Lightroom 5.4 not resizing on export

Anyone any ideas please ... I set 1024x640 ppi in export dialogue but get various output image sizes, 959 × 640, 960 × 640, 853 × 640 I want them all 1024x640, originals vary but are generally hi-res.
Thanks Roger

Roger,
If you want all your exported images to have that shape, you need to start off with images that have that shape.
Think of it this way: if you start with a square image and want to export a rectangle, LR isn't going to read your mind and figure out which pixels to throw away.
You evidently have the same problem. You'll need to crop to a 1024x640 aspect ratio before you do the export. Otherwise, LR will just shrink your image to fit in the 1024x640 box that you've specified. In your case, it makes your exports fit the smaller dimension of the box and lets the other dimension be whatever it is.
When you crop, you can specify a custom aspect ratio of 1024x640 and do your crops. LR will probably reduce that to 8x5, but that's just the ratio expressed in lowest terms.
Hal

Similar Messages

Make a video smaller within iMovie (not resize for export)

I am trying to fit a clip within another clip which has chroma keying. Video "A" is a video clip of people watching a TV screen. The screen portion of the TV has been chroma-keyed. Video "B" is the actual footage of the event. I want to fit video B within the simulated TV screen in video A. I know that Premier can resize videos but I am not sure if you can do that on iMovie.
Thanks,
FG

Fernando Gottlieb wrote:
.. I want to fit video B within the simulated TV screen in video A. I know that Premier can resize videos but I am not sure if you can do that on iMovie.
FinalCutExpress would allow that too, incl. making the insert perspective..
ok, iM:
no.
but a workaround... :
• create in any paint-app a black.jpeg (or any other color)
• add that to a new project
• add your 'TV signal' as pic-in-pic
• re-size * that … => now, your TV-signal is in right place and right size ..
• export project, re-import to your original project, use Greenbox to 'overlay' ..
to * find the right position, export a freeze from your original project to your paint app, add 'markers' ..
re-reading this let me assume, I should illustrate that .. I'll be back in a minute ..
Message was edited by: Karsten Schlüter

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable.

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!

I have an Edit In - Photoshop option, but not an Export - Photoshop option.
Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected. I assume this is not the problem, and that the photo is selected.
Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset.

Cannot export my D800 images out of lightroom, message reads not enough memory. Anyone any ideas how

cannot export my D800 images out of lightroom, message reads not enough memory. Anyone any ideas how to fix this?

Is it Win7 32-Bit (that's where I've seen it happen). I would report it as a bug at the official Adobe site:
http://feedback.photoshop.com/photoshop_family
Beat

Lightroom 5 adjustments not showing in Photoshop CC

Until a few days ago, when I choose "Edit in Lightroom" my RAW files (NEF) would show up in Photoshop with the Lightroom adjustments (without a warning dialog), but somehow this changed. When I open an image in Photoshop from Lightroom it does not show all adjustments. Also when I open the image as a smart object the Lightroom adjustments are ignored. As far as I know I didn't change any settings myself. I have the most recent versions of Lightroom 5 (5.3) and Photoshop CC (14.2). I've read some older solution for this problem by resetting the warning dialogs, but that didn't help. Anybody else experiencing this problem?

Hi Geoff and all pf you. Here my idea about the problem that me too I am experiencing . Now, this is what I think, after a litlle recap:
-If I crop an image, this will "simply" not be open in PS at all via CMD +e .
-If I use a graduated filter in LR , the exported image in PS is almost all black.
-If I use some brush, the image opend in PS wont show the edits made in LR
-If I export the image via "export button" to create a Tiff or PSD file and open this file with PSCC, then (SO FAR ) it opens in PS in a correct way i.e with all edits had been made in LR 5 or 4
I run a
maverik 10.9.1
LR5 5.3
LR 4.4
PS CC 14.2 x64
Cam Raw 8.3.0.141
The interesting thing came to my attention when I tried to replicate my (our) problems on 2 friends machines . They had no problems at all
1 friend has a
Mac 10.8 lion
LR 5.0
PS CC 14.2 x64
Cam raw 8.3.0.141
2nd lucky friend has
Mac 10.8 Lion
LR 5.3
PS CS 6
Cam raw 7.7
my idea? I hope to be completely wrong but this sounds to me like a MAC Maverik problem. If this is the case we can kiss our back a nice goodbye because none ( apple -adobe) will find a solution. I hope that some Win user or Mac lion installed machine comes up saying they have problems too. I ll be sorry for them , but this could be the worst ever scenario.
PS Just noticed Simon G E Garret up the thread here has NO problem and he s running a window machine.....

