Lightroom 5 - registration issue
Hi there!
I recently bought Lightroom 5 (Student Edition) on amazon.de and created an account on adobe.com in order to register my product. However, my product key is not recognized. I already contacted the amazon support, but they refered me to the adobe support since there is no problem at their end. The product key I received after my pruchase looks like this: LTRMP0-xxx-yyyy-zzz-cccc and my amazon order number was #305-3005128-0253964 - if that helps.
Hope you can help! Cheers, Martin
Hi Lamsch,
The product key for Lughtroom does not appear right to me.
You need to contact Adobe Customer Service (http://helpx.adobe.com/contact.html ) to validate the same.
You can even reach our chat support at http://adobe.ly/yxj0t6
Similar Messages
-
Jabber for Windows Registration Issue
I have been facing issue with J4W registration and display error "no connection to server". Following is the version detail:-
Version CUCM and IM&P---> (10.5.2)
On-Premises login
During analysis, i found 2 things in logs:-
1). Unable to download jabber-config.xml file (Download of TFTP File failed for server ) //// all the other xml files are succesfully downloaded which may indicate that there is an absence of jabber-config.xml file.
2). While signing into presence "OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>: "
[rc\cert\common\BaseCertVerifier.cpp(250)] [csf.cert.] [cert::BaseCertVerifier::checkIdentity] - About to verify the Subject Alt Name.
[ls\src\cert\common\CertVerifier.cpp(154)] [csf.cert] [cert::CertVerifier::checkIdentifier] - Verifying identity '162.20.10.30'
[rc\cert\utils\AltNameParserImpl.cpp(349)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - Looking for match with 162.20.10.30
[rc\cert\utils\AltNameParserImpl.cpp(400)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - No Match Found
I tried to change the IP address to FQDN under System---> Server, but after that the connection is lost between CUCM and IM&P.
Attached is the log file and snapshot of IM&P.
- See more at: https://supportforums.cisco.com/discussion/12490406/jabber-windows-registration-issue#sthash.E2wXb4iJ.dpufNishant,
Sorry for the late reply. You may well have resolved this by now, if you have can I suggest that you update the post with the resolution so others may benefit.
Looking at the logs, I can see that Jabber is trying to login to the IMP server below, but its returning server unreachable error.
Signing into Presence Server. Server: 162.20.10.30, login mode: ON_PREM, result: 0
[IMPStackCap::Login::OnLoginError] - ****************************************************************
[IMPStackCap::Login::OnLoginError] - OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>:
[IMPStackCap::Login::OnLoginError] - ****************************************************************
We will need to look at the IMP logs to know what is going on. Let me know if you still need help with this. -
Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?
You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck. -
I just purchased Lightroom 5 after completing the 14 day trial. The trial worked fine, but when I enter my purchased serial number, and registration information, clicking "finish" only closes the program. I am running OS X Mavericks developer preview, although, as I said before the trial did work. Has anyone else run across this issue or found a fix?
I just purchased an upgrade serial number for Lightroom 5 today. I am having the same problem with "Finish" closing the program. I am running OSX 10.8.4. I downloaded Release Candidate 5.2 and it runs in trial mode so I have 30 days to figure this problem out. I am running a subscription to Photoshop CC and maybe this is part of the problem.
-
Hi All,
We have done the sso registration successfully , but sso login functionality is not working as expected.
Please provide some inputs to fix this issue.
Environment
We are on 11gR2 database for both OID and EBS 11.5.10.2.
OID version 11g on web logic server.
SSO server version is 10.1.4.3
In the front end it is showing the below error while login using the SSO URL.
"The Single Sign-On server registration is invalid. Please contact the System Administrator. "
When we run the below query in the backend (EBS R11 DB) it suppose to get the records without any error or it is suppose to show just “no rows selected”, but I got the “ORA-29275” error in the backend
Query: select FROM FND_USER_PREFERENCES WHERE USER_NAME = '#INTERNAL'*
and I ran the FND Log Query, found these messages..."END with errors for getSSOVerion"
Query--> select * from fnd_log_messages where module like '%fnd.sso.FNDSSOLoginRedirect%' order by timestamp desc;
out put:
MODULE,LOG_LEVEL,MESSAGE_TEXT,SESSION_ID,USER_ID,TIMESTAMP,LOG_SEQUENCE,ENCODED,NODE,NODE_IP_ADDRESS,PROCESS_ID,JVM_ID,THREAD_ID,AUDSID,DB_INSTANCE,TRANSACTION_CONTEXT_ID
fnd.sso.FNDSSOLoginRedirect,6,END with errors for getSSOVerion,-1,-1,7/7/2011 5:39:36 PM,16151017,N,agsos186,155.108.22.210,5161,8230:16210,Thread[Thread-17669,10,main],46984138,1,3762242
I have run the below mentioned steps to register the sso with EBS R11.
