Lightroom 4.4 Metadata Auto Sync switch missing from Sync Button.

I am using Lightroom 4.4 on a 2013 Macbook Air OS 10.8.4.
I cannot see the Switch enables auto sync on the Metadata sync button. Its currently visible on another machine a MacPro with Lightroom v4.3. I find this useful to be bale quickly enable and disable the syncing of metadata. I'd be grateful if somewhere could tell me if this has been dropped in v4.4 or have I missed a prefs setting somewhere? MAny thanks

It depends on how the "Metadata Menu>Show Metadata for Target Photo Only" option is set. If it's enabled, the buttons are as you show them, with the little switch to the left of the "Sync" button which would enable "Auto Sync" if clicked (but only possible with multiple photos selected).
However, if that option is unchecked, the button changes and becomes like this:
No switch needed in that situation, the button lights up whenever multiple images are selected.

Similar Messages

Photos Not Syncing; Photos Missing From Albums, No Error Message, Running iTunes for Windows & iOS 7.1.2

I am having an issue with syncing my photos on my iOS devices running iOS 7.1.2, the two being an iPhone 4s and iPad 2 Wi-Fi + 3G.
When I sync photos, I keep on having photos turn up missing from entire albums. I have tried everything I can to resolve this issue from the support article titled <a href="http://support.apple.com/kb/TS3697">iTunes: Unable to sync photos</a>, and nothing has successfully worked in any kind of permanent form. I have even gone so far as to sync albums individually with a limit of around 400-500 total photos per sync, (give or take), and tried using what very little options I have on the photos tab for my devices in iTunes to essentially trick the devices to sync the missing photos. Despite this, iTunes still fails to sync newly added photos from the source location.
I have even made the attempt of re-installing iOS 7 on both devices, and restoring from backup. Again with no avail.
My best guess for my iPhone is that as it is a 16 GB, not all of 15.6 GB of photos will sync to the device, (go figure), but that doesn't explain why recent photos aren't added OR why my iPad 2 of 64 GB has missing photos.
As of this post, I have an estimated 38,940 files, spread across 1,703 folders, (a large amount of folders being in some of the folders; from my knowledge never being more than two folders in). They are all in one dedicated folder on a hard drive I've dedicated to iTunes and music related files, (for the sake of AVOIDING this kind of nonsense, I might add).
As for the system OS and iTunes, I am running Windows 7 64 bit, and I am using iTunes 11.2.2.3, but will have updated to iTunes 11.3 by the time anyone responds.

I have the exact same problem.
Same kind of photos/videos taken with the same camera randomly sync.
Did 11.3 fix this issue?
Sincerely

Images missing from Import?

I imported a large number of images into Lightroom today, then noticed several images are missing from the library. When I try to import again, the image cannot be selected and it says that it is a "duplicate" image. How can I get those supposed duplicate images, that are missing from the library to appear?

So, according to Lightroom, you have already imported the photo. It's not a good idea to import it a 2nd time.
Here's how to find it ... follow all 4 of these steps, in sequence
Go to the Catalog Panel (it's on the left) in Lightroom's Library Module and click on All Photographs
Turn off all filters (Ctrl-L or Cmd-L once or twice)
Expand all Stacks (Photo->Stacking->Expand All Stacks)
Search for one of these files by file name.

Lightroom - metadata auto-save vs. export

Hello!
I understand that with auto-save XMP metadata on, most of an image's Lightroom changes will be auto-saved with the original photograph file whereever it may be.
However, what I don't understand is whether when you export from Lightroom (not export a catalogue/folder, but export an image/some images) whether or not the Lightroom changes (e.g. brightness contrast, saturation, etc.) are considered part of the 'metadata' referred to in the export window.
Afterall, if you are exporting JPEGs, for instance, you are rendering the final (not the original), so why would you want the Lightroom changes metadata because you can't use the Lightroom changes XMP data to go from a final to go back to an original image, can you?!
Thank you!
p.s. This article (http://regex.info/blog/lightroom-goodies/metadata-wrangler) indicates that the XMP CRS block is automatically include with the Lightroom export window, right?

