Lightroom 4.3 on a Mac Pro not working under my user name

I have recently installed Lightroom 4.3 on a MacPro, Mountain Lion, 8GB RAM, environment. I kept getting the following error when changing to the "Slideshow" module: 'An error occurred when attempting to change modules'. I followed the advice given here and the application now works well under a new user name. However, I don't want to have to log in under this name everytime I want to use Lightroom. How can I find out what's wrong with my own user profile? Any help would be appreciated.
Cheers
John

It's not just you John - there's an active bug, appears to be affecting people with a second monitor attached http://feedback.photoshop.com/photoshop_family/topics/lightroom_4_3_slideshow_bug

Similar Messages

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Audio Output from Mac Pro not working in XP

I'm trying to make the audio line output of the Mac Pro work in XP. the only sound comes from the motherboard or headphones in front of the computer.
Under audio devices say "realtech HD audio device" This is the Apple mac pro?
How do I turn the audio output on?

I think I resolved this! I had the same issues you have been having for a few months. I am actually running Vista. Here is what I did...
1. While booted to Windows I uninstalled boot camp
2. Re-installed boot camp from Leopard DVD
3. Installed boot camp update 2.1 (downloaded from Apple support, i know this is for XP only, but I updated anyway.)
4. Downloaded the realtek drivers (high definition audio codecs) from http://www.realtek.com.tw/downloads/
5. DO NOT use the Realtek installer to install the drivers...instead extract the contents to a folder.
6. Go to the device manager, locate the High Definition Audio device and updated the drivers from here (point to the folder where you extracted the drivers).
I now have sound out of the rear jack!! Hope this help someone
Regards,
Blaine

Bought internal bluetooth card in 5 year old Mac Pro; not working right?

Bought internal bluetooth adaptor for my 5 year old Mac Pro. It searches for bluetooth devices, but dosn't find bluetooth devices; any advice?
I secured it interlanly with the two screws supplied. Had replacement card sent out, but same thing?
Using it with Apple Magic Mouse. I know mouse works as I tried it on friends new iMac.
Using latest Snow Leopard, and have seperate boot drive with Lion. Dosn't work on either.
Bluetooth ikon shoes in bar at top, and all software functions normally, just dosn't detect anything?
Thanks.

Try smc and pram reset.

Duel displays Mac pro not working properly

I have a MacPro Tower that I bought 4 years ago that was running OS 10.5.x. I *just* finally got around to upgrading the OS (I've had Snow Leopard discs for over a year and never installed them), so that's what I upgraded to. I have two displays connected to the system: a 23" Apple Display and a 20" Acer.
I was running with both displays before the upgrade just fine, and after initially upgrading to 10.6.3 my mouse was easily going back and forth between the two screens, but just ran the upgrade to 10.6.8 and now my mouse is "stuck" in the Acer screen and won't move over to my Apple Display - and the Apple Display is the one that has all the open windows and menus.
I tried unplugging and replugging in my displays and restarting the problem remains.
Any ideas for a solution?

For: "The battery does not appear to be charging properly"
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If resetting SMC does not help, MacBook Pro should be taken to the Apple store for service.
Best.

I'm getting an error trying to re-install Lightroom 5 on my new Mac Pro. The old Mac Pro died. When i try to enter my Serial

hello. I had Lightroom 5 on my old Mac Pro. Worked great. The Mac PRo died. I bought a new Mac Pro and am trying to re-load Lightroom but it won't accept my Serial number. Please help. Thanks.

You can look here
Adobe - Lightroom : For Macintosh

I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011

Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx

I have a new mac book pro and wan't to install my version of lightroom 5 from my old pc to the new one.
How can i do that? Can't find it here on the site? Thx
[email protected]

Hallo, I installed the program as you said. Everything ok.
When i have to give my serialnummer, it is not accepted. Code is not valid he said
1160-4008-7475-7547-5706-0812
Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
www.adobe.com
Hit the Download link at the bottom the page.
Hit Lightroom
Hit Free Trial
When you are done downloading, launch, and enter your serial number from your previous installation.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Screen dims randomly with Mac Pro - NOT a Macbook

After upgrading to Mountain Lion, my screen will dim randomly when watching movies or YouTube. This is on my early 2008 Mac Pro - not a Macbook Pro which seems to have this problem commonly. I've searched and searched and lots of people have this problem with a Macbook Pro (battery saving feature or something) but there are no options to defeat screen dimming that I can find for a Mac Pro!! Mountain Lion just keeps getting worse and worse!
HelP!

