Lightroom 4 video playback has wrong colors

And so does the export. I'm on a Mac.
Premiere is fine, but not Lightroom.

Idealy, questions on Lightroom 4 beta should be asked on the forum provided at http://forums.adobe.com/community/labs/lightroom4 I think you'll have more chance of an answer over there.

Similar Messages

Lightroom 5: Video playback trouble - and workaround.

I am currently trying the trial version of LR5 to decide if I should buy LR5. I am a long time user of Photoshop/Premiere Elements with 9000+ pictures and 600+ videos (AVI and HDV formats) so seamless catalog conversion is important to me. Here is my finding with a catalog conversion issue.
I converted my Photoshop/Premiere elements 9 catalog into an LR5 catalog but had problems with playback of the video files from the thumbnails in grid view.
Some of the video thumbnails would playback when double-clicked others would not. I then realised that the thumbnails that worked, had the length of the clip displayed in the lower left corner of the thumbnail, whereas those clips that did not work had a generic video icon (see attached screen dump) in the same place.
If I double clicked a thumbnail with the generic video icon, the view would change to Loupe view, and the playback bar be shown, but the video would not play and the bar was "dead". If I clicked the thumbnail again, the view would toggle between Grid and Loupe view. The only way to resume video playback, was to close LR5 and restart the application.
Video clips with the duration shown worked flawlessly.
By the way - the thumbnails with the generic video icon would play using "Open Video In Default Player" when right-clicking on generic video icon, but not from within LR5.
Each time I restarted LR5, I saw that the number of video files with the duration shown/updated increased every time but never completed even after leaving the pc for several hours. It has taken 20-25 close/start of LR5 to get through all the video files and apparently updating the db-entries in the LR-catalog.
I hope this is useful info for others with the same problem.
Br.
Michael Eriksen
Copenhagen, Denmark
--------- My system ------------
Lightroom version: 5.0 [907681]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 3,1 GHz
Built-in memory: 3959,0 MB
Real memory available to Lightroom: 3959,0 MB
Real memory used by Lightroom: 251,6 MB (6,3%)
Virtual memory used by Lightroom: 224,4 MB
Memory cache size: 0,0 MB
Maximum thread count used by Camera Raw: 2
System DPI setting: 120 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080

Moving this discussion to the Photoshop Lightroom forum.

Fullscreen Video playback shows wrong line at top and bottom

I have a very annoying problem for years now, it happens with various Windows-OS (XP, Vista, Win 7) and no iTunes/Quicktime update changed anything ever:
If I watch my iTunes Video clips (all bought in the iTunes store) in fullscreen the first (header) line of the video playback is displayed at the bottom and vice versa. You need to watch a video with different colors in the upper and lower part, then the error is quite noticeable.
I use ATI Graphics cards.
Anyone knows a solution?

Thanks for your quick answer, however I did try that and the problem
remained. Also, DVD's that I buy in the store play fullscreen without having
to change any settings to the player nor the TV so way should it now? (just
wondering)
The only way to get it to play full screen is set the TV to "cinema 1"
instead of "16:9". But then it looks like the image is blown up.
I'm not sure if it's relevant but the TV is a widescreen LCD HD flatpanel,
DVD player is a standard (cheap) one.

Itunes video playback has green screen

When I try to play videos in Itunes all I get is a green screen. I have tried almost every fix I have found but I can't seem to fix it. My computer is a Dell Inspiron 5160 running XP. My video driver is a XGI VolariXP vs.2.116DELL. My hardrive just recently corrupted, and I can't remember how I got rid of the green screen before.

Everything seems to be pointing towards the video drivers ... it might also be worth checking if you're getting similar sorts of green screens with your WMP, as per the following Microsoft document (they've got some suggestions we haven't looked at yet):
[The screen may appear black or green during playback when the Windows Media Player control is embedded in a Web page|http://support.microsoft.com/kb/909554]
... but, I've also been checking on the Dell website, and it looks like there could be some strange issues that crop up for folks if the drivers on your Inspiron model are reinstalled in the wrong order after an operating system reinstall:
[Technical Support for Inspiron 5160: How to Download and Install Drivers in the Correct Order|http://support.dell.com/support/topics/global.aspx/support/dsn/document?c =us&docid=1A0C0937D62A8739E0401E0A55174744&doclang=en&l=en&s=gen]
... so I'm not sure which of those two directions it would be most prudent for you to pursue next. (We're pretty much at the extreme edge of my technical competence with video things now, and I don't want to put you wrong, Sportsman.)
So, if nobody else here drops by to contribute any additional advice, I think it might be a good idea to check in with a Dell technician for an opinion on what to try next.

