Lightroom 5.2 and Mavericks Lights out bug with dual monitors

I installed OS X Mavericks on my iMac which has a second NEC display connected and that I use as my main display. When I activate "lights out/lights dim" pressing "L" on the keyboard my primary display (NEC) doesn't change at all but the secondary display (iMac) is the one that dims the lights on the interface. Makes no difference if I have the secondary display active as a second screen for Lightroom or not. Lights out/dimm dosen't work on my main interface display.
Anyone seeing this as well with their second display?

I am having the same issue and wondered what was the issue. Thank you for posting; now I remember Lightroom didn't start doing this until I updated to Mac OS Maverick. The only time I don't have that problem is when I physically disconnect my secondary display from my computer.

Similar Messages

Potential bug with dual monitors running Maverick

When running dual display monitors on a MacMini I have found and can repeat where 2nd display open windows need to be dragged over to the primary display monitor to activate then dragged back before you can actively select or do anything in that window no matter what app you're using. Apple mail is the worst.
Second - primary screen has to be thunderbold monitor to HDMI with the title bars at the top of the primary screen only.
Mirroring has to be turned off, the menu bars can not be on both displays otherwise you can not access the app without dragging it back and forth to activate it. With mirroring turned off - most programs run. BUT Apple mail still does not.
I am using two HDMI ASUS 24 inch monitors running Maverick 10.9 (13A603) on a MacMini: Processor 2.6 GHz Intel Core i7, Memory 16 GB 1600 MHz DDR3, Graphics Intel HD Graphics 4000 1024 MB.
any solutions? Bug or some setting I should change?

No, there is no way to set it up with two different interface (keyboard & mouse) setups.
Unfortunately, it sounds like your about to become a two or three computer family.

Logic pro x mixer window freezes main out VU with dual monitors

In a dual display configuration, with the mixer window in the left monitor and arrange window in the right monitor, the VU meter on the last channel strip to the far right of the mixer window(which is usually the main output) freezes and does not update. This seems to be a Logic X bug, since it does not occour in Logic 9 or any other DAW with the same configuration.
Can anyone confirm this or have a suggestion for a solution?
Thanks in advance

They have had four years to change this, and actually people were asking for it before that. If anyone knows a way, let us know, but I doubt it. Both Logic and Cubase are the only two DAWS that don't allow this....all the majors do....Pro Tools, DP, Studio One, etc. Cubase users have been asking for it forever as well.
I would have upgraded immediately if they had added this, they haven't, and I'm moving over to PT11.
TH

How do I get Photoshop and Illustrator side-by-side with dual monitors?

I currently have my dock on the left side of my left monitor and my menu bar is at the top of my right monitor. I would like to be able to have photoshop and illustrator side-by-side (one in each monitor). Is this possible? Thank you!

keep them both open
If you mean, how can both MenuBars be showing at the same time, you can't. But their windows can be there, you can click on a window to make it active, cut from it and click on the other window and paste into it.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

So I recently upgraded my ram to 8GB but so far I haven't seen any improvement. I ran some tests and everything turned out fine with the ram. What should i do?

So I recently upgraded my ram to 8GB but so far I haven't seen any improvement. I ran some tests and everything turned out fine with the ram. What should i do?

What is the problem exactly???
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

N97 screen goes off and then it out come with rest...

M using nokia handsets from last 8 years ,its the first time when i am feeling very bad after purchasing n97
n97 goes down during using phone and out come with many restart,
many times it hangs, phone locked when i press end call in lock mode.
what is this nokia, what are u doing .....
do somthing
N97 Black ROM-505 SW-11.0.

