Lightroom 5.2 won't open after "successfully installed" - can anybody please help me understand why?

Hi everyone
I've bought and downloaded Adobe Lightroom 5 for a new iMac 27" intel core 5 3,4 GHz. The machine is only three days old and no more updates are to be found when searching for it. However; after the message that "lightroom 5 has successfully been installed" I don't get to open the program. So I never get to the point where I can register the serial number / registration key for purchased product.
I've followed the instructions that comes with Lightroom 5, but no luck. Also tried to uninstall and reinstall.
No secret that I'm total incompetent when it comes to understanding of computers and software....
Hope someone can help me understand what I'm doing wrong, and sugest some good solutions :-)
Thx

I think you may need to uninstall and then start over. There is no installer on the Mac for Lightroom so select it in Applications and send it to the trash.  I suggest you download again from a different source. You can use the link below to download the free trial and then validate the software after installation with your product serial number. Ensure you choose your language version and MAC platform from the dropdown list at the top of the page.
After you click download it starts by downloading or updating (replace) the Adobe Download Assistant. You then browse the products and select Photoshop Lightroom 5 to start the installation.
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML

Similar Messages

  • AI cs6 won't launch after Mavericks installed...please help!

    I tried uninstalling and reinstalling, updating from Cloud. Hesitate to upgrade to new CC because don't have that at work.

    sterngirls,
    Did you use the full three step way?
    Uninstall, run the Cleaner Tool, and reinstall?
    http://www.adobe.com/support/contact/cscleanertool.html

  • HELP!!!! Aperture 1 won't open after I installed Snow Leopard.

    Aperture 1.5 won't open after I installed snow leopard. Why is it not working?

    Because it's incompatible. You need to upgrade to version 2.1.4 or newer.
    (56089)

  • "General" in Settings won't open after I installed the iphone 4.0 upgrade.

    "General" in Settings won't open after I installed the iphone 4.0 upgrade. Any ideas?

    Have you tried to reset? Hold off button and home button together until Apple apears.

  • HT201210 My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

    My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

    This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015

  • I had already paid the teacher, student edition. And it's for a year. But now since my 30 days free tril was over, I couldn't open it anymore.  can someone please help me?

    I had already paid the teacher, student edition. And it's for a year. But now since my 30 days free tril was over, I couldn't open it anymore.  can someone please help me?

    Felipef32638067 please see Sign in, activation, or connection errors | CS5.5 and later for information on how to resolve the connection error preventing your membership from authorizing.

  • Photoshop CS6 won't launch after successful installing the upgrade on my PC

    After a successful installation process, Photoshop CS6 opens, starts to load, then vanishes....   I'm on a PC where I'd been running CS5, then upgraded to CS6 via internet. Had problems with installation setup, which were settled via Adobe Chat. Now the programme starts up ready to open but shortly after the PS sign comes up and before the window actually opens, just disapears. Can anybody help with this please?

    Ok, I found one more article talking about upgrading to 11.3 upgrade instead of 11.4(latest). Finaly worked. Hope this helps someone else, this was painful.

  • My illustrator won't open after I install

    my illustrator won't open after I install

    menya,
    I believe you may as well go straight to 6) on the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Adobe Reader won't open after successful installation??

    Hi guys,
    I recently installed the latest version of Adobe Reader for my Macbook Air and even got a confirmation that it was successfully installed and everything and yet when I click on its icon, it just won't open. Usually with Macs, the application icon will bounce up and down as the application is loading or waiting to open but the Adobe icon just moves once then stops, and nothing happens. It would say that it is "open" because it gives me the "quit" option when I right click on the icon. I've tried downloading it again twice but it still won't budge and worst of all, it doesn't give me any clues as to what is wrong with it or what I can do about it.
    So if any of you know a solution, please let me know and thank you in advance!

    Moving this discussion to the Adobe Reader forum.

  • Lightroom 5.5 won't open after update

    I updated to Lightroom 5.5 using the Creative Cloud app, but the program will not open. I uninstalled and installed again, restarted, and logged on as a different user, but none of these things solved the problem.

    Kbqvist_ I would recommend contacting our support team for direct assistance with the solution offered in the KB document in message #1.  For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.
    StevenMGoff thank you for the update.  This solution was published as it has allowed a majority of people affected by this error to utilize Lightroom successfully.  We are continuing to investigate the issue.  I am very happy to hear that directly downloading Ligthroom 5.5 from Product updates allowed you to successfully install Lightroom 5.5.

  • Firefox won't open after re-installing and can't remove from control panel. What do I do?

    After a storm and short power failure, I started having trouble with certain sites loading, and pages moving slower. I emptied my cache and defragged and ran total virus/ malware scan, but still had problem. (Pages loaded fine on AOL) I decided to uninstall Firefox and re-install to help fix problem. I did this, and now Firefox won't open, no matter if I double click, right click (open), or go through "all programs". I tried to uninstall and re-install again, but now I can't get it to respond through my control panel, either.

    Try the procedures in the [[Firefox will not start]] article.

