Lightroom 5.5 for Mac Adjustment Brush not working

Hi all, since updating to Lightroom 5.5 for Mac Adjustment Brush has stopped working entirely. I can open the menu and it does display the brush within the menu. When dragging the tool into the image it changes to the mouse arrow which doesn't have any function. Any ideas? Thank you very much for your help. Chris

And- do you actually press or hold down the left-mouse button and drag the cursor on the image? as you would a paint brush. A 'Pin' will appear where you start the brush stroke.
And- Is it possible that you have the switch at the base of the brush panel sliders turned off ? (The toggle switch on the same line as "Reset" and "Close")
Pressing "O" only turns the overlay mask on/off to give a visual indication 'Where' you have applied the brush.
Pressing "SHIFT+O" changes the colour of the MASK overlay- Red, Green, Grey, Clear
"O" does not affect any editing of the image.

Similar Messages

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
   If it doesn’t quit, Force Quit it.
   Press command + option + esc keys together at the same time. Wait.
   When Force Quit window appears, select the application if not already.
   Press Force Quit button at the bottom of the window. Wait.
   Application will quit.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

Lightroom adjustment brush not working

My adjustment brush was working fine, I took a break, and when I came back the brush won't do anything. The pin appears but the image doesn't change. I've tried adjusting size, feather, and flow all over the scale, and I've pushed the exposure down as far as it will go so I can see if anything happens. None of the regular exposure, highlight, shadow... settings are doing anything. It is showing up in the history bar but no change to the image.
I have tried closing and reopening the program and restarting the computer. It's been several days and I still can't get it to work

Try deleting your preferences file
Preference and other file locations in Lightroom 5

Adjustment brush not working on new Mac with Snow Leopard

Just purchased a new computer a couple of weeks ago. Not sure if something is incompatible or something else. I'm can't remember if the brush ever worked on the new machine. Also updated to Snow leopard 16.2 during this period.
I see the adjustment brush and can change it's size and feathering, flow and density are set at 100%, masking is off, it set down control points, but that's it. It makes no visible changes to the image in any mode. If I put exposure at 4 stops and place it on a mid-tone there is no change to the image, either in Lightroom or upon export.
I've run permissions checks, trashed the preferences and repaired the drive with Diskwarrior all to no avail.
Lightroom 2.5, Power Mac 2.66 Ghz Quad Core Intel Xeon, 6 GB of factory installed memory, Snow Leopard 16.2
Should I try a fresh install of Lightroom??

Sorry,
My post above should have read Mac Pro. I recently switched and keep getting the names mixed up. Doesn't help that they look the same.
Rich Quindry

Adjustment brush not working in lightroom 5.7

The adjustment brush sliders don't appear to do anything anymore in Lightroom 5.7. Does anyone else have the same problem?
I don't need workarounds - this should work.
Thanks folks.

And- do you actually press or hold down the left-mouse button and drag the cursor on the image? as you would a paint brush. A 'Pin' will appear where you start the brush stroke.
And- Is it possible that you have the switch at the base of the brush panel sliders turned off ? (The toggle switch on the same line as "Reset" and "Close")
Pressing "O" only turns the overlay mask on/off to give a visual indication 'Where' you have applied the brush.
Pressing "SHIFT+O" changes the colour of the MASK overlay- Red, Green, Grey, Clear
"O" does not affect any editing of the image.

Adjustment brush not working in camera raw cs6

The adjustment brush in Camera Raw PS6 is not working properly. The slider makes a slight change but I can do no local adjustments. All other parts of Camera Raw seems to be working. I have restored the computer. Is there a toggle I do not know about?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Adjustment Brush not working correctly

Since moving to LR 5.6 the adjustment brush has not worked correctly.
I am unable to adjust the size of the brush using the scroll function on my Mac mouse.When I try to do this I can see the slider moving indicating the size of the brush but nothing actually happens.When I try to adjust it using the slider itself again nothing happens.
Has anyone else experienced this problem or can you offer some advise please