There have been reports of similar problems in the forum this week. So it may be worth checking if it is related to this:
http://bbs.archlinux.org/viewtopic.php?id=77351

Interface Bug with 2 monitors in LP8

I use 2 monitors tiled vertically to display a large track layout - in 7.2 I'd have to open the screenset and drag the window across to the 2nd screen - once I did this it would stay in place (across the 2 monitors)
I LP 8 I tried the same thing - only when I select a track on the 1st montor the display reverts and redraws the window to only ONE screen - so for now v. 8 is useless -
Also - I find the legibility is MUCH WORSE with this haze of grey over everything - Looks Like I'll be hanging on to my xs usb keys for a while---
back to work, back to 7.2

I work with 2 monitors all the time - with very large arrangements it's a huge boon. Are you saying if for example you have a linked matrix editor open on the 2nd screen every time you change tracks it shhots onto screen 1?
This would be a disaster for my use of Logic so I hope this isn't the case or if it is it's a soon to be fixed bug!
Julian

Mac and Windows with dual monitors Question

I use a Intel MacPro running Tiger with latest updates in my church. We use the Mac and Keynote 2.0.2 to present PowerPoint slides on the big screen (dual outputs). Everything was going well until the pastors upgraded to new computers running Vista and Office 2007. Now neither pastor's files will load into Keynote. It comes up with an error. The pastors have saved their files from PP as 2003 PPT files, and they still will not open. Error - unable to open file type. The one pastor went back to XP (dumped Vista) but still used the Office 2007 program and saved as PP2003, but the error still appears.
FYI - I noticed that Office 2007 saves with a file with the extension of .pptx instead of the .ppt. Checking the file they gave me shows that it is indead a .ppt file and not .pptx file. It makes no difference.
I believe it is an Office 2007 problem I'm dealing with. I have taken the .ppt file and loaded it onto the PC running PP 2003 and it loads fine, except for some format problems. I then resave it with a different name and tried to load that file (hoping it was converted) , with the same error showing. The problem is transfered with the file. Other files created with the PP 2003 program load fine into Keynote, so it has to be the Office2007 doing something.
So the questions are, is there an easy fix and still use the Keynote program, OR does Keynote 3 take care of this problem in the upgrade, OR should I install Win XP home or Pro and use parallels (which I have)? Would WinXP Home be enough to support the dual outputs and be fast enough? I am familiar with XP Pro not Home.
Any information you may have, could be a help. I need this resolved soon. I hate having to bring in the old Windows PC, after enjoying the quality of the Mac.

David.Austin.Allen wrote:
You should not have issues attaching two displays to the Mac mini. You will not be able to use an iPad as one of those displays.
I have no issues streaming video on demand from all of the media sources which you have listed. My Mac mini is the Early '09, so my hardware is not as powerful as the newest Mac mini.
Dah•veed
Thanks David - glad to here the Mini supports dual monitors, and you're not having any streaming issues. Did you have any special settings, like "no hardware acceleration"? Are you streaming HD content?
If it supports dual monitors, then I would think the iPad could be used as a second display and input device - the demos I've seen with Air Display (from Avatron Software") would accomplish what I'm looking for. Here is a demo at http://www.vimeo.com/16950420 showing the iPad working with a Windows machine, but I've seen them working with Macs as well.
Thanks again
Michael

ARD and controlling box with dual monitors!

My workstation at home has dual monitors,
when I connect to it with ARD both monitors are displayed, which means the window looks very wide, small and funny.
You can hardly see anything either.
(they are both highres)
I only need to see one monitor when I connect with ARD. Is there anyway I can get that working?

You can set ARD to view all screens at once or at real screen resolution. Click the 'Fit Screen in Window' icon (looks like an X with arrow points and a diamond in the middle).
I have had some issues with my Multi-screen machines colors displaying oddly while in 'Fit Screen in Window' mode, but turning it off fixes the issue and lets you auto scroll around like virtual Desktop.
Hope that helps.

Problem with dual monitor 30" and 20"

waaa... i've switched plugs and all that.. my 30" is acting as a second monitor no matter what i do...
i want the 30" as my main display...
my dock and menus are on my 20"
is there a way to switch them? or do they not support dual monitor with a 30"
for your info..
video card is nvidia geforce 7300 gt
please help.. i don't want to give this bad boy to someone else at work.
thanks.
Pave

How?

