Lightroom 5 Final, Big bug with Function "Light Dim"

Hello,
Found this bug in many Pcs (With Win 7) in x64 Bits AND x32
When i use the option "Lights Dim" (in Menu "Lights Out") when i quit Lightroom 5, lr 5 Crashes after the ending.
Receive windows message "Lightroom 5 Has Chrashing ...etc..."
I search to understand, and i think have know.
Before the V5, no crash (V4.4. for exemple), and with this versions, "Lights Dim" function is intergrate into "lightroom.exe"
With the Lr5 Version ONLY "Lights Dim" is extrenal ans is used by "Slideshow.Dll"
For verify this, very easy, just move "Slideshow.Dll" in you desktop, and you see the "Lights Dim" not run.
After always testing, you see also the Option "Light Off" runs always good, and "Light On" same.
This in one little piece of this 3 function is external, it's very dirty, and crashes.
Pse (developpers) note this bug and in 5.1, integrate this 3 functions into Lightroom5.Exe
Best regards, and sorry for my very bad English

I am having the same issue and wondered what was the issue. Thank you for posting; now I remember Lightroom didn't start doing this until I updated to Mac OS Maverick. The only time I don't have that problem is when I physically disconnect my secondary display from my computer.

Similar Messages

Big bug with the screen of my Nokia c6-00

Hello i have a big problem with my phone
I can't explain that so i did a video .
This bug often persist ...
Sometimes i can't use my phone for 1 days ! Its horrible
It's not the original screen i replaced a new screen but i verified it and it been correctly placed
The bug -> http://www.youtube.com/watch?v=hdDMcHJFSFU&feature=youtu.be
I'm sorry for my bad english

Send your phone to Nokia care it looks like a hardware problem from your recorded video

Lightroom 5.3 bug with export images

Hi,
I can't export single images in Lightroom anymore. When I choose an image including the watermark the system exports all the latest imported images, but not a single one. Can anyone help me with that?
-jo

in your lr5.2, click help>updates...
bug fixes:
Issues when upgrading catalog from previous versions of Lightroom.
Incorrect photos are displayed after switching away from a Publish Collection.
Catalog optimization did not finish, and was not optimizing the catalog
Feather of clone spots is set to 0 after upgrading catalog to Lightroom 5.
Auto White Balance settings are not saved to Snapshots.
Sony 18-55mm lens is detected as the Hasselblad 18-55mm lens for lens correction.
Increased Update Spot Removal history steps when in Before and After view.
Slideshows start playing automatically even when the Manual Slideshow option is enabled.
Video playback stops when dragging on the scrubber.
Errors when publishing photos to Flickr through the Publish Service.
Option + drag on Edit Pin behavior is functioning incorrectly.
Black border appears around the exported slideshow video.
Catalog containing images processed with PV2003 were adding a post-crop vignette when catalog upgraded to Lightroom 5.
Pressing the “Reset” button while holding down the Shift key caused Lightroom to exit abruptly.
Output Sharpening and Noise Reduction were not applied to exported images that were resized to less than 1/3 of the original image size.
The Esc key did not exit the slideshow after right clicking screen with mouse during slideshow playing.
Import dialog remained blank for folders that contain PNG files with XMP sidecars.
Metadata panel displayed incorrect information after modifying published photo. Please note that this only occurred when metadata was changed after the photo was published.

LIGHTROOM CC 2015 Bug with Intuos

LIGHTROOM CC 2015
Mac Pro mi-2010 and Macbook Pro mi-2010 - Yosemite 10.3.3
When you put an overlay, it is possible to change the settings with apple mouse or trackpad, using command key. It’s impossible to change this with Wacom Intuos 4 or Intros Pro (driver 6.3.11-3). all was OK in Lightroom 5.7.1
Other bug : Pentax 20-40 exif don’t be displayed even when the correct profil is selected.
Please, share this with developers. Thanks

