Lightroom 5 language suddenly switched to dutch, won't switch back

Hey,
Lightroom 5 today suddenly switched to dutch, even though in teh preferences screen it's still set to english. I can't find a way to switch it back to english. It seems to have done this after I installed the app manager update (which quite frankly is pretty horrid now).
Anybody happen to know how to get lightroom back to english? I don't want to have to relearn all these technical terms.
Regards,

I had the same issue on windows 7. I resolved it by moving the preferences file to desktop, setting lightroom language to auto, close lr, restart, set to english, restart.... issue resolved. If lr prompts to upgrade your catalog you've already upgrade, just move the rpefs file back to it's location (C:\Users\{username}\AppData\Roaming\Adobe\Lightroom\Preferences). Hope this helps.

Similar Messages

  • My iphone has suddenly turned off and won't turn back on

    This is a replacement phone as mine broke after updating I've only had it 3 months and now it's suddenly gone off and won't turn on I've tried the reset but it's totally blank if I return to the shop will I be made to pay again for a replacement??

    You say your tried a reset, holding the sleep/wake and home buttons until you see the Apple logo? How long did you hold the buttons, it could take up to 30 seconds of holding for it to work. If this doesn't do it, then plug the device into the charger for a minimum of 30 minutes, then try the reset again. If you still cannot reset the device, make an appointment for the Genius Bar. Paying for a replacement depends on the warranty status of that device.
    If your other device was under warranty, the replacement would have a warranty of 90 days or the balance of the original phone warranty, whichever is the longest.

  • My MacBook suddenly shut down and won't turn back on - how do I get it to turn back on?

    My MacBook suddenly shut down after freezing up and I cannot get it to turn back on again.  I tried the suggestions in the manual and none of them worked to turn it back on. Is there something I am not doing correctly?  The little green light on the charger connector is green but not as bright as normal, it was charged by over 70% before it shut down, so I do not think it is a battery problem.  Is there anything I can do to turn it back on?  Thank you for any help given, I really appreciate it.

    If it won't bong, then try an SMC reset.
    http://support.apple.com/kb/HT3964
    Can you boot in Safe Mode?
    http://support.apple.com/kb/HT1564
    Did you uninstall it this way?
    http://www.microsoft.com/getsilverlight/get-started/install/removing-silverlight -mac.aspx

  • Hi everyone, so I was on my MacBook Pro 10 mins ago and it all of a sudden shut down and won't turn back on? I haven't had it backed up for a while now but does anyone know what could have possibly happened and if it will affect my hard drive?

    My MacBook Pro 13inch won't turn on? It randomly shut down itself and won't turn on!!? Will it affect my back up? Hard drive disk? Because it has all my work and personal things I really need on there! Please if anyone can help me!!

    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    Mac OS X & Mountain Lion Community
    https://discussions.apple.com/community/mac_os
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
    Recovery Mode
    http://support.apple.com/kb/HT4718
    ExpressLane
    https://expresslane.apple.com/
    Startup Manager: How to select a startup volume
    http://support.apple.com/kb/HT131
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Direct you to the proper forum for MacBook :
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    http://www.apple.com/support/macbookpro
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro

  • My iphone 4s suddenly cut off and won't cut back on.

    It absolutely will not turn on. I tried holding the home and sleep button, but it failed. I tried charging it, and it only flashes the apple logo on and off again. I tried holding the buttons again while it did this, but it only tells me to plug it into itunes.
    I tried plugging it into my computer to reboot it from itunes, but guess what? Itunes won't recognize it. My computer, and every computer I"ve tried plugging it into won't recognize it either. Itunes is up to date, and I've tried every trouble shooting idea I"ve seen on this forum.
    I just bought this phone four months ago. It has been in an otterbox since the moment I opened it. It is not dinged, it is not scratched, it is not shattered... it is in absolutely perfect condition. It's absolutely positively ridiculous that my brand new phone is now a worthless piece of plastic unless I want to spend $200 to send it in to be fixed.
    I'm so peeved, and I'd be really grateful to anyone who can help me.

    If it's "brand new" it has a 1 year warranty. Take it to an Apple store and they will replace it. You can check the warranty status here: Apple - Support - Check Your Service and Support Coverage
    You can also try to restore it using Recovery Mode

  • My phone suddenly turned off and won't turn back on.

    My phone went off without warning and I can't get it to turn back on.  Whay would this have happened and how can I fix it?

    razmee209 is right, if your iPhone has stopped responding like wont turn OFF or ON. touch screen wont respond, do that 2 button reset (hold the sleep/wake button and home button until you see the Apple logo).

  • I was working on my iPad 1 and it turned off and now it won't turn back on.  It was 50% charged and even when I connect it to be charged it still won't turn on.  Is there a reset button?

    I was working on my iPad and it turned off suddenly and now it won't turn back on.  It was at least 50% charged and when I tried to connect the charger it still will not come on.  Is there a reset button?

