Lightroom 5 Application Error

I have installed; fixed; uninstalled and reinstalled Lightroom 5 student version several times. Then I uninstalled it, deleted all files, and downloaded and installed the trial version. The downloads and installs seem to go fine with no errors, but every time I try to open the program, I get a box titled "lightroom.exe - Application Error" with the description "The application was unable to start correctly (0xc 0000 07b). Click OK to close the application." I'm running Windows 7 Home Premium with Service Pack 1. I've rebooted my computer several times and tried closing all other programs. I always get the same error. I have CS5 installed on this computer and it runs fine.

Since your response is neither an answer nor a question, I'm assuming you want more information. I don't know how much you need. This is the System Summary of the System Information screen:
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
ALLISON-PC
System Manufacturer
Dell Inc.
System Model
Inspiron N5010
System Type
x64-based PC
Processor
Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, 2261 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A04, 5/10/2010
SMBIOS Version
2.6
Windows Directory
C:\windows
System Directory
C:\windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
Allison-PC\Allison
Time Zone
Eastern Daylight Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.80 GB
Available Physical Memory
1.73 GB
Total Virtual Memory
7.60 GB
Available Virtual Memory
5.22 GB
Page File Space
3.80 GB
Page File
C:\pagefile.sys
What exactly am I looking for in the event files?

Similar Messages

Error Code "Lightroom.exe Application Error"

Lightroom 4 crashes when opening. Error Code "Lightroom.exe Application Error"
Running Windows 7 64
Is there an easy fix.

[discussion moved to Adobe Reader forum]

Lightroom open application error with cache

I purchased Lightroom and recently updated to 5.6 64 bit and when I attempt to open the application I get an error screen that says "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches." And nothing fixes itself when I try to open it again. I have updated it to the newest version thinking that may help and so far nothing is helping. Suggestions?

IIf you look in the folder where your catalog is located, next to the .lrcat file, you'll find a folder with the same name ending in .lrdata.
Delete the folder, and LR will rebuild it when you restart it.
THe .lrdata folder contains the preview cache, and it can be rebuilt any time. Note that on a Mac this looks like a special file, but the process is the same. Trash it and let LR rebuild the previews.
mh++

Can't open Lightroom. Keep getting application error - unable to start correctly (0xc000007b).

Keep getting application error - unable to start correctly (0xc000007b). Have uninstalled and reinstalled twice with no change.

...07b Problems http://forums.adobe.com/thread/1355374?tstart=0

Dreamweaver.exe - Application error. The application was unable to start correctly (0x000007b) Click to close application.

I am trying to launch Dreamweaver CC and keep getting application error.

Please follow the steps mentioned in document : http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

Lightroom encountered an error when reading it's preview cache

I been getting this error for over 2-3 months and thought it would go away with the new version releases, i tried all the standard fixes,deleting the catalog,compacting etc. even moving it to new folder, reinstalled the software twice. The whole nine yards. IMHO, there's a problem with the software, it may be uique with differetent type of machine setup or a corrupt file in the in the catalog and the compacting doesn't fix it.
The error always happens while in the develope and crashed, has to leave the software (sometimes it just hangs the software and you have to kill the task manually). You have at least 10-15 seconds before going back in, otherwise it will still crash, a thread is still occuring from the orginal crash and still completing it's task. That's the error, annoying as heck.
My only hoping is a new version of LR comes out soon (4.0) and it goes away, otherwise, I'm going to find something else-- driving me crazy, I spend about 10-15% of my time each week getting out and back in to make go away, then can go for a day(s) sometimes and no problems. I tried recreating the problem on specific photos where I think it might be corrupt, that doesn't give any clue, there is no pattern to this at all, it happens randomly on new photos and old photos, yet i can go back to those photos again and no problems.
Any NEW ideas would be appreciated (no compact, no new catalogs, new installs, turn off various options cache preview etc. move to new folder and more.....done that etc.).

