Lightroom 5 importing raw files

I cannot import raw files from my Nikon D7100.  There is a plug-in to allow this but I cannot find where it is to install it.  Can anyone help?  My version of LR5 is up-to-date.  I am using a Mac OS 10.8 and installed LR5 from a download from Adobe yesterday.  I can imprt raw files from my Nikon D80 but not the D7100.  The files are all on my hard drive.

No plug-in is needed to import RAW files from a Nikon D7100 to LR5.
However, if you have used certain versions of Nikon software to move the photos from the camera to a hard disk, then this may be interfering, and causing LR to not recognize the photos. The solution is to import directly from the camera card to Lightroom (if the photos are still on the camera card), or if not try http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Similar Messages

  • Problems importing raw files into Lightroom 3.4

    I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom.  I havent had a problem before.  Can anyone help me?  My camera is a Nikon D7000.

    Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

  • Lightroom 4 does not import RAW files from D610

    I've just purchased Nikon D610, and my Lightroom 4 is not importing RAW files anymore. What is the problem?

    The current version of LR 5 is 5.7 so I’d guess LR 6 will be out at some point later this year, in the next few months.  If money’s no object then upgrade to LR 5, now and to LR 6 in a few months.  If you’ll be very upset to learn you’ve paid $80 to upgrade and then need to pay another upgrade fee for LR 6 then maybe wait and do the DNG thing for a few months, and then upgrade from LR4 to LR6.
    The other concern is whether your OS is new enough.  I’d suggest you download the latest LR 5.7.1 update and run that in trial mode for a few weeks—you have 30 days, to make sure your computer can handle it, before spending the money and finding out you need a new computer, first.
    The other thing to consider is the $10/month Photography Plan subscription which gets you the most up-to-date versions of Lightroom and Photoshop as long as you keep paying.  Since you have your old LR4 serial number, you can decide to cancel the subscription after a year and use the LR4 serial number to buy the LR 6 upgrade, then.  This assumes that LR 6 will be available as a serial-number-licensed product, still.
    The latest LR 5.7.1 update is here:
    http://www.adobe.com/downloads/updates
    The lens profiles added to each version are listed here:
    http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html

  • Lightroom 5.6 won't import raw files from Nikon D750

    I have Lightroom 5.6 and it will not import RAW files from my Nikon D750.  Any thoughts?

    This camera's RAW photos are not supported by Adobe software at this time. Please read this thread: Support for Nikon D750

  • I can't import raw files into lightroom

    I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

    I don't use nikon software.  I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
    Sent from Yahoo Mail on Android
    From:"dj_paige" <[email protected]>
    Date:Thu, Apr 23, 2015 at 10:22 AM
    Subject:[Photoshop Lightroom] I can't import raw files into lightroom
    I can't import raw files into lightroom
    created by dj_paige in Photoshop Lightroom - View the full discussion
    Do you have Lightroom 5.3 or higher?
    Did you use Nikon software at any point on these photos?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?

    Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?
    Error message that it does not support cr. file

    Which version of Lightroom?
    As Hal points out, if it's pre v 4.1, you can't expect an old version of the software to know what to do with a camera that didn't even exist when the software was released.
    Given how many times a day this same issue comes up, maybe it's time Adobe changed the error message to something like "your camera is too old to be supported by this version of Lightroom. Please upgrade" or similar... 

  • How do I get lightroom to import raw files from my samsung nx500?

    I just got a Samsung NX500.  When I try to import raw files into Lightroom 5.7 it won't work.  I tried the update to 5.7.1 that fixed the problems for the NX1 and it still doesn't work.  Any ideas?

    http://downloadcenter.samsung.com/content/UM/201503/20150313082358453/NX500_English.pdf
    Page 197 - download the DNG converter for Samsung that is listed in their manual. Convert to DNG and import into Lightroom.

  • Is it true that Lightroom 4,4 has an issue importing RAW files from Nikon D610 ?

    Is it true that Lightroom 4,4 has an issue importing RAW files from Nikon D610 ?

