Lightroom 5.5 Import from Catalog very slow performance.

Importing from a second catalog from a shoot is *very* slow with the last version or couple of versions of Lightroom. It's been about 20 minutes and the import is moving glacially slow and is only about 20% done.
Here are as many stats as I have:
iMac 27" 3.5Ghz Core i7, 32G of ram, 3T fusion drive (the late 2013 model maxed out)
Master catalog has 117,000 images in it.
The catalog I'm importing has 948 images in it.
CPU use during the import is 100% used by lightroom (note that the multiple CPUs can go to more than 100% so this means I think that one CPU is maxed out, though LR can sometimes take 500% of my CPUs during an export)
Lightroom is using 4.2G of RAM (10G free in activity monitor)
Hard drive is fairly full, but still has 366G free on it (so about 10%)
Lightroom Mobile sync is enabled (not on this folder I don't think) but says "service unavailable" at this point.
Lightroom is fully up to date (5.5) on both iMac and laptop (also a mac in case that matters). Both are up to date with the latest OS software.
How I did it was:
Export the shoot as a new catalog on my iMac
Transfer it to my laptop (smart previews only, no masters)
Edit images, metadata, etc
Transfer the entire folder back (.lrcat, previews, smart previews) to iMac
In my master catalog do an import from catalog
Waited for ages for checking for dupes (which I can understand with such a big catalog)
Selected to import all, changing metadata and develop edits, and selecting to put new images in the folder (not sure why it asked as there weren't any new images)
The last time I did an import I started it and then went out somewhere so I didn't notice how long it took, but this seems completely crazy. In the time it's taken to write this up it's now about 20 minutes later and the progress bar is maybe at the 33% range. It's still working away, it's just crazy crazy slow.
Anything to help out or debug would be greatly appreciated. I suspect it's pure size of the catalog, but 120k isn't outside the realm of what I've heard people say works fine, or maybe the Fusion drive (maybe the OS is trying to move files around behind the scenes)?
Either way this didn't seem to be an issue until the last couple of versions (I haven't gone and re-installed 5.4 or 5.3 to check) and it's starting to really frustrate me

Hi Jim,
Great suggestion! It opens perfectly fine on its own. I even went as far as re-exporting it once it loaded but am still experiencing the same issue. That same catalog loads perfectly fine on my assistant's iMac.
I can't really think about anything that changed in my environment with the exception of a new Bootcamp partition to run windows on an external Thunderbolt HD but I doubt this is related.
I'm open to any suggestions while I am trying this again... 10 minutes of 'Checking for changed and duplicate photos'.

Similar Messages

I keep getting the error: "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

This is a duplicate thread - see here

How to solve the error: "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John

Import from Catalog -- how?

Every year I go on vacation and take lots of pictures, create a catalog of them on my notebook, and every year I fight with getting them into my main Lightroom catalog. I have almost 4000 photos to import in 37 directories.
This year I decided to try to do it the "right" way. I tried Import from Catalog. There is very little information about this feature in the help. I want to maintain what I've done on my notebook including the tree structure. I pointed to the catalog and LR said OK, fine, what do you want to do. I selected to move them and pointed to the new directory I had created for the tree structure. It started to import and it was clear it was completely ignoring my folder structure and was going to import almost 4000 photos into the single directory. So I stopped the import.
Last year I imported the catalog leaving the files where they were and then intended to move the directories. That worked, except since it plopped the new directories at the top level of my LR hierarchy, I had to move each folder individually, which was a pain. Especially since I think moving folders is only via drag and drop, so I had to drag from the top, letting it scroll to where I wanted it, each time. That might not happen this time because I have a directory above the 37 subdirectories, but it can't be the "right" way to do this.
I can't believe that many many people are doing this and succeeding. What am I missing?
Judy

It's done. This time I had a top level directory in the catalog so it was easy to move the directory tree. However, LR is very slow to move files, so if I had it to do again, I would have copied the files outside of LR and then repointed LR. The other thing is LR does a MOVE, which means it deleted my originals. For me, it was a copy already, so that didn't matter. If I do it myself, I can do a copy rather than a move.
It is done, but this is surely not the correct way!
Judy

