Lightroom 4.3, Windows8 export file problem

I am running Lightroom 4.3 on a new Windows8 Lenovo PC (T430s). After importing and developing the files, I use the export function to limit file size to 2 meg. After the export is complete, I receive a error message on a screen that reads "some export operations were not performed" and I receive a list of "file could not be written." Actually, all files are written, but they are not limited to 2 meg. I run LR4.1 on a Windows7 pc at my home office, and I use the same settings on both machines. Any suggestions?

0
I have the same problem LR 4.3 Win 8. Exporting files with LR of any file type NEF, TIF, or jpg to a jpg file. If I want to constrain the file size say to 1,000kb it will fail on a lot of the files. If I export say 10 files it will fail on about half of them "Some export operations were not performed". When viewing the target folder with windows explorer the failed files show up as and icon "PS" where the ones that made it will show the thumnail of the photo. If it try to view or delet these files it tells me that the file is being edited in LR. As soon as I close LR the files become available in windows explores but the files size was not constrained to the size I specified in the export function. I am exporting to a different folder than the original files are in. This problem started a couple weeks ago when I updated Win 7 to Win 8. The original files can be any size, or image type. It seem that it is always the same files that will fail if I retry doing the export. If I do not check the "Limit file size to:" box so that the file size is not constrained then the export works just fine except that I end up with too large of a file. I also use the image size function to size the image and that creates no problems. So it would seem that limiting the file size creates the problem. Is there a fix for this in LR or is the problem in Win 8?

Similar Messages

Lightroom 4 - Slowdown when exporting files

Hi.
I'v been experiencing some slowdown on my PC when exporting files from LR4. No matter the size, or if it's .jpg or .TIFF... it always gives me some frezzes (mouse etc)
I have a high end machine, and i don't think that's the problem....
Does anyone have a similar problem or a solution?
CPU
Motherboard
Graphics
RAM
Phenom II X6 1055T @4.0ghz
ASUS Crosshair FORMULA IV
CrossFire ATI RADEON 6850 940/1150
8GB DDR3 CORSAIR VENGANCE @1525mhz
Hard Drive
OS
Monitor
Samsung 500GB / Seagate 500GB / Seagate 1TB
Windows 7 ULTIMATE x64
Dell U2410 IPS
Lastest ATI driver...

None either... CPU always at 0% before exporting.
But i think i found the problem, it's related to my HDD. I was reading some articles, and decided to use my HDD as AHCI instead of IDE.
I had to modify some regs to install the drivers, but after that the slowdown where almost inexistent...
Now i need to know where the problem is, if it's with HDD or motherboard..
Thanks.

Export file problem

Hi All,
I have three users in my Unix system.
1) Backup
2) Ora9ias - application user
3) Oracle9i - database user
I am using the following export command for a database user :
exp userid=adm/$adm_password@$database_sid owner=$module_code file=$mod_filename.dmp log=$mod_filename.log
when ran from backup and oracle9i user it completed successfully ,but giving the following errors when ran from ora9ias user:
EXP-00002: error in writing to export file
EXP-00002: error in writing to export file
EXP-00000: Export terminated unsuccessfully
at present I am using oracle9i release-1 for both app server and database
thankx and regards
anirban

use this command for export and alos check the permission of the folder
give permissin by chmod 777 *
exp cp360(user)/cp360(password)@spqa(connection string) file=asset_subclass_m.dmp(filename) tables=asset_subclass_m(table) indexes=no constraints=no grants=no

Import from export files problem

Hi,
I am a new user. I installed oracle 10g. I took an export one schema and I want to import back. But when I put "import to export files" , it says "the page cannot be displayed." and I installed another machine, it says same thing. What am I do wrong?

Did you try to run export/import from commands? or some kinda GUI tool?
If you use import/export, you can find them from Oracle syntax.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm

Lightroom 5 won't export files to DVD anymore

I have been using Lightroom 5 for a few months, and I have copied several photo collections to disks. Suddenly, the program performs the export task but stops there. Any ideas of how to troubleshoot?

Read this: http://www.lightroomforums.net/showthread.php?19637-Lightroom-edits-not-appearing-when-usi ng-quot-Edit-in-Photoshop-quot

Exporting files from lightroom: problem with filename

Hi!
I am a sports-photographer and i use lightroom since version 1.0. i really like it to edit my pictures and it is very easy to use for importing my files and setting the meta-datas.
but i have one problem, that forces me to open up each file i export once again to rename it, what costs a lot of time:
when i export my files, i can choose a preset to give it a name, which works well. but i would need it like this: "my preferences"001 (f.e. oliver-climbing-01oct09001) and raising in numbers.
lightroom ALWAYS makes a "-" between my presets and the numbers.
does anyone know if there is a possibilty to export the file and give it a name without this "-" in fornt of the number?
glad to find a solution here!
cu or read u
oliver

hello!
thanx for the fast answer!
u are right, but this is not my problem:
i want lightroom to count my exported pictures starting with 001, then 002, then 003 at the end and so on
but if i use the sequency-number or anything else, it does not generate a new name like 001, then 002,
but it does make 001 and then 001-2 and 001-2...
u can see that in the screenshot i made down here...

Lightroom 5 cannot export files in original Raw format (LR 5.4, Mac, OS 10.9.4).

A client has the following problem: When trying to export files in the original Raw format (.CR2), the operation failed and a dialog informs us that "Some export operations were not performed". We can export JPEGs just fine.
After lots of testing, this is what we discovered: The problem does not appear to be catalog-based; we run into the same problem using a test catalog. The export operation works fine, however, with the same test catalog and images on two other machines, and it even works fine on the same machine with a new user admin account that we created.
So it appears to be something associated with the user account, , or with how LR is interacting with the user account, but I cannot figure out what it might be. We can copy the Raw files when using the Finder to do so. But not via Lightroom. Any thoughts, ideas of suggestion would be greatly appreciated! Thanks, Sean

As part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals. This would test LR's read and write permissions from and to the folders being used.
From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
Preference and other file locations in Lightroom 5
You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves. Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name.

