Lightroom 5.3 installation fails (Windows 8.1 x64)

I had Lightroom 5.2 installed. I ran LR 5.3 installation from Adobe CC applications to update it. Installation failed with the following in log file:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe_Lightroom_x64.msi_5.3 -----------
ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid.
MSI Error message:
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624
I removed LR 5.2 from Windows Control Panel and tried to install 5.3 once again. Same error occures.
Is there a way to fix this issue?
PS I tried CC Cleaner but it doesn't list Lightroom for cleaning

Hi TohaToha,
Please refer : http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html
If the system requirements meet with that of Lightroom, kindly try the below mentioned links
Links 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Links 2. http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

Similar Messages

Lightroom 5.3 installation fails

Hello,
I have a brand new HP computer and I don't succeed in installing Lightroom 5.3.
The installation always stops at 42% and then I get the message "Installatie is mislukt" (installation failed)
"fouten tijdens installatie (7)" (errors during installation (7))
When I click on "meer informatie" (more information), nothing happens.
I had no problems during the installation of Photoshop CC, Illustrator CC and other programs of the CC suite.
I have a HP Z 230 workstation with Windows 7 Professional (Service Pack 1).
Up to now there is 12 GB RAM installed.
It has a i7-4770 CPU @ 3.4 GHz and I try to do the installation on a ATA Samsung SSD 840 SCSI Disk.
Any help would be very much appreciated.
Yours sincerely,
J D (Belgium)

Try locating the lightroom exe ( Executable) file into Temp folder and install the product by running that executable file.
To locate Temp folder.
Hold Win ( Key) + R to open Run window.
Type %temp% press Enter.
Locate Lightroom exe file into Temp folder and Run it.
Regards,

Lightroom 5 updgrade installation fails

I just downloaded a lightroom 5 upgrade from adobe and tried to install it. The default installation parameters failed with either insufficient disk space or a directory permission problem (it wasn't specific). I have 45gb of free disk space, so it wasn't that. Tried moving the "unzip" directory to computer/local disk/users/myusername/lightroomtemp. This time the installation went 100%, but then failed again with the same message. Are there any log files? any other ideas?
thanks!

Thank you for your reply. I realize that this is a user forum; Adobe support was closed until Monday, and the site "highly encouraged" users to use the forum as "the best place to get answers."
I read the "Readme" that came with the Lightroom 5 installation. I checked compliancy with everything except for the graphics card (Lightroom 3 works fine, so I'm expecting Lightroom 5 to also work fine.)
Here are the system requirements out of the readme:
Windows
 Processor: Intel® Pentium 4 or AMD Athlon® 64 ( I have an AMD Phenom II 4 core, 3.2ghz)
 DirectX IO-capable or later graphics card (I'm pretty sjure my graphics card is compliant)
 OS: Microsoft® Windows® 7 with Service Pack 1 or later (Yes)
 RAM: 2 GB (4 GB Recommended) (I have 4gb)
 Hard Disk: 2 GB of available hard-disk space (I have 114gb free now out of 465gb on my hard disk drive.)
 Display: 1024 x 768 Monitor Resolution (yes)
 Internet connection required for Internet-based services (internet is connected)
Here are the messages from a screen shot from the failed installation: it says: (title bar) Photoshop Lightroom 5.3 installer
Error message: a problem occurred while extracting some files. Check available space on your computer and write privileges on the destination folder.
I ran the installer using all defaults, and again in a higher level directory that I seemed to have write access to. Both times it failed after about 87% through the installation.
Thanks for any suggestions that you might have; I really appreciate any ideas. I'm pretty computer savvy, and am usually able to sort out a problem, but the lack of log files and specific error messages is limiting my ability to debug this problem

Lightroom 5.2 installation fails - Javascript warning

I've tried to install Lightroom 5.0 and, just now, Lightroom 5.2. The installer fails with a warning: "Adobe Photoshop Lightroom 5.2 can't be installed on this disk. An error occurred while evaluating JavaScript for the package." Not exactly clear. It also displays a warning for my primary drive and for the installer volume.
When I look in the installer log I see the following entry:
Oct 12 13:34:26 TM-MBP-2.local Installer[721]: JS: Package Authoring Error: Exception thrown while running volume check. TypeError: 'null' is not an object (evaluating 'my.target.systemVersion.ProductVersion')
This is also unhelpful. When I look into the console for errors I found the following entry:
10/12/13 1:34:23.000 PM kernel[0]: HFS: Vol: Lightroom 5.2 Very Low Disk: freeblks: 1084, dangerlimit: 1178
Apparently the Lightroom installer is complaining about the amount of disk space available. The drive I'm trying to install it has 134 gb of space available.
Any suggestions about how to get LR 5.2 installed?
Tony

I also found a weird problem with VMware when I tried to start a virtual machine. After trying to track that down I found the following article: https://communities.vmware.com/message/2297745
According to this article the VMware problem is caused by the 10.8.5 update and can be resolved by:
Solution to the issue is:
1. Download the update package from http://support.apple.com/kb/DL1686
2. Create an empty mach_kernel file (otherwise the update installer won't work) using Terminal command:
sudo touch /mach_kernel
3. Install the OSXUpd10.8.5Supp.pkg from the downloaded file. It should restore the proper mach_kernel file.
After installing the update (and before restarting) it's possible to verify that the file was installed correctly:
ls -l /mach_kernel
It should show the permissions -rw-r--r--, owner root, group wheel, and file size 8244640 bytes.
To prevent the mach_kernel file from showing up in Finder, run the command:
sudo chflags hidden /mach_kernel
I tried this and I could start a virtual machine. I thought I'd try the LR 5.2 installer again and it worked! Yay!