When you export an image the metadata and develop settings are written to the files XMP header. However, the develop settings are for reference only i.e. they are seen but not acted upon by applications such as Bridge. For example, if you open an exported JPEG with develop adjustments into Camera Raw it will show all the sliders at zero rather than the values in XMP. The reason being that the JPEG is already fully rendered file, the develop settings in XMP cannot be undone without creating a completely new file.
Metadata and develop settings saved to XMP differs in that the file has not yet been rendered with the develop settings. So, opening the file in Camera Raw show the sliders at the same values as written into XMP.
p.s. This article (http://regex.info/blog/lightroom-goodies/metadata-wrangler) indicates that the XMP CRS block is automatically include with the Lightroom export window, right?
Yes

Lightroom is changing metadata on imported photos

I imported a batch of RAW images into Lightoom 4.4 and see that a number of the images are displaying the icon warning that metadata has been changed in Lightroom although the affected images have only just been imported into the catalog and I have not made any changes to them. 130 images out of a batch of 300 are being affected.
I have selected the affected images and re-read the metadata using Metadata / Read Metadata from File, but within a couple of minutes of being re-read, the metadata changed icon has reappeared.
My initial thoughts were that I had changed one of the preferences and something was being automatically applied, but if that was the case then I would have expected it to be applied to all 300 images in the batch which were taken on the same day on a single camera. I've created a smart collection to identify images with metadata changed in Lightroom and find that they appear to be randomly spread through the catalog affecting both RAW images and jpegs from 3 different cameras.
In order to exclude any changes to Lightoom preferences I may have made, I installed Lightroom 4.1 on another PC and created a new catalog using the default settings. I then imported the same batch of 300 RAW images and confirmed that the same ones displayed the warning icon that metadata was changed in Lightroom .
Can anyone explain what might be causing this?
The PCs are Windows 7 Professional, Lightroom 4.4 (Lightroom 4.1 on the test PC), RAW files are from Nikon D90 and D7100 cameras.
Thanks

I agree with most of your points:
Points 1, 2, 3 - I agree.
Point 4.
yes - all of my RAW files have .xmp files associated with them as they contain the metadata and keywords I have entered via Bridge/ACR.
Lightroom imports these details but shouldn't then be making any additional changes which need to be written back to the xmp files. This is where the problem has surfaced as Lightroom has made unknown changes to some of the photos and wants to write them back to the xmp files - see my comments below about point 6.
Point 5.
By installing a trial copy of Lightroom 5.3 on a different PC and creating a new catalog I avoided carrying forward any incorrect preferences etc I may have previously used - all photos in this new catalog have been freshly imported for testing. The fact that Lightroom displays the "metadata has changed" icon to the same photos as my original Lightroom 4.4 installation after importing them demonstrates that an unidentified Lightroom process is making changes to some (but NOT ALL) of the imported photos.
The problem is identifying WHAT Lightroom has changed and the implications of these changes.
Point 6.
"auto write to xmp" - This is not selected in my catalog settings as I want to be in control of when Lightroom updates the xmp files. At present I am still learning Lightroom so I don't want to accidentally write any changes back to the xmp files until I am completely sure of the consequences, hence my main work still takes place in ACR.
Point 7.
My current workflow choice is to continue using xmp sidecar files as per the following statement at
http://www.adobe.com/uk/products/photoshop-lightroom/faq.html
"Changes you make in Lightroom can appear in Camera Raw and vice versa. To complete this interactivity, changes in both Camera Raw and Lightroom need to be written to XMP metadata. This is so that each software application can recognize the other's edits."
- but I have to be confident that any Lightroom changes to the xmp files are as a result of my planned actions.
Point 8.
All of the default Develop Settings are deselected in my preferences/presets and I don't have any import presets - the develop settings and metadata are set to "none".
Do you have any suggestions on how to identify what changes Lightroom has made to the photos where it has set the "metadata has changed" icon?

Auto-brightness switch has disappeared?

