Lightroom 4 has previously upgraded the selected catalog

I have upgraded to LR 4 and in the process, I upgraded my primary catalog.
However, ever time I open the catalog I get a dialog with the message "lightroom 4 has previously upgraded the selected catalog"
Would you like to use the upgraded catalog instead?"
What is going on?

Ah, of course.
Thanks for making what should have been obvious clear to me.
We all get a little remedial sometimes.
Thanks for the jolt!
James Haney
[email protected]
c: 312-339-5565
<http://www.linkedin.com/in/jameshaney>
2012/4/4 Dorin Nicolaescu-Musteață <[email protected]>
   Re: lightroom 4 has previously upgraded the selected catalog
created by Dorin Nicolaescu-Musteață<http://forums.adobe.com/people/dorin_nicolaescu>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4312763#4312763

Similar Messages

  • Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

    Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue. 

    You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
    myc680.local> version
    Current Version
    ===============
    UDI: C680 V FCH1611V0B2
    Name: C680
    Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
    Model: C680
    Version: 8.5.6-074
    Build Date: 2014-07-21
    Install Date: 2014-07-29 11:16:34
    Serial #: xxx-yyy1611Vzzz
    BIOS: C240M3.1.4.5.2.STBU
    RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
    RAID Status: Optimal
    RAID Type: 10
    BMC: 1.05
    There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID.  You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
    myc170.local> version
    Current Version
    ===============
    UDI: C170 V01 FCH1428V06A
    Name: C170
    Description: Cisco IronPort C170
    Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
    Model: C170
    Version: 7.6.3-019
    Build Date: 2013-06-09
    Install Date: 2014-09-12 13:52:24
    Serial #: xxxxxxD87B39-yyyyyy8V06A
    BIOS: 9B1C115A
    RAID: 02
    RAID Status: READY
    RAID Type: 1
    BMC: 2.01

  • Lightroom was unable to prepare the selected file at (file path to image) for editing. it wil

    I have been using lightroom since Beta and this is the first issue that I can't seem to fix.
    I was working on some files editing in external editors - PS5 & Niksoftware I had worked on 4 or 5 images no problems, working awesome as normal.  Then I decided to get rid of one of the files - an edited image - when it asked to remove from lightroom or from disk, I clicked, remove from disk. I never do that but trying to be better with space.  Then tried to edit a different image and the error "Lightroom was unable to prepare the selected file at (NEF - the proper location) for editing. it will not be opened." comes up.
    I looked on line and one answer was to delete the preference file and then restart, which also meant reloading the catalogue.  All of which worked no problem but the error still is coming up.  I have restarted lightroom and the computer a couple of times, in different sequences
    I have lightroom 5.3 64 bit on windows 7, as I said all working perfectly until deleting one file. 
    Anybody have any ideas for me?

    I had this error message, too. Turned out it was due to my use of subst to create a virtual drive letter for my photo library. See Lightroom 3.2 - Using subst to a local drive fails for the solution! (even with LR 5.5, still)

  • Hi I'm getting Lightoom error when trying to edit in Nik Software "Lightroom was unable to prepare the selected file at    /Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.  It will not be opened.

    Lightroom was unable to prepare the selected file at
    /Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.
    It will not be opened.
    what does this mean? can anyone help?

    Yes it is on a portable drive yet I have already worked with it and exported it as a jpg. The problem arises whenever I try to edit in the plug-ins from Nik software...this just happened recently as it never happened before...for years?

  • When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do?

    When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do to correct this?

    This could be a read/write permissions issue with the destination folder for the catalog. Use your favorite search engine to search for changing disk permissions. What operating system are you using?

  • How to merge or upgrade the PSE8 catalog into the LR3 master catalog?

    I did some searching but wasn't able to find a good match for the issue I'm trying to resolve.
    I have recently installed LR3 after using LR3-beta, and had also been using PSE8 as my main photo library. After installing LR3 I used the "Upgrade Photoshop Elements Catalog...." to create a LR3 catalog of all photos that were in PSE8 catalog. In doing so LR8 created a separate catalog (Lightroom Catalog-2.lrcat) for these photos. However, I would like all photos in one catalog in LR8 (preferably in the LR8 master catalog: Lightroom Catalog.lrcat). Is there a way to either merge those 2 catalogs, or is there a better way to add the PSE8 photos into the LR3 master catalog? Thanks.

    Thanks for the reply.
    Tried that - while in LR using the master catalog, I selected the other catalog (Lightroom 3 Catalog-2.lrcat) and received the following pop-up box:

  • Macbook pro is not working with Canon pixma iP1500, but has previously.  The printer works with an old PC without trouble.  "printer is offline" message when this printer is plugged into macbook.  Any clues to get it to work?

    Macbook pro is not working with Canon pixma iP1500 but has previously.  Printer works with an old PC but macbook shows "printer is offline".  Any clues?

    Hello Betty7,
    Please let me take a moment to say "Welcome" to the HP Forums.
    I hope you enjoy your experience!
    I see that you are having an issue with getting the printer reinstalled. 
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I have Lightroom 4. My external hard drive crashed and now my file is missing from the hard drive.In Lightroom, it has ? on the photos used. I've backed up the photos onto another hard drive and wanted to use it so I can work on my folder of images. Can s

    How can I use my backup external hard drive to sync into Lightroom and still work on the same photos I was working on and get rid of the ?. The photos are on a folder so I need to someone sync the folder into Lightroom. Please help!

