Lightroom 4 - GPS coordinates not saved in EXIF when Exporting JPGs

I have updated GPS coordinates using the new Map module but these are not output with the EXIF when I export JPGs.
I have ensured that Remove Location Info is unchecked.
I welcome any advice
regards
JWW001

As requested I attach screen shots of the LR4 metadata panel after I have updated the coordinates in LR4 and also the LR4 export dialog. Also a JPEG of the exported photo which still has the original coordinates untouched from the camera along with the EXIF coordinates. These are incorrect as the camera hadn't acquired the satellites. LR4 has successfully exported the copyright information.
regards, JWW001

Similar Messages

Manually geotagging using GPS coordinates - not location names?

I recently came back from a vacation in Oregon where I took close to 1000 pictures. Since I knew it would be difficult to remember the exact location of every picture, I brought along a standard GPS and took a snapshot of the coordinates displayed on the screen at each location I took pictures. I probably should have tested my theory first, but I assumed I could just plug the GPS coordinates manually into iPhoto. It turns out I can only use a location name - not coordinates. Since most of my photos were taken away from civilization, they don't exactly have names.
I don't mind doing a little manual work to make this work, but does anybody know how I can get exact GPS coordinates on my picture? I don't really want to just type "Portland Starbucks" or something and have to drag around until I'm close to where I think the picture was taken.
Thanks for your help!

iPhoto has a neat feature called "Help"
Here is what it says about your question:
*Using latitude and longitude to add places to your photos*
If you have latitude and longitude information for the place where you shot your photos, you can use it to add the location to your photos and Events.
To use latitude and longitude to add a place:
Select the photo or Event you want to add location information to.
Click the Information button in the lower-right corner.
This “flips” the photo thumbnail or Event tile so that you can enter information about it on the “back.”
NOTE:You can also select and add locations to more than one photo in an Event or other group, without adding locations to them all. To do so, select the desired photos by dragging or Command-clicking, move your pointer over the selected photos, and then click the “i” button for any one of them. Continue to step 3.
Select “photo place” for photos or “event place” for Events, and then choose “Find on map” from the pop-up menu that appears as you type.
The Add New Place dialog appears.
In the search field, type the latitude and longitude, separated by a comma.
For example, you can type “24, -110” or, if you prefer, you can use a longer format, such as “24.15988731, -110.50838234.” It’s important to always put the latitude first.
Look at the map to confirm the location, and then do one of the following:
If the location is correct, continue to step 6.
If the location is incorrect, you can enter the latitude and longitude in the search field again, or drag the pin to a more exact location on the map.
If you want, use the plus and minus buttons to zoom in and out, and drag the map to center it on a better spot.
When you’re finished, click the Assign button.
LN
Message was edited by: LarryHN

EXIF when exporting?

Hi there,
it seems that iPhoto is not capable to add the EXIF data when exporting a file. Is that true? And that the only solution is some EXIFtool hack?
Thanks for any advice!

There is a way to write keywords and comments to the orignial files for use by applications that can read the EXIF and IPTC fields. See the first part of Tutorial #1.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

'file could not be written due to an error' when exporting jpg

I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
P

Mylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul

Lightroom 5.4 changes not saved after touching up in Photoshop CS6

I'm using Photoshop 5.4 and Photoshop CS6, licensed via CC. My workflow includes Lightroom edits that apply to an entire group of photos (white balance, colors, lens corrections, etc.) followed by an individual export to Photoshop CS6 using the Edit in Photoshop menu option. Once opened in Photoshop, the changes in Lightroom appear to be applied. After applying some manual touch ups to the photo, then saving, the resulting .tiff file loses the Lightroom edits. The original .nef file contains the Lightroom edits, but not the touch ups; the .tiff file contains the touch ups but not the Lightroom corrections.
How do I resolve this?

In Library, set your sort order to Filename instead of Added order and see if the files show up, then.
How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which.

Lightroom 5.6 does not recognize external drives when trying to locate a picture with a missing link on a Mac OS 10.8.5 and ideas?

A recent upgrade to LR5.6 no longer allows me to locate pictures on external drives with Mac OS10.8.5. Does anyone know how to fix this?

Well, it still would help if you stated "exactly what steps" you are trying, as I asked above. That would lend some clarity to the discussion, as I can think of a couple of reasons you might want to do this and a couple of places where you might (or might not) be looking. I think to move forward, we need these details.
However, have you tried this: Adobe Lightroom - Find moved or missing files and folders

Yahoo sent mail not saved to server when using Mail only.