So...this is kind of weird. I went into the Wallpapers & Brightness settings to adjust the brightness of my screen and there's no auto-brightness switch. I actually really like the auto-brightness. Constantly adjusting it manually is kind of a pain -- especially if I'm running and my phone is in my armband.
I tried resetting the settings and I just restored my phone. The switch is still gone.
Has anyone else enountered this? Is there something obvious I'm missing? That switch should be there, right?
I have an iPhone 5.
Thanks in advance...

Hello Geoffery Stone,
Thank you for using Apple Support Communities!
I want to recommend backing up your phone to iTunes and restore the device, but this time, rather than restoring from a backup, setup the phone as new and see if the switch is there.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
If it is, then restore from your backup. If the switch goes away, then either an app, or a setting is removing it.
If it is a setting, then resetting all your settins should fix it:
Reset iPhone settings. Go to Settings > General > Reset, then choose an option:
Reset All Settings: All your preferences and settings are reset.
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph7a2a9399b
Cheers,
Sterling

Iphone 4 wont sync to itunes anymore. Itunes opens then a message comes up saying I need to restore it. I want to avoid doing this as I've noticed some of my purchases since updating itunes are missing from computer but they are on my phone.

I have reset my phone, put the latest updates on itunes and iphone and thought it might work then, but no luck. I am trying to avoid restoring it as I dont want to loose the data I have purchased that is missing off my itunes since I updated that. I'm not sure how to contact itunes to get my data put back on my itunes on computer. All my purcahsed data from itunes still comes up on my phone as it hasnt been able to sync to the update. DOes anyone know how to contact itunes to have bought data re-put back on. It comes up in my itunes acocount with the date and purchase number but these items are missing from my itunes purcahsed items. Weird?
I am on an imac. Is there anyway I can get around the issue of syncing again or should I just restore once I have contacted itunes about them deleting my paid for items! I feel very ripped off, its like buyoing something from target and having the manager come to your house and retrieve it! lol

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I delete e-mails from one IPad without removing them from other IPads on same icloud? I'ved tried switching off mail sync on all devices but this only works when deleting on IPhone

We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
We don't want this, but at the same time we need to keep our devices clear of clutter.
It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
anybody got any better ideas ??

We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
We don't want this, but at the same time we need to keep our devices clear of clutter.
It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
anybody got any better ideas ??

Technical question: Is it possible to work on the same Lightroom catalog across two computers and have the catalog sync? If so, how??

Technical question:
Is it possible to work on the same Lightroom catalog across two computers and have the catalog sync? If so, how??
Here's a little more information on what I am trying to do.
I have a desktop computer with 4tb worth of pictures that has Lightroom and Photoshop on it. I also have a laptop with Photoshop and Lightroom. I would like to be able to edit those same pictures with their current edits that are currently on my desktop on my laptop. If this can be done, I'm sure I need to be on the same wifi network for my laptop to be able to access my desktop's photo library. I am technically savvy enough to map a network drive, but how do I get my two Lightroom catalogs to sync when I make a change on one of my computers? Would i be working only on one catalog? Or two separate catalogs that would need to be manually synced to the other computer? Would it be beneficial to put my lightroom catalog on something like dropbox?
I'd appreciate any information or tutorials if someone knows how to do this.

I do this by having my LR catalog and photos on an external drive that I swap between the two computers. I am on Windows and have the same drive letter assigned to the drive on both computers.
Because the photos are on a portable drive I back up the portable drive to another hard-drive every night or after important work, because portable drives are susceptible to damage or loss.

How come the switch user option is missing from my lock screen?

I upgrade to Lion my iMac Core 2 Duo and now when I lock the screen the switch user option is missing from the lock screen, you just have to cancel o renter as the original user, so that if another member of my family wants to switch and use the mac he or she cannot do it.
This is what I am talking about (image taken from a lion review): http://dl.dropbox.com/u/134544/forum/Schermata%2007-2455766%20alle%2011.05.12.pn g
The switch user option is totaly absent, I just have the cancel.
It that a bug or what?
Please note this happens only when I lock the screen from the screensaver, i.e. requesting the password to restart from the screensaver, if I get to the login windows all users appears correctly and people can switch back and forth.
Thank you.
– cordialmente,
tiziano solignani, da  Mac
http://ts.solignani.it (splash)
http://goo.gl/p6Sb0 (libri)

I just talked to apple support. They said Lion doesn't support this feature. They gave me a work-around, which was to disable requiring a password in the screen saver. Then enable user switching so it appears in the top right of the banner. Note that since the screen saver no longer locks the screen, in order to actually lock the screen the user must click on the upper right user list and select something like "Login user...".
This issue has left me disappointed with apple for a few reasons. Hopefully someone at apple will take note:
1. Apple removed a useful feature.
2. Apple did not provide a response to this thread which would have been the best forum to inform users of this change. It would have saved me and apple one long phone call.