The sound on my video playback has disappeared

I recorded a few videos on my iPhone 3GS this afternoon. When I played them back they were all working. However, a little while later (not more than a few minutes), I played back one video back and the sound has disappeared! The video was of the flypast at Buckingham Palace today in honour of the Queen's Diamond Jubilee. Please help! Many thanks.

you can try doing a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up, then try the video again.

Choppy Video Playback with new update 7.5.0.20

Well, here we go again. This latest itunes update is not up to snuff. My video playback has hit rock bottom.. And worst of all, my cpu usage is thru the roof. What the heck dude. You know, I talk to my buddies that own MACS, and of course they never have a problem with their freakin itunes. This has happened before, about a year ago. You can check the video reviews on Battlestar Galactica. I uninstalled and reinstalled, and NADA!!! Same ol' crappy playback. This was not an issue with the previous version. I even performed a system maintenace on my laptop just to make sure the CPU vents weren't clogged with dust. I know that Apple would prefer that the whole world owned a freakin MAC; but for Pete's sake, I am paying them to download content!!!!Paying!!!!!!! Give me something I can look forward to. Dread is what I feel everytime they announce one of their cute updates.

Me too. All I get is audio and a green screen when i try to play a video(that i *paid for* in some cases). I asked a question here a year ago and have yet to get an answer to!

No Video Playback Whatsoever on iPhone 6 Plus

I have an iPhone 6 Plus and all Video playback has recently stopped working. When I say 'all', I mean every possible way of playing a video on the iPhone will not work:
Video's in my photo library don't playback (the iPhone will temporarily freeze when I click on the video, and then it will just display the thumbnail, no playback).
All my Apps cannot play video (Safari, Chrome, Youtube, Plex, etc). Strangely Youtube will show as playing, but you only get audio and a black screen.
If a restart my phone, video playback will magically start working again, but after a few minutes it will stop working (so essentially I have to restart my phone every time I want to watch a single video).
This problem seems to have started when I upgraded to iOS 8.1.
Anyone else have this problem and managed to fix it?

no SIM card installed problem on iPhone 6 plus . There is three time one is erase my phone . Second time restart my phone . Using ios 8.1 now I can't do anything . When I do Reseat all setting there is always no SIM card installed . My sim work at my pad . My phone sim tray are normal please help how can I do .
Can I do complaint to warranty?

Netflix says"Video Playback Error Your device has a hardware issue, which is preventing Premium Video Playback. Contact Apple Support for more information. Error Code: S7363-1261-FFFFD000" What is wrong?

My mac is working fine. No noticeable problems. Then went onto netflix everything was working apart from the watching of the film and it popped up
"Video Playback Error Your device has a hardware issue, which is preventing Premium Video Playback. Contact Apple Support for more information. Error Code: S7363-1261-FFFFD000".
Not sure what is wrong but would appreciate any help

Netflix not working with yosemite
Re: I think there is a hardware issue with my computer and i am not sure what to do it won't let me play netflix
Netflix streaming gives Error Code: S7363-1261-FFFFD000

My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Printing in Lightroom Produces Wrong Colors

I have searched these forums and found a couple of topics that have to do with incorrect or wrong colors being printed by Lightroom but none of the suggestions proposed seemed to help. So, I think that I have something else going on that is causing me problems.
The vital statistics: I am using Lightroom 1.4.1 on Vista Home Premium with an HP C7280 All-in-One printer. The pictures I am trying to print are DNGs converted by Lightroom. When printing in Lightroom, I select the option to have the color managed by the printer.
Basically, any picture that I print from Lightroom looks darker than the original. So, I tried a couple of different tests to try to find out what is going on. I exported a picture to a jpeg and printed that with the Microsoft Office Picture Manager and it printed fine.
I was curious what would happen if the photo was printed from Photpshop CS3. So, I created a copy of the DNG file from Lightroom and edited it in Photoshop. I printed the picture from Photoshop with the color set to be managed by the printer, and Photoshop also printed the photo with a dark look. I then changed the Color Handling to "Photoshop Manages Color" and the Printer Profile to sRGB, and the picture printed perfectly.
In addition, I tried printing jpgs from Lightroom, and I got the same dark results. Any suggestions as to what is going on will be very much appreciated. Thank you in advance!
Michael

Unfortunately, Lightroom cannot print to this specific printer without tricks. The reason is that HP does not provide color management in the driver (which is why you have to use sRGB in Photoshop - shudder!) and does not provide icc profiles for it. This is HP not providing good drivers for their consumer-oriented printers, and Lightroom expecting at least reasonably modern printer drivers. Photoshop will print to anything by using the working space fall back that really is a hack. Unfortunately, Lightroom does not provide the same hack. In your case, there is a trick you can use, which is to find the "HP color Laserjet RGB" icc profile that HP ships with their laserprinter drivers. It is just an sRGB profile masquerading as a printer profile. If you use that in the profile field in Lightroom, it
should work.