    When I right click on an image, then went to Go to Folder in Library, it pulls up the new external hard drive where I made the new link. When I try to work on the photos, the image still says file image is offline or missing. When I right click on the image to Show in Finder, it says the image could not be used because the original file could not be found. I eventually did click on their locate and found the image. When I linked those two together, a few minutes later ALL the "?" went missing and now IT WORKS!!!!
    That was weird!
    Hope this helps someone else in my predicament.

  • I have upgraded to Lightroom. Can i delete the Elements catalog and separately import underlying files and folders directly into my LR catalog?  I need to free up memory space.

    at this juncture Elements contains very little.  I need room on my memory and hard drive.
    any advice greatly appreciated.

    at this juncture Elements contains very little.  I need room on my memory and hard drive.
    any advice greatly appreciated.

  • Lightroom was unable to prepare the selected file at ... for editing. It will not be opened

    Hello,
       I am trying to open an image into Photoshop from Lightroom, however recently i am getting this error message. can anyone help?
    Thank you so much in advance.
    Andrew

    This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
    BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • Has anyone upgraded the W520 CPU?

    I have seen several requests to see if it was possible, and never saw a positive confirmation. Just "it should work". Has anyone here actually done this? How well did it work? Was the fan up to the task?
    I currently have the 4270CTO (W520) with the 2620m. I have been finding the dual core too limiting in some tasks (Fallout NV and Diablo 3 for example) and was hoping the 2760qm/2860qm would work out well.  Warranty expires at the end of the month anyhow, so no issues there.

    You would need to consult the Hardware Maintenance Manual and see if a quad-core CPU would fit in your "specific" machine. The motherboard and the thermal unit of a dual-core machine are different than the those of a quad-core machine. The thermal unit of a quad-core machine is more powerful. A quad-core motherboard also comes with 4 RAM slots; its circuitry is designed to deliver 45 watts or 55 watts power needed by a quad-core CPU.
    Twitter @thitiv | Work | ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
    2 x 256GB Crucial M4 & C300 SSDs | Intel Centrino Ultimate-N 6300 | Ericsson F5521gw WWAN | Ultrabay Blu-ray Burner
    NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | ThinkPad Battery 55++ (9-cell) & Battery 27++ (9-cell slice)

  • Lightroom 4 (beta and current release) - Issue with Select Catalog screen - catalogs not displaying

    I noticed this during the beta test version of LR4 and was hoping it would be corrected in the actual release (which I installed yesterday).  Here's the issue:
    When the Select Catalog window opens, catalogs will not display unless I click in the empty space in the window (first screenshot)...then they will appear one by one as I start to click (second screenshot) until all are displayed.
    Does anyone have any suggestions??  These catalogs are NOT on a network drive, they are on my desktop machine (Win Vista 64-bit).

    I have the identical problem.
    LR3 worked perfectly. LR4 won't refresh the Catalog screen at startup without me clicking on each entry. Only when an entry is selected will it appear.
    I have an nvidia GeForce 9800GT video card, supporting dual monitors.
    I'm using Vista 64.
    I just upgraded to LR4 64bit, and immediately had this problem.
    I installed the most current video driver (2/12/2012) with no change in problem (or performance).
    I have not noticed any other program having issues, and have not changed any hardware recently.
    I am also noticing that LR4 is visibly slower than LR3, to the point where most sliders don't slide evenly, but jump in increments unless I move VERY slowly.
    I've watched the processor load using resource monitor: it is not peaking over about 65% during slider actvitivity.
    I have an Intel Core2 Quad CPU Q9550 @ 2.83GHz with 8 gb of ram.

  • How to find the select statement has written all selected values into text

    Hi,
    I am using form6i. i am selecting a set of values from database tables based upon some user parameters and writing into the text file using Text_io.put_line . In this case how we can make sure that the text fille contains all the data what we are selected from selected statement. somebody told that there might be chances of aborting of data while writing into the text file. is there any way to fild out the selected statements has written all the selected fields and corresponding output into the .txt file.
    Please suggest me.

    somebody told that there might be chances of aborting of data while writing into the text fileWhat kind of "chance" does that somebody refer to?
    If you want to verify if the number of records (lines) in the file matches the number of records from the cursor, you could re-open the written file in read-mode and count the number of lines by reading one by one, then compare the number of lines with the number of records from the cursor.

  • Error message: "Unable to prepare the selected file for editing"

    There is another similar post. <br /><br />I have imported a bunch of Nikon NEF raw files into Lightroom. I can work them without any problem, but when I right-click the image to edit it further in Photoshop CS3. I get this message:<br /><br />i "Lightroom was unable to prepare the selected file <filename.NEF> for editing. It will not be opened."<br /><br />Photoshop has no trouble opening these NEF files by itself, but Lightroom can't hand it them off. Anyone know why this is? Nothing I can find in the help file or elsewhere here.<br /><br />Stan

    Sean, if they are off-line, would any of this Xmp stuff make any difference? Don't they need to be brought On-lie to edit? And where would the Xmp's go with them off-line?
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
    http://donricklin.blogspot.com/

  • LR 3.3 "unable to prepare the selected file" for plugin

    OK - using LR 3.3 and trying to edit an image in an external plugin and getting this error message:
    Lightroom was unable to prepare the selected file at [file name] for editing.
    It will not be opened.
    1) Image can still be adjusted and printed in Lightroom
    2) FIle name and path are correct
    Possible source of problem:
    3) Last week I renamed the volume and had to go through all my directories and find missing files. I did that.
    4) I've also optimized the catalog hoping it would restore things, but nope.
    5) I can edit other files found on this volume (an internal hard drive) and same top-level directory with this plugin.
    H*E*L*P

    Resolved. File permissions had somehow been set to read-only. Now if only I could figure out why that happened...

Maybe you are looking for