I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto try to load them first, then Lightroom can't find the files. Big problem. What to do?

I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?

Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD

File Export Renaming Problem

I want to export collections of files from Lightoom.
I want to rename the newely exported files, but I want to use the same file number suffix as the original file.
I also want to embed the oringal file name in the metadata of the newly exported file.
The problem is that, when I go into the File->Export dialog i.e. the "Filename Template Editor" the orginal "file number suffix" is not showing up in what would be the newly created filename. The orginal file number suffix does not appear to be part of the metadata.
The current filename on disk does however have the file number suffix as part of the name.
However it does not seem possible to extract part of the current file name (i.e. the number suffix) on export.
If I rename the files using a number sequence then adding or removing a file will change the sequence on subsequent exports of the collection.
(Not something I want to do, since it would then be difficult to keep track of the images used originate the exported file, if I updated the collection.)
Renaming all my original files is not a viable option since there are too many of them and different exported files may be in more than one collection.
*Any suggestions as to how to get the file naming I want for the exported files, i.e. "placename-oringal file number suffix"?
(Given the file number suffix is missing from the metadata)
*Also I would like to include the existing file name in the metadata of any new file name.
Any suggestions on how to automate this?

John said:
> Unless you check "minimize metadata", it should all be there.
No I have not checked this box.
> Second, if you rename your files just before you Export (and not in the Export dialog, but actually rename them by batch
> so the LR name is changed) you'll be able to link them up to the originals much more easily.
No this will not work. My naming method is quite useful for me, but not useful for potential buyers.
When I export collections I want to simplify the names.
> Third, the rename editor is pretty flexible.
Yes I know, usually it is sufficient, but in this case it does not do what I want.
> Finally, all the metadata is there, and searching is much easier via it rather than a complex naming convention
> (not that it's so complex, but getting there may be.
Not sure I completely agree here. My naming method works quite well for organising images and for processing and so on.
Now since I have collections spanning multiple directories and so that I want to export the files with a simplified filename.
I expected to be able to do this using the file name editing template.
The BreezeBrowser renamer is much more flexible than the Lightroom filename template editor, so I may end up using that.
However it will be messy and add a few extra steps. i.e. export to a new directory using the existing filename. Then use Breezebrowser to rename the files by extracting the "file number suffix" from the original filename and making sure there is sufficient information in the new filename to create a one-to-one mapping. Then upload the new files to the website.
I stil don't see how to get the original file name into the metadate of the new filename though?l
Really I should be able to do all this in Lightroom.

No thumbnails in finder/preview after exporting files as dng out of lightroom?

Does anyone have experience sorting out the issue of no thumbnails in finder/preview after exporting files as dng out of lightroom?
There are several conversations in the forum about this problem, but cant seem to find a solution.
Anyone know how to sort this out?

Thanks for your reply.
Mac does support previewing dngs in finder and preview. This has not been a problem before (besides when using my fujufilm compact camera, which mac now has updated the Apple camera for).
To answer your Q about dng files. Thats exactly what i do. I have work which involves communicating/transfering multiple lr -edited files to someone else whom further edits in ps. Not only that, I personally use dng as a way of storing my files. I suppose like to keep my files tidy and uniform.
Any mac users out there who has a a solution to my issue with previewing dngs?

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
Make sure your video driver is up to date.
If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

New problem with file name while exporting files

Hi all. Whenever I export files from Crystal, it converts the filename from mixed case to lowercase, i.e. Vendors.pdf or Vendors.csv becomes vendors.pdf or vendors.csv. The destination folder has other files of mixed case, it's not a setting on that side. Since this file is data for an upload, it's a problem. Can't find a setting in Crystal. Is there a fix somewhere?
Thanks
Robin

Hi Robin,
When exporting this is by design, most OS's won't allow the same name so it's mostly not an issue. You could write a small application that exports for you then you can rename it to anything you want.
Thank you
Don

File export size problem (PNG,JPG ....) - CS5

I am using trial of Adobe Illustrator CS5.
When ever I export file (RGB) to PNG or JPG format, there is size difference of 1px in width or hight or both.
But when I save that file with Save for Web & Devices option, then there is no such issue.
I have tested with so many files.
I didn't faced such problem with Illustrator 4.

I have looked all the option .... alignment, pixel grid , not frictional value ..... But still 1px difference.
Now I have switched back to CS 4. For while till problem not solved.
But there is issue. One more thing I am using Windows 7.

Dng files modified with lightroom 4 that are exported do not open in cs4 with the modifications

When I modify and export dng files in lightroom these modifications do not show up in cs4 when I open the exported file. They do if I export the file in jpg format.

Jim, I appreciate the feedback. I believe the issue is as you stated- I need an update to the camera raw in cs4 in order to view the changes. Unfortunately, I do not think is possible since adobe has decided not to support cs4 anymore. My choices as far as I can tell are 1) read the lightroom file out as jpg which has the changes, 2) update to cs6 which probably has the correct camera raw version, or 3) do this cloud thing with adobe which is what they want you to do. I like to print my photos in large format, 17X22 etc, and since my set up prints out nicely from cs4, and pretty much looks terrible from lightroom, I probably will just read out the jpg files and print them in cs4. The reason I use lightroom is that it seems to correct highlights and such much more effectively than cs4. Any thoughts would be welcomed. mike

Lightroom 4.3, Windows8 export file problem

Similar Messages

Maybe you are looking for