The error is exactly what's it in the title of the post, Lightroom encountered an error when reading from its preview cache and needs to quit. That's it.
I don't know what else to tell you, i wish I had more. This is all over the internet, I followed pretty much all the solutions, delete the catalog or delete the preview folders (tried both). Tinker with the cachee preferences.   Most people kill the preview folders and the catlog gets recreated and there problem is resovled, doesn't work for me.
No cloning, totally two different catalogs (not networked etc.) a good question though.
When I am refering to catalog and cache, I strictly talking about LR only, nothing outside of that or in the operating system, just LR files only, here they are:
I have a   LR catalog folder called--->   C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
you have another folder called: LR_Catalog Previews.lrdata   (with many subfolders underneath at)
and I have LR catalog filein C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
LR_Catalog.LRCAT
That's it, a file and a folder with many sub-folders. I'll get a screen print with error next, but it's basically what I said earlier in the beginning, you can be in develope or even the library, and error occurs in a message box, you hit ok and the application exits. On average it can happen 6-7 times with an hour and sometimes not at all, working with same the photos. Sometimes it can happen within mintues, sometimes not at all for over 2 hours. There is no specific pattern to it.

Hello, good morning ! I have the creative cloud photography ( photoshop lightroom + ) and suddenly my Lightroom is giving error asking serial . Where I find my serial ? Help me!

Hello, good morning! I have the creative cloud photography (photoshop + lightroom) anda suddenly my Lightroom is giving error asking serial. Where I find my serial? Help me!!!

Hi Morana,
Adobe Creative cloud applications do not have any serial numbers. They are activated through your adobe id.
Please refer to the help document to fix this issue:
Creative Cloud applications ask for serial number
Regards,
Sheena

'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.

I am attempting to render the following .jnlp in MS IE:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
   codebase="http://localhost/LottoMadness/"
   href="LottoMadness.jnlp">
   <information>
     <title>LottoMadness Application</title>
     <vendor>Rogers Cadenhead</vendor>
     <homepage href="http://localhost/LottoMadness/"/>
     <icon href="lottobigicon.gif"/>
   </information>
   <resources>
     <j2se version="1.5"/>
     <jar href="LottoMadness.jar"/>
   </resources>
   <application-desc main-class="LottoMadness"/>
</jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
(The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)

AndrewThompson64 wrote:
I am not used to seeing references to a local server that do not include a port number.
E.G. http://localhost:8080/LottoMadness/
I have deployed the following HTML (HelpMe.html) to the web server:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Untitled</title>
</head>
<body>
Help Me!
</body>
</html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
>
As an aside, what happens if (your MS IIS is running and) you click a direct link to..
[http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
When I click this link I get the error and exception I cited in my previous post.

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

Application Error while activating the feature - for creating list content type, list definition and list instance

Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>

<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathya

redeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya

Receive an Application Error (The memory could not be "read") when opening

After I install Itunes the program works ok until I close it and try to reopen. When I do this I receive an Application Error that says:
The instruction at "0x6686f183" referenced memory at "0x0fccc094". The memory could not be "read".
Click OK to terminate the program
Click CANCEL to debug the program
Debugging does not work so the only solution is to uninstall Itunes and then reinstall. That again only works for one use of the program. As soon as I close it and re-open, I get the same error. Please HELP. I cannot waste any more time uninstalling and reinstalling.
Sony Windows XP

Try this: Turn off automatic Microsoft/Windows updates and reboot your computer. I saw this a couple of weeks ago on the forum.

The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)

Hi,
I get this error randomly when i run my VB 6.0 application which calls Photoshop CS2 actions. I went through many forums, but could not manage to get the right solution for this.
"The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
OS: WIndows Server 2003 SP2
Photoshop CS2
ANy help on this will be highly appreciated.
Thanks in advance,
Smiley

I see this sort of error notice in Bridge and Photoshop, preceded by the message " Photoshop (or Bridge) has encountered a problem and must close. Tell MS.
Yes or No."
It most frequently happens in PS when running Dfine 2.0. I have no clue what triggers the Bridge closure. It happens randomly.
CS3, so nobody gives a tinkers dam, I suppose.
I see this kind of message in software testing on a regular basis. Of course, when the test is under way, the software is generating a detailed log file which we package up as part of a bug report. Then at the bug scrubs, lively discussions ensue as to who has to fix what!
I can only image what would happen if the Dfine people and the PS people had to sit through one of those!

