Lightroom 5 and Google Earth-Pro? How to make them work together in Lightroom???

Please help me: I have a Mac, Lightroom 5 and Google Earth-Pro. Is there any possibility to change the ****** Lightroom-Maps to Google Pro Maps???? Would be great. Thanks for answering in advance!

Thank you anyway!!
Let's wait for a cooperation of both of them!...... or at least for a little improvement of the Lightroom-Map

Similar Messages

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

I´m new at Garageband and Mainstage. How can I make them work together?

I´m new at Garageband and Mainstage. How can I make them work together?

You may want to download and read the manual for your phone. It may answer a lot of the basic questions.
http://support.apple.com/manuals/#iphone
There is an app on your phone called "Mail". Yes, it's for reading your email.
Best of luck.

I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

Mac App Store- Hiding and unhiding purchases

I have new printer Photosmart C410 and osx10.4.11. What do I need to do to make them work together?

I have new hp printer Photosmart C410a and Mac osx10.4.11. What do I need to do to make them work together?
My computer is:
Model Name:    iMac
Model Identifier:    iMac6,1
Processor Name:    Intel Core 2 Duo

Here is what you need to order:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
Hope you are backing up anyway, but be sure you have an up to date backup. Repair permissions in Disk Utility, then restart from the Snow Leopard disk you buy (in the above link) and do an upgrade (only changes the OS), not a clean install (which wipes all data). Others on here may chime in on their thoughts on how best to do this, but I've never had trouble over 20+ years doing it this way. If you aren't having crashes and strange problems now you should be fine. Please write back or start a new thread (you'll get more help than continuing in this thread which has printing problems in the header) that has something like "Need help upgrading from Tiger to Snow Leopard" that will attract more help.

Compatibility of Firefox 6 with Trend Micro titanium - how can I make them work together? My OS is Win XP (service pack 2 & 3)

Compatibility of Firefox 6 with Trend Micro titanium - how can I make them work together?
I have not downloaded FF6 yet because it is not compatible with my virus software - has this changed? If not, is there a simple "fix" or workaround?
Thanks.

Found the following on the TrendMicro forum:
*TrendMicro forum: http://community.trendmicro.com/
*Found fix in this thread: http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Firefox-6-amp-TM-Firefox-Extension-6-5-0-1234/td-p/43735 (posted by PartyJetsetGo, Customer Service Manager)
*[Hot Fix] B1306: http://esupport.trendmicro.com/solution/en-us/1059243.aspx
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Image capture won't recognize my ScanSnap iX500. How do I make them work together?

Image capture won't recognize my ScanSnap iX500. How do I make them work together?

To use Image Capture you need an ICA driver for your scanner. Checking the Fujitsu web site for drivers for the iX500 I only see a ScanSnap manager for OS X. No mention of an ICA driver. So you may need to contact your local Fujitsu support.

I have a new Bose sounddock with a lightning connector, but my iPod has the old style connector. Can I get an adapter to make them work together?

I have a new Bose sound dock with a lightning connector but my iPod has the old style connector
Can I get an adapter to make them work together?

Alternatively...
is this what you're after?
If so, have a look here: http://www.amazon.co.uk/Lightning-female-30-pin-Dock-Cable-Adapter/dp/B00DZN3GZK /ref=pd_sim_sbs_ce_1
or this one...
http://www.amazon.co.uk/SANDBERG-440-45-Adaptor-Lightning-Connector/dp/B009KZZ3L C/ref=sr_1_16?ie=UTF8&qid=1382801610&sr=8-16&keywords=30+pin+to+lightning+adapto r
Or google "lightning female to 30-pin dock male cable adaptor". The cruicial part is female lightning to male 30-pin ends.
The Apple cable is a female 30-pin to male lightning end.

Merge to HDR Pro - how to make it work?

The 'Automate -> Merge to HDR' feature worked fine during the first few weeks of my Ps CS5 trial but now doesn't work. Photoshop gets through the Merge to HDR Pro dialog but throws the attached error when returning to Ps.
If Merge to HDR Pro is chosen on DNG images from Lightroom 2.7 or Bridge CS5, Photoshop again gets through the Merge to HDR Pro dialog but when creating the HDR image and returning to Ps seems to throw it away with no resulting error. Photoshop just stares blankly with no image open.
I experienced the same error with CS4 and was excited when the Merge to HDR Pro feature on my CS5 trial worked fine, yet with 5 days left in the trial the HDR feature now refuses to cooperate. It previously was working OK from the Automate menu, from Lr 2.7, and from Bridge. What exactly I did to upset Photohop is a mystery.
I've tried resetting preferences and removing all plugins and extenstions to no avail. Any ideas on how to make Merge to HDR Pro functional?

There has been a long and continuous thread regarding CS5 having problems when one tries to save images that have been combined in Merge to HDR Pro. I have exactly the same problem. I have been shooting 3 images bracketed -1, 0, +1 or -2, 0, +2. When I select 3 images in Bridge. Go to Tools>Ph otoshop>Merge to HDR Pro the computer does its work and produces an image of a combination of the 3. I can see the image, and in the Layers Panel I see 3 Layers plus one Layer that is entitled Merge to HDR Pro(layer is devoid of image. When I try to Save As Photoshop freezes up. I have 11 Screenshots to illustrate. Also Select 3 in BridgeI have tried many different sets of images. Screenshots:Select 3 images in Bridge CS5Go to Tools>Photoshop>Merge to HDR ProSave as 32 bit image; have tried 16 bit and 8 bit too- still freezes at endSave as BEF 32 bitSaving -Computer is Processing32 bit image saved on screenSave as bef to proper locationPutting in File TitleSelecting 1PHOTOSHOP FROZEN- anything I click on no responsePhotoshop Running but not responding- Frozen; Task Manager says all running here, but no responseHave to end process with task manager. Thanks, Sam

How to make photoshop work concurrently with Lightroom?