Import from catalog problems

Cannot import from catalog, LR quits and I get about 2 or 3 photos imported.
Adobe was no help, they had no idea why.
Have tried to "import from Cat" twice. Moving two different catalogs into my main desktop catalog. Both did not work.
All three catalogs ( two from laptop and my main LR cat) work fine and I can import photos no problem.
Would like to import all the changes of photos that I have made with these two catalogs that I did on my laptop. (Both cats are on an external hard drive).
Thoughts anyone?
I am having some issues with my video card. Screen right now is a bit pink. This would be the fourth video card I will need on this Mac Pro. Would this be the cause?
Thanks.

flyboys911 wrote:
Do I need to export the laptop cats if thy are already on a separate hard drive?
It might help. Exporting a catalog sometimes cures corruption in the original catalog. Try exporting into a new catalog and then importing the new one on your desktop.
Never heard of the last thing you mentioned. Can you describe more?
Lightroom has a preferences file, which sometimes gets corrupt and can cause all kinds of weard behaviour. You can delete (or rename away) the preferences file, and LR will build a fresh one when started. If you rename it, you will still have it if you decide you want it back.
To rename the preferences file, rename the file
"[username]/Library/Preferences/com.adobe.Lightroom3.plist"
to something like
"[username]/Library/Preferences/com.adobe.Lightroom3.plist.old"
while LR is closed and restart LR.
Beat

Import From Catalog Not Importing

Hi,
I'm using LR 3.4.1 on an 2.8 Dual Core imac running Osx 10.5.8 and 4 gigs Ram.
Im new to LR but have used photoshop (and teach it) for many years so not a complete novice.
Anyway I have decided to import all my ctalogs into a single blank Master one as I can see this will be much more convenient.
I have imported 1 catalog so far using Import from catalog >I then get a preview and option to uncheck or check files I want > then I select>Add new photos without moving.
This worked a treat and I have appeox 55,000 images so far in the Master catalog.
I now want to add another 2 external drives which I also already have catalogs for BUT after selecting >Add new photos without moving nothing happens.
Have I reached a limit of how many images can be in one catalog ? I don't think so.
All my images are keyworded but I'm not sure this makes a difference although I did read something somewhere that this can cause problems with version 2.
Any suggestions? I have trashed my pref file but still no good.
Cheers,
Simon Plant

I just found that right clicking the folder and choosing, "Find Missing Folder..." moves it to the correct location in the Lightroom folder list, but this seems, to me, like a pointless step to have to make...

Lightroom could not import this catalog because of an unknown error.

OS 10.5.8
(gb mem
I have recently exported a catalog from my main database (on a mac) with about 700 photos. Including negative files
We opened the catalog on a PC machine in the same version of lightroom. 3.5 camera raw 6.5. The images were given new keywords and then exported as a Catalog including Negative files.
The original catalog has been deleted from the main database on the Mac.
The Catalog with the new keywords saved across the network to the Mac.
Permissions are open to everyone on the folder the Catalog is in.
When I try and import the catalog in lightroom I can see the thumbnails,
However get this message. I’ve lost many hours trying to get the catalog bak into the main library.
I can open the catalog on its own in Lightroom, just when I try and import the catalog I get the bellow message.
I’ve tried importing saving to a new location
Importing not moving the files
Lightroom could not import this catalog because of an unknown error.
I see others have had similar problems however do not see a clear answer.
Has anybody a solution?
Thanks Patrick

I'm having this issue as well, and honestly I've *never* been able to get "import from catalog" to work. In my case I have a catalog created on my Windows 7 laptop in LR3.5. I've copied it to an external drive, plugged it into my PC running Windows 7 with LR3.5. And I get the "could not import this catalog because of an unknown error" message.
I've confirmed every image in the catalog I am trying to import is accounted for and isn't "missing". There are no duplicate images between the exported catalog and the one I'm trying to import in.
Thoughts?
Neil