Odd shadowing effects in XFCE with dual monitors and intel graphics

Linux fowie-desktop 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686 Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz GenuineIntel GNU/Linux
lspci shows:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
not using an xorg.conf
rc.conf (snippets)
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Denver"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp vboxdrv !saa7134 saa7134-dvb)
DAEMONS=(syslog-ng dbus hal @network @netfs @crond @alsa @cups @sensors @samba @ddclient @sshd @httpd @mysqld @smartd)
and my .xinitrc:
/usr/bin/xrandr --output VGA1 --left-of DVI1 --output DVI1 --mode 1920x1080
exec ck-launch-session startxfce4
Xorg.0.log at http://pastebin.ca/1925313
If I use the xf86-video-intel driver from extra, the xrandr command to do dual-outputs fails and I get both monitors showing the same desktop (mirrored mode). I switched to use AUR's xf86-video-intel-git (reading the forums it said this would fix the dual-monitor issue until extra moves to 2.12.0-2) and I do get the dual monitors working propery with the xrandr command, but I'm experiencing wierd effects. For every unminimized window on the desktop, if I put another window in front, the shadow of the window below stays on top of the window containing the focus. Hard to explain, so I'll use a photo:
That's what it looks like with xf89-video-intel-git, libdrm-git, dri-git, and anything else git and intel graphics related I can find. Any ideas what's wrong, or what I would even call this problem so I can look around and see if anyone else is having the same issues?
Last edited by fowie (2010-08-25 20:21:53)

Ok, I went into the XFCE4 setting manager and opened the "Window Manager Tweaks" module, Under "Compositor" if I disable display compositing the shadowing effect is gone, making the display much more usable (thanks!). But now compositing does not work. Guess I'll go report this to XFCE, or is the XFCE compositing manager handled by someone else?
Last edited by fowie (2010-08-25 23:11:54)

OpenGL freezes computer with dual monitors and fglrx

I am trying to use the fglrx driver, and with a single monitor I seem to have gotten everything working.
However I am running into issues with two monitors. Basically, when I have two monitors any opengl program doesn't run properly.
There are two cases. If I use the xorg.conf generated by "aticonfig --initial", it still seems to detect the other monitor (although there is a black region on my gnome desktop). If an opengl program is run, the screen goes crazy where random pixels are changing different colors. I can end the program, and everything goes back to normal.
Using the program "amdcccle" I generated xorg.conf for dual monitors (I pasted it below). When I use this configuration, any opengl program completely freezes the computer instantly.
I have been looking for a while, but have not found any information that might lead to a solution. Does anyone here have any advice?
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP10"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP10" "0-DFP10"
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-0"
Device "amdcccle-Device[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3600 1920
Depth 24
EndSubSection
EndSection

+Sorry. I mean "right" in the last sentence.+
Hello.
I put my second monitor of a dual monitor set-up to the left of the main monitor - the one with the FC application, keyboard and mouse, etc. Trouble is the mouse kept hitting the left hand wall of my main monitor when I tried to send it to the second monitor. After a while I realized the mouse/computer thinks the second monitor is to its right, so I have to exit the right hand side of the main monitor to get to the one on the left.
Is there any way to instruct FC and the mouse that the second monitor is on the left? Can the mouse be instructed to "pass" through the left hand wall of the main monitor rather than the right? Or must the second monitor always go the right of the main monitor?
Thanks.
John

Stray Blob with Dual Monitors and a Stand Alone exe

Hi,
When I run any stand alone exe that I make on a dual monitor system (XP Media Center) I get a blob (see attachment) that is stuck in the middle of the primary monitor. I tried a very simple app and a complicated one. Clicking on this blob will make my app run in the foreground and if my app is in the foreground then the blob will show up in front of everything else except for my app.
I'm using LabVIEW 8.01.
Thanks,
Albert
Attachments:
Blob1.GIF ‏8 KB

Have you tried a CO2 fire extinguisher on it? (reference to the movie "The Blob")
Message Edited by AnalogKid2DigitalMan on 09-19-2006 01:35 PM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Attachments:
200px-The_Blob_poster.jpg ‏16 KB

Lightroom 5.2 and Mavericks Lights out bug with dual monitors

Similar Messages

Maybe you are looking for