Lightroom 5 and cc conflict

I have a previously installed version of lightroom 5 that I had installed prior to purchasing the creative cloud. This whole time I thought I was updating through cc but apparently I was not. Now I am trying to merge over to lr cc but don't know how because the previously installed LR 5 install is taking precedence and not allowing the cc to open. I am afraid to uninstall the 5 because I don't want to lose my catalog! Help!

If you already have LR5.3 installed with a perpetual licence, and download Lightroom via the CC app, it will install (the same) software over the top, (replacing the exising s/w) and the only difference is that when you go (in LR) to Help, Lightroom Registration, and click the Licence tab, you'll see a new licence number.
Note you can (legally) install LR on 2 machines with your existing perpetual licence and another 2 with your CC licence. The CC one will upgrade to LR6 free when that appears, whereas your existing licence stays at LR5.x unless you pay to upgrade when the time comes.

Similar Messages

Capture vs. Content Sharpening in Lightroom and ACR

Hi,
I have a question regarding sharpening in Lightroom and ACR. In the information I have read, many authors point out that Lightroom and ACR's detail panel is optimized to provide control over capture sharpening. In a post that I read recently by Jeff Schewe, he clarified that and said that we are really sharpening for both capture and content with the detail panel in Lightroom.
That is confusing to me because after reading Bruce Fraser's book on sharpening, capture and content sharpening were treated as two different processes. If I understood correctly capture sharpening for digital captures was based on the characteristics of the camera and the file size of the image, with larger megapixel files receiving a smaller radius. In addition, I read that the radius in content sharpening is dictated by the dominant characteristics of the subject matter being sharpened, with high frequency subject matter receiving a smaller radius and low frequency receiving a higher radius.
The reason I am confused is that it appears that capture and content sharpening for the same digital capture can at times be quite different. For example, I believe that the book suggests a radius for an 11 megapixel capture of .4. If the image content calls for a sharpening radius of 1.3, what do I do? In Lightroom/ACR I can only choose 1 radius.
In all the reading I have done regarding the proper use of Lightroom and ACR, it suggest that you should use a radius that is suited to the image content. So it appears that we are that we are being encouraged to perform content sharpening only with Lightroom and ACR. What happened to the "capture" sharpening portion of the process?
Since Lightroom and ACR are capable of recognizing the camera make and model as well as the file size, are they applying capture sharpening behind the scenes that is tailored to that specific camera and file. If not, then how are we achieving both capture and content sharpening in the same operation?
Sharpening for both capture and content in one pass would seem to conflict with some of the basic concepts elaborated on in Bruce Fraser's book. I am assuming that since Lightroom is using Photokit Sharpener routines, that they have accounted for the capture portion of the sharpening, but I don't see that stated explicitly anywhere in anything that I have read. If they have, I say kudos to everyone involved as that would be great. I'm just looking for a clearer understanding of what's happening.
If anyone can shed some light on this topic I would be very appreciative.
Thanks,
John Arnold

>Since Lightroom and ACR are capable of recognizing the camera make and model as well as the file size, are they applying capture sharpening behind the scenes that is tailored to that specific camera and file. If not, then how are we achieving both capture and content sharpening in the same operation?
The answer is that the detail section crosses over into creative territory and is not strictly "capture sharpening," although that is what is mostly meant to do.
Following the ultimate logic of the "sharpening workflow" might make you conclude that Capture sharpening and output sharpening are purely scientific steps where you should not make ANY creative decision at all and that creative decisions are only to be made in the creative sharpening step. In the real world, there are creative decisions and decisions determined by the content matter that enter into the capture step too just like in the output step. You might like extra-crunchy prints for example, but somebody else might prefer softer prints making you approach the output sharpening with a creative intent. The sharpening workflow was probably (Jeff will know more about the history) more of an attempt to arrive at a more rational way of approaching the process and to provide a guideline. It is probably not meant to rigidly separate the workflow up in defined steps where in the 1st step you're not allowed to think or look at the image, in the second step you can go completely wild, and in the last step you have to close your eyes again. The goal was probably to make the photographer realize that the different steps have a different purpose. Not to make you turn off your creative genius or to treat the process like a black box.
My approach to this, inspired in some part by Jeff's many posts on this, is to make the image look good at 1:1 using the detail tool in Lightroom/ACR. This is inherently driven by content of course as you use visual feedback. If your image is large swaths of plain color separated by sharp transitions with little structure, you probably do not want a high setting on the detail slider as you might induce halos and you probably want to use some masking. Conversely, if you shoot brick architecture, a high detail value might look good. If you shot at high ISO, you might need a different approach again to not blow up noise. Also, portraits might need a different approach. After the 1:1 optimization, I sometimes selectively sharpen (or blur!) parts of the image (rare but can be effective - example would be people's eyes). Then for the output step I use appropriate output sharpening for the medium according to my taste. You see that this is not rigidly following the workflow, but still is in the spirit.