Well what do you know ... this might just be a combination of buggy coding on both Adobe's and Wacom's parts.
One of the problem areas in LR CC or 6.0.1 is as said curves adjustments ... erratic behaviour and unresponsive pen action from using the Pro M tablet made me roll back various drivers, each time clearing the preferences etc. Until I found out that using the latest 6.3.11-3 driver and turning Touch input ON it actually is as instant and smooth action as you'd wish for, if you pick an adjustment point and then two-finger-click-drag.
Furthermore the general laggy and unresponsive feeling of sliders, and in particular using scrubby sliders, is gone if you choose to use touch input. Place the cursor over the desired slider or value and two-finger-click-drag or respectively three-finger-drag.
Even scrolling in grid view using touch input works as well! We just can't use the pens for now in Adobe LR CC.
Please note that in general I've been very satisfied with Wacom tablets and their performance for more than seven years. This is somewhat of a hickup that has been intruduced since OS X Yosemite in combination with newer Adobe applications. None the less it is utterly important to solve these bugs as it makes work frustrating.
Best,
Henrik

Bug with function "resume 0x****" of jdb

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
      public static void main(String[] args){
           Room r = new Room();
           decrease de = new decrease(r);
           increase in = new increase(r);
           de.start();
           in.start();
class Room {
     private volatile int degre=20;
     public void more(){
        degre += 4;
     public void less(){
       degre -= 3;
class decrease extends Thread{
   private Room room;
   public decrease(Room r){
             room =r;
   public void run(){
    try{
     while (!interrupted()){
                room.less();
      catch(InterruptedException e) {}
class increase extends Thread{
   private Room room;
   public increase(Room r){
        room =r;
   public void run(){
        try{
             while (!interrupted()){
                  room.more();
       catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Looks like a memory clearing problem in the function. Best to post this problem in an OSS message, or look through the OSS notes to see if the problem has been identified before.
Michael.

WARNING: BIG bug with new Ovi on phone!!

Few days ago I gat the message there was a new version (version 2.08.042 I believe) for Ovi on my C6-01 phone. Download and instalation were okay. But I did found out that once you download something through Ovi store on my phone, the GPRS connection is not closed!?
As far as I know there was no other dataload then my download but battery was drained very quick cause of that constant connection.
So if you use Ovi on phone and did download something, make sure you check if the connection is closed or close the connection yourself. At least, that is what I have to do on my C6-01.

Ok, contacted the UK Nokia Care (there seems not the be a Dutch contact page). Have to say, they are surprisingly fast with reacting: got 2 reactions within 24 hours
On the downside, they do not read. Think they only scan for keywords cause the first reaction was the advise to turn off applications to prolong battery life. I reacted back again explaining and then the reaction was the advise to turn the phone GPRS setting "Packet data connection" to "When needed" (to which it was already set and has nothing to do with Ove Store bug). Reacted back again so see what happens now

Lightroom 4: Massive BUG with White Balance / Quick Develop. Totally Unreliable!

I just recently updated from LR3 and just now found a massive bug concerning the white balance adjustments in the quick develop module.
After a studio shooting and especially after weddings I use the "make warmer" adjustment in the quick develop panel to give all (a few thousand NEFs) a nicer look all at once.
The great thing about this is - like all quick developments - that it increases the color temperature relative to each image's starting white balance.
Yesterday I wanted to edit my first wedding in LR4 and like in LR3 applied one click "make warmer" to all images at once (previously WB was "as shot").
While I browsed through the images to rate them I noticed some of them were very "pinkish".
After closer inspection it came out that a lot of images (50%-60%) had the following custom WB set: 5316, Tint: +10.
It is always this exact combination no matter what the "as shot" WB was.
That setting of course applies way too much magenta to a lot of images.
After resetting the WB of single images to "as shot" and selecting "make warmer" once again the images look fine and get appropriate WB values.
But every time I select more than one image to apply "make warmer" a lot of them get the strange value of 5316 and +10.
Sometimes it's even just the first few images of the selection that get correct values and all the following ones get the off value. It appears to be totally random.
I tried completely resetting all images prior to "make warmer", setting them to different camera profiles first and even switched them to Process 2010 again. But absolutely no luck! :-(
The "make warmer" tool gives me totally unusable results.
I find it strange, that I couldn't find anything about that on the net.
PLEASE fix this ASAP.
To apply WB to thousands of images individually is a real pain.
I would be glad to support you fixing the issue.
My setup:
Nikon D700
Nikon D300s
(Both cameras affected, I only shoot NEF)
Win7 x64
LR4.1 as well as LR4.2 RC