Why does my Yahoo sent mail not get saved to the server when I use Apple's Mail program? (I have it saved in settings to keep sent mail on server). I can see it in my Sent mail folder on Apple Mail but not on the yahoo server. It's an IMAP account and it works fine on my iPhone.
I have tried changing the outgoing ports as well and erasing the account and reinstating it on the Mail program. No luck.

NatMac:
This worked for me:
ernestobenedict London
This solved my questionRe: Yahoo Mail folder behaviour with Apple Mail 5.0
Dec 8, 2011 5:14 PM (in response to ernestobenedict)
I finally figured out how to fix this; under the mailbox menu there is an option to "use this mailbox for" that allowed me to select the Sent Items folder from my Yahoo IMAP list of folders and make it the default for sent items from the Mac OS X mail software! "
Thanks to ernestobenedict for this solution!!!

JDev 9.0.3.3 Data not saved to DB when using Non-Transaction DataSource

Hi,
Env: JDev 9.0.3.3/WL 6.0 sp1/Oracle 8i
We have successfully deployed our application in 3-tier(remote mode) in JDev 9.0.3.2. using JClient, EO/VO, EJB Session Facade (BMT).
Now we are planning to use JDev 9.0.3.3 (build 1205)
We are using ejb.txn.type=local and Weblogic DataSource(non-txn).
In JDev 9033, after commit the data is not getting saved to DB. No errors in the log below.
This works fine in JDev 9032.
This does not work with simple Master Detail and also with single row simple form.
==========================================
[281] BaseSQLBuilder Executing DML ... (Update)
[282] Executing DML...
[283] UPDATE CISDBA.DCX_BASE_COST_V BaseCost SET ITEM_STAT=?,TID=? WHERE PART_NUM=? AND MY=?
[284] cStmt = conn.prepareCall(" UPDATE CISDBA.DCX_BASE_COST_V BaseCost SET ITEM_STAT=?,TID=? WHERE PART_NUM=? AND MY=?"); // JBO-JDBC-INTERACT
[285] cStmt.setObject(1, new BigDecimal((double) 2.0)); /*ItemStat*/ // JBO-JDBC-INTERACT
[286] cStmt.setObject(2, "t2733bx"); /*Tid*/ // JBO-JDBC-INTERACT
[287] cStmt.setObject(3, "04782612AA"); /*PartNum*/ // JBO-JDBC-INTERACT
[288] cStmt.setObject(4, "2004"); /*My*/ // JBO-JDBC-INTERACT
[289] cStmt.execute(); // JBO-JDBC-INTERACT
[290] cStmt.close(); // JBO-JDBC-INTERACT
BaseCostImpl: after doDML
BaseCostImpl: End of doDML()...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[291] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[292] BaseSQLBuilder: setSavepoint 'BO_SP' ignored
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[293] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[294] EJBTxnHandler: Commited txn
[BaseCostInvestCostViewImpl.afterCommit] Enter
[295] BaseCostInvestCostView2 notify COMMIT ...
[BaseCostInvestCostViewImpl.afterCommit] Exit
[BaseCostInvestCostViewImpl.afterCommit] Enter
[296] BaseCostInvestCostView1 notify COMMIT ...
[BaseCostInvestCostViewImpl.afterCommit] Exit
[297] SubDept2SubProgView1 notify COMMIT ...
[298] InvSubDeptLOV1 notify COMMIT ...
[299] SubProg2SubDeptView1 notify COMMIT ...
[300] SubProgramLOV1 notify COMMIT ...
[301] StdCostView1 notify COMMIT ...
[302] AltCostView1 notify COMMIT ...
[303] PlantCodeView1 notify COMMIT ...
[304] PaperCarView1 notify COMMIT ...
[305] InvestCostItemView1 notify COMMIT ...
[306] SavedSearchView1 notify COMMIT ...
[307] AltCostView1_BaseInvestToAltViewLink_AltCostView notify COMMIT ...
[308] InvestCostItemView1_BaseInvestToInvestItemViewLink_InvestCostItemView notify COMMIT ...
[309] PaperCarView_BaseCostTrackedVehicleViewLink_PaperCarView notify COMMIT ...
[310] VehicleProgramLOV1 notify COMMIT ...
[311] SubDeptLOV1 notify COMMIT ...
[312] Transaction timeout set to 28800 secs
[313] [NavigationEvent: BaseCostInvestCostView1 From 0 to 1]
[314] Column count: 14
[315] ViewObject : Reusing defined prepared Statement
[316] Binding param 1: 769661
[317] Binding param 2: 2004
[318] [RangeRefreshEvent: AltCostView1 start=-1 count=0]
[319] Column count: 13
[320] ViewObject : Reusing defined prepared Statement
[321] Binding param 1: 769661
[322] [RangeRefreshEvent: PaperCarView1 start=0 count=6]
[323] Column count: 4
[324] ViewObject : Reusing defined prepared Statement
[325] Binding param 1: INV37
[326] [RangeRefreshEvent: InvestCostItemView1 start=0 count=1]
[327] [NavigationEvent: AltCostView1 From -1 to -1]
[328] [NavigationEvent: PaperCarView1 From -1 to 0]
[329] [NavigationEvent: InvestCostItemView1 From -1 to 0]
========================================================