The ACR plug-in files for PS-CS6 and PS-CC are in different folders, but the camera profiles and lens profiles are in a common folder. Since updates to ACR are typically handled by the product, itself, not direct-link downloads that you must have saved for ACR 7.1, I don’t know what the error means in relation to CC having a newer ACR.
What version of ACR did you have installed for CS6 before you tried to update to ACR 7.1? Are you trying to downgrade from a higher version of ACR on CS6?
The first thing I would try is install ACR 8.3 RC for PS-CS6, using the CS6-specific link at Adobe Labs.
If you really need to go back to an earlier version of ACR, then the Adobe-approved method is to uninstall PS, entirely, then re-install it to get the older version.
It may be that you have to uninstall both CS6 and CC and then install CS6, first, and get it updated the way you want it, then install CC, again, and update it how you want it. That seems like a lot of work, though.
Why are you wanting to install ACR 7.1 for CS6?
If you plan ahead, then the way you can switch between different versions of the ACR plug-in, is to save your Camera Raw.8bi file each time you upgrade (I rename mine so the extension is the version: Camera Raw_8bi.71 and leave them in the same folder), and just replace whatever version of the ACR plug-in with that one you want.

Adjustment brush not working LR 5

Why isn't my adjustment brush working when it was working before. New LR version 5...had less than one month

Have you made any changes to your computer or updated the OS?
What exactly is happening when you click on the brush tool icon or press the K key to activate it?
If you press the O key to display the overlay can you see if the brush tool is making a mask when you paint on the photo?
Check that you have not set the brush to Erase ; click B for the standard brush or A for a brush with auto-mask edges.
Make sure flow and density is set to 100 unless you wish to gradually build up the effect (flow) or Place a limit on the effect (density)

Adjustment Brush not Working

in the Develop module my adjustment brush is not working, all the other sliders work, what is wrong?

Are you moving the sliders with the "pin" for your brushed area selected? When the "pin" is selected, it looks like a black circle surrounded by a very light gray circle and then a very thin black circle, like this:
What numbers do you move the sliders to?
Did you accidentally turn off the brush adjustments? The little doohickey highlighted in the red box, shown here, should be in the top position
Lastly, I am asking you to perform a very specific experiment, and report the results, and it does not appear that you have done so, or at least, you have not stated clearly that you have done so.
Please, click on "New" in the brush tool, then set Exposure to -4 and Flow to 100 and Density to 100, and brush. Report what happens.

Adjustment Brushes not working (3.0 & 3.2)

While processing some images the other night, using the adjustment brushes, burn, 3 large white squares appeared on the image for a few moments (5 seconds or so) before disappearing.
Since then, the adjustment brushes have no effect what so ever on my images?
Thanks
James

Hi James
After selecting the Adjustment Brush press O (for overlay) so show the area being masked.
You can then move the sliders e.g. exposure, saturation, clarity etc.) to adjust the masked area (usually shown as a red selection).
You can press O repeatedly to toggle the mask on and off.

LR2 Adjustment Brush not working?

I just got Lightroom 2 and have tried over and over to use the adjustment brush, but I haven't seen ANY results. A black circle with silver lining shows up where I click the picture with the brush. I have heard that clicking "O" makes the adjustment show up, but I've tried it and nothing happens. So, help! Am I missing a simple step or something??

Hi Emily,
One of the mask overlays that you get when pressing 'O' and shift + 'O' is clear and makes it impossible to see the results.
Press O to make the mask active and then press Shift O a few times to cycle through the masks.
If you put the exposure at -2 you should see the area darkening as you brush.