Movie Poster Frames Not Maintained in Export?

I've been setting Poster Frames on all my LR5 videos with the assumption that they would be maintained when i export my videos, using LR5's native export function. I'm now noticing that the poster frames are *not* maintained in the export files. Has anyone else experienced this? I am exporting using H.264 compression, set to Max. I also have checked the option to maintain all metadata in the export dialogue. Any other suggestions?

UPDATE: I noticed that the poster frame of the export is maintained when I view the exported file on my Apple TV, pulling from my home server. But the strange thing is that Lightroom itself does *not* maintain that poster frame when viewing the exported clip within Lightroom. Any ideas why that would be? The exported file is not in the same folder as the original, but that should not make a difference, I wouldn't think. Seems like a bug.

ARE1 creation error - "excise Invoice is not meant for Exports"

Hello Experts
We are working on ECC 6.0.
We were so far dealing with domestic sales and now have to start with exports (ARE1)
I've gone through many threads and all major configuration has been done according to J91 Block Builder. But I still have doubts.
1. While doing billing for export sales, when should excise invoice be generated. When generated then should it posted with accounting entry?
2. We've created a Running Bond & on test basis we have done billing and excise invoice (DLFC) has been generated along with billing.
But when we try to create ARE1 (J1IA101) with reference to above Official excise invoice, we get the message 4F242 ( 00090006 / 2008 excise invoice is not meant for exports). We've noticed in table J_1IEXCHDR for the above excise 90006 that the field Export Type is blank which should otherwise be B (Export under Bond). We have updated manually in the table as B to test and we are able to move ahead.
3. If we dont generate the excise with billing and try to do it in J1IIN, under utilisation even after changing the type from Local to Export only DEEMED Exports is highlighted in blue and could not be turned to BOND type.
Please suggest.
Kapil

Dear Kapil
when should excise invoice be generated
Once you generate delivery related (document type F8) proforma or commercial invoice, you should generate excise invoice
When generated then should it posted with accounting entry?
No excise entries should not be posted to accounting for export sales
excise invoice is not meant for exports
First ensure that you have a separate series group for exports.
Next in case of your Excise Invoice Type dont have any of the following, then system will throw that error
- Deemed export
- Export under bond
- Export without bond
- Export under Letter of Undertaking
Check whether the excise invoice type is generated with any of the above
thanks
G. Lakshmipathi

Excise invoice is not meant for exports. Message no. 4F242

Hi All
As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
while Creating ARE - 1 document through T.Code J1IA101 it thronging ERROR
0020000023/2008 excise invoice is not meant for exports
Please give me u r suggestions
Thanks in Advance
Madhu

Dear Madhu,
As per your thread system is telling that invoice is not relevant for the exports so,
Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
I hope it will help you,
Regards,
Murali.

Hyperlinks do not work when exporting to PDF (Crystal and Visual Cut)

I have a question about Crystal Reports XI Release 2 and Visual Cut 11. I create reports in Crystal and export them using Visual Cut. Some reports contain hyperlinks to files on a network drive. However, the links only work while in Crystal. The PDF files that are printed through Visual Cut display the links, but they are not clickable. How can this issue be fixed?
In case it helps, the links also work when I export reports from Crystal to HTML, Word, and Excel, but not when I export to Acrobat. I believe it is a problem with tagging/accessibilityfeatures. So is there a setting/formula in Crystal or Visual Cut that would allow the exported PDF files to be accessible?