Display color profiles causing gamma shift in video playback

I recently got a new monitor - Dell U2713H - to use with my macbook pro. If I use anything other than the default color profiles the gamma will shift after about 7 seconds during video playback to something much cooler and dimmer. it stays that way until the video is paused and then reverts back to what it should be. This problem doesn't happen if I stick to the default display profile. Any ideas?

Mac OS X (10.6.8)
If your profile is correct, you should re-post in the Snow Leopard forums instead of Mountain Lion's.
If profile is incorrect, please correct so that you will get the proper troubleshooting solutions.

Am I the only person who has problem with video playback ?

I'm having problems with the latest nvidia driver and it seems that nobody wrote about it on the forums.. After installing the latest nvidia driver (169.07-1), the video playback with xv selected will be played in purple and blue colours.. Generally red will not be shown.. So human faces are colored with a combination of purple and blue.. Everything is normal on the other hand.. Sound works perfectly, the movie can be watched smoothly even on fullscreen.. With x11, all players can show the colors but...
1) The movie quality in Totem is very bad then...like the image is gathered together by 3x3 pixels..
2) mplayer shows everything fine but it can't get fullscreen..
I created a nautilus script for a workaround that let's me watch the movies with fullscreen using the -fs -zoom options..
But this problem is really annoying..

1.0rc2, with some things disabled that are enabled in the Arch package (lirc, samba, and that live-media thing).
$ pacman -Qs mplayer
local/mplayer-custom 1.0rc2-1
xvinfo:
X-Video Extension version 2.2
screen #0
Adaptor #0: "NV17 Video Texture"
number of ports: 32
port base: 355
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x22
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
number of attributes: 3
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
"XV_ITURBT_709" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
"XV_SYNC_TO_VBLANK" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
maximum XvImage size: 2046 x 2046
Number of image formats: 4
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
Adaptor #1: "NV05 Video Blitter"
number of ports: 32
port base: 387
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x22
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
number of attributes: 2
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
"XV_SYNC_TO_VBLANK" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
maximum XvImage size: 2046 x 2046
Number of image formats: 5
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x3
guid: 03000000-0000-0010-8000-00aa00389b71
bits per pixel: 32
number of planes: 1
type: RGB (packed)
depth: 24
red, green, blue masks: 0xff0000, 0xff00, 0xff
xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#Section "ServerFlags"
# Option "XkbDisable" "true"
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "ServerLayout"
Identifier "TV Layout"
Screen 0 "Screen_TV" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
#Load "evdev"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "logiitc"
Option "XkbLayout" "se"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
EndSection
Section "Monitor"
Identifier "Acer AL1923"
#HorizSync 30.0-69.0
#VertRefresh 60.0-75.0
# calc: (x|y)pixels * 25.4 / dpi
#DisplaySize 336 269 # 96 DPI @ 1280x1024
Option "DPMS"
EndSection
Section "Monitor"
Identifier "TV"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Device"
Driver "vesa"
Identifier "VESA"
EndSection
Section "Device"
Identifier "nv"
Driver "nv"
EndSection
Section "Device"
Identifier "NVIDIA GeForce 7600GS"
Driver "nvidia"
BusID "PCI:5:0:0"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "backingstore" "true"
EndSection
Section "Device"
Identifier "Card_TV"
Driver "nvidia"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "SVIDEO"
Option "ConnectedMonitor" "TV"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7600GS"
#Device "nv"
#Device "vesa"
Monitor "Acer AL1923"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen_TV"
Device "Card_TV"
Monitor "TV"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I should probably also mention that I'm rolling my own kernel, and as such I'm not using the package from testing. Building it manually with the PKGBUILD from ABS though so it shouldn't be any difference though.
Last edited by [vEX] (2008-01-15 17:15:36)

Lightroom 4 video playback has wrong colors

Similar Messages

Maybe you are looking for