**SOLUTION** DLLML.exe Fails to load at startup (application error)

Hello everyone!
I purchased the SB X-Fi Fatalty Champion Edition soon after release, and think this is the best card I have ever used to date. Absolutely love it, unbelievable sound.
Now a year or two ago I noticed a certain file failing to load when I started windows.
This file, DLLML.exe. To my understanding this file is used to load EAX emulation support into older games/modules (essential loads a "middle-man" file between the game's sound files/.dll's, and the hardware SPU [Sound Processing Unit, not a real acronym, but that's what I call it since GPU and CPU are similar distincti've acronyms so if you see it used anywhere, it came from me ] to allow EAX support in non-EAX enabled games), and/or to add EAX effects in your audio files using the Wave Studio app.
I've pinpointed this issue to either a Windows Update, or the Creative auto-update (which could mean it is an error caused by an installaion combination of multiple apps at once) because this issue did not arise until I did these two things (did Windows Update, then Creative Auto-Update, then restarted computer).
Now I've primarily had this issue with Windows XP x64 but I have had this issue at times with Windows XP x86 as well.
After you install the software suite, it adds an entry in your Windows Startup to load the module (Start/Run. msconfig. Startup tab. Look for STARTUP ITEM: DLLML). The entry looks like this:
WinXPx86 looks like: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
WinXPx64 looks like: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
Under most circumstances this module loads fine, but because Creative, for reasons why I have not delved into, loads some of their DLL files differently than the Windows standard, which may also be a cause of this issue (extremely unlikely, I believe it is one of the 2 things i mentioned above).
Either way, after I did those 2 things, the DLLML.exe startup entry failed to load every time.
But I fixed it.
Now what you have to do to resolve this issue, involves editing the startup entry in the Windows Registry.
If you are scared to go into it, have no idea what I am talking about, or never edited the Registry before, don't worry. If you follow these steps EXACTLY, you have nothing to fear.
I will be using default installation parameters for file pathing, so if your Operating System is installed in a different dri've letter other than C:\, then just change the letter to the one your OS is installed onto.
Capitals used for emphesis on actions to take:
-Hit the START button, then select RUN
--------If RUN is not in your start menu, you need to enable it by right-clicking and open area of your TASKBAR, select PROPERTIES. --------Click the START MENU tab, then the CUSTOMIZE button. Click the ADVANCED tab. In the START MENU ITEMS box, scroll down to the entry that says SHOW RUN. Check the checkbox to fill it. Then OK/APPLY/OK, and you should be back to the desktop. Then go to START/RUN
-type the word REGEDIT
--------This opens the Windows Registry.
--------DO NOT change ANYTHING in this other than the exact directions I specify or you may corrupt your registry or even worse, corrupt your system, which means F&R time (Format & Reinstall). Treat it like a stripper. You can look all you want but don't touch or there could be dire consequences.
--------Now the fastest way to find this is to manually navigate to the specific "key" or "entry" you need to modify. Mouse-click the +'s to navitage further into the "hi've" following these maps:
-FOR WINDOWS XP x86 USERS NAVIGATE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
-FOR WINDOWS XP x64 USERS NAVITAGE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Microsoft\Wind ows\CurrentVersion\Run
--------Now you are looking for a specific entry NAME called RCSYSTEM. Depending on which version you are running. They are:
-FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
-FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
-------Now we are going to edit the entry. What we need to do is get rid of that * (asterix) character in the name. I don't know why it is there, I'm thinking it may be a coding error. But in my WinXPx64, this was the culprit.
-Double-click the RCSYSTEM key to edit it, and edit it so it looks EXACTLY LIKE THIS (If you're paranoid about doing something bad, COPY and PASTE this line pertaining to your installed OS. KEEP IN MIND THE INSTALLATION DRIVE LETTER, CHANGE FIRST LETTER IF NESCESSARY)
-FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
-FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
-click OK button. Now it is changed.
-------And we're DONE EDITING the Registry entry!
-now go to FILE in the top-left menu, then select EXIT
-RESTART your computer
-------You should not receive the "DLLML.exe failed to load" (application error) again!!
To check to see if it loaded into your system properly (as if not getting the error message anymore was proof enough it loaded properly), when you reboot back to the desktop, do the "three-fingered salute" (ctrl-alt-delete), then select the PROCESSES tab. Click on the IMAGE NAME heading to sort it alphabetically, and look for the name (WinXPx86) DLLML.exe or (WinXPx64) DLLML.exe *32.
If you see it listed, it loaded!! CONGRATS, IT BE FIXED!!
If this did not work for you, then your system is posessed, get a priest. I don't think a witchdoctor would give your comp good vibes O_o
Hope this resolved it for you. Enjoy your EAX with Duke Nukem 3d again!
EDIT: As a side note, I also noticed that since after this fix, my computer doesn't hang after sending the restart/shutdown killsignal, so I am wondering with people having similar hanging issues, if their issue could be resolved something similar to this.
Just a thought for any admins/mods/users out there that know what they are doing that maybe wanna test that out.
Sincerely,
Jason Ostapyk
3yr degree, MCP, CCNA, A+ certified, Specialised Electrician Class M Licensed

