Lightroom 5.0 renders SD card unusable till formating is done in camera

I remove an SD card from the Camera (canon 60d) Load it into my card reader and have it read by lightroom 5.0 and load the pictures into the catalog. I remove the card from lightroom and place it back into the camera. The camera indicates the card is not readable. However formating the card makes it usable. Lightroom 5.0 renders the card unreadable!

I did what you suggested regarding removing the card per procedure and it did not make a differance.
there is a problem!
I tested the problem out with two computers on which I have Lightroom 5.0. I used the card in a Canon 60d and Canon 5d mark III and had the same issue.
What Happens is that once lightroom reads the files it writes onto the SD card device something that makes the card unreadable to the camera and you get an error message "Cannot create folder"
Did not have that problem with Lightroom 4.0. The problem Started after I upgraded to 5.0.
Note that the SD card can be removed from the camera and placed into the computer and it will be OK in the computer, unless I elected to do the format in the camera.
You will probably need a dump of the FAT table to see what switch was turned such that the card becomes unreadble by the camera.

Similar Messages

  • Lightroom suddenly stopped rendering previews

    I've been using Lightroom since v1 and have been using v3 since it was released.  All of a sudden tonight, while working on photos that were already in my catalog, Lightroom has stopped rendering previews and is much slower to operate.
    I've optimised my catalog, I've tried purging my cache, I've rebooted etc.  Nothing I've done is helping, if I zoom in in Library view I just see a blury outline that is the existing thumbnail.  Some of my other images don't even have thumbnails anymore.  If I go to Develop view it behaves normally, it's just Library view that seems broken.

    I'd purged the CameraRaw cache, but after no success I ended up deleting my entire "Lightroom 3 Catalog Previews.lrdata" directory (which freed up 30GB of space and took over 10 minutes at the command line).
    Fingers crossed it seems to have resolved my issue... certainly on relaunching Lightroom it's now recreated this folder, hammered my CPU and successfully created new thumbnails for the folder I was viewing in Lightroom.  It's a little concerning just how much it hammered my CPU (100% for about 5 minutes, still sitting at 75% now after nearly 10 minutes) when I was only looking at a folder with 23 images in it... it was also hammering my Lightroom/System disk for the first 5 minutes, but not the disk with my photos on it.
    Oh well, will see if it happens again and I might start to manually delete the previews folder semi-regularly.

  • I am willing to buy a i mac 21" ,i will use it to edit photos  using photoshop cs6 and lightroom 4  is the graphic card 512mb will be enough for my work ? wich one ishould go for thanks

    i am willing to buy a i mac 21" , i will use itfor photo editing using photoshop cs6 and adobe lightroom 4 , is the graphic card will be enough ? any recomandation  , wich i mac should i buy ,thanks for your help.

    Mercury Graphics Engine
    The Mercury Graphics Engine (MGE) represents features that use video card processor, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects, and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html

  • Do I need to tell Lightroom to use the Graphics Card in my new laptop?

    HI!
    I have a new laptop and have successfully transferred my pics, catalogue and LR settings across. 
    It has better specs than my last one, including a decent (I think!) dedicated graphics card.  I have always had integrated graphics before so am not sure how this works.  Do I need to tell applications, such as Lightroom, to use the graphics card, or will this be automatically be done by the software/operating system?  If I do need to do anything, is this in each software (like Lightroom), the computer settings, or in some third party control software?
    Thanks for your thoughts.

    Thanks for that.  That seems a shame, although hopefully the increased CPU will help it run more smoothly anyway.
    Do you know off hand whether I would need to do anything for other programs with regards to the graphics card or is everything automated?
    thanks again

  • Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • My iPad no longer detects my memory card reader to transfer photos from my camera?

    My iPad is no longer detecting my apple memory card reader to transfer photos from my camera to my iPad 2

    You could try closing the Photos app completely and then re-open it to see if that makes a difference : from the home screen (i.e. not with Photos 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Photos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Are you adding the photos yourself to the card via a computer, or is it straight from a camera ?

  • Media Card won't format

    I just got the blackberry curve, 8330, and bought a media card. I inserted the card and have been trying to format it, but all it does is freeze my blackberry. is it a bad card? what am I doing wrong here?

    You could have a bad card.  Try formatting it on a pc and see what happens.
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message

    I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message that the files are offline or missing??

    Just for background, in what format are you exporting your images?  Also, are you able to export them to your hard drive in your chosen format?  I haven't tried exporting directly to CD, but if you're able to export to hard drive and copy to CD, that may be one solution.

  • Small CF card reader that works with the iPad Camera Kit?

    I'm looking for a small (not much bigger than a CF card) CF Card reader that works with the iPad Camera kit (USB piece) - Anyone know of one?
    All the ones I see people suggesting are big and bulky (made for a desktop). I know there are many smaller ones, but that the iPad camera kit doesn't work with everyone. Anyone know one that works with it?

