Lightroom 4 wont allow me to import presets

My computer wouldnt stop annoying me to upgrade to windows 8.1 and so finally i did and there were no warnings to backup anything as well. But after it was all finished a lot of things i had to reinstall and one of those things were my presets. I know how to normally import them but Lightroom wont let me and says that "the preset file was the wrong type of preset". it's never done this before, so i'd like to know if im doing something wrong or what the problem is. Thanks

A few details about what you are doing and what is happening would be most helpful. In particular, if there is an error message please quote the complete error message word-for-word verbatim.
Also, please tell us what camera you have and what version of Lightroom you are using.

Similar Messages

  • Lightroom wont allow me to convert RAW file to JPEG

    Hi
    I have tried and failed to export a RAW file to JPEG. When i highlight the RAW images to export i get a message, "source file are offline or missing". Does anyone know what this means and how can i save RAW images to JPEG?

    I chose to move the images to a different file when they were exported to jpeg
    Do you mean "I chose to move the images to a different file  FOLDER when they BEFORE I TRIED to export to jpeg"?
    If so, this is an unnecessary step in Lightroom, that actually interferes with you using the photos in Lightroom. Best to not move the files any more using your operating system, and use Lightroom tools such as keywords, captions and other metadata to help you segregate and organize your photos.
    To fix this problem now, either use your operating system to move the photos back to their original location, or use this: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  • Encoding .mpg? Media Encoder wont allow me to import them...

    Hello,
    I am trying to convert my .mpg videos into a video format that I can use in Camtasia...  Unfortunately, I cannot import them into Adobe Media Encoder... Any tips?
    Thanks for any help!!
    Ryan

    Use something else to covert.  I use the following for my oddball videos.
    http://www.videohelp.com/tools/XviD4PSP

  • Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?

    Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?
    Error message that it does not support cr. file

    Which version of Lightroom?
    As Hal points out, if it's pre v 4.1, you can't expect an old version of the software to know what to do with a camera that didn't even exist when the software was released.
    Given how many times a day this same issue comes up, maybe it's time Adobe changed the error message to something like "your camera is too old to be supported by this version of Lightroom. Please upgrade" or similar... 

  • Lightroom not loading custom settings and imported presets when launched

    So I read an article about deleting windows temp files and I did so with the intention of bring my computer back up to speed.
    The recycle bin has since been emptied.
    When I launch Lightroom in Windows XP my previously imported presets as well as a couple other custom settings (ID plate) don't show up. I have to re-import them everytime I launch Lightroom unless I'm opening a previous cataloge.
    Any ideas?

    Here's my entire process -
    1 - load my SD card in to my computer and import RAW files in to a file on my computer and on to an external hard drive.
    2 - remove the connection of my external hard drive
    3 - Open LR 5 - Import the files I just loaded to my computer
    4 - go to develop in LR 5 make my edits
    5 - when done or done for the day on my edits - I back up my LR 5 library and close LR 5
    6 - To start editing again - I open my LR 5 with the same library I closed the day before and here is where the hiccup comes in.
    Files are always in the same location & file names that I named them when I did the initial import to my computer and external hard drive.  I have Windows 8 OS.
    No, there were not "!" on any of the images.

  • Lightroom randomly rotates previews on import

    Hi,
    I'm experiencing some weird Lightroom 5.4 behaviour on one iMac (OS 10.9.2). After Lightroom has initially imported the files (Nikon D800 NEF) it builds previews, but some of those previews are rotated by approx 5 degrees with a white background added (see attached screenshot). It looks like it's random for both vertical and horizontal files. I've checked on another iMac running Lightroom 5 and there the files are imported like they should. Also opening the files in Photoshop with Camera Raw seems to be working ok on both computers.
    I've removed all import presets, but no luck. I've also completely re-installed Lightroom, but that didn't solve the problem.
    Does anyone have any suggestions I could try? Thank you!

    For one of the rotated images, go into Develop and open the Lens Corrections panel, click on the Manual tab and see if the "Rotate" slider is not at the neutral zero position. That screenshot looks like manual rotation. If that is the case press and hold the Shift key and the "Reset" button at bottom right will change to "Reset (Adobe)", and if you click on it does the image revert to "normal"?
    If so, you've inadvertently changed the default develop settings for that camera (and probably the ISO settings as well as it isn't happening on all images). To reset the default develop settings, click on Develop menu>Set Default Settings>Restore Adobe Default Settings.

