Lightroom 5.3 - Export not applying changes to all file formats

Using Lightroom 5.3 with Camera Raw 8.3 on Mac OS X Mavericks 10.9.2
Camera is a Canon EOS 70D, working with Raw files.
Just noticed that when applying a range of changes to an image - Tone / Presence / Noise / Crop / Sharpening (and others)
When exporting the image
- export to JPG, TIFF and PSD works ok, all changes applied correctly
- export to Raw and DNG do not include changes applied to image - original image is exported
Not a show stopper as I have usable formats, but would like all file formats available for flexibility.
Anyone else noticed this ?
Chris.

A RAW file is a RAW file.
DNG is also a RAW format
Lightroom will not alter RAW fomat files on export, as in develop edits.
(it will record those edits in metadata if asked so another application capable of interpreting Lightroom edits can read and apply those edits - like ACR.)
DNG exports can be altered to various flavours of DNG but that does not include develop edits.
A colourspace can also be added as appropriate.
The other formats are derivative files and develop edits are baked in on export.
Tony Jay

Similar Messages

Has Lightroom CC removed the ability to Batch apply changes to many files at once (after import) using presets?

I've just upgraded to Lightroom CC and most of the changes are very welcome - especially the performance improvements.
However I've been processing several thousand images and in Lightroom 5 when wanting to apply changes to many images at once it was as simple as selecting the group of images and then right clicking, selecting Develop Settings and then selecting one of my many Presets from a sub menu.
This sub menu seems to have disappeared in Lightroom CC.
This is a MASSIVE problem for me as I cannot work out how to apply the presets to multiple images anymore.   I note that there is a tutorial on how to do it during import - but I want to specifically be able to do it post import, during development of large groups of images for clients.
Anyone know what has happened here and how we can get access to applying presets to multiple images during development under Lightroom CC?

Yes ssprengel.
I regularly work with all the Presets visible in the left of the Develop module.   But this cannot be used to apply the preset to multiple images.   For that (in Lightroom 5) you had to select the multiple images and then right click (on any one of the images) then go down the menu to Develop Settings, then select the Preset Folder and the Preset you wished to apply to all the images selected.   This worked well for me in my workflow.   But the access to the Presets through the Develop Settings menu has been removed in Lightroom CC.   ManiacJoe's solution above works - but it's accessed from the Library module.   That's kind of counter intuitive.   I want access to apply any preset I've saved to multiple images (in many cases t's being applied to thousands of images) from within the Develop module.   it makes little sense to apply a preset one image at a time to thousands of images when developing them
The whole idea behind presets was that they could be quickly and consistently applied across multiple images.   Removing this functionality is a backward step by ADOBE in my opinion and I really want them to add it back to the Develop Module menu systems.

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

Lightroom 5.6 does not recognize nef (RAW) image files generated with the new Nikon D750: who can help here or knows what to do? Thanks, Peter

New Nikon D750:
Lightroom 5.6 does not recognize nef (RAW) image files generated with the new Nikon D750: who can help here or knows what to do? Thanks, Peter

LR 5.6 doesn't support the new Nikon D750. You have to wait to the next update.
You con also install the release candidate of the DNG converter and convert your NEF files to dng.
http://blogs.adobe.com/lightroomjournal/2014/10/1366.html
Axel

Can we change the default file format 'BIN' of system to 'ASC' using table

can we change the default file format u2018BINu2019 of system to u2018ASCu2019 using table TSOPE
if possible:will it affect any system performance

Hello Vincent,
BIN(Binary) is default selection.and so we have to select ascii.to make myself more clear my queries is like:
first for setting ascii what we need to enter in text box that is against ASCII.and
secondly if we select ASCII will it affect system performance in anyways.

PL/SQL problem with too many lines - can not apply changes

I have a complex PL/SQL that requires checking 90 check boxes and the query works to a certain point then it just stops being able to be saved (apply changes) after a high no. of lines has been typed in. (The PL/SQL query is to check against a file, that the file has all the check boxes as yes. If there is only 1 or 2 boxes checked, then the sql created only checks those 2 fields for yes.) Is there a way to increase the coding space (or number of lines) that APEX can save/use.

