact that with v4.2 I only had these profiles:
Adobe Standard
Camera Landscape
Camera Neutral
Camera Portrait
Camera Standard
Camera Vivid
with the addition of the "film" profiles.
After updating, thats what I get when opening v4.2 catalogs.
Heres the weird part.
When i create a v4.3 catalog, all of those Camera Profiles disappear.
leaving only these:
Adobe Standard
Camera Landscape
Camera Neutral
Camera Portrait
Camera Standard
Camera Vivid
and nothing else.
When I looked at the Camera Profile folder, the ones I added are there but doesnt show up in Lightroom.
Mac HD > Library > Application Support > Adobe > CameraRaw > CameraProfiles
Is this a bug or is there a fix for this? Does v4.3 read Camera Profiles from another location?
If so please help!

I would suggest a two-step process:
1) The problem could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
Re-installing Lr, or upgrading Lr does not replace the Preference File since it is designed to stay intact during upgrades.
See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/
2) If that does not help: Un-install Lr and delete the downloaded Lr 4.3 file. The file might have become damaged during download.
Then download it again and install.

Can't install Lightroom 4 Camera Profiles in OSX 10.8.3

The way I tried installing is by dropping the profile folder into the following paths:
One path is: HD/Library/Application Support/Adobe/CameraRaw/CameraProfiles/
Another Path: /Applications/Adobe Photoshop Lightroom 4.app/Contents/Resources/CameraProfiles/
But the profiles do not appear in the Developer Module - Camera Calibration place.
Anyone have an idea how to properly install camera profiles on Mac runnins OSX 10.8.3
Thanks
Ben

Ok I got it,
By default OSX Mountain Lion 10.8.3 hides the Library Folder in users/username/ folder. What you need to do is unhide by launching Applications/Utilities/Terminal and pasting this chflags nohidden /Users/[username]/Library/ replace [username] with your computer username before pasting.
Once you execute the script you will see the Library folder and be able to place the profiles there, and it will work.

Camera Profile in Lightroom (X20)

Hi, I'm just beginning with a fujifilm X20 camera and .raf files.
I'm trying Lightroom 5.0 and still not sure if I should use Photoshop instead, here is why :
I tryied to found my camera profile, and it's not in lightroom, found X100 not X20.
I tried by the adobe lens profile downloader, I found 5 profiles for the X10, none for the X10.
Googling about that, I found out that the X20 is supported by Camera Raw, but I can't see how I could get that without Photoshop.
So my question is : what should I do :
- don't care about lens correction ?
- do care and chose one of the five available X10 profiles (but how to chose.. between them)
- switch to Photoshop + Camera Raw wich is supposed to support the X20
Thanks for any help

You may be confusing two concepts.
RAW file support for you camera means that LR will open the RAW file. LR has the Adobe ACR (Adobe Camera Raw) system built in and you don't see it. Photoshop uses the same ACR system, but you do see it as a separate function.
There are two ways you can see if your camera is supported by Lightroom or ACR. One is to find the list of cameras. The other is to see if it works.
The second concept is lens profiles. For fixed lens cameras like yours, the lens corrections are built into the data in the RAW file the camera makes. Unless you have a DSLR with multiple lenses, you can leave the "Lens Corrections" disabled or set to "Default".

Image Change When Transferred from Lightroom to PS (?Camera Profile)

I am having difficulty that I think is related to Camera RAW that I hope I can get some help with.
I updated to v7.2 today, but I think the problem started today before the update. I get the image looking great in Lightroom and then either send to Edit in PS or to Open as Smart Object in PS (it doesn't matter, same results) and the image looks awful. If I open the smart object in PS it opens in Camera RAW and when I look at all the Camera RAW settings they are all exactly the same as the Lightroom 4.2 settings until I get down to the camera calibration settings. In Lightroom it is set to Process 2012 with Adobe Standard as the profile. In Camera RAW it is Process 2012 but the profile is simply listed as 'Matrix' with no other choices available in the drop down. In Lightroom, Adobe Standard and all the camera profiles are available for what I am shooting with, a Canon 5D MKII which I have used for years. As recently as a day or two ago I did not have this problem (though I never looked to see what the Camera Raw profile was when it was coming over to PS correctly), though I suspect it may be the source of the problem since all the other settings are identical
Any help would be very appreciated as I can no longer work with images until this is corrected.
Thanks very much,
Howard

Perhaps this is a clue to the problem? If I go to Program Data>Adobe>Camera RAW> Camera Profiles > there is a folder called Camera and another Adobe Standard. Within the Adobe Standard Folder are Adobe Standard files for multiple cameras including the Canon 5D MKIII, but inexplicably there is not one for the MKII. Likewise, the Camera folder contains folders labeled with different cameras. There is a folder for the Canon 5D MKIII that contains the profiles (neutral, landscape etc) but there is NO folder for the 5d MKII. What gives here? Is this the problem? If so how does one fix it?
Howard

Camera Profiles in Lightroom 2

Dear all,
I'm stuck with applying any other than the embedded camera profile to my pictures. Did install Adobe's camera profiles, but they are not coming up under Lightroom->Calibration->Profile, which seem to have an empty list.
Any hint, thx in advance

You need to open a raw file, not a TIFF or JPEG.

Lightroom 4.3 Camera Profiles

Similar Messages

Maybe you are looking for