  • Freezing in import dialog when selecting "Import Preset" FIXED IN LR3.2

    Hi all,
    I have just installed Lightroom 3 and Photoshop CS5 on my Vista Ultimate 32-bit system.
    When in the import dialog if i change any settings and click "Save Current Settings as Import Preset", Lightroom 3 freezes and after a minute displays the dialog to name the new Preset. After entering a new name for the Preset and clicking OK it freezes again! then eventually comes back.
    I'm also getting freezes when selecting a different import drive, but that only seems to happen when using the external network drives and is possibly un-related.
    I have tried running scandisk and defrag on all my drives (no change), Removing all external network drives (no change!).
    My system config is as follows;
    Windows Vista Ultimate 32-Bit 4GB RAM 2x 1TB SATA Hard Drives 3.1GHZ E8500 Dual-Core Intel CPU
    Plenty of space free on both drives (500GB in each), Swap on D: Drive and O/S on C:
    I installed by un-installing the Lightroom 2.6 copy and running the new install(in case it's relevant!)
    Lightroom 2.6 was running perfectly before the upgrade.
    Any ideas I can try?
    Thanks in advance!
    Message was edited by: drmcinnes
    FIXED IN Lightroom 3.2 Update

    No, factory presets are embedded inside Lightroom and cannot be removed.
    Well, actually, they can, but this is undocumented and you'll have to do it after each update.
    http://lightroom-blog.com/2010/09/getting-rid-of-default-lightroom-develop-presets.html

  • How to cycle through various (imported) presets

    How to cycle through various (imported) presets/ effects in lightroom without adding them to the previous effect? In other words, I want to just keep trying various presets in developer mode but when I click on different effects, it should reset and apply current effect, instead of adding/ compounding over previous effect.
    What I am doing now is Undoing the effect each time before trying next effect or preset.
    Crysis 3 Hack Cheat 2013
    http://crysis3-cheat-hack.tumblr.com

    I have downloaded very few presets, but in order to make presets useful for me I need to have them pretty specific, so all in all it adds up to a pretty long list when you list all of them. All I wanted was a way to chose what presets gets listed in the import dialog (alternatively sort them in a specific order). Whatever you name your user presets folder they get listed at the end of the list, and conversely the Lightroom default presets gets listed at the top. The way Lightroom behaves with these presets folders is very unintuitive and frustrating, one of many reasons why I have a love/hate relationship with this program, but I'll have to get back to that because I have to run now!
    crysis 3 cheat hack

  • I can import presets in LR 4, but not LR 5. Any advice?

    I can import presets into LR 4, but I cannot import into LR 5. If I right click on "User Presets" nothing happens. If I go to "preferences" and try to load from there, nothing will load.

    You normally copy the lrtemplate file directly into the user presets folder
    If you click the button in preferences (presets tab) “Show Lightroom Presets Folder” it will take you to the folder location.
    Double click on Lightroom folder
    Double click on Develop Presets folder
    You should now see the User Presets folder – you can copy or drag into this.
    If LR is still running, quit and restart.

  • LR4 - still can't include crop in import preset

    I was hoping that LR4 will be able to include cropping in import presets. 
    Still can't, very disappointing as I have to crop all images I import.

    Firillu wrote:
    I was hoping that LR4 will be able to include cropping in import presets. 
    Still can't, very disappointing as I have to crop all images I import.
    The place you should be posting to is the Lightroom 4 Beta Forum...

  • Lightroom is changing metadata on imported photos

    I imported a batch of RAW images into Lightoom 4.4 and see that a number of the images are displaying the icon warning that metadata has been changed in Lightroom although the affected images have only just been imported into the catalog and I have not made any changes to them. 130 images out of a batch of 300 are being affected.
    I have selected the affected images and re-read the metadata using Metadata / Read Metadata from File, but within a couple of minutes of being re-read, the metadata changed icon has reappeared.
    My initial thoughts were that I had changed one of the preferences and something was being automatically applied, but if that was the case then I would have expected it to be applied to all 300 images in the batch which were taken on the same day on a single camera. I've created a smart collection to identify images with metadata changed in Lightroom and find that they appear to be randomly spread through the catalog affecting both RAW images and jpegs from 3 different cameras.
    In order to exclude any changes to Lightoom preferences I may have made, I installed Lightroom 4.1 on another PC and created a new catalog using the default settings. I then imported the same batch of 300 RAW images and confirmed that the same ones displayed the warning icon that metadata was changed in Lightroom .
    Can anyone explain what might be causing this?
    The PCs are Windows 7 Professional, Lightroom 4.4 (Lightroom 4.1 on the test PC), RAW files are from Nikon D90 and D7100 cameras.
    Thanks