Help! I synced my iCal from my old iPhone to iCloud. It worked great. I've done this because I'm switching to a Samsung phone and need to sync my iCal to my Google calendar. In attempting to do so today, my iCal is empty. How can I retrieve my iCal info??

Help! I synced my iCal from my old iPhone to iCloud. It worked great. I've done this because I'm switching to a Samsung phone and need to sync my iCal to my Google calendar. In attempting to do so today, my iCal is empty. How can I retrieve my iCal info??

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

ITunes recognizes iPod but can't sync - driver missing?

Here's the rundown. Several months ago, the complete content of the old XP machine where this iPod's library resided was migrated to a Windows 7 Home Premium system using LapLink PC Mover. iTunes had never previously been installed on the Windows 7 unit. iTunes appeared to be functional afterwards, but on the first and all subsequent instances of attempting to sync the iPod, clicking on the Sync button did and still does nothing. I have tried connecting the iPod to multiple different motherboard-based and pcie-based USB ports, and to a USB2.0 external hub. (Sometimes the screen briefly flashes as though it was switching to the sync process monitor, but usually it's just no change.) I've tried uninstalling all of the Apple software from the machine, rebooting, and reinstalling. (When I say "all", that includes iTunes itself, Bonjour, Apple Software Update, Apple Mobile Device Support, and Apple Software Update, in that order. Trying any other order produced complaints. Quicktime is not installed on this machine; iTunes and the iPod are not used for video.) In looking at the postings of others who have had similar issues, I found a recommendation to reinstall another driver that I have verified is not loading and is not running with the iPod hooked up: Apple Mobile Device USB Driver. I have tried to reinstall this driver, but it hasn't worked. What I have come to suspect is that something in the Windows registry got borked during the transfer, and is causing the load process for the *needed* driver to fail, possibly by trying to load the old XP version. But my registry-fu is not strong in this, so I'm looking to see if anyone else has run across this issue previously and found a solution.
Points to note:
Windows 7, installation was a port from XP via LapLink PCMover
5th gen classic iPod 80Gb with 34Gb free
iTunes version 11.4.0.18 is installed (This was the current version when I started trying to find the problem.)
Apple Mobile Device Support software is loaded.
Apple Mobile Device USB Driver is NOT loading, either before or while the iPod is connected.
In Device Manager, the iPod appears as a Disk Drive and as a Portable Device when connected, but does not appear in the Universal Serial Bus Controllers list.
iTunes recognizes the iPod and can access it sufficiently to verify that it does not need to be updated.
iTunes can eject the iPod.
iTunes cannot sync the iPod.

I can now expand the information somewhat. On my second, very similar setup (5th gen Classic connected to Win 7/32 with iTunes 11.4.0.18) I was able to successfully do the initial sync of the iPod several weeks ago, but this afternoon, when I tried to sync it to include the music I had added recently, it failed in the same manner as the other system. I really, really, really DO NOT want to downgrade to iTunes 12 with it's horrible antinavigation interface and lack of the very useful and needed Sidebar, but it is beginning to look like 11.4.0.18 is problematic, and I don't have an installer for anything else at present.

I have been trying to get my iPhone to sync with a new computer. As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone. How do I get the apps on the old one to the iPhone and then the new c

I have been trying to get my iPhone to sync with a new computer. As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone. How do I get the apps on the old one to the iPhone and then the new computer?

You don't. Backup your itunes library on the old computer and move it to the new computer.

Lightroom 4.4 Metadata Auto Sync switch missing from Sync Button.

Similar Messages

Maybe you are looking for