G Kudos for a brilliant finding! After a Windows Hotfix on my XP SP3, when shutting down my PC I would wait for a program and then get an error that EAX was not responding before finally shutting down. On next reboot I lost sound on my PC. After running tests, the Direct Sound test failed pointing at EAX.
This solution cured the problem. Again, kudos, job really well done!!!

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Application error happening at least twice a day. Faulting applicaiton name: wmiprvse.exe

We're experiencing an issue with one of our Windows Server 2008R2 Standard Edition SP1 servers where an Application error occurs at least twice, and sometimes up to 5 or 6 times per day. The following error is what we see. Any help would be greatly
appreciated, and I'll be checking back frequently to check for updates and provide more info whenever needed. Thanks!
General:
Faulting application name: wmiprvse.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d42
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1bbc
Faulting application start time: 0x01cd5d65dbeb2e7c
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-09T08:34:39.000000000Z
EventRecordID
6812
Channel
Application
Computer
{FQDN}
Security
EventData
wmiprvse.exe
6.1.7601.17514
4ce79d42
ntdll.dll
6.1.7601.17514
4ce7c8f9
c0000374
00000000000c40f2
1bbc
01cd5d65dbeb2e7c
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\SYSTEM32\ntdll.dll
ebe1621c-c9a0-11e1-a1d4-5cf3fce8cef6
ETA: I also ran the wmidiag.exe tool from Microsoft. I saw it as a suggestion on another forum and ran it. I don't know if it has any bearing here, but this is the log in case it's helpful
show
06604 14:51:25 (0) ** WMIDiag v2.1 started on Tuesday, July 10, 2012 at 14:40.
06605 14:51:25 (0) **
06606 14:51:25 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
06607 14:51:25 (0) **
06608 14:51:25 (0) ** This script is not supported under any Microsoft standard support program or service.
06609 14:51:25 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
06610 14:51:25 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
06611 14:51:25 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
06612 14:51:25 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
06613 14:51:25 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
06614 14:51:25 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
06615 14:51:25 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
06616 14:51:25 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
06617 14:51:25 (0) ** of the possibility of such damages.
06618 14:51:25 (0) **
06619 14:51:25 (0) **
06620 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06621 14:51:25 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
06622 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06623 14:51:25 (0) **
06624 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06625 14:51:25 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User {Username} on computer {ComputerName}.
06626 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06627 14:51:25 (0) ** Environment: ........................................................................................................ OK.
06628 14:51:25 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
06629 14:51:25 (0) ** Drive type: ......................................................................................................... SCSI (IBM ServeRAID M5015 SCSI Disk Device).
06630 14:51:25 (0) ** There are no missing WMI system files: .............................................................................. OK.
06631 14:51:25 (0) ** There are no missing WMI repository files: .......................................................................... OK.
06632 14:51:25 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
06633 14:51:25 (0) ** AFTER running WMIDiag:
06634 14:51:25 (0) ** The WMI repository has a size of: ................................................................................... 90 MB.
06635 14:51:25 (0) ** - Disk free space on 'C:': .......................................................................................... 75295 MB.
06636 14:51:25 (0) ** - INDEX.BTR, 15818752 bytes, 7/10/2012 2:38:58 PM
06637 14:51:25 (0) ** - MAPPING1.MAP, 242388 bytes, 7/10/2012 2:33:33 PM
06638 14:51:25 (0) ** - MAPPING2.MAP, 242388 bytes, 7/10/2012 2:38:58 PM
06639 14:51:25 (0) ** - OBJECTS.DATA, 77570048 bytes, 7/10/2012 2:38:58 PM
06640 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06641 14:51:25 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
06642 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06643 14:51:25 (0) ** DCOM Status: ........................................................................................................ OK.
06644 14:51:25 (0) ** WMI registry setup: ................................................................................................. OK.
06645 14:51:25 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
06646 14:51:25 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
06647 14:51:25 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
06648 14:51:25 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
06649 14:51:25 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
