Lightroom 5.5 doesn't recognize 'Shift + numeric keypad number' keyboard shortcuts in windows 7

Some Lightroom keyboard shortcuts, e.g. color labels recognize the numeric keypad on my windows pc. When I press 6 it sets the color label to red. According to the keyboard shortcut guide, pressing Shift then a number key should set the color label and move to the next photo. Instead, when pressing a number on the number keypad it recognizes Shift + 6 as a directional arrow, as printed on the key below the '6' and simply moves to the next photo without setting a color label on the first photo. The same applies to the 1, 2, 3, 4, 7, 8 and 9 keys on the keypad. They all have a directional function associated with them.
I do not have this problem when pressing Shift + a number key along the top of my keyboard. These combinations work as expected.
Does anyone know how I change the number keypad to behave the same as the number keys at the top of my keyboard?
Thanks - Michael

Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.

Similar Messages

I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files. I have downloaded plugin for the camera, but it still doesn't work. Can you help?

I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files. Can someone help? I have downloaded 8.3 from Adobe, but still doesn't work?

Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image?

Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image? The similar keyboard shortcut to assign stars works, but the shortcut to assign a label color doesn't?

Just to be sure they haven;t been reassigned in your Aperture go to Aperture->Commands->Customize then in the search box in the upper right hand corner enter color.
You should see the keyboard shortcuts and the corresponding add label commands.
If they are set then quit Aperture move you preference file to the desktop and restart Aperture. The instructions for moving the preference file can be found at Aperture 3: Troubleshooting Basics
Post back the results
Message was edited by: Frank Caggiano - Added preference file move

Numeric Keypad USB Keyboard

Hello,
As my Alias says it, I am new to Mac. I purchased an external keyboard which has a numeric keypad. The MacBook and the external keyboard have the French Canadian layout.
When I use the numeric keypad, the comma/period key defaults to comma. To get a period (i.e. decimal point) I have to use Shift+[,] or [CapsLock]+[,]. Is it possible to set the default action to a period and the alternate action to comma?
Thank you

Thank you for the tip.
And unfortunately you were right. I tried many keyboard configurations and none would give me the period without loosing the french Canadian keyboard layout. Another funny thing is that the caculator will accept either the comma or the the period as the decimal separator. In Spotlight only the period is valid as a decimal separator.
Maybe this should be a feauture request for an upcoming keyboard driver update.

HT5636 need mac numeric keypad to work on a windows program in boot camp

I have an iMac and am trying to use my wired numeric keypad on a windows program running in bootcamp. how do you make this work?

Do you have BC drivers installed? Is there a Control Panel -> System -> Boot Camp option? In the Boot Camp panel, do you see the following options?
The drivers should be similar to the following in Device Manager.

Missing numeric keypad & Character Styles shortcuts

Hello everyone,
Is there a way of activating the keyboard shortcuts we customized for Character & Paragraph Styles using the new Mac keyboards that don't have numeric keypads? Without the numeric keypads, one has to open Character/Paragraph Styles panel and click on the desired shortcut, which is tedious.
We're using ID5.
Thanks.

Discussed yesterday (and a couple of times before). Pity 'Search Forums' does such a crappy job; it ought to show you Shortcuts in the Imacs...

Lightroom 4.4 doesn´t recognize Nikon D7100 Raw files

I installed the new 4.4. update on my OS X. I thought it should have fixed the problem with the raw files of my new D7100. But it doesn´t seem to work. Lightroom still can´t import the raw files (NEF) from D7100. "The files are not recognized by the raw format support in Lightroom".
What should I do??

Did you use Nikon software to transfer the photos to your computer's hard disk? this has been known to interfere with Lightroom import.
If you still have the photos on the camera card(s), try importing those.

Lightroom 3.6 doesn't recognize files when I try to import

I'm trying to import RAW files shot from a friend's Canon 5D Mark III, but have been unsuccessful. It gives me the message "the file is from a camera which is not recognized by the raw format support in lightroom"
I normally import RAW files from my Canon 7D, but for some reason it's not recognizing these files.
How can I fix this?
Thank you.

Hi Rikk,
Thanks for answering.
I downloaded and installed the DNG Converter 7.1, then opened Lr again, but it's still not opening the files. Am I doing something wrong?
Please advise.
Thank you,
Joel

Lightroom 5 suddenly doesn't recognize my serial number.... Help?

I get this message when I try to open lightroom on my computer (I've had lightroom 5 installed on this computer for a full year, and not the cloud version):
"The serial number you entered is invalid. Please try again."
It won't ever work. It is the correct serial number.
Help is appreciated!

I was using the trial version, which recently ran out. Loved the software, so a couple of hours ago I purchased a standard license via download from Amazon.
Amazon sent me what appears to be a valid license key (6 groups of 4 digits). But Lightroom will not accept the key, with the exact same error message as you in your post.
I've sent Amazon an email message. Meanwhile, I have phoned Adobe Support...and I have been on hold for over an hour, without being able to speak to a live support agent. Your phone sucks, Adobe.
I wonder if something's gone wrong with their licensing/validation system.
Adobe?

SP3 doesn't recognize my BT mouse or keyboard

I recently updated to Boot Camp 2.1 and installed XP SP3. When I rebooted into SP3 for the first time neither my BT mouse or keybaord worked and I had to use the trackpad to get around.
I have a Logitech MX900 mouse and the older style Apple keyboard, both of which worked fine under SP2.
If I open up Bluetooth settings and add a device, it sees both my keyboard and mouse and it says it successfully adds them. Both devices are listed, but not labeled as "connected". They just state "no passkey". If I close the BT Setting window and open it again, they are both gone!
I've already tried doing a repair/re-install of Boot Camp 2.1 to no avail. What else is left to try?