This is the whole PL/SQL coding. At this point, we cannot add any more lines or it will come up with "web page cannot be found" message.
declare
q varchar2(32767); -- query
new varchar2(1):='Y'; -- first one
begin
q := 'select a."CONTR_ID", a."NAME", b."PHONE_NO", b."EMAIL_ADDR" FROM contractor a, contacts b where a.contr_id = b.contr_id and a.contr_id not in (Select unique a."CONTR_ID" from contractor a, contractor_competency b where a."CONTR_ID" = b."CONTR_ID" ';
-------------------Start ENV
if :P33_AIR_QUALITY_TESTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Air Quality Testing'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ASBESTOS_REMOVAL_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ASBESTOS_REMOVAL_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_BUILDING_ASBESTOS_REMOVAL = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Building Asbestos Removal'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ENVIRONMENTAL_CONSULTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Environmental Consulting'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_MANHOLE_ASBESTOS_REM_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_MANHOLE_ASBESTOS_REM_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_FILTERING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Filtering'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_SAMPLING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Sampling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_SPILL_CLEANUP = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Spill Cleanup'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_PUMPING_OUT_MANHOLES = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Pumping Out Manholes'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_SIGNED_ENVIRO_DOCS = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Signed Enviro Docs PRO-MS-008'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TRANSPORTATION_OF_D_GOODS = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Transportation of Dangerous Goods'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TRANSPORTATION_OF_PCB = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Transportation of PCB'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WASTE_PICK_UP = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Waste Pick-Up'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
-------------------- start OCM
if :P33_GREENFIELD_POLELINE_CONST = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Greenfield Poleline Construction'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_HV_OVERHEAD_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''HV Overhead Maintenance'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_INSULATOR_WARNING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Insulator Warning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_LV_OVERHEAD_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''LV Overhead Maintenance'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OVERHEAD_INFRARED_SCAN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Overhead Infrared Scanning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLEHOLES_AND_ANCHORS = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleholes and Anchors'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_INSPECTION = 'YES' then
if new = 'Y' then q := q || ' and( '; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline Inspection'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_WORK_TO_35KV = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline Work to 35KV'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_TO_44KV = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline to 44KV'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ROCK_DRILLING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Rock Drilling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TENSION_STRINGING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Tension Stringing'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TREE_TRIMMING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TREE_TRIMMING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WOOD_POLE_TESTING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WOOD_POLE_TESTING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
------------------ start UCM
if :P33_CO2_CLEANING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''CO2 Cleaning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_PULLING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Pulling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_TESTING_DEENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Testing De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_TESTING_ENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Testing Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CONC_DUCT_MAN_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CONC_DUCT_MAN_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIR_BURIED_DUCT_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIR_BURIED_DUCT_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIRECTIONAL_BORING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Directional Boring De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIRECTIONAL_BORING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Directional Boring Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_GENERAL_EXCAVATION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''General Excavation Around Plant'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_HV_UG_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''HV Underground Maintenance'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_LV_UG_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''LV Underground Maintenance'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_CLEANING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning De-Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_CLEANING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_INSPECTION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Inspection'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_EQUIPMENT_INSPECTIONS = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''UG Equipment Inspections'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_INFRA_RED_SCANNING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''UG Infra Red Scanning'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_CABLE_LOCATES = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Underground Cable Locates'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
------------------------ start SCM
if :P33_FENCING_AROUND_SUBSTATION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Fencing Around Substation'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_FENCING_GREENFIELD = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Fencing Greenfield'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_INSPECTION_AND_TESTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Inspection And Testing'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CIVIL_WORK = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Civil Work'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CONST_DEENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Construction (De'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CONST_ENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Construction (E'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_INFRARED_SCANNING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Infrared Scanning'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATIONS_ASBESTOS_REMOVAL = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Stations Asbestos Removal'')) > 0) and
(instr(upper(b."SET_YES_NO"),''NO'') > 0) ';
end if;
if new = 'N' then q := q || ' ) ';
end if;
q := q || ' ) ';
return q;
end;

OCT MSP File Not Applying Changes

Hello All,
I am trying to use an msp file to apply some settings changes; e.g. add and remove a new Normal.dotm, themes, Outlook defaults, etc. When I edit the file, everything entered in correctly. I have tried using a batch file and manually running the
msp file and still nothing. I'm getting a little frustrated as I don't understand why it's not working. I use a similar msp file for a new deployments and the configurations get applied. Why doesn't this one work? Any help would be
greatly appreciated.

Some settings/features within the OCT, are only applied during the initial installation of Office, and do not apply/update an existing installation of Office.
It's not well documented which settings behave like that, but if you review the TN library documentation for Office customization, there is mention of that limitation.
On a test machine, if you remove Office (uninstall it), and then reinstall it whilst referencing your updated/revised MSPfile, does it work ok?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Lightroom 5.7 not applying watermark to all images

I am having an issue with Lightroom not applying my text watermark to all of my images. It seems to happen randomly. Some of the time it works and others it does not. I have tried checking for updates and there are none available. Is anyone else having this issue? Any ideas on how to fix?