Freeze on "Import from Catalog" at "Checking photo locations"

Hi there,
Before going away, I exported a LR catalog with a subset of my images from my desktop machine onto my laptop. I added additional images to that laptop catalog while I was away, and now want to re-import them into my desktop machine catalog.
Steps taken:
1) Copy catalog from laptop, with all supporting files and the image files, to desktop machine.
2) Open that catalog on the desktop machine, confirm that it can access and read its own images.
3) Open primary catalog on desktop machine.
4) Select "Import from Catalog" under the "File" menu.
Problem:
Rapidly makes duplicate copy of the catalog, then moves on to say "Preparing to Import from Catalog: Checking photo locations". It rapidly moves up to about 35% of the progress bar complete, then hangs there and does not progress no matter how long I wait (i.e. even leaving it sitting there overnight)
Any ideas?
(Mac OS X 10.5.2, Mac Pro 2 x 2GHz Dual-Core Intel Xeon, 4Gb RAM, Lightroom 1.3.1.)

Hi there,
Before going away, I exported a LR catalog with a subset of my images from my desktop machine onto my laptop. I added additional images to that laptop catalog while I was away, and now want to re-import them into my desktop machine catalog.
Steps taken:
1) Copy catalog from laptop, with all supporting files and the image files, to desktop machine.
2) Open that catalog on the desktop machine, confirm that it can access and read its own images.
3) Open primary catalog on desktop machine.
4) Select "Import from Catalog" under the "File" menu.
Problem:
Rapidly makes duplicate copy of the catalog, then moves on to say "Preparing to Import from Catalog: Checking photo locations". It rapidly moves up to about 35% of the progress bar complete, then hangs there and does not progress no matter how long I wait (i.e. even leaving it sitting there overnight)
Any ideas?
(Mac OS X 10.5.2, Mac Pro 2 x 2GHz Dual-Core Intel Xeon, 4Gb RAM, Lightroom 1.3.1.)

Very slow performance in Lightroom 3??

I just upgraded to Lightroom 3.0 and I am very suprised how slow it is!?! I don't have a very large library and I'm on two reasonably new computers yet the difference from Lightroom 2 (snappy performance) to Lightroom 3 (VERY sluggish) is quite suprising..
I'm using it on a XP and a Vista system with the same results...
Is anyone else experiencing this???
Thanks,
Ken

I've noticed a slow down in performance with Lightroom 3 as well. As far a looking around the forum for older threads, ...found older lightroom 1 and 2 threads.
Your Title "Very Slow Performance in Lightroom 3??" fits what I'm looking for just perfectly.
Jim

LR3: Import from catalog over a network?

Just upgraded to LR3 on two networked Macs. LR2 catalogs have been upgraded to LR3 format by launching LR3. Both catalogs seem to work properly with their local application. When I try "Import from Catalog" from Mac1 to Mac2 over the network, I get this error message: "Lightroom can not import from this catalog. The catalog does not appear to be a valid Lightroom catalog." However, catalog import appears to work properly with the reverse case: importing from Mac1 to Mac2.
Can anyone give me any ideas on how to proceed with the Mac1 catalog apparent defect? Tried reoptimizing again without success.
Thanks.

Hi Bert,
Thanks for the reply. No, permissions on both ends were fine. For some reason, rebooting both Macs allows importing now. No change to the catalogs (or permissions) between working and not working - just a reboot.
Strange...
John