When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing

When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing the metadata and stop it?

Thanks Sean,
I've had a look at the TC settings dialog and tried to keep it as simple as possible. I also had a copy of LR 4 on the hard drive so have trashed that also incase of any conflicts. LR seems to be running ok now but as said it's an intermittent problem.
I also have a copy of Capture One on the hard drive so am going to uninstall that also in case it is trying to launch.

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

Printing: Lightroom and Photoshop

Ok...so today I tried to run my first print since getting lightroom. Quick run down on my color management (although I am still learning on this subject as well). My monitor is calibrated with an eye one display. My camera (Canon 300D) is set to AdobeRGB profile. I am running an Epson 2400, Ilford Smooth Pearl paper, with the profile provided from Ilford, and have it set to have the printer determine colors. And I am running Lightroom and Photoshop CS2.
I have been printing with this combonation beautifully for about a year now. I do have one small thing about my setup, even calibrated, my monitor is a little dark, so I must do a small curves adjustment on my final version to get the print to be perfect. I have accepted this (not the newest or best monitor) and just set an action to run before printing.
So, today, I tried to print from Lightroom. The print came out WAY too dark...I mean, my blue sky is a dark purple...odd. So I said, well I need this print, let me move it to photoshop, drop the curve and print from there. Well...the blue came out blue, but the image is still a little dark...I will play with the curve again to see if I can get it right. I don't have a problem with doing this for now, but I am wondering why the images are darker then they used to be, even in photoshop.
Also, can I create actions in Lightroom, something like develop presets that I can run AFTER I am done working on an image that we prep the document for print?
Sorry for the long post...thanks for any help...

So...you're using the canned profile from Ilford...and in Lightroom you've added that via "Other" correct? When you select that profile you are then using Lightroom color management and then you go into the Epson driver under Properties, Mode Custom and then select Off under Color Management, right? You've also selected the correct media that Ilford reccomends with the Pearl paper?
If you hit print from there than that should take care of it. Note however that if you change the page template, it _WILL_ change the print output settings making you update to the profile again.
So far, I get equal output results from Lightroom and Photoshop CS2/3 when using the same profile and printing under Mac or Win. So, if you are _NOT_ getting the same results, your settings are not equal-something somewhere is set incorrectly.

I used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

I used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans

Problem with Lightroom and Epson Printer

I'm suddenly having problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5, and have an Epson Photo Stylus R2400. I've been using this combination from the beginning with no problems. Now suddenly when I try to print I get an error message that says Media is out or not loaded correctly. Neither is the case. I have tried restarting my computer, the printer and everything else I can think of, but nothing works. I can print from any other application without problems, so I'm assuming it's an issue with Lightroom.
Has anyone experienced anything similar? I was going to uninstall lightroom and do a reinstall but I can't find my installation disc. Now I'm at a loss to figure out what to do.
Thanks,
Craig

Try deleting you prefs file and/or print templates.
Lightroom is unique to many other programs in that it saves and restores printer settings. Some bad data may tried to be passes. A "fresh start" might help.

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
RJ@

Try to connect on Live chat one more time.
Still not connected , better to contact Adobe Phone Support
Click on Phone option and check once :
Contact Customer Care

I was in Lightroom and had a power surge and now Lightroom will not launch....what can I do to fix it?

I was in Lightroom and had a power surge and now Lightroom will not launch. It encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix the next time it launches. I have shut my system down and Lightroom still will not launch. Does anyone have any suggestions?

delete your preview cache (.lrdata folder).
Here has location:
Preference and other file locations in Lightroom 5
If not enough info, search this forum for "delete preview cache".
Rob

Can an iPhoto library be shared with Lightroom and capture one?