    My set up, quite compact for travel, this is a no brand version but I have seen other ones branded Integra or something similar.
    http://farm5.static.flickr.com/4029/4713475185b52dae86bdb.jpg

  • How do I unprescribe from FIT Radio app. I tried, but it keeps charging my card every month. I DON'T want it anymore. Can you please help me stop this issueand cancel it completely.

    Hi my name is Natalia R. I had subscribed to FIT Radio, and got charged monthly. Now, I do not want the app anymore. I have tried canceling it, but it does not allow me. How do I unsubscribe from FIT Radio app. I tried, but it keeps charging my card every month. I DON'T want it anymore. Can you please help me stop this issue and cancel it completely without any further charger to my card.
    Thanks,
    Natalia R.
    <Personal Information Edited By Host>

    The following may help: Manage your auto-renewing subscriptions - Apple Support

  • After the update to Lightroom 5.7, the profile of my lenses have disappeared in the camera calibration, how can I import them again because I gave you mine Extra gespeicher. I'm working on a PC.

    After the update to Lightroom 5.7, the profile of my lenses have disappeared in the camera calibration, how can I import them again because I gave you mine Extra gespeicher. I'm working on a PC.

    Can we see a screenshot that includes the filename you're viewing with its extension and the camera Make list?
    What is almost always the case when someone says they are missing most of their lens profiles is that their current image is not a raw file.  It doesn't matter whether you shoot raw, it matters what the current images is.  Maybe it is an exported JPG or a Edit-In-whatever result file that's a TIF or PSD or JPG. 
    Here are examples of the screenshot that I'm asking for:
    Raw files show 24 items in the Make list:
    While non-raw files have only 9 items + None in the Make list:

  • I recently bought full edition of Lightroom 5 for my Nikon D610 but when i connect my other camera, Nikon D3100 for editing my NEF files it says not supported files.What am i doing wrong?

    I recently bought full edition of Lightroom 5 for my Nikon D610 but when i connect my other camera,Nikon D3100 for editing my NEF files it says not supported files.What am i doing wrong?
    Thanks in advance

    Often, this error message means that you have used some version of Nikon software to transfer the photos to your computer, and this has corrupted the files. There is a fix which uncorrupts the files at http://www.sno.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
    But you said you get this message when you "connect my other camera Nikon D3100", the key word being "connect", and this doesn't really fit the description I just gave. This error message normally happens after you have transferred the photos to your computer via Nikon software, not when you connect it. So ... maybe you need to explain a little more ... what exact task (what menu options, what are you clicking on, what are you trying to do) when you get this error.

  • HP-625 laptop when you install any (full or empty), flash card reader to format it asks and then ask

    HP-625 laptop when you install any (full or empty) flash card, card reader to format it asks and then asks opyatt otformotirovat. that make the laptop under warranty until 01/29/2012

    Please identify your notebook with the p/n on the barcoded sticker on the bottom and state your operating system.
    I suggest that you install the essential System Updates for Window 7 for your notebook if your OS is Windows 7 32 or 64-bit.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I have received an itunes gift card for $$$ from someone I don't know and am afraid to download view the card.  has anyone else received such?

    I have received an itunes gift card for $$$ from someone I don't know and am afraid to download view the card.  has anyone else received such? 

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Note:  iTunes Gift Cards are only Valid in Country of Issue.

  • My apple ID acct was updated this morning, and it wasn't me.  (credit card info).  What was done to my account?

    My apple ID acct was updated this morning, and it wasn't me.  (credit card info).  What was done to my account?

    This was the email content:
    Dear Crystal Stewart,
    The following changes to your Apple ID ([email protected]) were made on May 28, 2014 at 5:26:47 AM (GMT):
    Credit card
    If you need additional help, contact Apple Support.
    Apple Support

Maybe you are looking for

  • Delete all-day events in calendar

    Hi, The iCal on my MacBook Pro and iPhone syncs all-day events and now I have hundreds of duplications appearing. Is there a quick way to delete all the repeated entries. It takes forever to do it manually. Many thanks, Trond

  • Reason beat tempo not syncing with Logic Tempo???

    Hi, Made a beat in Reason 5 Exported loop at 137 bpm and saved to external hard drive. Imported loop into Logic with Logic tempo set at 137 bpm. Set the metronome on for recording. Pressed record and and beat & metronome are out of sync. I used beat

  • Attach Movie Clip to ScrollPane

    Hi I tried to attach movie clips to scrollPane using attachMovie but could not do it I tried the following code: sp.contentPath="emptyMovieClip" sp.content.attachMovie("boxesRow","boxesRow1",1) trace(sp.content.boxesRow1) Im able to trace the sp.cont

  • Adapter not running

    Hi there! I'm trying to create a simple Delete User process task, but after configure it (well configured, I guess...), when I try to Revoke a user, the adapter doesn't even fire, nothing happens and the Task Status goes to "Cancelled". I can't track

  • Opening Roles in the same Window?

    Hi All, I have installed ESS for a user. The particular role is displayed for the user too. But what happens is that...whenever the user clicks on the underlying worksets, a new window is coming, I want to get the opened in the same window......what