Import ABAP running very slow

guys, I am installing IDES EHP4 on a solaris box with oracle 10g. The import is running very slow. in 20 hours, it has only imported 10 out of 105 jobs. Top comand shows i have 26 GB free physical memory (out of 48GB total) and also 123 GB free swap out of 150 GB total. CPU load is also only 3 %. I have already configured the project file acording to sap recommedation. MY oracle init file configuration looks like this. Also, you will see my project and user_attr files below. Please advise what i can change tomake things go faster.
# (c)Copyright SAP AG, Walldorf # # @(#) $Id: //bc/701-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/INITSIDBASE.ORA#1 $ ########################################################### ########################################################### # PART I, TUNING PARAMETERS # ########################################################### #### SYSTEM GLOBAL AREA BUFFERS # Total System Global Area = sum(bytes) of all caches # Variable Size = shared_pool_size (approx.) # Database Buffers = db_block_buffers * db_block_size # Redo Buffers = log_buffer # # unit of shared_pool_size: bytes # unit of db_block_buffers: number of cached blocks # unit of log_buffer: bytes shared_pool_size = 2264924160 # 10% of shared_pool_size shared_pool_reserved_size = 226492416 log_buffer = 1048576 #### MANAGING SORTS # A small sort requires sort_area_retained_size in # memory. Larger sorts are allocating segments in # PSAPTEMP. They are using sort_area_size in memory. sort_area_retained_size = 0 sort_area_size = 2097152 #sort_spacemap_size = 512 #### PGA-PARAMETERS open_cursors = 800 #cursor_space_for_time = true #### LOCKS # dml_locks = processes * 50 dml_locks = 4000 #enqueue_resources = 8000 #### CPU-PARAMETERS #spin_count = 200 #_cpu_count = 4 #### TUNING ARCHIVING #log_archive_buffer_size 127 #log_archive_buffers 4 #### USE VECTOR READ #use_readv = true #### OTHER TUNING PARAMETERS #sequence_cache_entries = 100 #sequence_cache_hash_buckets = 89 ########################################################### # PART II, CHANGEABLE PARAMETERS # ########################################################### #### CONTROL-FILES # the controlfiles should be mirrored to every new # database mount point @SAPDATA_HOME@/sapdata<#> #control_files = XXXXX #### AUTOMATICLY STARTED BACKGROUND PROCESSES #### MANAGING LOG SWITCHES # checkpoints occur only when switching logs, if # log_checkpoint_interval * size of OS blocks > size of # the actual redo log log_checkpoint_interval = 0 #log_checkpoint_timeout = 0 #### PROCESS-PARAMETERS # The number of allocated semaphores is equal to the # number of processes # sessions = 1.2 * processes processes = 500 sessions = 600 #### AUDITING AND STATISTICS # sql_trace=TRUE # audit_trail = true # db_block_lru_extended_statistics = 1000 # db_block_lru_statistics = true ########################################################### # PART III, STATIC PARAMETERS # ########################################################### #### DB-NAME db_name = XXX #### DB-BLOCKSIZE db_block_size = 8192 #### DB-FILES db_files = 254 #### OPTIMIZER MODE #optimizer_mode = choose #optimizer_search_limit = 3 #### PATHS / DESTINATIONS / TRACES # /xxx\ : trace files of the background # processes # xxxx /saptrace/usertrace: trace files of the user processes # log_archive_dest is a destination, not a path. # The archivefiles get the name # XXXXXXX background_dump_dest = xxxx user_dump_dest = xxxx core_dump_dest = /xxxxx log_archive_dest = xxxxxx #log_archive_format = %t_%s #### OTHERx # reduce_alarm only supported on HP #reduce_alarm = TRUE #### ORACLE OPS PARAMETER remote_os_authent = true # retention time for RMAN backup information in control file control_file_record_keep_time = 30 #see SAP note 124361 #db_file_multiblock_read_count = 8 log_checkpoints_to_alert = true #### OPTIMIZER MODE #optimizer_index_cost_adj = 10 #### AUDITING AND STATISTICS #timed_statistics = true compatible = 10.2.0 parallel_execution_message_size = 16384 query_rewrite_enabled = false replication_dependency_tracking = false star_transformation_enabled = true undo_retention = 43200 undo_tablespace = PSAPUNDO undo_management = AUTO pga_aggregate_target = 3019898880 sga_max_size = 84529848320 db_cache_size = 4264924160 job_queue_processes = 1 remote_login_passwordfile = exclusive recyclebin = off event = "10191 trace name context forever, level 1" FILESYSTEMIO_OPTIONS = setall OPTIMPEEK_USER_BINDS = FALSE BTREE_BITMAP_PLANS = FALSE INDEXJOIN_ENABLED = FALSE INMEMORY_UNDO = FALSE OPTIMIZERMJC_ENABLED = FALSE SORTELIMINATION_COST_RATIO = 10 TABLELOOKUP_PREFETCH_SIZE = 0
USER_ATTR FILE --- I have replaced my sid with SID for privacy reasons ************************************
adm::::profiles=Log Management lp::::profiles=Printer Management postgres::::type=role;profiles=Postgres Administration,All root::::project=MYSID;auths=solaris.*,solaris.grant;profiles=Web Console Management,All;lock_after_retries=no;min_label=admin_low;clearance=admin_high SIDADM::::project=SID oraSID::::project=SID
************************************** PROJECT FILE --- my sid replaced with 'SID'*********************************
system:0:::: user.root:1::::process.max-file-descriptor=(basic,65536,deny),(priv,65536,deny);process.max-sem-nsems=(priv,512,deny);project.max-sem-ids=(priv,512,deny);project.max-shm-ids=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny) noproject:2:::: default:3::::process.max-file-descriptor=(basic,65536,deny),(priv,65536,deny);process.max-sem-nsems=(priv,512,deny);project.max-sem-ids=(priv,512,deny);project.max-shm-ids=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny) group.staff:10:::: SID:400:SAP System SID:SIDadm,root,oraDBSID::process.max-file-descriptor=(basic,65536,deny),(priv,65536,deny);process.max-sem-nsems=(priv,512,deny);project.max-sem-ids=(priv,512,deny);project.max-shm-ids=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny) **************************************************************************************************************************************
what can i do to make the import faster ? my system definitely has enough resources but i am not able to utilizethem all. Thanks in advance

