Lightroom 5 doesn't show GPS info from canon 6D

Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8! Strange...

I think I was having the same issue - after all I found out that when importing photos via Lightroom, I was overwriting the GPS information by "updating" the metadata by using the preset I used to use for my scanned film photographs.
Check the following:
When importing, on the right hand side you see "Apply During Import"
If you have the "Metadata" section "None" then this is not the solution for you. But if you have something else, make sure that you go into "Edit Presets" then UNCHECK "GPS" section of it.
Hope this helps.

Similar Messages

Aperture doesn't show video imported from Canon 5D Mk 3

When I'm importing video to Aperture 3 from Canon 5D Mk 3, the files show up in Aperture with black screen. Sound is OK and the duration is unchanged but there's no image. In Finder, Quicktime and for example After Effects the video shows up normally so I can convert it to other formats, but that way it's more complicated than it should be.
Also, when using Compressor to convert the files the end result is the same. Haven't tried to import the videos to Final Cut Pro X yet... Has this happened to anyone else and what can I do to fix this? I tried to import a file to my girlfriend's Aperture 3 and it worked normally there.

Thanks, but can you elaborate as I'm new to both video and FCE. What are the item property of the clips versus in the sequence, can you advise me what settings to use, how can I find these properties? any info will help
Cheers

Is it possible to display GPS info from a COOLPIX S800c in Aperture 3?

Is it possible to display GPS info from a COOLPIX S800c in Aperture 3?

To see the GPS locations display the image in "Places view", while connected to the internet (you will see the images locations as pins on a map).
To see the numerical values edit the "EXIF info" metadata preset in the Info panel to include GPS:
Or simple us the Lift&Stamp tool to lift the tags from your image:
It will show the GPS value, if the image has tags. This tool can also be used to transfer the GPS tags to other images without GPS.
Regards
Léonie

How can i run Lightroom 3.6 with RAW files from Canon 650D?

How can i run Lightroom 3.6 with RAW files from Canon 650D?

Download the newest DNG converter from Adobe, convert your RAW photos to DNG, and then Import into Lightroom.

I installed CS6 and now Lightroom doesn't show CS5 as an Edit option

I installed CS6 and now Lightroom doesn't show CS5 as an Edit option. CS5 is still installed on my computer. How can I add it to Lightroom Edit options?
Mac 10.6.8

You can add CS5 as an "Additional External Editor" on the External Editing Tab of the Preferences panel. See this screenshot, I have Photoshop CS5 as my prime editor, and have added CS3 as an additional external editor:
Then when you use "Edit In...." you'll see both options available..

All of my images are not showing to upload from Canon 5D to my MacBook Pro

This is driving me absolutely insane.... I uploaded 250 photos from my Canon 5D but I was having issues with them so I deleted them from my Mac and from Lightroom as well. I went to upload them back onto my Mac and it's showing a different amount of photos each time I try to connect the camera. It has shown 80, then 120 and sometimes it shows 25... I have no idea why Lightroom doesn't want to show all of the pics on my Canon 5D to import... PLEASE help.. one solution I'm thinking of is to connect my external HD to my wife's laptop with Windows XP and import them onto the external hard drive then connect the HD to my Mac and import them that way.. any ideas, thoughts suggestion or solutions would be greatly appreciated.. this seems so elementary to be happening with two such high caliber technologies.. Mac and Adobe.. please HELP!

A link to your test page is all you need to post. We can see your code with our browser toolbars.
Not found on server:
http://www.cprpro.com/www/images/Index_02.jpg
http://www.cprpro.com/www/images/online_course.jpg
But they are here:
Here they are:
http://www.cprpro.com/images/online_course.jpg
http://www.cprpro.com/images/Index_02.jpg
Take away the /www and it should work
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Copy GPS infos from exif to xmp

Hello,
I would like to copy the gps coordinates from pictures from the exif data to the xmp data to read the information in indesign cs5. How does this could work?
I was sent to this forum, this is the original thread:
http://forums.adobe.com/thread/873022?tstart=0
Thanks for help
Thomas