    Thank you so much!  It worked, I was reading around and saw this has happened to a number of iPad users.  Thank you for your prompt response, I was so worried I broke it or something.

  • MIDI regions won't play back in Logic X

    Suddenly my MIDI regions won't play back. I can hear the notes when when I play on my MIDI controller and when I mark the MIDI notes in the piano roll, but not when play it back in the arrange window. This worked fine the last time I opened the project.
    - I have done a restart of all my equipment, computer and Logic.
    - Nothing is muted - not the track or the regions.
    - The MIDI in/out in the piano roll is ON.
    - The channel strip setting is set to ON.
    - This applies to all instruments.
    - It works as usual for MIDI written using the pen tool, but not for MIDI played on the keyboard.
    - MIDI channel are set to 1 (as seen in the event window).
    - Instrument channel is set to "all".
    Logic X 10.0.2
    OSX 10.8.4
    iMac early 2009
    2.66 GHz Intel Core Duo
    4 GB ram
    SATA disc
    M-Audio Fast Track Pro, with M-Audio Radium 49.
    Does anyone know what could be wrong? Any help is appreciated.
    Thanks!

    See if this is the problem.
    Is this an imported Logic 9 project file?
    Check the track Inspector settings and see if you have any over the top values for some of the settings (like Delay)

  • My phone all of the sudden is off and will not turn back on. It's a brand new iPhone 5

    My phone all of the sudden is off and won't turn back on.

    Hi Ashley0607,
    Welcome to the Support Communities!
    I'm sorry to hear you are having issues with your iPhone 5.
    Follow the steps below if the iPhone is not powering on:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    I hope this information helps ....
    Have a great day!
    - Judy

  • I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

    I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

    What I recommend you try doing first is to turn iMessage off then back on.  If that doesn't work, make sure that your Apple ID and password are correct.  If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
    Hope this helps!

  • New Ipad suddenly switches to foreign language

    I just purchased the New Ipad yesterday, and it looks like I will have to go through the trouble of getting another one.  I have done EVERYTHING.  I have contacted support and reconfigured the entire system, and the problem remains.  When I try to get an app, the language for the app store, game center, etc. changes to german (some things are still english, and some german...seems random), and there is no way to switch it back without hooking the device to my computer and pretty much wiping out the entire system and starting fresh (a good 2 hour process), just to have it happen AGAIN.  This Ipad was purchased for my speech-impaired father, and we got the Ipad for it's "easy" configuration and app selection (for assistive speech apps).  That is the only reason we got it, and we can't even use it for that one reason.  On top of this, the apps will not even download (though that could be because all the confirmation boxes suddenly switch to a language I cannot read).  This is ridiculous.  This is the first apple product we have purchased, and we are far from impressed.  I really want to smash it because it is worthless.    Is anyone else having this kind of problem?  I know I am a new apple user, but I am not stupid...even the technical person from apple support told me if the reconfiguration didn't work I'd have to get a new one.  What a hassle!

    iOS: How to change the language when it's set to one you don't understand
    http://support.apple.com/kb/HT2371
    Try this again  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    You may have to restore.
    Restoring iOS software
    http://support.apple.com/kb/ht1414http://support.apple.com/kb/ht1414
     Cheers, Tom

  • I have an iphone 3gs and it has suddenly switched off, it wont charge and it won't turn back on. HELP!!!!

    I have an iphone 3gs and it has suddenly switched off and it won't charge or switch back on HELP!!!!!!!!

    Do a reset hold down the home/power button together until you see the apple sign and then release, then wait for the phone to boot back up.  If that doesn't work - do the steps while your phone is plug into your PC.