While Crystal exports to pdf indeed lose hyperlink functionality (both in Crystal as well as in Visual CUT), Visual CUT allows you to use Crystal formulas (acting as hidden Tags) to create hyperlinks in the resulting pdf file. Another option supported by Visual CUT it to automatically detect file references in the pdf text and turn them into hyperlinks. Contact MilletSoftware for more detail.
Edited by: Ido Millet on Oct 27, 2010 5:11 PM

Not able to export web analysis report to excel smart view from workspace

Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issues

I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

Crystal report not able to export in EXCEL file in windows 7

Hi Expert,
I have an Form, in which there is a button print. when I press Print button Crystal report open with data. upto here is fine with any operating system (OS).
When I press Export report in XP it working fine, ShowDialog is show on screen where I have to save this file. but When I run as application on windows 7 I got below as error
Current thread must be set to single thread apartment (STA) mode before OLE calls can be made .......
rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptView.ReportSource = rptDoc
            rptView.Show()
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = False
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer"
            oFrm.ResumeLayout(False)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
Can you please tell me why is I am not able to export report on windows 7 thru Crystal report
Thanks
Kevin

Hi Kevin,
You may check: Error in Export to PDF for crystal reports
Thanks,
Gordon

Crystal Report (visual studio 2005)-Hyperlink not working on exported PDF

I have created a crystal report by using VS 2005, there are some hyperlinks inside the report.
After i exported the report to PDF, I check the PDF file, none of the link contains inside the PDF file.
It seems a bug, i google this issue, some people can export to RTF first and then in RTF save as PDF, then the link should be there. I tried it, it works, but it totally mess up my report layout.
Please advise,
Tommy

Typing the terms "pdf export hyperlink crystal" in the search box at the top right corner of this page comes up with the following KB (5th hit):
[Hyperlinks to files do not work when exported to Portable Document Format (PDF)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333633363337%7D.do].
"Messed" up report export to RTF does not tell me much either. A link to a screenshot will be great.
Also, what CR Service Pack are you on?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"

I am working on ECC6 version of sap i am trying to create the ARE1 but it give the error as '0000500001/2007 excise
invoice is not meant for export'.I am trying to debug the program i thing the sy-msg type it catch that is e thats y it
goes to other loop pls help me out .

Dear Sarthak,
I have already maintained the number range object earlier, Still i verified it and number range object is present.
The error is not due to this Number range object.
The error is still there, Pls help.
Regads,
Arunava Sahana

0000000003/2007 excise invoice is not meant for exports.

WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR
0000000003/2007 excise invoice is not meant for exports.
Message no. 4F242

Hi murali,
Do you got any solution to your problem
if you got kindly inform me
cheers
bvdv

"Excise Invoice is not meant for Exports".

Dear All,
I am facing a problem while creating ARE1 for Export Sales.
At the time of creation (Tcode - J1IA101), when i am giving the outgoing excise invoice number, in the given field, system is saying that "Excise Invoice is not meant for Exports".
Whereas I have maintained seperate Series Group for Domestic as well as Exports.I have checked No.ranges as well, where I have found that, the Outgoing Excise invoice number is also maintained in the Number range Objects for Exports.
Can anybody suggest how to resolve the issue.
Rgds,
Indrajit

1.Check the Series Group is Maintained for Domestic and Exports
2. Maintain the number range in T.Code SNUM - Object "J_1IEXCEXP"
3.Ensure that the excise invoice number you referred is created for an export billing document.
4.Then go to J1IIN, check on the utilisation screen whether invoice type has been changed from Local to the respective export excise invoice.
5. Maintain the Bond with T.code J1IBN01 respective Plant and the Value with from to date
6. Cretae the ARE 1 through T.code J11A101 check the Excise Invoice No and the Amount
7. Check the Excise duty(BED) , E cess and Hr Edu Cess value is apperaing if not you have apply the Snote .
thanks
MJP Michael Joseph

Lightroom 5.4 not resizing on export

Similar Messages

Maybe you are looking for