Lightroom 4 not loading onintel macbook with 10.6.8

I loaded lightroom4 on my mackbook intel duo running 10.6.8. I have 2 G ram and enough disk space. It seems to meet the posted requirements. The graphic card is a Intel gma950. When first loaded, I get the message " Lightroom 4.app will not run on this type of mac"

Momiller77 do you have a 64-bit processor or 32-bit? The system requirements at System requirements | Lightroom indicate the need for a 64-bit processor.

Similar Messages

HT1414 I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without

I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iTunes

I hope that you can see this response. The forum software is acting quite bizarre today.
You really do want to restore with your own computer. There is an off chance that you might be able to backup first, but I really think it is a very slight chance now since you got the connect to iTunes screen. But on the chance that when you connect, it sees the iPad and allows a backup, I would to not have you wait to use your own Mac.
If you cannot create a backup, you will lose everything that you have put on since the date to the last backup. So of your last backup was three weeks ago, you will restore the iPad to the condition that it was in three weeks ago.
If you do a lot of traveling, using iCloud for backups might be a very good idea. I use iTunes primarily and I backup my MacBook Pro with Time Capsule, but I still use iCloud as a secondary backup. I don't have enough data that I have exceeded the free 5 GB that you get with iCloud, so I do use it just in case.
I can't explain what happened with the update, I can only tell you that it does happen to other users. I have never had a problem when I updated and I having been updating over WiFi since iOS 5 came out. Taking a guess, maybe an interruption in the connection - especially of you tried updating using a hotel's WiFi network, or a power surge maybe. Whatever the cause, it is most likely a one time thing. That doesn't help your situation I know, but hopefully it won't happen again.

Why will safari not load web pages with the prefix "fhp"?

Why will safari not load web pages with the prefix "fhp"?

Because it doesn't recognise them as valid addresses - just as the error message says.
Firefox is similar : Firefox doesn't know how to open this address, because the protocol (fhp) isn't associated with any program.
Where are you seeing this problem ?.

HT1529 If I do not have the macbook with me and in the bill is not writing? How to get the Serial Number true Itunes?

If I do not have the macbook with me and in the bill is not writing? How to get the Serial Number true Itunes?

https://support.apple.com/kb/HT2526

When turn wi-fi website is not loading fully but with internet cable is loading

when turn wi-fi website is not loading fully but with internet cable is loading how caa i solved this problem?

Hi,
What is your machine and its Operating system ? Do you have wireless network at home ? If yes, have you setup the connection between your laptop and the router yet ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Photoshop CC not loading on MacBook Air with Mac OS 10.9 (Mavericks)

Photoshop CC is not loading at all after updating my 2013 MacBook Air with Mac OS 10.9. The error message (in German as I am using the German version) says "Konnte Photoshop nicht initialisieren da ein Programmfehler aufgetreten ist" ("couldn't initialize photoshop since a program error occurred") . Application launcher is updated to the latest version and deinstalling and re-installing photoshop CC didn't change anything. What can I do?

Hi michelangelo52,
Please refer the KB : http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html

Lightroom 5 not loading .xmp sidecar files during import

I have a folder of RAW images that also contain .xmp sidecar files that I am trying to import into Lightroom. The images import with no issues but it appears that Lightroom is ignoring the sidecar files since none of the metadata they contain are appearing in the catalog. I am seeing the same behavior when I take the same RAW/.xmp files and first run them through the DNG converter and then import the DNGs into Lightroom (again, no metadata). I have tried to update the catalog by both writing to file as well as reading from file but nothing I do will get the metadata read into the catalog. Anyone have any ideas? Thanks...

Rob Cole wrote:
Whoops - I just realized you had also tried force-reading metadata after import.
If that doesn't work, then either the xmp sidecar files were not named properly, or something in them Lr not liking (presumably)
If you can make a copy available (of original photo file + xmp sidecar, e.g. zipped) I can have a look.
PS - Lr will only read DNG sidecar if newer than DNG (and hence embedded xmp).
Rob
Thanks Rob. New to these forums so still trying to feel my way through it. I tried both using the context menu as well as the metadata menu option for a selected image with no success. I have tried this with an image I had previously converted to a .DNG and the metadata does not load into the catalog for those either. However, I can't determine that the .DNG version had the metadata loaded or not. I don't know enough about the file structure or have the tools to peer inside to verify. The .zip file is 12MB in size so I am unable to insert the RAW file but I can't figure out how to attach to .xmp file either. Will continue to research to see how I can do that...