Since Aperture is being replaced by … nothing, how can I access the same library with multiple editors?

Neither iPhoto, Lightroom nor Capture One are editors. They are all database driven Photo Managers with non-destructive processing. There is no rational workflow that would use more than one of these apps, any more than it would make sense to write a novel in three different word processors at the same time.
Pick the one that suits your needs - if you're coming from Aperture then forget iPhoto, it's much less capable and also being end-of-lifed. Pick between Lightroom and Capture One. Then google the options for migration from Aperture to the one you choose.

Color change on exporting from lightroom and saving in Photoshop CS5

I have been having issues with my pictures with color management.    I have Lightroom 4 and Photoshop CS5. I thought over the last 2 years that it was just me.   I have bought a Eizo monitor with a hood, calibrate with a i1display pro, painted my walls gray, updated my strobes from alien bees to elinchrome bxri's.   Updated my sekonic meter to a L 758.   Have done custom white balance with gray card, expodisc, xrite kits.   The problem has been over the years when I work on a picture in lightroom and export it as jpeg or adobe rgb it gets saved to my external hardrive and the colors are really bad !!   You can go back and compare the picture in lightroom to the picture on my iomega external drive and there is a significant difference.   I do some animal photography and I had a dog that had brown fur and when I export it out of lightroom the dogs fur is actually a bright very orange color. Same thing happens with skin tones.     When I import the photos into lightroom the pictures look ok.       The same thing is happening when I go from lightroom to photoshop the picture color looks good but when I go to File-save as - tiff or jpeg the colors are changing.   It does not matter what color space I am in I have tried them all it is still happening.    If anyone has any insight that would be great.
Teresa

         Thanks everyone for the help.   I have only been doing photography for about 2 years and the color managment part has been my hardest thing to get right.   My monitor ColorEdge CG243W LCD.   Wide color gamut of 98%. Has a sensor on front of monitor that detects ambient brightness but this will only work if you are in a custom color mode. Modes are: custom, sRGB,DCI,EBU, Cal1.   I use the Cal 1 to be able to use the Colornavigator software that came with the monitor. You also have to be in custom color mode to be able to manually adjust brightness, contrast, temperature on the monitr itself which I do not use because I use the Cal 1 mode.   I was not sure about the digital input signals.   I am on the DVI-I in which this allows digital signal input and analog signal input.    There is a DVI-D mode that allows only digital input only.    Also did not know if I needed to be concerned about setting the frequency that corresponds to the grahic board in the monitor ?    My bandwith was set to normal and now is on wide.   My digital input is for 1920x1200 resolution.   Appicable signal is Vesa CVT RB. Frequency is 60 Hz.   Yes I did call Eizo twice last year when I got my monitor and did not get very far.     I have also called and spoke to a color specialist at my lab and told him the problems I have been having and he just told me to leave everything in sRGB.   Well I would like to get the most from my monitor's color gamut and when working on my pictures so that is why I am still determined to get this figured out.
I use the i1 Dislpay Pro hardware to calibrate with and the ColorNavigator software.     When calibrating.   I go to create a new target---select enter manually--Gamut ( monitor native--states recommended)--Brightness 100cd---White point (6500k)--set black level (recommemded states mininum 0.2)---gamma 2.20---priority (set automatically to standard, this adjusts gray balance while maintaining the contrast)---then I hit calibrate and it goes through the process.   The results I get are:                                            Target                                               Result
                      Brightness                                        100cd                                              99.9cd
                       Black Level                                    minimum                                       0.15cd
                      contrast ratio                                                                                            647:1
                      White Point                                    6500k                                              6501k
                       Gamma                                           2.20                                             R   0.6774,0.3136
                                                                                                                                        G   0.2031,0.6992
                                                                                                                                        B    0.1498,0.0499
Thanks again for your help I know this is alot of information but I thought it might help ?
Teresa

The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Question: The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Absolutely - but I had no idea there were two versions. When I got my new laptop I just went to the Adobe site to download and install LR5. It never asked if I had a license; it just directed me to install CC to start a trial which I thought I could license after downloading. Several sessions and many hours of looking through the forums and Google for an answer I never ran across anything that made this distinction. I still haven't found a path from www.adobe.com that would get me to the standalone download page (it's probably there, wasn't obvious to me) and looking at the download page it doesn't make any CC/standalone distinction.
There are many places I could have gotten a hint - for instance the license could be tagged "stand alone edition", the CC-version could recognize the stand-alone key and either accept it or produce a more meaningful error message, or the download site or the CC app could ask if I had previously purchased a key, etc.
It was my error to assume this was a deactivation problem, but it looked the same as a previous deactivation problem with Photoshop.
In any event, thank you for your help.