See my reply here. http://discussions.apple.com/thread.jspa?threadID=1657888&tstart=0
There is something wrong with XP SP3 and wireless encryption. My solution is to downgrade to XP SP2 if you can where it all works fine. Can you connect your keyboard and mouse without using passkeys perhaps?

Lightroom new download doesn't recognise my special printer profile

I loved every second on the beta version of LIGHTROOM and happily used a special printer profile for Canon Pixma MP950.
Now,I downloaded the new Lightroom and it doesn't recognize or accept my profile. Instead it uses a generic BJ Color Printer Profile 2000 or the profile for Canon MP 950(which I didn't like).
The difference seems to be that previously I was able to select "colorsync" under "colorsync" during setup. Now the only option is "standard". If I choose "none" under "Color Correction" , the program chooses "BJ Color Printer Profile 2000". If I choose "Colorsync" the program gives me the "Canon MP950 PR!" profile.
Could you ,please. advice me how to proceed. I was so satisfied with the beta and so disappointed with the new download.

Okay, I have successfully printed a test page frm the printer itself. It did work correctly with my PC and connected to the PC network that I had previously set up, so I'm pretty sure that ther printer itself is good in terms of being able to print and also it's network capabilities. I also double checked the network password that I entered when I connected the printer to the time capsule network and it said that it did set up a connection point correctly. After I did this I tried to print something from the mac again and it simply isn't bringing up the printer details as already there, or when I try to add a new printer.
So now I'm at a brick wall and have no idea how to get through / over / round it. Please help anyone.

Itunes doesn't recognize my iphone 4

I just updated my itunes to 10.4.1.10. Now when I plug in my iphone 4 to sync, itunes doesn't recognize it. I"m using a PC - Windows 7. This happened last time I upgraded, and I had to take my computer and my phone to the Apple Store. Help!!!

Try this article, it may help.
http://support.apple.com/kb/TS1369

Adobe Premiere 13 doesn't recognize my DVD burner

I am running Premiere 13 and am trying to burn a DVD. I can burn the project to a folder, but cannot burn directly to a DVD. The program doesn't recognize my DVD burner. When I use Windows Explorer to copy the files to a DVD, the DVD will not play in my DVD/Blue Ray player. The player recognizes the DVD -R format, but shows a blank screen, even though I have created the project with menus. Any pointers would be appreciated. I am running Windows 7.

Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements 13 WILL write a DVD or BluRay to an ISO (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Using new wired keyboard (w/o numeric keypad) with Windows Vista

I have a 2008 Mac Pro and a Windows PC. They share the same monitor, keyboard and mouse via a KVM switch (I use the Belkin Flip DVI-D KVM Switch, model F1DG102D). My keyboard is the Apple wired keyboard with numeric keypad, which works fine with my Windows Vista PC, even with no Apple-specific Windows driver installed. My keyboard tray is pretty small, so I would like to get the new Apple wired keyboard which doesn't have a numeric keypad. I don't need the numeric keypad anyway. However, I will miss the home, end, page up, page down, and forward delete buttons. The Mac Pro has a way of simulating these keys. However, the key combinations to simulate these keys don't work in Windows Vista. My question is: how do I simulate these keys from Windows Vista? My guess is that possible options are:
1. Use some Vista keyboard mapping software. If so, any idea what might work?
OR
2. Use Apple's keyboard driver for Windows Vista (32-bit). The keyboard comes with boot camp, but I don't use boot camp (since I have a separate Windows PC). How do I go about getting a standalone Apple keyboard driver without having to install boot camp?
Any suggestions would be greatly appreciated. Thanks!

Hi randman.
I have a similar problem but it seems there is no solution. The new wired keyboard is not event working properly with BOOTCAMP. Vista doesn't recognize the keyboard as Apple keyboard and even forcing the device manager to use the Apple keyboard driver is not working.

Why does Lightroom not have custom keyboard shortcuts?

Lightroom is a workflow app. It's not just about raw conversion, which could be done in ACR, but about speeding up the whole process of selecting, editing and cataloging photos.
It seems to me that out of all Adobe apps, Lightroom is the one which should have customisable keyboard shortcuts.
I've been using lightroom since shortly after it came put and I've been using the open-source plug-in keyboard customizer Paddy for several years which works okay at the moment. Each lightroom release breaks Paddy in some way and it's not as smooth as it could be if it was built in. Even so, I estimate I'm 2-10 time faster editing many photos with paddy than I would be without.
I know that even adobe's resources are limited, but adding keyboard shortcuts should be easy, certainly compared to re-verse engineering RAW file formats or fixing complex lens distortions!
At this point it seems clear that Adobe are choosing not to let us customise keyboard shortcuts. I'm not trying to change their mind, but I really want to know w
It perplexes me, why don't Adobe add what seems liek a simple feature which could speed up Lightroom use by an order of magnitude???

On Victoria Bampton's website she has a downloadable PDF file named "Adobe Lightroom 5 Windows Keyboard Shortcuts." (Windows, not sure about Mac). Its about 12 pages long. I assume that this is what you are looking for. www.lightroomqueen.com.

Lightroom 5.5 doesn't recognize 'Shift + numeric keypad number' keyboard shortcuts in windows 7

Similar Messages

Maybe you are looking for