06650 14:51:25 (0) ** this can prevent the service/application to work as expected.
06651 14:51:25 (0) **
06652 14:51:25 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
06653 14:51:25 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
06654 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06655 14:51:25 (0) ** WMI service DCOM setup: ............................................................................................. OK.
06656 14:51:25 (0) ** WMI components DCOM registrations: .................................................................................. OK.
06657 14:51:25 (0) ** WMI ProgID registrations: ........................................................................................... OK.
06658 14:51:25 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
06659 14:51:25 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
06660 14:51:25 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
06661 14:51:25 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 18 WARNING(S)!
06662 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_NIC_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{28A5F598-F699-4A6B-B9F9-8C7EB9B7359F}:QLogic_NIC_Provider
06663 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_FCHBA_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0AE588DD-D2E9-41EB-BCD1-8BF474187EC5}:QLogic_FCHBA_Provider
06664 14:51:25 (0) ** - ROOT/IBMSD, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06665 14:51:25 (0) ** - ROOT/IBMSD, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06666 14:51:25 (0) ** - ROOT/IBMSD, EndpointRegistrationProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{BF833E81-33AA-40ED-B74A-329F006DB4F8}:EndpointRegistrationProviderModule
06667 14:51:25 (0) ** - ROOT/CIMV2, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06668 14:51:25 (0) ** - ROOT/ADPT, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06669 14:51:25 (0) ** - ROOT/PG_INTEROP, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06670 14:51:25 (0) ** - ROOT/PG_INTEROP, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06671 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06672 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06673 14:51:25 (0) ** - ROOT/IBMSE, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06674 14:51:25 (0) ** - ROOT/IBMSE, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06675 14:51:25 (0) ** - ROOT/IBMSE, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06676 14:51:25 (0) ** - ROOT/LSI_MR_1_3_0, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06677 14:51:25 (0) ** - ROOT/EMULEX, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06678 14:51:25 (0) ** - ROOT/EMULEX, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06679 14:51:25 (0) ** - ROOT/BROCADE, brcdprovider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{48898EFD-0F9A-4657-B03D-FF400A7D2CDE}:brcdprovider_Module
06680 14:51:25 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
06681 14:51:25 (0) ** This can be due to:
06682 14:51:25 (0) ** - the de-installation of the software.
06683 14:51:25 (0) ** - the deletion of some files.
06684 14:51:25 (0) ** => If the software has been de-installed intentionally, then this information must be
06685 14:51:25 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
06686 14:51:25 (0) ** the provider registration data.
06687 14:51:25 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\BROCADE path __Win32Provider Where Name='brcdprovider_Module' DELETE'
06688 14:51:25 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
06689 14:51:25 (0) ** You can retrieve the missing file from:
06690 14:51:25 (0) ** - A backup.
06691 14:51:25 (0) ** - The Windows CD.
06692 14:51:25 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
06693 14:51:25 (0) ** - The original CD or software package installing this WMI provider.
06694 14:51:25 (0) **
06695 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06696 14:51:25 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
06697 14:51:25 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
06698 14:51:25 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
06699 14:51:25 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
06700 14:51:25 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
06701 14:51:25 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
06702 14:51:25 (0) **
06703 14:51:25 (0) ** Overall DCOM security status: ....................................................................................... OK.
06704 14:51:25 (0) ** Overall WMI security status: ........................................................................................ OK.
06705 14:51:25 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
06706 14:51:25 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 2.
06707 14:51:25 (0) ** - ROOT/SUBSCRIPTION, CommandLineEventConsumer.Name="BVTConsumer".
06708 14:51:25 (0) ** 'SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99'
06709 14:51:25 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
06710 14:51:25 (0) ** 'select * from MSFT_SCMEventLogEvent'
06711 14:51:25 (0) **
06712 14:51:25 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
06713 14:51:25 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