ITunes 7.3 installation failed (Windows XP)

While installing iTunes 7.3 on my Windows XP computer, the installation failed because the installer didn't have sufficient privileges to modify AppleMobileDeviceHelper.exe. I've tried uninstalling a previous version of iTunes and reinstalling it; I've tried uninstalling every Apple software I could find and reinstalling iTunes; and I can't restore my laptop to factory settings. And yet it seems iTunes is continuing to be stubborn, rendering my efforts futile. Please help me to identify and solve this problem so that I may use my new iPod.
Thanks!
~ K

A week later I installed it on my other PC ...
Stop 0x0000007B
Have you ever had Roxio Easy CD Creator 5 Platinum
Edition installed on those two PCs? If so, first
see:
STOP 0x7B error after you remove or reinstall
Roxio Easy CD Creator 5 Platinum Edition
roxio is not on either computer and i can't boot either one.
friday my first pc went out and yesterday my second.
the only new anything is the itunes update.
the earlier version i've used with my iphone for 2 weeks and no problem. It appears that with the new update that when you reboot for 7.3.1 to take effect, the crash occurs

Lightroom 5.7 Installer Fails on Win 8.1 - Windows compatibility reports incompatible

Have had a case open since 15.2 and getting nowhere (0186366824). Was wondering if anybody here has encountered this issue and resolved?
New PC, clean install of Windows 8.1. My old 3.6 version of LR returned an installer failure and was advised it was incompatible and I needed to upgrade. 5.7 now behaves the same.
To date I have been instructed to downland full versions of LR - 5.5, 5.6 and 5.7. All fail at the installer running as Admin.
The last direction from support was a little scary considering I own numerous Adobe products:-
Please follow these steps to remove all Adobe folders from your computer and then retry to install it back:
Remove Adobe Folders:-
> C:\Program Files\Adobe*
> C:\Program Files\Common Files\Adobe*
> C:\Program Files\Common Files\Macrovision Shared
> C:\Program Files (x86)\Adobe*
> C:\Program Files (x86)\Common Files\Adobe*
> C:\Program Files (x86)\Common Files\Macrovision Shared
> (Hidden) C:\ProgramData\Adobe*
> C:\ProgramData\FLEXnet
> C:\Users\<user_name>\AppData\
Roaming\Adobe*
> C:\Users\<user_name>\AppData\Roaming\com.adobe.*
> C:\Users\<user_name>\AppData\Local\Adobe*
> C:\Users\<user_name>\AppData\LocalLow\Adobe*
> C:\Users\<user_name>\AppData\Local\VirtualStore\Program Files\Common Files\Adobe*
Remove Adobe folders:-
Registry Editor (Type "Regedit" in Run windows)
> Go to Hkey Local Machine\Software\Adobe
> Hkey Current User\Software\Adobe
Now install Lightroom 5 from the below mentioned link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5741
And then Enter the serial Key of Lightroom 5 and then Lightroom 1
It will install and activate the product.

Thank you very much.
I did uninstall Adobe Air, Adobe Reader XI and another Adobe product, rebooted, and after this the installation was possible with no problems!

Lightroom 4 64bit installation fail

Hi
Does anyone know what´s wrong: My 64bit Lightroom installation stops when extracting lighroom 64bit.msi. I have 64bit win 7. I have tried to start win only minimum processes and tried to uninstall old 3.6 version. After trying to install windows installer msiexec stays on processes list but gets no cpu time. 32bit-installation goes well.

Hi
i'm experiencing same problem and can't find any answer....
Installation starts successfully then the message "extracting .msi" show up and then .... everything stops and nothing more.
I see that process msiexec.exe is up but not running, i tried to wait a long time... in case the installing process is slow... but nothing happened.
I had not had any problem installing the Beta version of LR4, I have no problem installing other applications.
After much manipulation I'm confused (and frustrated):
- I re-load from the adobe website
- I disabled everything that was possible on the PC (including anti-virus)
- I tried System Restore at a later date
- I tried installing on my laptop also in windows 7 64bit and it works!
- I tried Setup32 launched, and it seems to work.
the last thing I have not tried is re-install of the OS ... I prefer to avoid this...
does anyone of you have ever had the trouble and managed to solve it?
thank you in advance