    I agree with most of your points:
    Points 1, 2, 3 - I agree.
    Point 4.
    yes - all of my RAW files have .xmp files associated with them as they contain the metadata and keywords I have entered via Bridge/ACR.
    Lightroom imports these details but shouldn't then be making any additional changes which need to be written back to the xmp files. This is where the problem has surfaced as Lightroom has made unknown changes to some of the photos and wants to write them back to the xmp files - see my comments below about point 6.
    Point 5.
    By installing a trial copy of Lightroom 5.3 on a different PC and creating a new catalog I avoided carrying forward any incorrect preferences etc I may have previously used - all photos in this new catalog have been freshly imported for testing. The fact that Lightroom displays the "metadata has changed" icon to the same photos as my original Lightroom 4.4 installation after importing them demonstrates that an unidentified Lightroom process is making changes to some (but NOT ALL) of the imported photos.
    The problem is identifying WHAT Lightroom has changed and the implications of these changes.
    Point 6. 
    "auto write to xmp" - This is not selected in my catalog settings as I want to be in control of when Lightroom updates the xmp files. At present I am still learning Lightroom so I don't want to accidentally write any changes back to the xmp files until I am completely sure of the consequences, hence my main work still takes place in ACR.
    Point 7.
    My current workflow choice is to continue using xmp sidecar files as per the following statement at
    http://www.adobe.com/uk/products/photoshop-lightroom/faq.html
    "Changes you make in Lightroom can appear in Camera Raw and vice versa. To complete this interactivity, changes in both Camera Raw and Lightroom need to be written to XMP metadata. This is so that each software application can recognize the other's edits."
    - but I have to be confident that any Lightroom changes to the xmp files are as a result of my planned actions.
    Point 8.
    All of the default Develop Settings are deselected in my preferences/presets and I don't have any import presets - the develop settings and metadata are set to "none".
    Do you have any suggestions on how to identify what changes Lightroom has made to the photos where it has set the "metadata has changed" icon?

  • Import Presets from ACR

    Hello together
    Is there a possibility to import existing presets from ACR into Lightroom? I tried to import, but ACR stores the presets in a different file format than lightroom. Is there a chance to import them?
    thanks for your replies
    - Daniel -

    Hi Victoria
    Good idea!! Thanks a lot!
    - Daniel -

  • Lightroom 4.3 can not import

    I'm running windows 7 64 bit and lightroom 4.3 and 4 both stop allowing me to import images after running 2 or 3 times. I've uninstalled and reinstalled the program several times with the same result each time. The program works fine otherwise, it just freezes up when I try to import

    Re-installing Lr solves a problem rarely because un-installing and re-installing doesn't touch a lot of files that are supposed to "survive" an upgrade.
    Your problem could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
    But un-installing and re-installing Lr doesn't replace the Preference file.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • Adobe wont allow me to renew my license

    Hey,
    so, my company CC got cancelled, and ever since it wont allow me to use a difference card. Customer support just send me round in circles always promising to call back, but never do. Has anyone ever had a similar problem / solution? I deseperatey need access to the software but the folks on the end of the phone really couldnt care less and dont even repsond to update to the online ticket/case system.
    Ps...should say, I'm talking about Creative Cloud.
    Thanks
    Mark

    Hi Jeff,
    many thanks for getting back to me. The error message I get is on step 5, it simply says "We'll look into that and get back to you" followed by "you should get an email from us in the next business day etc etc" I've tried this a few times using different cards, both personal and company cards, debit and credit. My case number is #0211430930.
    I've spoken to numerous people in customer suppport but all they say is they'll escalate it, but no one rings back.
    Thanks again for your help.
    Mark

  • My problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set sav

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/986549 /questions/986549]''
    my problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set save downloads to my e drive....but still firefox keeps saving them to my c drive....i have 4 internal hard drives in my rig....and have tried saving downloads to them all.......why this is happening i cant understand....i have tried lots of suggestions....and have re-installed firefox multiple times

    hello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''E:\Downloads'') and set this as default location for downloads...
    also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899].

Maybe you are looking for

  • Letter of Credit issue

    Hi Friends, I'm trying to iimplement Letter of credit for our customer. I'm creating a sales order and giving the reference of the Letter of credit(U -irrevocable unconfirmed) at the line item level. LoC value is 10 lakhs INR and SO value is 60,000 I

  • Photoshop CS5.1 "Could not complete the save command because there is not enough memory (RAM) - HELP

    Hi, I use Windows 7, Photoshop CS5.1 often pops up with "Could not complete [command] because there is not enough memory (RAM)."  I have increased my performance preferences to (1451mb) 90%, however I have not restarted Photoshop as I want to try and

  • ITunes launched with Error 13005

    Hi, I don't know if anyone has come across this problem before.  I have been using my iTunes library on an external drive so that I can use it between my Mac Pro and my MacBook Pro.  Both macs have Lion 10.7.3 and iTunes 10.5.3. Today my iTunes has b

  • MAJOR Ipod Mini Issues!!! HELP PLEASE!

    Oh My~lanta! I am just about at my wit's end w/ this too!!! I'm experiencing the same problems although it seems like everyday I get a new error message!!!! My computer crashed back in December and ever since, my IPOD has not been the same. I thought

  • Ref cursor argument in where clause

    Env: ORCL 9.2 I have a func that uses the parameters in a where clause and returns a ref cursor as result. That works fine. I want to create an overloaded func that replaces one argument with a ref cursor. (instead of accepting a single value as an a