@ssprengel
I get your point but that is exactly my problem.
Not only is there no pattern but also once I reset a file that got 5316+10 to "as shot" and select "make warmer" for it again it does get the correct value! As long as I select it as a single file without others.
So just to simplify my findings and explain what I have been doing all night:
- SELECT 5 files in Library View (all freshly imported, no settings altered, WB "as shot")
File 1: 5700 / -8
File 2: 5500 / -8
File 3: 5550 / -8
File 4: 5450 / -6
File 5: 5500 / -7
- CLICK "make warmer" once
Result:
File 1: 6089 / -8
File 2: 5867 / -8
File 3: 5316 / +10
File 4: 5316 / +10
File 5: 5316 / +10
1 and 2 are okay!
- SELECT 3-5
- RESET THEM
Result:
File 3: 5550 / -8
File 4: 5450 / -6
File 5: 5500 / -7
- CLICK "make warmer" again
Result:
File 3: 5316 / +10
File 4: 5812 / -6
File 5: 5867 / -7
File 4 and 5 are okay!
- SELECT File 3 again
- RESET IT
- CLICK "make warmer"
Result:
File 3: 5923 / -8
now File 3 is okay, too.
It is completely random!
But that is no way to work, of course.
I have two weddings from last week and am going nuts already.

BlueTooth bug with car

Since the 4.3 update there's a big bug with the bluetooth connection with the car system - it still exists after a factory reset:
I paired the phone and the car. But every time they connect, I get a message box if I want to grant access to my phone's messages. Even the "Allow always" option does not work and I get asked every time. Very annoying!!

Hello, I'm having the same issue after updating my Xperia SP to Android 4.3 (12.1.A.0.266). In my car (Mercedes Benz A-Class from 2013) there is a radio called "Audio 20 CD" built in. Every time when I want to get into my car, my smartphone wants a connection request for my messages (SMS).The option "Always Allow" does not work. The phone does not remember the next time. I tried several times a new pairing of phone and car radio and I cleared the cache of the bluetooth-share app and smart connect app, but this didn't solve the problem. Is there a fix available? With kind regardsThorsten

Lightroom 5.2 and Mavericks Lights out bug with dual monitors

I installed OS X Mavericks on my iMac which has a second NEC display connected and that I use as my main display. When I activate "lights out/lights dim" pressing "L" on the keyboard my primary display (NEC) doesn't change at all but the secondary display (iMac) is the one that dims the lights on the interface. Makes no difference if I have the secondary display active as a second screen for Lightroom or not. Lights out/dimm dosen't work on my main interface display.
Anyone seeing this as well with their second display?

I am having the same issue and wondered what was the issue. Thank you for posting; now I remember Lightroom didn't start doing this until I updated to Mac OS Maverick. The only time I don't have that problem is when I physically disconnect my secondary display from my computer.

Blocking bug with 10.8.3+Adobe Lightroom+Canon iPF5000 (but workaround found)

Hi all,
since I have updated my MacBook Pro (early 2011 model) with 10.8.3, I have a blocking bug with Adobe Lightroom (either 4.3 or 4.4) for launching prints on my Canon iPF5000 (firmware 1.33, either MacOS driver 2.67 or 3.06, connection through USB).
When I was under 10.8.2 with the Canon's driver 3.06, everything works fine.
Basically, after clicking Print a Copy or Print... in Lightroom, the file spooled to the driver stays in MacOS printer queue. Within the printer queue window, the printer is in pause mode, and each time I try to resume the printing processing, the driver put it on hold immediately. When I look into the history on the Console, the driver complains about an unknown error... The data stay within the driver, as my Canon iPF5000 "Data" led indicator stays unlit.
My print settings are 600dpi or 300dpi, print sharpening Standard/Glossy, 16 bit output. And Color managed by printer (because I let the Canon driver managing my B&W prints).
Strangely enough, when I launch a print from Preview application, the drivers does its job and sends it successfully to my Canon iPF5000...
As this was driving me crazy, I have tried a clean install of MacOS 10.8.3 (as 10.8.2 is no more available from Apple servers...). No success, same blocking issue.
Eventually, I've found the workaround: using the imagePROGRAF Advanced Preview. You have to click on "Print..." in Lightroom in order to see the driver settings window, and then check the "Preview before printing" option in the main tab of the driver settings. Then I can preview my Lightroom printing work and then launch successfully my printing.
Simple workaround, but very strange bug...
For me, the root cause could be multiple and not very obvious.
Is it Mac OS 10.8.3 ? But why can I make prints from Preview application for instance, and not from LR ?
Is it the Canon driver ? But this lead me to the same question.
Is it Lightroom ? Does it send corrupted data that make the driver crazy but not the imagePROGRAF Advanced Preview ?
So, if any user of Canon iPF5000 + Mac OS 10.8 + Lightroom is around, please share your experience.
And if any Apple, Adobe or Canon engineer read this, please try to fix this.
Happy printing,
Amaury