You posted this in two different forums and it is not allowed.

Import from Catalog- Why is metadata changing?

Whenever I run Import from Catalog (going from portable drive to desktop), the dialog box shows several photos that have been "modified," even though I haven't touched them since they were last imported to the desktop. I'm guessing, the desktop install of LR is finding metadata changes in some files. In fact, some thumbnails even show the "metadata changed" badges even though I haven't touched them.
I'm using LR 3 Macintosh, and want to share catalogs between my laptop and desktop using Import from Catalog. I consider my desktop the "master catalog" and mainly use the laptop for capture or editing when I'm traveling. The laptop catalog and photos are stored on a portable drive.
Here's what I did to try to isolate the problem - all of this was executed on my desktop machine so the LR settings should be identical:
1) Created a new catalog on the portable drive while attached to desktop.
2) Restart LR with new portable drive catalog active.
3) "Import to catalog" and import 10,000 photos to portable drive from the desktop catalog. This ran with no problems as expected.
4) Restart LR w/ original desktop catalog.
5) Run "Import from Catalog" to import form the portable drive. -- NOTE I hadn't touched ANY photos on portable since step 3.
6) Import from catalog show 0 "new" photos but about 10 "changed" photos. Why?? It shouldn't show any.
7) Cancel step 6 and run Import from catalog again. This time it shows 0 new and 0 changed. (that's what I'd expect).
8) Cancel step 7 and run Import from Catalog again. This time it shows 0 new and about 30 changed - But they're a different set than in step 6.
9) Give up and post this question. What is changing the metadata?
As background, I'm running most current versions of OS X and LR 3. My library contains mostly DNG files with some jpg and some TIF and PSD. The "modified" files that are showing up all seem to be DNG files. The files in the library were shot with Canon, G2, G10, 10D, 20D, 60D and 7D. The "modified" files appear to be from the 20D, 60D and 7D (all files shot in last 6 months). The library has some virtual copies and stacks, but this doesn't appear associated with the "modified" files.
Thank you in advance.
Marshall