  • My iMac20 powers off by itself and won't switch back on

    I'm sorry this is a bit of a saga but I'm at the end of my tether with so will be really grateful if anyone has any experience of this issue and can give me some help?
    The problem started in May when, after an hour or so of use, my iMac 20 suddenly started to turn itself off and wouldn't turn back on again until the following day. This happened around half a dozen times so I took the machine to the local Apple store and was told that it was probably the thermal trip and if I removed the power cord and left it disconnected for a while, it would power up again more quickly. That evening when it cut out, I followed the advice I was given and removed the power cord from the back of the machine but it made no difference and the machine would not restart until the following morning. Back to the Apple store I went and this time they took the machine in to the workshop; a day or two later I was told that they had cleaned out the fans and tweaked some software and had run it successfully on the bench for several hours with no problem. After paying £49, I collected the machine, took it home, ran it for an hour or so and off it went again and as before, refused to turn on. Back again to the Apple store; "Had I reloaded the operating system?" Well no, because I hadn't been told that I needed to. And anyway why would I... surely the thermal cut-out was a hardware issue? The response was that the problem was definitely software-based and nothing to do with overheating or a faulty power supply unit (which was/is my favourite candidate for villain of the piece). So off home I went, backed up my stuff and ran Disc One successfully and started running Disc Two. After about 20 minutes into Disc Two the machine did its usual trick and powered off, and I went looking for a bottle of wine.
    Back to the Apple store. The guy controlling the 'guest list' for the Genius Bar said that if I wanted to return the machine to the workshop that day it would be considered a new incident and there would be a further charge for any repair work. However, if I made a fresh appointment (for a couple of days later) then the work would be done as part of the previous 'repair'. Somebody at Apple really needs to look at the way the stores deal with dissatisfied customers.
    So, Saturday the 11th of July arrives and I head back to the Genius Bar for my free appointment. I explained to a very helpful guy that this is my fifth visit and I would like to get to the bottom of the problem. He referred to the tech person who dealt with the original workshop repair and she came out to explain that the issue is caused by 'something' lurking in my Library folder and that if I wipe my hard drive and re-install the OS from scratch but without the Library folder, the problem should be solved.
    I spent Sunday wiping the hard drive, running the OS discs and then reinstating my iTunes, photos etc and waiting for the machine to turn itself off - but it didn't! I left my external hard drive returning all my files and documents overnight and when I woke up on Monday, everything was still up and running... bliss!
    Then, this afternoon, after downing loading a music file in flac format, I found that it wouldn't go into iTunes without the help of Fluke software. I downloaded the Fluke stuff and then as I dragged the flac file into iTunes - boof! The machine went off and won't switch back on again.
    So finally... has anyone seen any similar behaviour with their iMac and was it caused by software or hardware? And if it is software that's causing the problem, why can't I switch the machine on again immediately?
    ,

    Amsys plc, the company Apple uses for off-site repairs returned my iMac20 today and the accompanying advice note states that the fault was resolved by replacing the power supply unit. I am really grateful to Apple for finally getting to the bottom of the problem, particularly as the repair was done free of charge, although I had already paid £49 for a useless workshop investigation at the Kingston store. The service given by Amsys was exemplary... the collection and return of the machine was carried out at the times promised and whenever I contacted the company by phone, each person I spoke to seemed to have knowledge of the repair without having to refer to the case notes (and none of the 'press 1 for service, 2 for sales...' rubbish).
    So once again BDAqua, many thanks for suggesting I call Apple... it's just a shame that the staff of the Kingston store refused to accept what was obvious to me.

  • Language input switching shortcut doesn't work

    Hi! I always use command-space to switch between English and Chinese (Cangjie) input (having disabled this shortcut for Spotlight), but all of a sudden it stops working. I know the command key works and the space bar works, but when I press command-space it does nothing. I have to click on the little language flag to switch language. I also tried restarting the mini.
    There is also something weird about the Chinese inputting now but I'll ask that in another post.
    Thanks!

    I've been having a similar problem, but a little more elaborate.
    It started with my Finder switching on its own from US (my default) keyboard input to Hebrew. I would just switch back using the shortcut (command+space bar), a shortcut I have been using for years without problems. Now the shortcut is giving me problems, and sometimes doesn't work, as steveappleotp describes.
    While in Safari, the shortcut failed to work. I checked my System Preferences for language input and nothing had changed. When I used the mouse to open the language input menu, 3 of the 6 languages were grayed out. But this doesn't happen consistently. All of a sudden everything is okay and I don't know how to recreate the problem.
    Thought I would post this here as it's recent and related, but maybe I should start another thread.
    Thanks.

  • My iphone4 seems to have switched off even tho there was 30% battery charge left.  It won't switch back on.  I've only had it on charge for about 10mins so far.  Any ideas?

    My iphone4 suddenly went blank even tho it had showed about 30% battery left.  I won't switch back on.  I've only had it on charge for about 15 mins so far.  Any ideas?

    Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

Maybe you are looking for

  • Form Builder and Graphics Builder Integration

    Does anyone have tested code fragments to do the following?: Send a mousedown event to a chart embedded in a form. Get back the section of a (pie) chart that was clicked. I used the genie to embed my chart, and then added some things with graphics bu

  • Where can I find a live chat with a representative?

    Where can I find a live chat with a representative? I'm about fed up with Verizon. Their're about as bad as AT&T!!!

  • Multibyte character

    Hi All, Oracle sql engine supports 4000 bytes for varchar2 columns . No matter we store 4000 characters (single byte characters)  or   n multibyte characters(where n<4000) .I am skeptical for those cases where the database supports multibyte characte

  • IDOC Flat File-- XI-- IDOC

    Hi,    I have a requirement wherein we have to read the IDOC flat file and post it as IDOC to SAP using XI. I understand we have to use the Flat File Sender adapter and the IDOC Receiver Adapter. On the Sender Side we have to define the Content Conve

  • IPhone 4S ios 6.1.2 Spotlight Search not Working!!!

    Hi Guys, I recently upgraded by iphone 4s to ios 6.1.2 and now i found out that the spotlight search is not working. when i try to search a contact and press search the keyboard slides down and the screen is empty does not show anything. Pls help wha