Lightroom 5 problems with Nikon D4 Camera

Lightroom 5 still presents a problem for the Nikon D4. Pictures are rendered significantly darker than the original shot. The histogram confirms the degrading of each picture. And the visual difference is un-mistakable. Have talked with Adobe twice. They had no solution. When I use the Nik Software View 2 the pictures are rendered perfectly. Why does Adobe say they have fixed the problem when they have not? The Adobe web site suggestes Lightroom 5 is now compatible with the Nikon D4.

Yes, you are right. Thank you for the help!
Regards,
Stephen
Stephen Stipe
Mira Vista Photography
“Happy Landing on a Chocolate Bar”
www.miravistaphotography.com

Similar Messages

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

I have got problem with my pc-cam 950 slim

I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
Thank you for taking the time to help me.

Originally Posted by Colin-CL
Hi,
Have you checked that you have put in brand new 2 x AAA batteries?
Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
hi,
Yes, I put two new batteries
When connected to the computer nothing happens
What can be done to reset it?
By replaced capacitor problem can be solved?

Problem with the back camera in iPhone 4 (Black Shadow)

Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?

It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with the front camera on iPhone 4

Hey, guys. Just faced a problem with the front camera on my iPhone 4. So, when it's enabled this thing is on screen and all the pictures taken on it also has it:
http://bit.ly/epZypp
I've never dropped the phone, it isn't jailbroken or unlocked, it was bought in Britain but using in Russia, the firmware is 4.2.1.
So, guys, can you help me?

Have you tried resetting your phone by holding down the sleep/wake button and the home button at the same time until the phone restarts?

I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Does Lightroom 5 support the Nikon D810 camera

Does Lightroom 5 support the Nikon D810 Camera?

Yes, download Lightroom 5.7
Mac Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7
Windows Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7

TS2634 I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry...

I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry... anyone has experimented this issue too? please let me know!

Did you put a screen protector on the phone or did you pull the protective film off the phone?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

I am trying to download my photos into I photo with my new Nikon S6300 camera and keep getting the message The file could not be imported the file is unrecognizable format had no problems with my Canon camera

Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help

I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you

Problem with Nikon 1 V1 Camera Profiles in LR4

- Import NEF
- Change profile to Camera Standard
- Change profile back to Adobe standard::
Image takes on a strong color cast, usually reddish.
Does not happen in LR 3.6.
Does not happen with my other cameras (Nikon D300, Canon S90).
Looks like a bug.
Hannu

It's a bug that the engineers have confirmed has been fixed in a later build, thanks.

Lightroom 5-problems with print colors

I have Lightroom 5 and am having problems with my prints. They look great in LR, but when I upload them to different websites for prints skin tones have a grayish-green cast to them and print with the grayish-green cast. I can pull them up in other applications, i.e. Windows photo gallery and Facebook and they look fine. I checked my preferences and they are set to sRGB. Any other ideas? For example I made an invitation for a friend, the pictures I processed in LR and then used Photoshop CS4 to make the invitation. The invitation colors printed great. She liked the pictures I had taken and asked to have those too. When she printed the actual pictures they had a grayish-green tint to them but the invitation looked fine even though it was made from the same pictures that came out grayish-green. Any help is greatly appreciated!

daniellem5290598 wrote:
I have recalibrated my screen and the pictures still look the same. I looked in my LR and made sure that sRGB is selected for the color space for external editing. Is there a way to check if the pictures exported with the prophotoRGB instead of sRGB? I tried looking in properties on the photo and didn't see anywhere where it would tell me whether it was sRGB or prophotoRGB. I am kinda new to all of this so maybe I am looking in the wrong place, but I was under the details tab in properties on the photo.
The recalibration was just a "also nice to make sure you have done this". Just to check if you don't have another rare problem. The root cause of your problem is clearly that your exports are not sRGB. You set that in the export screen as Per nicely shows. You should keep the color space for external editing that you set in preferences at prophotoRGB. That one has nothing to do with your exports and you're usually better off using the default.
You can check your exported images using several options. On Macs, you simply open it in preview and do a get info (command-I) on it or use Photoshop. You can also see the color profile in the "more info" tab in the "get info" panel in Finder. In the general pane you will see the profile name. On a windows machine it is somewhat more difficult for me to tell you as I have none anywhere near but if you have Photoshop, you can open your jpeg in that and at the bottom of the window click the little sideways triangle that points to the right and select "Document Profile".

RAW file problem with Nikon D7100

Ijust purchased a Nikon D7100, and I'm unable to upload and edit RAW files(NEF) in Lightroom 3.6. Nikon provided no help. Can anyone offer a solution?

Have you downloaded the Codec from Nikon. I use both Windows Vista and Windows 7. I downloaded the Codec of the Nikon D7100 yesterday and installed it and I don't have the latest Capture NX, I have the original I brought shortly after buying my D200. I can now use the D7100 files directly into my Capture NX software. ViewNX gives you the basics of Raw editing but Capture NX gives you the advantage of using the U point system. I found this out purely by accident. If you can download the Codec free of charge and pick up a cheap old Capture NX you can get all your EXIF data as well as lense data without any issues.. The Camera companies pay Adobe a license fee for using the Adobe Gamma in their cameras so why should they pay more for file format. Adobe is very protective over its intellectual property so why not with Canon or Nikon. They comply with the consumer trade agreements on EXIF and image authentication. Nikon have cameras in Space which is more than Adobe ever dreamt of. So file format has little or nothing to do with compatibility.

Problem with threads and camera.

Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while((!performing.isShown()) && (backgroundCamera.isShown())){
                    Thread.yield();
                notifyAll();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    this.wait();
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?

Hi,
I've finally managed to work this fine.
The code:
       Object o = new Object();
       display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while(!performing.isShown()){
                    Thread.yield();
               synchronized(o) {
                  o.notify();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    synchronized(o) {
                       o.wait(1);
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();

Lightroom 5 problems with Nikon D4 Camera

Similar Messages

Maybe you are looking for