Usually I start adjusting in lightroom and then do hard edits in photoshop. When I work with Tiff files in Lightroom its great because I dont have to save my changes as I work on a batch of photos. When I open one of my tiffs from lightroom into photoshop is there a way for the edits that i make in photoshop to be applied to that file in lightroom without saving the file again in photoshop?

josh phoenix wrote:
is there a way for the edits that i make in photoshop to be applied to that file in lightroom without saving the file again in photoshop?
No

I have greyed out songs on my ipod and i dont know how to make them come back on my ipod and it wont work from my itunes library to my ipod

I need to know how to make greyed out some songs turn bold. I have tried from my itunes library to my ipod but it still wont work. Can anyone help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Thinkpad Yoga and UP710E stylus, how do you make them work together?

So my work just got me a Thinkpad Yoga as per my request
I have confirmed that in the Device Manager I do see: "HID-compliant touch screen"
I have also gone out on my own and purchased the UP710E wacom stylus, as suggested at various points on this board and on other sites, as something that should work with the Yoga
I've also purchased Manga Studios as an art program that is supported on this device (it seems to run fine) and with the pen.
I turned on Manga Studios (and MSPaint for good measure), pressed pen to screen and... nothing. Eraser to screen.. nothing. Mouse? Works fine. Stylus that everything and everyone indicated should work? Nope.
So.... what am I missing? Is there a driver I should be looking at? Everything should be up to date.. some in-between program I need to install? Try this when the wind is blowing south by southwest?
Help please?
Solved!
Go to Solution.

Thanks.
Here's how the support site describes your MTM:
i5-4300U(2.9GHz), 4GB RAM, 500GB 5400rpm HD, 12.5in 1366x768 LCD, Intel HD Graphics,
Wireless Option, Bluetooth, UltraNav, Secure Chip, 8c Li-Poly, Win8.1 Pro 64
I'll defer to others who might know definitively, but it's my understanding that the 1366x768 LCDs are not Wacom digitizer-equipped, whereas the FHD panels are. That would be one possibility for what you're seeing.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Hint captions - how to make them work

Hello all,
Can someone shed light how to make hint captions work? I created a training progect with all default options - it generates all four caption: Text, success, failure and hint.
The problem is that hint captions are not shown when hoovering over the clickbox area... in fact they never show up whatever i do.
Am I missing something obvious here?
Thanks!

OK. Thanks.
Now do one more thing: Select the click box object that you can see in this example and from the Modify menu item, click Arrange > Bring to Front. Then republish and test.
This is a bit of a long shot, but what I'd checking for here is that there is a known issue in Cp 5x where sometimes an object is shown as being at the top level layer in the timeline when in fact it may be several layers deep. So your click box might actually be underneath another object and thereby NOT seeing the mouseover to trigger the Hint caption.

Path branching game, choices, how to make them work?

Basically, I want to make a simple frame by frame path branching game. The problem is that I know that writing in and filling in EVERY FRAME going all along for EVERY CHOICE PATH would be an insanely tedious amount of work.
My basic project is reminiscent of japanese visual novels, and I've been looking for turtorials to help me with this style of role playing games, but all of the tutorials concentrated on the adventure RPGs. :\
Being a novice at Actionscript, past working buttons to make it go to the next frame and stopping it, I was wondering if its possible to make a choice you make earlier in the game affect it later. Such as, you keep following the game normally afterwards, but depending on your choice you'll go to a different scene later.
basically, this way I'd like to eliminate the need to make two duplicate paths with only minor variances to show the changes for some choices.
Another thing that I would like to know if its possible to do, though this is less important, as I have yet to look for these things and I'm sure I can find them but.... a save/load system, easy to find I'm sure. And an unlocking system. Something so that once they hit a certain CG I can unlock it in a 'memories' menu on a main screen.
I know my questions seem to be rare, but does anyone know how to accomplish this and can explain it in a way that even an actionscript noob like me can understand?

I see. Thanks for the advice. My only problem is that depending on what i can do, I may need to write the script differently. All I need to be able to do is say, a person clicks a button that changes their frame to this one part of the story, then it returns to the normal story you see no matter what, is that later on, when it hits a certain point the flash can tell which choice he made and depending on that choice, display a different scene.
Possibly even depending on a number of choices. I dont know actionscript or anything, but the simplest way i can think to do this would be if it were possible to make a value, then have it change depending on the choice a person makes. Only... As far as I can tell, i cant find such a function on CS3. An example may be... A value names 'Player Choice 1' Then have it so that when the player gets to chat choice and picks an option, the number for the option is set as the value. Such as...
If player chooses 1, the value is set to one.
Obviously this would mean the button for the first option would need the script to also change this value, provided such a value can be made. I've looked at a lot of beginners tutorials and nothing tells me even the beginnings of how I can make this. :/ I just need a point in the right direction.

Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

The MacBook Pro is running at least 10.7.

Lightroom 5 and Google Earth-Pro? How to make them work together in Lightroom???

Similar Messages

Maybe you are looking for