06714 14:51:25 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
06715 14:51:25 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
06716 14:51:25 (0) ** - ROOT/SERVICEMODEL.
06717 14:51:25 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
06718 14:51:25 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
06719 14:51:25 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
06720 14:51:25 (0) ** i.e. 'WMIC.EXE /NODE:"{ComputerName}" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
06721 14:51:25 (0) **
06722 14:51:25 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
06723 14:51:25 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
06724 14:51:25 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 30 ERROR(S)!
06725 14:51:25 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06726 14:51:25 (0) ** MOF Registration: ''
06727 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06728 14:51:25 (0) ** MOF Registration: ''
06729 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06730 14:51:25 (0) ** MOF Registration: ''
06731 14:51:25 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06732 14:51:25 (0) ** MOF Registration: ''
06733 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06734 14:51:25 (0) ** MOF Registration: ''
06735 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06736 14:51:25 (0) ** MOF Registration: ''
06737 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06738 14:51:25 (0) ** MOF Registration: ''
06739 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06740 14:51:25 (0) ** MOF Registration: ''
06741 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06742 14:51:25 (0) ** MOF Registration: ''
06743 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06744 14:51:25 (0) ** MOF Registration: ''
06745 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06746 14:51:25 (0) ** MOF Registration: ''
06747 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06748 14:51:25 (0) ** MOF Registration: ''
06749 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06750 14:51:25 (0) ** MOF Registration: ''
06751 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06752 14:51:25 (0) ** MOF Registration: ''
06753 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06754 14:51:25 (0) ** MOF Registration: ''
06755 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06756 14:51:25 (0) ** MOF Registration: ''
06757 14:51:25 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06758 14:51:25 (0) ** MOF Registration: ''
06759 14:51:25 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06760 14:51:25 (0) ** MOF Registration: ''
06761 14:51:25 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06762 14:51:25 (0) ** MOF Registration: ''
06763 14:51:25 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06764 14:51:25 (0) ** MOF Registration: ''
06765 14:51:25 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06766 14:51:25 (0) ** MOF Registration: ''
06767 14:51:25 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06768 14:51:25 (0) ** MOF Registration: ''
06769 14:51:25 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06770 14:51:25 (0) ** MOF Registration: ''
06771 14:51:25 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06772 14:51:25 (0) ** MOF Registration: ''
06773 14:51:25 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06774 14:51:25 (0) ** MOF Registration: ''
06775 14:51:25 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06776 14:51:25 (0) ** MOF Registration: ''
06777 14:51:25 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06778 14:51:25 (0) ** MOF Registration: ''
06779 14:51:25 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06780 14:51:25 (0) ** MOF Registration: ''
06781 14:51:25 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06782 14:51:25 (0) ** MOF Registration: ''
06783 14:51:25 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06784 14:51:25 (0) ** MOF Registration: ''
06785 14:51:25 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
06786 14:51:25 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
06787 14:51:25 (0) ** You can refresh the WMI class provider buffer with the following command:
06788 14:51:25 (0) **
06789 14:51:25 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
06790 14:51:25 (0) **
06791 14:51:25 (0) ** WMI MOF representations: ............................................................................................ OK.
06792 14:51:25 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
06793 14:51:25 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
06794 14:51:25 (2) !! WARNING: WMI EXECQUERY operation errors reported: ................................................................... 2 WARNING(S)!
06795 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_PointingDevice WHERE Status = "OK"' did not return any instance while AT LEAST 1 instance is expected.
06796 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_Keyboard' did not return any instance while AT LEAST 1 instance is expected.
06797 14:51:25 (0) **
06798 14:51:25 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
06799 14:51:25 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06800 14:51:25 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06801 14:51:25 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