    Hi Kenneth L,
    Please use the below link to convert your raw files to DNG files then you would be able to import the files in Lightroom 4.4
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6 For Mac
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6 For Windows
    Thanks

  • Help! Troubles with updating Lightroom 3.2 to 3.6 in order to import RAW files.

    I am trying to import RAW files into Lightroom 3 from my Nikon D7000.  I read that I need to update my Lightroom, so I downloaded the 3.6 version.  I restarted my computer and reopened Lightroom and it is still showing the 3.2 version.  How do I get Lightroom to update after the new version has been downloaded?  Once this problem is fixed, then will I be able to import my .NEF files from my camera into Lightroom?

    After downloading you have to install it. Did you?
    Cheers.

  • Why won't Lightroom 2.3 suddenly not import RAW files?

    Why can't I import RAW files into Lightroom 2.3? I've imported them for years, until today, after I installed a Canon  Pixma MX860 multi-purpose printer. Would this affect Lightroom? Now I get a Lightroom message: "The files could not be written." Tried to import from Canon 5D on a CF card and from a Panasonic Lumix on an SD card many times. Same result. I can pull the RAW files individually off the cards into Photoshop CS3 RAW window and adjust them, but can't on Lightroom. It won't automatically import the files and won't take them manually. Am using a PC with XP Professional. Any thoughts?

    Are you sure it's the same problem as that user had?
    What error message are you getting when you try to import a raw file?
    What camera?
    What version of LR?
    What computer and operating system?
    Did your ability to import raw files just suddenly stop, or have you never been able to import them?
    Hal

  • Lightroom refuses to import RAW files.

    Hello,
    I have Lightroom version 1.4.1 (just downloaded the update), and cannot upload RAW files from my Canon 20D or 5D. What happens is that Lightroom will either:
    (1) Upload just 12-15 files, then freeze up. The light on my camera stops glowing red and it says "busy" on the camera LCD display. After waiting 30 minutes I get the spinning rainbow ball on the screen. When I try a "Force Quit" Lightroom does not respond at all.
    -or-
    (2) Nothing at all happens! No images are uploaded, Lightroom freezes up and the camera does nothing.
    My setup is an Intel PowerMac with 8 gigs of memory, 3 1TB drives, and an Nvidia GFX 8800 graphics card. I am using OSX 10.5.4.
    I tried deleting the plist file at least 3-4 times, tried different cards in either of the cameras, and I always get the same results.
    Help!

    David
    Finally I found someone with the same problem I've been experiencing in the last 3 months.
    This problem actually started after on LR 1.4.1 but
    after I upgraded to LR 2.0, it now freezes half way on import just like you described, it actually take the OS hostage and not even force quit works, I have to force the system to shut down by pressing the power button.
    Then I tried to see if I could import with Bridge and I ran into the same problem and had to take the same action.
    I have switched cards, card readers and USB ports (used the front and back ports) but nothing seem to work.
    But when I use Image Capture to import raw files, it works fine, no problems there.
    I also upgraded the PS3/Bridge Camera Raw to the most recent version to be compatible with the LR 2.0 version.
    I also have the 20D and 5D but I use card readers instead of plugging the camera directly into the computer.
    It seems the problem is the way Leopard reads XMP data, that's something I found on a forum somewhere and it looks like Apple has not addressed this issue yet.
    I'm running Leopard on a 2.8 Gig / 8 core and 4GIGs of ram.
    For now, my solution to this problem is to import raw files from the card reader using Image Capture and down load them into my LR library.
    That's my 2 cents

  • Lightroom 5.3  won't import raw files from canon5d M2

    Lightroom 5.3 suddenly won't import raw files from canon5d M2.  what to do?

    The old "Reboot the Computer" trick worked.  I repeatedly was receiving a
    pop up saying "unable to import files to library".
    Phew... back in business now!
    www.laurielambrecht.com
    347-804-4332
    [email protected]
    .   BOOK<http://www.randomhouse.com/book/207248/roy-lichtenstein-in-his-studio-by-laurie-lambrecht>
    <http://www.nga.gov/programs/lectures/>
    <http://www.nga.gov/programs/lectures/

  • Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?

    Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?
    I can import the Raw file successfully but cannot see any edits that were applied in Capture One. Im assuming no but just checking.

    Your assumption is correct, Capture One, Lightroom and other third party raw processors have their own proprietary processes and profiles for rendering the raw data.
    They do not make permanent changes to the raw data and store the changes to an .xmp file or to a catalog file like Lightroom.

  • Trying to import RAW files but receiving "some import operation were not performed" error message.

    Trying to import RAW files (from Canon 5D Mark III) but I'm receiving the following error message "some import operations were not performed". I am trying to copy to my Seagate backup drive, however the only destination it will let me copy to is my Lexar flash drive (where I don't want to store them!).  I've checked all the file permissions--everything says "read and write". Not sure where to start   I recently switched to an iMac where the problems started (never any issues importing into Lightroom on my PC--just slowness). Please help! 

    NIKON D3300
    The Nikon D3300 Raw format is not yet supported in Lightroom 5 (currently 5.3).
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Raw file formats are proprietary to each camera manufacturer and specific to each camera model. Adobe's Camera Raw engine (used by both Adobe Camera Raw - as a plugin to Photoshop - and Lightroom) must be constantly updated with every new camera make and model which arrives on the market in order to read and edit Raw files from that camera.
    Adobe has added support for the D3300 to Camera Raw 8.4 which is about to be released. It is a Release Candidate (RC status) at the moment. So D3300 Raw support will probably be added to the next soon-to-be-released Lightroom update (5.4).
    http://labs.adobe.com/technologies/cameraraw8-4-cc/?tabID=details#tabTop
    In the meantime, you can download the free Adobe DNG Converter 8.4
    http://labs.adobe.com/downloads/cameraraw8-4.html
    Using the DNG converter, you can then convert the D3300 Raw files to DNGs then open and edit the DNGs in Lightroom 5.3.
    Once Lightroom 5.4 is released (assuming it also has D3300 support) the DNG conversion will no longer be required.

  • New Computer - Can't import raw files from Canon 1D mk 4

    I just bought a new Toshiba Qosmio laptop and have reinstalled PS CS5 and LR 3.2 64 bit.  LR says there are no other updates to install.  Trying to import raw files from CF reader but LR is not showing me the raw files on the import screen.  I have installed Camera Raw 6.2 plug in.  It's been a long night but I can't see why files aren't importing properly.  What am I missing?  All suggestions greatly appreciated.
    Thanks
    Mark

    Mark,
    The ACR plugin is not needed for importing files with Lightroom. LR has it's own "ACR" built in. The ACR plugin is used when opening Raw files from Photoshop.
    Try copying the files from your card-reader to your hard drive using explorer/finder, and try importing from there. There have been quite a few reports where the card reader (and its connection) have lead to trouble while importing into LR.
    Beat Gossweiler
    Switzerland

Maybe you are looking for

  • Creating tables on SQL studio and viewing the table in the SAP system

    i have just created a table using the SQL studio and wants to use it view it in the SAP system using the SAP logon. till now i have not found a way to create it therefore any help is much appreciated.

  • How to implement a Session Object.

    Hi, If anybody show me any example of how to implement session object so that I can store any parameters such as user id and use it later on. And also if there is any good web site for reference about using session object. thanks

  • Non-Cumulative keyfigure example

    Hi all,       To test for non-cumulative keyfigures I have modeled a keyfigure noofemployees and below is my model <b>Infocube has following characteristics, timecharacteristics and keyfigures</b> Charteristics: Companycode TimeChar: 0calmonth Keyfig

  • How to specify default folder for Open... command

    In apps (say Illustrator, for example) when I do an Open... command, I'm always dumped into the root folder of the hard drive. Is there a way to specify "last folder used" as the default? I seem to remember a way to set this as a default, but I could

  • Customer can't start software, need advice

    I have customer running Win2K that can't seem to launch our app. batch file loads Main.class Main.class checks for dongle and exp date once both are confirmed valid the following code launches our app try{                  rt = Runtime.getRuntime();