First off I ask why you want a watermark on All Images. I only apply a watermark to images I post online in public galleries. What if you want to Print an image for display on your own home/office wall, do you still want to see a watermark on that image (I wouldn't)?

Import JPG w/ LR. - Export it (no change at all & same colorspace) - Different image???

As the title reads:
I import a JPG with lightroom, do nothing on it. Then I export it. The output JPG colorspace is sRGB, same as input one. I do not allow the 'sharpen for screen' option in the export menu. Under preferences I do not allow auto tones or any other option.
The output JPG is slightly darker/contrasted/saturated than the input one.
WHY????
It doesn´t happen using PS, nor Capture NX2:
Thanks in advance!

First of all, many thanks, I´ve been researching for a looong time before posting in here with no luck so far.
I made a test:
I opened (imported) a JPG with LR. Colorspace sRGB. Then I exported it. Colorspace is still sRGB
I did it 5 times. Taking the last exported image as next input.
So I have JPG1,JPG2....,JPG6
Each one is darker than previous with the soft I use for wiewing.
I open JPG1 with LR, navigate to JPG2 wich LR shows it as darker too, JPG3 is shown darker than JPG2 also... SO LR shows same as my viewers.
And here comes the funny thing: If I see hystory of JPG6 in lightroom, only 2 events appear, imported w/ date AND exported with date. SAME in any other of the 5 images.
SO the program when exporting make some changes that are not reflected in the historical.

Exporting pdfs to word and excel file formats and translating

Hello, I am new to this forum and came here because I am a professional translator. Although we should be given documents in their original file format, in the real world translators have to convert pdfs such as manuals or annual reports into word or excel files. Given the fact we often work for agencies, and/or do not work directly with the people who created the original files inthe first place, with the best will in the world we normally have to make do with converting the pdf file, or lose the job.
I would like advice on the best way to learn more about pdf to word and excel conversion and ways of keeping formatting when it is helpful and removing what is not.
The general problem is (well the problem is really ignorance on my part!) of course getting the "look and feel" similar in the converted document and knowing more about manipulating the formating and elements which get converted.
Any help or pointers to online tutorials whether multimedia or text much appreciated.
David Hardisty (david1610)

Thank you Lori, this is so clear! I am a teacher as well and there are clear presentations and wonderfully clear presentations and this is in the latter category.
A tiny suggestion. You would not believe how many pdf files exported to word I have received that are Portuguese content and the sender has not set the language to Portuguese! So in your text entry you might want to mention the language setting. I know it is obvious, but as we know sometimes we cannot see the obvious!
I will need to look far more carefully at the final things in your video.
Are there any special considerations for exporting pdf files as Excel? My original doubt was I had to translate some accounting documents. 95% of the document was numbers which did not changing (except for commas to periods and vice versa due to different separator conventions). I did not now how to just select e.g. the vertical column with text. I will go back and try with this suggestion because in this case the look and feel of the numbers was important and the precise fonts etc. seemed to cause problems. But now I am getting out of my depth!
Thank you again!
DavidHardisty

Change in AAC file format?

I have a 3rd party music player (the Archos 604 WiFi) with the podcast plug-in (which includes support for non-protected AAC files). I can play AAC files created (i.e., ripped) with iTunes 7 just fine, but it has trouble with AAC files created with older versions of iTunes. Has the AAC file format changed? Is there a way to convert older AAC files to what seems to be a newer AAC format? I don't want to have to re-rip my entire library (26 GB) again when I am not even changing the format.
iMac (Intel) Mac OS X (10.4.8) Archos 604 WiFi

It doesn't matter which adapter you are using that approach will work. Any custom modification of the output column order which overrides the calc sequence can be done in the Export Action script. Be aware though that any changes to Action script will affect your support agreement with Oracle if you have one. Therfore it may be best to put any custom output in the AftExport event script.

Site re-do -- applying commands to all files?

Newbie here; please be kind.
I've inherited a site with a plethora of
similar-but-different templates. I'd like to be able to detach all
files from their templates and clean them up. Is there capability
within Dreamweaver (8) to apply a command e.g.
modify/templates/detach from template -- to all files? I haven't
found this with the app, nor any extensions.
Thoughts appreciated.