Thanks for the example, but it I wonder if Picassa is using it's own format?
This is the information that is in the exif data..
GPS Version = 2.2.0.0
GPS Time Stamp = 12:59:57
GPS Date Stamp = 2010:02:25
Image Width = 1024
Image Height = 683
EXIF tag 258 = 8 8 8
EXIF tag 262 = RGB
Make = Canon
Model = Canon EOS 40D
EXIF tag 277 = 3
X Resolution = 72.0
Y Resolution = 72.0
Resolution Unit = Inches
Software = Picasa 3.0
Date Time = 2010:02:25 15:59:57
Artist = thomas Wießner
yCbCr Positioning = Cosited
Exposure Time = 1/320 sec
F-Stop = f/11
Exposure Program = Normal program
ISO Speed Ratings = 400
EXIF tag 34858 = IFD Segment, ID = 34858
ExifVersion = 0221
Date Time Original = 2010:02:25 15:59:57
Date Time Digitized = 2010:02:25 15:59:57
Shutter Speed = 1/320 sec
Aperture Value = f/11
Exposure Bias Value = 0.00
Max Aperture Value = f/3.5
Subject Distance = 1.1 m
Metering Mode = Pattern
Flash = 16
Focal Length = 18.0 mm
EXIF tag 37520 = 00
EXIF tag 37521 = 00
EXIF tag 37522 = 00
FlashPix Version = 0100
Color Space = sRGB
Pixel X Dimension = 1024
Pixel Y Dimension = 683
Focal Plane X Resolution = 4438.356
Focal Plane Y Resolution = 4445.969
Focal Plane Resolution Unit = Inches
Custom Rendered = Normal Process
Exposure Mode = Auto
White Balance = Manual
Scene Capture Type = Standard
Image Unique ID = 49e5de27a4eacc78664f825224c07059
As you can see the GPS data isn't there only date, time and version, does it use Image Unique ID?
I downloded Picassa and Google Earth, the details didn't show in Picassa and nothing came up in Google Earth when trying to view it from Picassa.
Have I missed anything? as I don't use Picassa or Google Earth normally?
Edit: I have also had a look at all the metadata using Exiftool and no further GPS data is available.

Firefox doesn't show jpg files from a web page while other browsers do

I have created a page and uploaded www.nutechequipments.com/equipment.html page doesn't show the jpg files in only firefox everywhere including Dubai. But all the other browsers show the uploaded jpg pictures in perfect manner. In Firefox only the table is loaded with placeholders. It is not a problem with my computer. It is the problem all over the world.
the sample html code is given below:
<pre><nowiki><td><img src="equip\equip.jpg" size width="110" height="90"></td><td><img src="equip\equip1.jpg" size width="110" height="90"></td><td><img src="equip\equip (2).jpg" size width="110" height="90"></td><td><img src="equip\equip (3).jpg" size width="110" height="90"></td></nowiki></pre>

You have backslashes (\: escaped as %5C as seen in Tools > Page Info > Media) in the scr attribute of the images and that doesn't work in Firefox.
You need to change the backslashes to forward slashes
<pre><nowiki>equip%5Cequip.jpg
equip%5Cequip1.jpg
equip%5Cequip%20(2).jpg
equip%5Cequip%20(3).jpg
equip%5Cequip%20(4).jpg
equip%5Cequip%20(5).jpg
equip%5Cequip%20(6).jpg
equip%5Cequip%20(7).jpg
equip%5Cequip%20(8).jpg
equip%5Cequip%20(9).jpg
equip%5Cequip%20(10).jpg
equip%5Cequip%20(11).jpg
equip%5Cequip%20(12).jpg
equip%5Cequip%20(13).jpg
equip%5Cequip%20(14).jpg
equip%5Cequip%20(15).jpg
equip%5Cequip%20(16).jpg
equip%5Cequip%20(17).jpg
equip%5Cequip%20(18).jpg
equip%5Cequip%20(19).jpg
equip%5Cequip%20(20).jpg
equip%5Cequip%20(21).jpg
equip%5Cequip%20(22).jpg
equip%5Cequip%20(23).jpg
equip%5Cequip%20(24).jpg
equip%5Cequip%20(25).jpg
equip%5Cequip%20(26).jpg
equip%5Cequip%20(27).jpg
equip%5Cequip%20(28).jpg
equip%5Cequip%20(29).jpg
equip%5Cequip%20(30).jpg
equip%5Cequip%20(31).jpg</nowiki></pre>