Hi Carsten,
I tried to reproduce your problem, but couldn't. Let me explain what steps I executed and perhaps you can advise where I've not matched your steps.
--Using build jdeveloper 9.0.3.3.1203, I built a new bc4j project containing a dept-emp default bc4j project (deptEntity, empEntity, deptView, empView, deptempFKAssoc, deptempFKViewLink, ApplicationModule).
--In dos shell, I went to the directory \jdevdir\jdev\bin and ran setvars -go to set the correct jdk version
--In the dos shell, in the directory \jdevdir\j2ee\home I executed the following command to install oc4j:
java -jar oc4j.jar (defaults pswd to welcome for admin)
--I remoted the appmodule to EJB Session Bean (BMT) and created a new deployment profile using the 9ias configuration for the application module.
--I deployed the bc4j objects to oc4j
--I created a new project
--In this project I created a new jclient master-detail form using the above project's application module for the data model
--I saved all and compiled the jclient project
--I ran the jclient form and inserted a master record
--I committed the transaction successfully
--I browsed records, then edited a record
--I committed the transaction successfully, then browsed.
Is there something I've missed? Did you migrate your project and not start by creating a new project? Is there something special about the database schema you are using?
Thanks,
Amy

Edited RAW files not saving as TIFF's or JPG's

I thought working with RAW files in iPhoto 08 worked the same as it did in 06. I have lots of Nikon RAW (NEF) files from my 06 library that used to change to a JPG as soon as I finished editing them in iPhoto 06 or a tiff if I had that option selected in preferences. The RAW badge would go away and I would then see a JPG in my library.
None of this happens in 08. I edit a RAW file, the changes look to be saved when I move to the next photo, but the RAW file remains with the RAW badge still showing. Can anyone tell me why this is happening?
Thanks
Joshua

I also noticed something else and it looks like this issue is not only with RAW but JPG files as well. It seems like iPhoto is not finalizing the edit and saving the file. Even after closing the program you can return to those edited photos in edit mode and they look as if they are still in the middle of being edited. The level sliders still show the highlighted movement you made to them and you can still hit the shift key and see the before and after. So it seems like it's holding the changes made to the file but not following through and finalizing the changes and saving the file.

ACR not saving color profiles when saving out to TIF...

The Players:
ACR 4.6, PS CS3, Mac OS X, MacBook, Nikon D200
The Problem:
ACR does not seem to be saving my color profiles when I work on my Nikon D200 NEF files. After saving them out as TIFs and opening them in Photoshop CS3 - files read as "Untagged RGB" and the colors are definitely way off from what they were saved as in ACR. Frustrating!
The Request:
Thank you for any help - trying to get a job done!
Best,
Paul

Paul,
You need to update your Photoshop to version 10.0.1 ASAP. You're also two versions behind in the OS; 10.5.6 is out.
If you do not know how to trash Photoshop's preferences, check out the FAQs in the Adobe Photoshop Macintosh forum:
http://www.adobeforums.com/webx/.3c057d1b
To trash Bridge prefs, hold down the Option key as you relaunch Bridge, then check the boxes in the ensuing dialog box.

Firefox is not saving my tabs when Firefox starts back up after shutdown -- what can I do to fix this???