6500A installation failed - windows 8.1

Hello, I'm having some troubles during the installation of the 6500A printer.I downloaded the "Software and Driver" from that link http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6500A-e-All-in-One-Printer-series---E7/4083974/model/4083870#Z7_3054ICK0KGTE30AQO5O3KA30R1. I tried to install "HP Officejet Full Feature Software and Driver" and "HP Officejet Basic Print and Scan Driver" too, both of them raised the same error: Installation ErrorError - 2147467259: Failed to find driver packages to process. Couldn't find any help by searching in google.... 1) So there is something I can do? 2) I saw that in the driver detailes it is written "For Windows XP Starter Edition, Windows Vista Starter Edition and Windows 7 Starter Edition... Added support for Windows 8", Maybe you don't support my windows 8.1. Will be any support to windows 10? Thank you, Daniel

Hello, I'm having some troubles during the installation of the 6500A printer.I downloaded the "Software and Driver" from that link http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6500A-e-All-in-One-Printer-series---E7/4083974/model/4083870#Z7_3054ICK0KGTE30AQO5O3KA30R1. I tried to install "HP Officejet Full Feature Software and Driver" and "HP Officejet Basic Print and Scan Driver" too, both of them raised the same error: Installation ErrorError - 2147467259: Failed to find driver packages to process. Couldn't find any help by searching in google.... 1) So there is something I can do? 2) I saw that in the driver detailes it is written "For Windows XP Starter Edition, Windows Vista Starter Edition and Windows 7 Starter Edition... Added support for Windows 8", Maybe you don't support my windows 8.1. Will be any support to windows 10? Thank you, Daniel

Lightroom 2.7 installation problems (Windows 7)

I have a new computer with Windows 7. I tried to install the trial version of Lightroom 2.7 but it's not working. The message (originally in Dutch) is:
"Can not open the installation package. Check if the package exists or whether you have access to it. Contact the supplier to check whether the package is a valid Windows installer package."
Can anyone help me? Many thanks in advance!

You may need to download the package again.
Make sure that you have administrative rights/credentials on this computer.

OAS 10g Standard Edition installer fails. windows 2000 sp4

I downloaded and unzipped the 2 zip files from: http://www.oracle.com/technology/software/products/ias/htdocs/101201se.html.
When I double-click Disk1\setup.exe ... the mouse pointer changes momentarily to an hourglass, but then nothing. The installer quits immediately. No new process running in windows task manager so the installer doesn't appear to have ever run. I can't seem to find any error log, the installer just quits.
Running Disk1\setup.exe from the command line also quits immediately.
I'm connecting to the Win 2k box through terminal services, if that matters.
Any help with this appreciated.
Versions / specs:
Oracle Application Server 10g Release 2 (10.1.2.0.1) Standard Edition One
MS Windows 2000 5.0.2195 SP 4. 2G Ram, 3G swap space.

Thanks! I get an access permission denied error now, but I think that's a windows account issue.
Thanks again! I should be on my way.

FAQ: Does Lightroom 4.3 install on Windows Vista?

Yes,
but if you have experienced some trouble when attempting to install Lightroom 4.3 on Windows Vista it may be because the downloaded installer is being blocked by Vista.
See this TechNote for instructions on how to allow Lightroom 4.3 installation on Windows Vista.
Allowing Lightroom 4.3 install on Windows Vista

Yes.

Installation Failed Exit Code 20 0 fatal errors, 0 errors, 0 warnings

I'm trying to Install Creative Suite 6 Design Standard on my pc. I've tried two or three times after re-starting the computer and closing all open applications as advised by the Installer. I continue to get an "Installation Failed" window while the error summary reads:
Exit Code 20 0 fatal errors, 0 errors, 0 warnings
Anybody know how to handle this?
Thanks in advance for your help

uninstall anything cs6 currently installed, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Oracle Patch 10.2.0.4 error - Windows Server 2008 x64

Hello!
Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
*************installActions2010-08-06_11-02-02PM.log******************
Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The number of files bootstrapped for the jre is 551.
The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
INFO:      CLASSPATH =
INFO: Username:Administrator
INFO: Install area Control created with access level 1
INFO: Oracle Universal Installer version is 10.2.0.4.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
INFO: This is not a cluster system.
INFO: Node selection page will not be shown.
INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.patchset.db_Custom
INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
INFO: Checking checkToInstallCCR
     This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
INFO: oracle.ons Product Location: Empty path specified.
INFO: oracle.sysman.repository.db Product Location: Empty path specified.
INFO:
*** Language Selection Page***
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
INFO: *** Entering Component: oracle.ons installation
INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
INFO: User Selected: Yes/OK
*************installActions2010-08-06_11-02-02PM.log******************
**************oraInstall2010-08-06_11-02-02PM.err***********************
Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
     at getOSName.performQuery(getOSName.java:16)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
     at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
     at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
**************oraInstall2010-08-06_11-02-02PM.err***********************
***************oraInstall2010-08-06_11-02-02PM.out**************************
**************oraInstall2010-08-06_11-02-02PM.out*************************

A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
HTH
Srini

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Lightroom 5.3 installation fails (Windows 8.1 x64)

Similar Messages

Maybe you are looking for