It's different how applications write print data. If you use Advanced Preview from the driver then it calculates already the output which afterwards is only sent to the printer.
Have you once tried to print with fast graphic process switched off (option of advanced settings)?
Hope it helps
Renate

Bug with min function applied to an attribute?

Does anyone know if there is a bug with the minimum function when it is applied to an attribute?
I have Accounts, Date, Sales Type and volume in my request.
I have applied min(Date) in the fx of the Date column.
My query is hitting the YAGO table even though non of the columns i am using is mapped onto a YAGO table.
As a test I've removed the min function frem the Date column and applied it to the Account column.
Again my query hits the YAGO table.
Does anyone know if it is a bug or can someone propose a workaround?
I am using OBIEE version 10.1.3.4.1090414.1922 on Windows XP.

Hi,
You can create a separate report and refer it into the column of main report by 'Filter based on results of another request'
This should resolve
Hope this helps
Regards
MuRam

Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

You could just disable updates. Change these settings in about:config.
* app.update.auto - set to false
* app.update.enabled - set to false
You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
* http://sjc.mozilla.com/en-US/firefox/new/

"Edit with" Function is not lighting up

My "Edit with" Function is not lighting up when I right click the image I placed on indesign. I want to edit the photo in Photoshop but I am not given the edit with preference from which I can choose to edit the photo on InDesign through photoshop. Can anyone out there have an answer for me. Thanks so much for your time. Cerulleansky

How did you get the image into Indesign? If you copy/paste it it won't show the "Edit with" option. You'll have to go to the original image to edit it.

Big trouble with Nokia X3-02 alarm snooze function

Hello Nokia programators,
I have any big problem with alarm snooze function in my new NOKIA X3 02 mobile.
Please read this situation:
On my old mobile Nokia Classic: I sleep, sleep. Is 5:30, alarm ring, ring. Whith
closed my eyes i touch to one big buttons on my locked mobile. Alarm paused,
and after 10 minutes ring, ring, ring. Is super, i do not oversleep.
In my NEW !!! Nokia X3 02: I sleep. Alarm ring. Whith closed my eyes touch to
display or any key. ALARM TOTAL OFF and i oversleep to my work. For snooze alarm
to 10 minutes i must open eyes, touch to one small button, write unlock key, send
unlock key and set snooze alarm on left corner my display. Oh my god !!!! This is
NEW mobile with NEW operation system for users ???? Please modify this function.
I must use my old NOKIA for this problem. X3 02 is fine mobile for users standard
mobile. This function is very bad and total degradate this mobile for me.
Please add users option for snooze touch to display or any keys to new firmware.
Very thanks

I've had the same problem ,and the only remedy (for me ) is to always set the date On 02/05/2011 and then set up the alarm on Am/pm setup
Only then the alarm works ,even on the next day i.e. 03/05/2011 the alarm doesn't work and show me message like "168 hours remaining" ,you always need to set it up to 02/05/2011 (Well i don't exactly know if that date will work for you ...but surely the soluution is to set it the a date it will work ...try many dates

Bug with big Black Pixel on Photoshop CC

Hi,
I recently install Photoshop CC (iMac 2,8 Ghz Intel Core i5, 16Go 1333 Mhz DDR33, Mavericks)
When using different layers, I have a HUGE BLACK PIXEL coming on the picture (365x365px) , often on the low lef corner.
It disapears when I strongly zoom inside but it comes back when I zoom out...
Any idea please ????

Many thx Mylenium,
it seems to be working right now without OpenCL... I also had a bug with zoom in and zoom out but it seems to be ok too...
I hope it will continue..
(I use to work on heavy pictures with many layers, hope everything will not be too slow without OpenCL)

Lightroom 5 Final, Big bug with Function "Light Dim"

Similar Messages

Maybe you are looking for