06802 14:51:25 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06803 14:51:25 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06804 14:51:25 (0) **
06805 14:51:25 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
06806 14:51:25 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
06807 14:51:25 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
06808 14:51:25 (0) ** WMI static instances retrieved: ..................................................................................... 2072.
06809 14:51:25 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
06810 14:51:25 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
06811 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06812 14:51:25 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
06813 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06814 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06815 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06816 14:51:25 (0) **
06817 14:51:25 (0) ** # of additional Event Log events AFTER WMIDiag execution:
06818 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06819 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06820 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06821 14:51:25 (0) **
06822 14:51:25 (0) ** 30 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
06823 14:51:25 (0) ** => This error is typically a WMI error. This WMI error is due to:
06824 14:51:25 (0) ** - a missing WMI class definition or object.
06825 14:51:25 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
06826 14:51:25 (0) ** You can correct the missing class definitions by:
06827 14:51:25 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
06828 14:51:25 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
06829 14:51:25 (0) ** (This list can be built on a similar and working WMI Windows installation)
06830 14:51:25 (0) ** The following command line must be used:
06831 14:51:25 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
06832 14:51:25 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
06833 14:51:25 (0) ** with WMI by starting the ADAP process.
06834 14:51:25 (0) ** - a WMI repository corruption.
06835 14:51:25 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
06836 14:51:25 (0) ** to validate the WMI repository operations.
06837 14:51:25 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
06838 14:51:25 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
06839 14:51:25 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
06840 14:51:25 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
06841 14:51:25 (0) ** the WMI repository must be reconstructed.
06842 14:51:25 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
06843 14:51:25 (0) ** otherwise some applications may fail after the reconstruction.
06844 14:51:25 (0) ** This can be achieved with the following command:
06845 14:51:25 (0) ** i.e. 'WMIDiag ShowMOFErrors'
06846 14:51:25 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
06847 14:51:25 (0) ** ALL fixes previously mentioned.
06848 14:51:25 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
06849 14:51:25 (0) **
06850 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06851 14:51:25 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
06852 14:51:25 (0) ** INFO: Unexpected registry key value:
06853 14:51:25 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
06854 14:51:25 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
06855 14:51:25 (0) ** From the command line, the registry configuration can be corrected with the following command:
06856 14:51:25 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
06857 14:51:25 (0) **
06858 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06859 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06860 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06861 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06862 14:51:25 (0) **
06863 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06864 14:51:25 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
06865 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06866 14:51:25 (0) **
06867 14:51:25 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\{Username}\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_{ComputerName}_2012.07.10_14.40.25.LOG' for details.
06868 14:51:25 (0) **
06869 14:51:25 (0) ** WMIDiag v2.1 ended on Tuesday, July 10, 2012 at 14:51 (W:103 E:51 S:1).

Following might help
A Wmiprvse.exe process crashes in Windows Server 2008 R2 when you use the WMI interface to query the hardware status on a computer that supports the IPMI standard
http://support.microsoft.com/kb/2280777
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
I saw this in my googling. Listed as the cause on the hotfix page is the following: "This
problem occurs because the Ipmiprv.dll module leads the Wmiprvse.exe process to crash. This behavior depends on certain hardware sensor types when the sensor is enumerated." The
faulting module for that hotfix is ipmiprv.dll, and our faulting module is ntdll.dll. I'm thinking that this hotfix isn't applicable, but I'm open to hearing why I'm incorrect if I am.
Seth Johnson

Lightroom 5 Application Error

Similar Messages

Maybe you are looking for