Ian;
Thank you for your response. I suspect you may be correct, although I can't trace the problem to explain lens profiles as the issue either at this point. Each time I try to "Import from Catalog" back and forth between two catalogs - both made from the same instance of LR, it shows a different set of photos with who's metadata is changed. I make absolutely NO changes to any photos. I just choose "Import form catalog," look at the list of photos it says are changed, select, 'cancel," and then select "Import form catalog" again. Each time it gives me a different set of, and total amount of changed photos. First its 9 photos, then 32 photos, then 447 photos, etc.
This has "BUG" written all over it. If it's actually a feature, I wish someone could show me how to control it.
A lot of people complain about LR's ability to share catalogs between computers and keep multiple catalogs in sync. If I could master "Import from Catalog," I'd feel I'd have a workable solution for managing multiple computers (with one photographer / editor).
Just my opinion on this one feature. Overall, I LOVE working with LR.
Thanks again,
Marshall
PS. Thank you, Ian for the many tips and tutorials you've provided over the past years. I've learned a lot from them.

Import From Catalog error

When I execute the Import From Catalog function, I am receiving an error messages something like "unexpected error, can not open catalog". This happend initially when it is doing the compare, building the preview prior to receiving the import option/preview screen.
Background;
(1) I had just completed several successful Import From Catalog functions from the same Catalog to the same Catalog
(2) I shut down and re-executed LR (I am using LR3)
(3) I tried the same Import From Catalog pointing to the back-up with the same results
Any ideas?

Becky,
I can not thank you enough... It worked ! The facebook additional function will be nice to try out as well.
You do not want to know the mess I got myself into but this will allow me to recover hundred of hours of processing adjustment metadata from the catalog that I used during the LR3 beta version. I just tried one folder with a significant number of photos and it worked.. Just a few more and I will have my adjustments and other metadata back !!!!

Anyone having issues with large Import from Catalog w/ LR 5.3?

I'm trying to consolidate into a single master LR catalog from several different machines, and keep having one of the three Import from Catalog operations I need to do fail.
I've had LR 5.3 fail to do a large (5000+) item Import from Catalog twice now - and fail in exactly the same place (after importing 2000 items) but with differences in the error output.
First time I got a message about the video items - fine, pulled those out of the export. DId so, started up again, failed after 2000 items again, but this time after clicking Cancel (with a half-stuck progress bar after running overnight) no error message was displayed.
Since I can't find Release Notes or a list of known issues (or where to open a defect report), I'm posting here. Anyone from Adobe out there?
MB

I think you must restore your iPhone without keeping backup! One suggestion: save your address book and your favourite apps with iCloud! And if you cannot do without, recover only this data.

Joomla website running from Azure very slow

I have migrated a Joomla website to windows Azure and it is running really slow (despite being a temp URL with only me connecting to it) compared to the previous hosting. The site is scaled up to standard with 2 CPUs and runs from a free cleardb
MySQL database (as created by the Azure Joomla wizard). I have tried everything (following guides on speeding up Joomla) to speed it up but nothing works. I am suspicious of the free cleardb database connection and raised a support question with them but they
were useless.
Is Microsoft's flagship Azure hosting really this bad? Has anyone else had problems with speed (particularly if connecting to a cleardb SQL database)?
My test URL is: http://rmjoomla.azurewebsites.net

Thanks Brenton,
That's interesting that it is responsive on the US. Apparently the website and database are hosted in Northern Europe (Dublin for Azure and not sure where database is exactly) and I am based in UK. I have checked it across different connections but
it just seems slow (sometimes 10s plus to load a page). The only thing I haven't tried is upgrading the database but since I am the only connection I am not convinced this will help.
There may be another option you need to check... Make sure the Website is AlwaysOn.. and Azure doesn't tear down the website due to inactivity.
https://social.msdn.microsoft.com/Forums/azure/en-US/5c822101-98ab-460d-94c9-d1ebb555d549/azure-website-very-slow-performance-nz?forum=windowsazurewebsitespreview
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

Lightroom 5.5 Import from Catalog *very* slow performance.

Similar Messages

Maybe you are looking for

Lightroom 5.5 Import from Catalog very slow performance.