Hello, thanks for taking the time to help me out!
This is a 2008 MacPro (2x2.8 GHz Quad-Core Intel Xeon) running Mountain Lion OSX 10.8.4.
I am running two monitors: a HannsG HH281 and a Hewlett PAckard HP w2408h.
When this first was happening back in March 2013, I thought it had something to do with the ambient light sensor on the HP (the HannG doesnt have a light sensor), but it also might have has something to do with the dynamic contrast on the HannsG. I had shut those features off, and I actually hadn't had this problem in a while and there has been a few Mountain Lion updates since then.
I just tried to reproduce this by turning on/off the dynamic contrast on the Hanns G - did not get the problem
again. I also just turned the ambient light sensor on for the HP, and again, the problem did not occur.
So it is hard to say if the problem is gone away or not or if it just is not showing itself at the time being?
Here is the graphics card and display info from the System Profiler:
ATI Radeon HD 2600 XT:
Chipset Model:          ATI Radeon HD 2600
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          ATI (0x1002)
Device ID:          0x9588
Revision ID:          0x0000
ROM Revision:          113-B1480A-252
EFI Driver Version:          01.00.252
Displays:
HH281:
Resolution:          1920 x 1200 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          939LK3NA01178
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Television:          Yes
HP w2408:
Resolution:          1920 x 1200 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          3CQ8410GZF
Mirror:          Off
Online:          Yes
Rotation:          Supported
Television:          Yes

Canon file RAW CR2 and mac book pro not working ...?

Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
Bandar

Dear all
is there any solution for that ?

Why would I get a Sudden Motion Sensor error on a Mac Pro (not a laptop)??

Get this error all the time since upgrading to Logic 9.1.4. Thing is, I have a Mac Pro, not a laptop.
Apple sends me to this page:
http://support.apple.com/kb/HT1934
Should I disable sudden motion sensor? Seems silly. I am recording woth headphones, there's no movement from the computer. And again, didn't have this error for 3 years and suddenly I get it after upgrading to 9.1.4?

9.1.4 seems a bit shaky...
That said, you might try disabling "Sleep" for the drive.
As I recall, it's a generic error meaning the computer either isn't getting a response from the drive or that it can't pull data off fast enough.
pancenter-

[URGENT] Mac Pro not booting, Fan error but fans are working.

Hello,
My server G5 is stuck on grey screen with spinning wheel. I ran the AHT and got the following:
2FAN/4/8: CPU A INTAKE
All the fans are spinning. I would really really appreciate if I can get any help or advice. I tried searching for this AHT error but could not find anything solid.
This is our main server and its crucial to our organization and I am sweating bullets here.
I reseted memory and unplugged all RAID drives. The three LED on the Logic board are Red, Yellow and Green; Power On, Trickle and Open Firmware respectively.
Thanks for any help.

Just to say that usually it helps to include the make/model of RAID controllers, whether it is hardware RAID or not. The Mac Pro Apple RAID card IS a PITA and is particular sometimes about drives and its battery reconditioning as well as mounting drives and time to create a hardware RAID5.
When a drive causes trouble it is often though not always because of directory being damaged and OS X can't even inspect to see if there is a system or if it can be mounted.
And because the G5 normally only has two SATA drives, to use three requires a bracket or something else to add drives, like Sonnet G5 Jive. And then a PCI SATA controller with internal ports. But that is just your average SATA controller.
If it was a Mac Pro the thread could and should have been moved to another forum. And you still refer to this as a Mac Pro, not PowerMac. Which leads me to wonder.
Molex y-splitters as needed in a G5 but three yrs for a set of drives, I'd say they were due for backup + erase/initialize and restore. Hopefully you kept them in shape with Disk Warrior during that time (don't rely on just Apple First Aid to maintain and repair/rebuild directories).

Apple Mac Pro online work PDF damage, cant recongnize file??

Hi Everyone, I recently brought a Apple Mac Pro for work, i do a lot of documentation online, i can't seem to open any documents to edit, i tried downloading Adobe Reader, I have been constantly searching for solutions and i'm pulling my hair out. i'm not the best and extremely new to the Mac pro world but, can anyone please assist??

http://www.macworld.com/article/2045686/editing-and-annotating-pdf-files-with-pr eview.html
http://lifehacker.com/5841747/the-best-pdf-viewereditor-for-mac
http://www.wikihow.com/Create-Pdf-on-Mac-in-6-Different-Ways

For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?

For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?

It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out.

Can Mac Pro run AHCI under Windows? No native command queuing?

It seems that Mac Pro runs AHCI under OS X.
Under Windows Vista 32/64 or XP 32/64, some reason AHCI cannot be enabled. It seems to only run legacy IDE mode. Even with modern HD, Mac Pro can not seems to take advantage of AHCI benefits such as hot-plugging and native command queuing. Does Apple thinks that native command queuing is necessary feature under OS X but not under Windows?
Even with installing AHCI driver using F6 during Windows installation, AHCI mode cannot be obtained.
Is there a simple way to enable AHCI mode besides modifying the grub bootloader as some suggested in forum? Or is it not possible until Apple modifies BIOS CSM or allows EFI modification? It seems that Apple wont address this issue with firmware update since Intel Mac Pros have been available for years now.
Any suggestion of enabling AHCI under windows XP / Vista will be welcomed.

HD Tune wont expect to show any change with or without NCQ.
NCQ will show advantage in server environment or heavy multi-tasking environment, not on I/O meter. NCQ may even slow some game playing in some instance.
AHCI adds other stuff like hotswapping or other modern goodies, not just NCQ.
Mac Pro has Intel chip / controller capable of AHCI and RAID (well pseudo Intel Matrix RAID) only if Apple allows us to enble it in EFI.

Lightroom 4.3 on a Mac Pro not working under my user name

Similar Messages

Maybe you are looking for