Lightroom 5 not loading older images correctly

I'm going through older photos that were edited elsewhere and then added to my catalogue as DNGs while I was using Lightroom 4. Now as I go back, they are not loading correctly with my edits, but they were on Lightroom 4. Did something happen during the upgrade? Or is there a way to get them to register my edits?

You have just described a 2 step process.
Import photos into LR4
Convert LR4 catalog to LR5 (side issue: exactly how did you do this, what exact steps did you follow)?
So when did the editing happen? Before or after step 1? Before or after step 2?
In your LR4 catalog, do the photos appear with edits?

Cds will not load on MacBook

CDs of any kind will not load. After about 10 seconds, they are ejected. The CD icon never shows up on the desktop, and I have this machine configured to show CDs, if loaded. I have resorted to using an air-duster aimed at the slot to see it it is a dust problem, but no improvement. I have never used a cleaning disk as I understand they can do more harm than good. Is there any way to verify if the optical drive needs replacement? Full particulars on my MacBook follow.
Model Name: MacBook
Model Identifier: MacBook3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 800 MHz
Boot ROM Version: MB31.008E.B02
SMC Version (system): 1.24f3
Serial Number (system): W8748*Z62
Hardware UUID: BF8BD338-C435-58C8-8BE9-8C271A419DA0
<Serial Number Edited by Host>

Sorry, no idea. I'm just a wanderer from the desktop fora. If the computer is out of warranty you could investigate doing it yourself. Start at www.macsales.com where you can get an idea as to component parts, and they also have instruction videos for many jobs.
Before you give up, read the following since I have memories of perhaps optical drives being part of them:
[Resetting PowerBook and iBook Power Management Unit (PMU)|http://support.apple.com/kb/HT1431]
[Apple Portables: Resetting the System Management Controller (SMC)|http://support.apple.com/kb/HT1411]
Since neither CDs nor DVDs are being recognized it could be something else potentially cleared up by resetting hardware (as above).
Message was edited by: Limnos

Syncing apple notes on my MacBook with iPhone and iPad.Mac ap store that will sync easily with apple notes?

im trying to sync notes on my iPhone and iPad with my new MacBook pro.
Although I don't see the generic "apple notes ap" on the macbookpro. Any suggestions?

eww,
When I first opened the mail i didn't have the option of the "go to" and choose notes because i hadn't created the mailbox. I 've only had the mac for 3 days. None the less I created the notes mailbox which apparently falls under "Reminders".
Will this "notes mailbox" eventually sync with my ipad and iphone. I have created several notes on the ipad but still don not see them in the "notes mailbox" on my mac?
Thks very much!

K7N2G will not load windows xp with any type of dvd/cd drive installed?

This is on my old computer, the specs are as follows
k7n2g
athlon 2600+
radeon 9700 pro
Caviar SE wd800
1gb samsung ddr333
It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
Thanks
Chris
PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
two Opteron 250 90nm
2gb 2-3-2-6 Corsair Reg/ECC DDR 400
Tyan Thunder K8WE
1x BFG 7800GTX OC (one for now)
Audigy 4 Pro
Seagate Cheetah U160 10k 73.4 gb
Atlas V U160 18.3 gb
Lite on Dual Layer burner

Your Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
So let us get this straight.
This system used to work fine? Yes? Then what prompted you to reload the OS?
You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
A little more history might prove useful in helping us to give you better suggestions.
Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
+3.3V@22A, +5V@21A, +12V1@18A, +12V2@16A
Is this correct?
Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
Did you try clearing the CMOS and then initialize the default settings?
Do you have a cheap AGP card to try instead of the 9700?