Task manager on windows server 2008 doesn't show the memory from newly installed 2nd CPU

Hi,
We have a dual processor dell power edge t410 running windows server 2008 (64-bit), standard edition. I have recently added a 2nd xeon x5560 quad-core processor (first one is also x5560 with 32GB (4x8) memory) and 16GB ram (4x4). Seems like the new CPU is
recognized in BIOS, Dell's server admin app and task manager shows 16 vertical boxes (hyper threading is on both cpus) under Performance->CPU Usage History and these boxes show processor load spread relatively evenly across all threads. On the other hand
the additional memory for this CPU is visible in the BIOS, Dell server admin but not in the task manager, which still shows the 32gb under performance->physical memory. Rammap also shows only 32GB.. Currently running proprietary processes that along with
the metafile and windows own ring up nearly 30GB, which in turn causes system latency for GUI and apps, as if the additional 16GB are not there...
So the questions are these:
1) does anybody know why the added memory doesn't show up in the task manager / rammap?
2) if the new memory doesn't show up, does this mean that Windows does not use it (which should be impossible if the CPU is utilized, unless I am wrong about windows using the cpu..)?
Thank you,
- Kiril

Thanks for the reply Ravikumar,
Unfortunately this solution is inapplicable to my version of the OS as it is 64-bit and not 32-bit. Do you have any other ideas?
Best,
- Kiril
Yes, PAE((Physical Address Extension) is supported only on 32-bit versions of the
Windows, operating system 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see
64-bit System Design. The Address Windowing Extension (AWE) API is supported on 32-bit systems. It is also supported on x64 systems for both native and Wow64 applications.
Useful link for Address Windowing Extensions is:http://msdn.microsoft.com/en-us/library/windows/desktop/aa366527(v=vs.85).aspx
If the above info does not help you, please contact dell as suggested by
Shaon Shan.
Regards, Ravikumar P

IPhoto app doesn't show any photos from my photos app

I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty. When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could. Is this a known iOs6 bug?

Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

Trace file doesn't show any info about error

Dear all,
DB : 10.2.0.4
Solaris 5.10
We have a background program to do some activities in the Database.
Today ,when running the program we got the below error :
1) 20221: errexit, ORA-00001: unique constraint (MEDS.MED_USER_EQUS_HIST_PK) violated.
I ran a trace of this session and the trace file doesnt have any info about the error..ran trace using the below command :
exec sys.DBMS_SUPPORT.START_TRACE_IN_SESSION(2166,30629, false,TRUE);
why is that the trace file doesn't have any info about the error.
2) I disable the constraint disable novalidate.
even then I got the same error .. why is the constraint getting validate even if I disable the constraint ?
Please guide
Kai

As usual this question has documented answers, and you are asking this question, because you consistently refuse to read any documentation. So in your case the answer could have been 'Yes, there is. See the docs'.
You could actually say you are in gross violation of the forums etiquette post, and are abusing this forum.
If you would have read the docs, you wouldn't have used dbms_support (which was never supported for end-users), but you would have looked at
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_monitor.htm#i1003679
and what do you see?
The life of a DBA can be so easy when he makes an attempt to find information himself!
He doesn't have to wait until some kind soul answers doc question 779!
Sybrand Bakker
Senior Oracle DBA

System Tray Program doesn't show a form from the menu

public SysTrayApp()
ContextMenu TrayMenu = new ContextMenu();
TrayMenu.MenuItems.Add("Exit", OnExit);
TrayMenu.MenuItems.Add("Send Mail", SendMail);
TrayMenu.MenuItems.Add("Add Exception", AddException);
TrayIcon.Icon = new Icon(SystemIcons.Application, 40, 40);
TrayIcon.Text = "RJC Server Services";
TrayIcon.ContextMenu = TrayMenu;
TrayIcon.Visible = true;
NewTimer = new System.Timers.Timer(5 * 60 * 1000);
NewTimer.Elapsed += NewTimer_Elapsed;
NewTimer.Start();
void AddException(Object sender, EventArgs e)
ExceptionList ExceptionForm = new ExceptionList();
ExceptionForm.ShowDialog();
This is the code I am trying to use to show a instance of the Exception form. My application is a system tray application, when right clicked it shows menu items, however clicking the add exception menu item doesn't show the form? I have also tried ExceptionForm.Show()
to no avail. Any ideas?

figured it out: ExceptionForm.Visible = true;
Also I had a long running process on form load that took a while to execute before the form was shown.