Lightroom and Flickr ID feature gap

I'm confounded by Lightroom and its plug-ins' lack of support for Flickr's photo-ID.
Flickr photo-ID is a unique 10, 11, or 12 digit number assigned to a photo when it is uploaded to their site.
The number is used in Flickr URLs and by 3rd parties like wikipedia and wikimedia http://www.flickr.com/photo_zoom.gne?id=233397357&size=o and Apple's Aperture Flickr ID meta data field. ( The id=233397357 is the Flickr photo Id number.)
Why is this useful? Just type that ID number into a Google search, don't include the word Flickr or ID, you will see that Flickr ID is referenced by at least ten different websites that Google searches! Wouldn't that ID be useful information to have in your Lightroom metadata?
The schemes used by Lightroom plugin developers seem to rely on things in the file names or metadata that can change, (creation date, upload date, filename) When contacted, the LR plugin developers say they can't do something that Apple and the Aperture plug-in developers have been doing for years. Admittedly, it's not an IPTC defined field, but we have plenty of custom fields to use.
The Flickr photo-ID doesn't change if you change filename, caption, add keywords or comments, sync metadata, or do any post processing (including cropping) - other than replacing the file from your desktop. Which seems to me to be safe so that, for example, a URL pointing to the picture above by the Wikipedia article, doesn't suddenly find a pornographic picture there.
Jay

Have you tried the third-party Export to Flickr plugin, which has many more features than the Flickr publish service built-in to LR? It provides the Flickr URL via the "At Flickr" metadata field, which you can access via LR's Metadata panel, with the metadata set All Plug-in Metadata. The URL contains the Flickr ID.

Lightroom and Windows 7

Is anyone running Windows 7 Beta + Lightroom and CS4?.
I normally run Vista Ultimate plus CS4 and Lightroom 2.2.
Having just loaded Lightroom onto Windows 7 all works ok apart from when I use the crop tool, when using the crop tool the image rotates 90deg. anyone else experiencing this problem.
Obviously not a major problem as I can just boot to Vista.

It is a known problem.
Here is a thread discussing the issue:
http://www.adobeforums.com/webx/.59b7ac15
If you have both the top menu (Library, Develop, etc) and the bottom thumbnails displayed at the same time, the crop tool acts funny. Close the thumbnails and it should work.
- Edward

I only bought Lightroom and Photoshop subscription but it appears the cloud overwrote all my other old programs and is now demanding a new serial

Hi,
I joined the subscription service but ONLY purchased Lightroom and Photoshop. I had other legally aquired adobe programs on my computer that I was perfectly happy with (dreamweaver - I olnly do the bare minimum of stuff with it, i write my own code mostly - therefore did not need an upgrade)...now it seems Adobe has taken it upon itself to update ALL of my programs to the newest versions and will not let me use any of my stuff until I pay for a new serial for ALL of it. I can't even read a PDF all of a sudden, because i magically have the newest version of Acrobat, which I NEVER asked for....
So they basically used my membership and HACKED my computer and updated software - I say hacked because these updates were without my permission...and now they are trying to force money out of me????? This should be ILLEGAL! this was a really really really crappy thing to do, since I DO NOT have the money to buy serials for all this other software. THANKS A LOT FOR SCREWING ME. would you please now HACK my computer again and fix this???? I should not be forced to update all my software if I DO NOT WANT TO!
If Adobe does not remedy this I will cancel everything and find other stuff to use. Too bad, because I prefer this software, but there is always another alternative...
FIX THIS!!!!!

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
or
Adobe contact information - http://helpx.adobe.com/contact.html may help

Lightroom 5 and cc conflict

Similar Messages

Maybe you are looking for