Applet is not loading second time with Jre7 u9

Hi,
I have found serious problem with Jre7 update 9, Java Applet is not loading in 2nd time, it loads properly first time but in 2nd time it hangs for infinite time.
Interesting part is same applet works perfectly with Jre7 which have stability & security issues.
Is this is cache problem or I have to do some configuration changes?
I have to delete everytime cache resources from Java Control Panel to run applet.
See logs for more details:
cache: Initialize resource manager: com.sun.deploy.cache.ResourceProviderImpl@966905
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.access value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp,org.mozilla.jss
security: property package.definition value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp
security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,com.sun.javaws,com.sun.deploy,com.sun.jnlp,org.mozilla.jss
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@920ee7
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@1e74d83
security: Blacklist revocation check is enabled
security: Trusted libraries list check is enabled
network: Cache entry found [url: http://subdomain.domain.com/application/applet/myapplet.jar, version: null] prevalidated=true/0
cache: Resource http://subdomain.domain.com/application/applet/myapplet.jar has expired.
network: Connecting http://subdomain.domain.com/application/applet/myapplet.jar.pack.gz with proxy=DIRECT
network: Connecting http://subdomain.domain.com:80/ with proxy=DIRECT
network: Connecting http://subdomain.domain.com/application/applet/myapplet.jar.pack.gz with cookie "JSESSIONID=C45ABD26D27224F74EA675A2CB7B08A4; JSESSIONID=54898DDD281CFF281956381DE51C07B6"
network: CleanupThread used 445274 us
network: Connecting http://subdomain.domain.com/application/applet/myapplet.jar with proxy=DIRECT
network: Connecting http://subdomain.domain.com:80/ with proxy=DIRECT
network: Connecting http://subdomain.domain.com/application/applet/myapplet.jar with cookie "JSESSIONID=C45ABD26D27224F74EA675A2CB7B08A4; JSESSIONID=54898DDD281CFF281956381DE51C07B6"
network: ResponseCode for http://subdomain.domain.com/application/applet/myapplet.jar : 304
network: Encoding for http://subdomain.domain.com/application/applet/myapplet.jar : null
network: Disconnect connection to http://subdomain.domain.com/application/applet/myapplet.jar
Regards,
Deepak Garg

Hi RogerL,
Jre7 update10 is working fine, currently I am doing testing my applet with Jre7 update10.
Very Strange behaviour same applet working fine with Jre7 & Jre7 update10 but it is not working with Jre7 update9 official release.
I am very keen to know the exact reason or what's new in update 9 & update 10.
Thanks a lot.
Deepak Garg

Wi-fi not working on macbook with version 10.8.2

wi-fi not working on macbook pro with version 10.8.2

Ooops - that's not a good sign. I would first restart the computer and then hold down the option key while accessing the Apple menu and select System Information... then go under Network>Wifi and see if you've a card installed:
Interfaces:
en1:
Card Type:    AirPort Extreme (0x14E4, 0xD6)
Firmware Version:    Broadcom BCM43xx 1.0 (5.106.98.100.16)
MAC Address:    68:a8:6d:52:c5:70
Locale:    FCC
Country Code:    US
Supported PHY Modes:    802.11 a/b/g/n
Supported Channels:    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:    Supported
AirDrop:    Supported
Status:    Not Associated
Should look something like the above.
If you don't see a card, then somethings up with your hardware that can likely only be fixed (or at least diagnosed) by an Apple tech.
Good luck,
Clinton

Film Not Loaded On Chrome With Flash 11.8.800.64

When i was going to play a game it said Film Not Loaded and i re-loaded the page more then 10 times and it didnt work. I followed some tutorials on how to fix it but none of them worked. My system is Win7 64-Bit. Who can help me?

See: http://forums.adobe.com/message/5560631#5560631
Also, check Tools>Addons to be sure the latest plugin is enabled

Mac OS X Lion does not load on MacBook (late2007)10.6.8

Hi, Anyone who is having this issue. I have 2 MacBooks ( white body late 2007) upgraded with Snow Leopard and later updtaes of Snow Leopard up to 10.6.8.
Now I have bought Mac OS X Lion, and I ghave tried to load Lion onto these machines without any succes. Anyone with this experience ?
Thanks for helping me out.

First, just to make sure, is your machine a Core 2 Duo (the number '2' being the most important)?
Then, how much RAM do you have? 2 GB is the minimum; however, that is truly a minimum - you'd be much happier with 4 GB.
And, last, the download is almost 4 GB - with my cable connection, it normally takes at least one hour, but i've already had it take almost 3 hours (entire neighborhood must have been downloading something....). I've heard of some people reporting 10+ hours of download time if the connection was bad, slow, or kept timing out.
So, you need to give it plenty of time. And, it is not installing during the download - it is only downloading. When done, you will get an installer window. At that point, I suggest that you dismiss that and go to your Applications Folder. Copy the installer somewhere safe so you don't need to do it again (you can also use it on your other machine). After that, double click the installer and click on install.

Lightroom 4 not loading onintel macbook with 10.6.8

Similar Messages

Maybe you are looking for