Ever since I updated to the latest Firefox 3.6.12 a several weeks ago I began to have this problem. Under 'Options' and 'Start Up' I have highlighted - when Firefox starts " Show my Windows & Tabs from last time". My settings have never changed since this last update to the latest version so I don't know why I am experiencing this problem. I will say that I did recently do a Windows Reinstall on my computer (Window XP - SP3) but this didn't start to become a problem until the latest Firefox update a week or two later so I doubt this may have something to do with the problem.
After looking on the forums for solutions to this problem I came across one thread, which said that this can be a problem with the file sessionstore.js and sessionstore.bak in the Profile Folder and then said what to do to find and delete these type of existing files. Well, I followed the instructions on how to do so and yet Firefox still doesn't always save my Tabs upon computer shutdown. I'd say 2 out of 3 times I do a restart or shutdown it saves my Tabs but 1 out of 3, it does not. By the way, I thought I'd also mention that this exact problem is happening on two of my computers both running Version 3.6.12.
So what gives?...could it be problems with the latest Version 3.6.12 causing this since that's when this problem started occurring? What else can I do to troubleshoot and finally fix this? ...it has become very frustrating since I keep a lot of open tabs before closing Firefox and never know when it's not gonna save!!!

Make an appointment at an Apple store if there is one nearby.

Firefox is not saving open tabs when closing, it says other session of Firefox is running but this is not the case.

Firefox used to save open tabs when closing the browser. This no longer happens and Firefox says other session running. Task Manager shows that this is not the case.
Recently installed an flv/mpeg viewer "aLot" which placed a toolbar in Firefox.
Am running Firefox 3.0.5 on Windows XP with Service Pack 3.

Your useragent says your are running Firefox 3.6.13 -> is that true.
If not, do the following and post back your new Firefox version:
* Type about:config in the URL bar and hit Enter
* If you see the warning, you can confirm that you want to access that page.
* Filter = general.useragent.
* Right-click the preferences that are bold, one line at a time, and select Reset.
* Then restart Firefox

Macbook pro not saving any work when on shutdown or restart.

Macbook Pro 13'' early 2011.
i5, 4GB and 320 GB
OS: Mac OS X 10.7.3
System Pref version: 11.0
Everytime I shutdown or restart it does not save any of the system prefernecs and not any work done in terms of text, coding in Eclipse I mean nothing. No matter what you do when you start mac again it shows you the system as it was on Saturday.
This is very bad because spacially you rellay on your mac to work.
Regards,
Anshul Meena

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Menu's not saving in Encore when I edit them in Photoshop

When I use the 'edit menu in Photoshop' feature and make changes to a menu it doesn't show the changes in Encore. What's up with that?

Joe, here is my exact workflow.
I open up Encore 2.0. I create a blank new NTSC menu. I right click on the menu and choose edit in Photoshop. I go into Photoshop CS2 and make whatever changes, background, text etc.
I do a CTRL - S in Photoshop CS 2 and Alt Tab or go down to the taskbar and switch back to Encore 2.0.
Nothing has updated. I then switch back over to PS CS 2 and my menu is still there. (I have tried closing the menu and going over to CS 2, doesn't work and as such I have lost all my changes.) I then can only choose save as and PS points me to the temp folder where encore is saving it's menu files. PS prompts me to overwrite the existing file, I choose yes. And then switch back to Encore. Lo and behold it is now updated! I have just started incorporating the save as into my workflow.
Interestingly enough I thought I would try this out with Encore 1.5.1 and it worked perfectly. Shut down Encore 1.5.1 and opened up 2.0, started another new project and did the exact same. Same issue! Is having 1.5.1 installed causing an issue?
Please tell me if I can tell you anything else.
Thanks,
Martin

App tabs are not saving nor highlighting when I get updates

When I restart Firefox, my app tabs sometimes saves, and sometimes they do not. Also I open a new window in a current session, my app tabs do not save between windows. I would expect them to be on every window I opened; otherwise, they'd really be no different from normal tabs.
Also, Firefox says that when an app tab updates, it will highlight. However, my hotmail app tab and my facebook app tab will not highlight no matter how many emails or facebook notifications I receive.
Edit:
Is there a way to have the app tab save the page you pinned. For example, have it save my facebook wall and have it open my facebook wall when I restart firefox instead of having it load a friend's profile page?

The app tabs feature is still in a relatively early stage of development. The option to remember app tabs independently of sessions has not yet been implemented, but it will be part of the release version of Firefox 4.

Lightroom 4 - GPS coordinates not saved in EXIF when Exporting JPGs

Similar Messages

Maybe you are looking for