> Yeah, I guess "plethora" is a bit vague. There are 14
templates and just
> under
> 1000 .htm or .html files. If I had to guess, half or
less of them are
> template-driven.
YIKES. Using templates on a site with 1000 files (even 300
files) is like
putting bamboo shoots under your fingernails!
> Maybe a different way of looking at the collection: is
there a way to
> report
> which modules are under the control of which templates?
I just know if I
> make
> some update, I get a count of the files that are updated
as a result, but
> I
> don't see a high level "Template Report" kind of thing.
If you do a sitewide search for each template name, you will
return all
child pages of that template. Or, you can grab this -
For templates this extension can help:
http://www.massimocorner.com/dreamweaver/utilities/template_report.mxp
It reports pages associated with templates and editable
regions inside all
pages
to make that job easier.
> Extra credit: is it straightforward to change the
template being used?
> and their fields are identical (or close enough)
Assuming that their EDITABLE REGIONS ARE IDENTICALLY
NAMED....
Heh - that's easy. First, make a backup of the site for
safety's sake.
Change template1.dwt to template1old.dwt, and REFUSE THE
UPDATE. Then
change newtemplate1.dwt to template1.dwt. Finally, open one
of this
template's ex-child pages, and do MODIFY | Update Pages...,
and update all
pages. Bada bing, bada boom.
If their editable regions are NOT identically named, then
it'll be much more
difficult. Did I say MUCH MORE?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Sbles" <[email protected]> wrote in message
news:[email protected]...
> Yeah, I guess "plethora" is a bit vague. There are 14
templates and just
> under
> 1000 .htm or .html files. If I had to guess, half or
less of them are
> template-driven.
>
> Maybe a different way of looking at the collection: is
there a way to
> report
> which modules are under the control of which templates?
I just know if I
> make
> some update, I get a count of the files that are updated
as a result, but
> I
> don't see a high level "Template Report" kind of thing.
>
> Extra credit: is it straightforward to change the
template being used?
> Let's
> say there's Template1 and Template1a and their fields
are identical (or
> close
> enough). Is there a way to just change all
Template1a's-owned files to be
> owned
> by Template1?
>
> Which there was a nice MySQL schema behind DMX -- I
might shoot myself in
> the
> foot making the updates, but at least I'd have something
to try.
>
> Thanks for your help!
>

Can't export as Html (Waiting for all files to be ready...)

Made a bunch of updates last night to a client site. Everything looks great except I can't export as Html. Had my sister try to export on her computer and we both get to 87%, then it permanently stalls, saying "Waiting for all files to be ready" (See screenshots). We've ensured that no files are open or being previewed. We've rebooted and tried saving to a different location, all with no change, we still get to the 87% mark and stop. Please help. I have a client waiting for this site update.
Details:
Windows 7
Sony Vaio
Muse Version - 4.1 Build 8 *see screenshot
****Update:
I can preview the entire site in a browser as well as preview each page individually, but cannot finish a html export past 87%.

Odd are if you wait long enough, potentially a few hours, it will complete.
This huge performance hit sounds exactly like a bug that's fixed for the Muse CC 5.0 release due out next week. Sorry for the inconvenience.

Changing smart object file format

I've got a great problem with the smart objects in my project:
I imported some Images (no background) which had the file format 'png'. I just dragged and dropped the files into my current photoshop window. They got imported and then automtically converted into smart objects.
After that I created a lot of copies of these smart object and transformed them.
Now I wanted to change one of the smart objects and double clicked on it. But unfortunately the opened file is a png. So it's not possible to save layers in this smart obejct
Is there any way to change the file format of a smart obejct (like psb/psd)?

Yes. Open an SO into a doc window/tab, edit it or whatever, do a Save As to PSD (or any other format). It'll be saved into a temporary folder. Close the SO doc window/tab. In the main doc window/tab, right-click the SO's name in Layers panel, pick Replace Contents and select the file you saved in the temporay folder. All instances of the SO will be auto-updated.

Change "save as" file format list

How do I change the file format order that is listed in the "save as" file format window? Instead of having "Photoshop" listed as the default file, I'd like to have JPEG at the top, then TIFF, PSD, etc. I have to constantly scroll down the list to find JPEG.

c.pfaffenbichler wrote:
I know of no way to change that order.
Edit: Actually one could probably Script a dialog with a file-format-dropdown-list of one’s own devising, but that hardly seems worth the trouble.
But with Configurator and some Scripting you can make a save-as-jpg (and save-as-psd and whatever) into a one-click operation.
See that is exactly what I think is wrong with Configurator it allows you to some cosmetics but no real customizations there are lots of formats I do not need ever. There are things I would rather have a menu item than as a panel selection and there things I would rather have that only do a coupe of options by default but you never get the opportunity of doing these things with this program.

Lightroom 5.3 - Export not applying changes to all file formats

Similar Messages

Maybe you are looking for