Sony bridge for mac RESTORE phone not working after exchange xperia from Sony

Hi everyone,I have been sent an exchange unit from Sony to replace my previous xperia zThis phone has an older imei number than mine and wont allow me to restore using the Sony Bridge for Mac softwareIs this because of the different imei number???i have lots of notes, messages stored in a previous backup using the Sony bridge for mac softwareWhich i need to retrieve onto the "second hand Marked and scratched exchange unit" which Sony have sent me DOES anyone have a sollution to this please Thanks in advance... Steve

Hi Echo_steve Unfortunately, as I expected, you're not able to restore to another phone. However, there is one possible solution, but there is no guarantee it will work and it might mess things upp so you'll have to do it on your own risk. I'm afraid that's the best I can do for now. Here's how to work around the restore block. Again, use this with caution as there's no guarantee it will work. Also make sure Bridge isn't running when you attempt this:- Do a backup of the new phone
- goto ~/Library/Application Support/Sony Ericsson Bridge for Mac/
- Go to the "Backups" folder and find the backup sets
- Try to locate the old backup folder and rename it to the name of the new backup.This can be quite tricky, as the folders are named things like "CB5A1JYXNQ". But basically, if the backup set of the old phone is named "ABCDEF01" and the backup set of the new phone is "ABCDEF02", it should be enough to remove (or rename) the new backup set and rename the old one to "ABCDEF02".
Again, I'm sorry there's no easy fix. Please let me know if it works for you. Best Regards, David

I have LR 3.4 & 3.6... Adjustment Brush not working

I have LR 3.4 & 3.6... The adjustment brush is not working... I see people are having problems with LR 4 and are removing the preferences thing, but I don't see anything about LR 3 with this happening... I have it on my laptop and it doesn't work... So far the PC upstairs is still working... so not sure what happened on the laptop...
How do I fix it here?

There's no effect when I brush over the area.
I've tried exposure, brightness, teeth whitening and iris enhance... None of the changes they should make are showing...
I will try to remember to get a screen shot of the panel tomorrow when I've got the laptop again.

Office for Mac 2011 is not working with Lion.

I have already uninstalled and reinstalled all of the Microsoft files for Office 2011 for Mac, and I am getting the error message below. And, what's more, is that above that it says to check with Microsoft to make sure that Office 2011 is compatible with this version of OS X. So, does ANYONE have ANY ideas on this?
Thanks...
(Start error message)
Process:         Microsoft Word [355]
Path:            /Applications/Microsoft Office 2011/*/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier:      com.microsoft.Word
Version:         14.1.0 (14.1.0)
Build Info:      Unknown-110310~0
Code Type:       X86 (Native)
Parent Process: launchd [252]
Date/Time:       2012-01-21 23:49:54.458 -0600
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          53958 sec
Crashes Since Last Report:           13
Per-App Crashes Since Last Report:   7
Anonymous UUID:                      20618D4B-856C-47F8-B659-34452F49D2AE
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/mbukernel.framework/Versions/14/mbukernel
Referenced from: /Applications/Microsoft Office 2011/*/Microsoft Word.app/Contents/MacOS/Microsoft Word
Reason: image not found
Binary Images:
   0xb0000 - 0x1e26ffb +com.microsoft.Word (14.1.0 - 14.1.0) <16DA90E9-CF43-07DE-0064-8542F079070F> /Applications/Microsoft Office 2011/*/Microsoft Word.app/Contents/MacOS/Microsoft Word
0x8feaf000 - 0x8fee19c7 dyld (195.5 - ???) <BCC83F99-7244-3DBA-867D-6226D53DD9F2> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.100.98.75.18)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

If you want to have the icons in your main Applications folder, use alias icons.
You also need to update it to version 14.1.4, if you move the applications from that subfolder, the update process will probably fail.

Captivate 5 for Mac - keyboard commands not working

I just fired up Captivate 5 for Mac for the first time and am trying to create a recording, but the command+enter key does not stop the recording and instead captures a screenshot. In fact, every command combination I try does that and the only way to stop the recording is to click on the icon in the status bar at the top. What am I doing wrong? I have searched through the forum and help and don't see anyone else having this problem.

If you're talking about keystroke shortcuts in published browser output, the issue is not Adobe's fault but the fact that browsers get first pick of the keystrokes and assign them to their own browser functions.
There is no way to control what the browser will or will not let through from within the Captivate content. Each end user's browser can have different settings.
My advice is to stop stressing about using keystrokes. There are some things that you can achieve when building an application that cannot be replicated exactly when building a browser-based simulation of that same application.

Lightroom 5.5 for Mac Adjustment Brush not working

Similar Messages

Maybe you are looking for