After Update from 5 to CC my Lightroom doesn't import the raws of Canon 5d mark III. All imported images are broken. What can i do?

Hi,
after the Update the import of CR2-Files doesn't worg correct.
What can i do?
Best regards.
Jürgen

You could check the settings for your monitor profile or use a system setting for sRGB. See if this link helps:
How do I change my monitor profile to check whether it’s corrupted? - The Lightroom Queen

Desc doesn't show datetime columns from SQl Server

Hi Everyone,
I have working db link to sql server using hsodbc:
Oracle 10.2 on AIX using freetds odbc driver version 0.82.
I can access tables on sql server but oracle sees only varchars and numerics columns in a table.
Is there a way to select datetime columns from sql server using hsodbc?

when hsodbc does not show a certain data type it is commonly related to the fact that HSODBC doesn't support the related ODBC data type.
In general you have a data type in your SQL Server which is mapped to an ODBC data type by the ODBC driver. HSODBC then maps the ODBC data type to an Oracle equivalent and when the ODBC data type isn't supported by HSODBC it just drops it from the select list.
So for a root cause analysis an ODBC trace is required to determine the mapping of the FreeTDS ODBC driver.
With this info we can then compare the mapping documented in the HSODBC manual and if the ODBC data type isn't listed as a supported data type you then need to cast the data type on the source side to a different data type (for example varchar/char).
So please post the ODBC trace and I'll have a look.
- Klaus
Edited by: kgronau on Apr 2, 2013 12:50 PM
BTW, here the link to the HSODBC docu:
http://docs.oracle.com/cd/B19306_01/server.102/b14232.pdf
Oracle® Database
Heterogeneous Connectivity Administrator's Guide
10g Release 2 (10.2)
B14232-01
B.1 Mapping ANSI Data Types to Oracle Data Types Through an ODBC
Interface

Lightroom doesn't show Histogram, Exit Properly, or load previews

I've installed both Lightroom CC and Lightroom 6 on multiple machines. I'm experiencing the following difficulties with both.
1. When I exit from Lightroom CC or Lightroom 6 (Yosemite 10.10.3), the program appears to exit, but doesn't actually close. I have to use either the activity manager or CTRL-ALT-ESC to "Force Quit".
2. While in Lightroom CC, histograms do not appear in the histogram box either in the library or develop module.
3. On many images, the preview will not load in a reasonable length of time (5 minutes).
My hardwares are: 1) a Trash Can Mac Pro (2014) with 32 GB RAM, 6 cores, 3.5 GHz per core, and the 1 TB flash drive (0.7 TB free).
2) 2011 (Late) Mac Pro, 3.4 GHz Quad Core, 32 GB RAM, 2 TB Hard drive (1.8 TB free).
I've tried uninstalling, followed by reinstalling both programs, I've redownloaded the Lightroom 6 and Lightroom CC programs directly from Adobe. I've rebooted my machines. I've signed out of the CC and signed back in.
Right now I'm mostly frustrated by the inability to use the program for anything function.
Any suggestions.

Thanks Victoria, here you go.
SSD is my root volume (most people would have "Macintosh HD" instead), so that is where /Users/… resides: so for example my home folder is at /Users/dave which is the same as /Volumes/SSD/Users/dave. You can see that saving from PS has made LR think I have image folders at /Users/… when I do not, and never have. You can see below "SSD" is the volume "Users" where the real image folders live (an external Firewire drive in this case).
I have expanded "Show Parent" to the root of each volume in that screenshot.
So under SSD, "/Users/Lightroom Photos 2/…" is bogus and under Users "Lightroom Photos 2" is legitimate.

Lightroom 5 doesn't show GPS info from canon 6D

Similar Messages

Maybe you are looking for