  • IPhoto won't open after new install and restore of back-up

    Hi guys
    My hard drive just died (for the second time in 6 months!) so I have just gotten the computer back with a new drive. I did a new install of Tiger from my original install CDs, did the download thing to get all the updates, and ran a "restore" from my external drive using iBackup (http://www.grapefruit.ch/iBackup//index.html) to restore all my previous system settings, documents, etc. So far this seems to have worked well, a couple of 3rd party applications didn't re-install - specifically Neo Office and WiFind - but I was able to manually install those and everything seems to be working fine.
    Except iPhoto. It won't open. When I click the dock icon it bounces once and does nothing. No little arrow under it or anything. Nothing at all happens when I click the icon in Finder (in the Applications folder). When I searched it in spotlight it told me there was a file called iphoto.crash.log, so I went and had a look at that hoping it would tell me the problem, but I don't understand it. I'm not particularly good at the behind the scenes stuff with computers.
    Wondering what I should do now - if someone can perhaps interpret the log file and find the issue if that would help, or if I should uninstall and re-install iPhoto by itself (and if so, how?), or if there is something else that may be causing the issue. I noticed there are a few files relating to it when I search with spotlight but I don't know which of them might be relevant. I could post a screenshot if that is allowed, or post the log file if it would help?
    Thanks in advance for any advice or help!
    Regards,
    Chloë

    400 Updates???
    Did you Repair Permissions before & after each one?
    The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before & after re-install, then reboot again each time.
    If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Logic won't open after i installed it

    Hey there,
                   after i installed logic pro 9 on snow lepoard, it won't open along with all my other applications that were fine before i installed logic. It gives me a problem report that i don't really understand. i need help!!!

    Yes.. you cannot easily downgrade from one OS X to another without starting again from fresh..... otherwise you can easily get the sort of issues you are having.
    Solution.... (The short version)
    Make sure you have first got backups of all your personal data, projects, photos, music etc..... 
    Double check youn have saved all your personal data out.
    Ensure you have your Snow Leopard Installation disk(s) to hand..
    Boot to your SL installation disk..
    Reformat your hard drive using the Disk Utility found in the SL Install menu bar..
    Re-install Snow Leopard.
    Install Logic Pro 9, update to latest version and test.....
    If Logic will not launch then install that Prokit I gave you the link for...   and test again. Do not install it if Logic works ok..
    Install any drivers for audio/midi hardware if needed and ensure correct versions are installed for OS X version.
    Install all 3rd party plugins and apps..
    Manually transfer all personal data and projects etc... back to your newly setup Mac...
    Test again....
    Long version....
    http://support.apple.com/kb/HT3910?viewlocale=en_US
    Important Note: Do not use Migration Assistant but manually back up and restore all personal data etc....

  • IBooks, Mail, After Affects, Quick Time Player, Maps, App Store, won't open after Mavericks install/update

    Just about everything on computer is slow as mollases after Mavericks Update. I am very angry because I can't use After Effects at all. It says it's not compatible with this new system. My mail application crashes as soon as I open it. Notification centre is non-existent now and Messages app won't open at all. Other apps such as iBooks, Mail, After Affects, Quick Time Player, Maps, App Store, and a few others won't open at all on this new system. I'm soo angry with Apple as I've never had so many problems with a new OS X. .. I would love to downgrade back to Mountain Lion OS. Anyone with helpful info, please respond. Thanks.

    Hi,
    From the top More Like This item
    https://discussions.apple.com/message/23487600#23487600
    7:29 pm      Sunday; October 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • App Store Won't Open After Mavericks Install :(

    Since installing Mavericks my App Store won't open.  I click and it bounces one time then....nothing.  Any ideas on how to fix this?
    I discovered this when I noticed that Image Preview won't open. I thought that there was an update for it so I went to the app store to see and discovered it won't open either!

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account

Maybe you are looking for

  • 2 Regions with pagination on the same page

    Hi all, I'm trying to display 2 report regions on one page. The first region is the master, the second is the details region. The master region displaying only 5 records on one pagination page. The second region (scrollable region) has no pagination

  • Oracle/ SQL Developer connection problem.

    I have installed Oracle 11 g and SQL Developer, When I open SQL Developer and try to make a new connection ( I name the connection, put a user name in, put my password in), I click on "Test" and I get this error: Status: Failure - Test failed: Listen

  • Don't know how to store/show image or pdf files easily in apex app

    Hi, I always want to put a blob column in my table and store some images or pdf files, like drawings for an item, but I found it hard to do, I have viewed the sample app by apex 4.0, but I cannot understand the code. Is there a simple and intuitive w

  • PPP connection timeouts

    Hi, I am working on a project in which I connect a SDC modem with my router 3725 on Smart serial port. The scenario is, A node dial to router, when user dial to Access Server (ROUTER 3725), After the connection is establish and user get an IP address

  • Vector files in Edge Reflow...

    Not working as native imports... Both copying & pasting or import not working as .AI or .EPS Is it because I'm using Illustrator CS6 vs Reflow CC? The only way it imports is if I save it as an .SVG Not a problem, just wondering because I was under th