Registration Steps
txkrun.pl -script=SetSSOReg -registersso=Yes
txkrun.pl -script=SetSSOReg -registeroid=Yes -provtmp=$FND_TOP/admin/template/ProvBiDiNoCreation.tmp (Here basically I don’t want provision/create the users by default in EBS or OID). Even I tried default option its not working ( by default it provision /create in both places EBS and OID)
LOG
Oxxx(APPS2)$txkrun.pl -script=SetSSOReg -registersso=Yes
Enter the host name where Oracle iAS Infrastructure database is installed ? xxxxxxxxx2.com
Enter the Oracle iAS Infrastructure database port number ? 1510
Enter the Oracle iAS Infrastructure database SID ? xxx2eee
Enter Oracle E-Business apps database user password ? xxxxxxx
Enter Oracle iAS Infrastructure database ORASSO schema password ? xxxxxx
Enter Oracle E-Business SYSTEM database user password ? xxxxxxx
Enter E-Business Suite existing SSOSDK schema password or choose a password to use with the new SSOSDK schema if the schema does not exist ? ssosdk
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /aifsd03/ifs/applmgr/xxxxcomn/rgf/xxxxxxxx_agsosxxx/sso/txkSetSSOReg_Fri_Jul_1_13_52_00_2011.log
Program : /aifsd03/ifs/applmgr/Oxxx/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl started @ Fri Jul 1 13:52:18 2011
*** Log File = /aifsd03/ifs/applmgr/xxxxxxxppl/rgf/xxxxxxxppl_agsos/sso/txkSetSSOReg_Fri_Jul_1_13_52_00_2011.log
######################## WARNING ########################################
This application works with SSOSDK version 9.0.2 or higher. If lower version
(3.0.9) of SSOSDK was installed in your system and you have a registered
partner application, this process will remove the 3.0.9 version of the SSOSDK
schema and install the 9.0.2 version.
######################## WARNING ########################################
Beginning input parameter validation for SSO registration.
Beginning loading SSO SDK into database if necessary.
Loading of SSO SDK into database completed successfully.
Input parameter validation for SSO registration completed.
BEGIN SSO REGISTRATION:
Beginning to register partner application.
Partner application has been registered successfully.
Single Sign-On partner application registered successfully.
End of /aifsd03/ifs/applmgr/xxxxxxxppl/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl : No Errors encountered
Oxxx(APPS2)$txkrun.pl -script=SetSSOReg -registeroid=Yes-provtmp=$FND_TOP/admin/template/ProvBiDiNoCreation.tmp
Enter the host name where Oracle iAS Infrastructure database is installed ? XXXXXXXXXXXXX2.com
Enter the LDAP Port on Oracle Internet Directory server ? 3010
Enter Oracle E-Business apps database user password ? XXXXX
Enter the Oracle Internet Directory Administrator (orcladmin) Bind password ? XXXXX
Enter the instance password that you would like to register this application instance with ? XXXXXX
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /aifsd03/ifs/applmgr/xxxxxxx0comn/rgf/xxxxxxxxx_agsosxxx/sso/txkSetSSOReg_Fri_Jul_1_13_58_14_2011.log
Program : /aifsd03/ifs/applmgr/xxxxxxxppl/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl started @ Fri Jul 1 13:59:50 2011
*** Log File = /aifsd03/ifs/applmgr/xxxxxxxppl/rgf/xxxxxxxppl_agsosxxx/sso/txkSetSSOReg_Fri_Jul_1_13_58_14_2011.log
Beginning input parameter validation for OID registration.
Input parameters validation for OID registration completed.
BEGIN OID REGISTRATION:
Beginning to register Application and Service containers if necessary.
Application and Service containers were found and thus not created.
Beginning to register application in Oracle Internet Directory.
Registration of application in Oracle Internet Directory completed successfully.
Beginning to register instance password in Oracle Internet Directory.
Registration of instance password in Oracle Internet Directory completed successfully.
Beginning to test application registration in Oracle Internet Directory.
Testing of application registration in Oracle Internet Directory completed successfully.
Beginning to register provisioning profile in Oracle Internet Directory.
Registration of provisioning profile in Oracle Internet Directory completed successfully.
Application is now registered successfully with provisioning in Oracle Internet Directory.
End of /aifsd03/ifs/applmgr/xxxxxxxppl/fnd/11.5.0/patch/115/bin/txkSetSSOReg.pl : No Errors encountered
Edited by: reddy1198 on Jul 8, 2011 2:36 PMPlease see if (The Single Sign-On server registration is invalid [ID 434752.1]) helps.
Thanks,
Hussein -
Lightroom 5 download issue!
I Have a mac computer and im trying to download the free trial but when i click on the file in the downloads i keep getting this: "Couldn't open "Adobe Photoshop Lightroom 5.pkg". and it stating it can not be completed. Is it not compatable with my mac book pro?
Or is it because i have lightroom 2 on my computer not and its causing an issue?
Should i delet light room two and try to reinstal it aging?
Im normaly a pretty computter savy person but this just seem to be not working!Adobe does not sell it. You may be able to find one for sale on Amazon, but be careful you are buying from Amazon not somewhere that is just selling pirated software.
Is there a reason you can’t run Mavericks, which I think it a free upgrade? -
Portal Self registration issue
Hi guys,
I had activated Portal self registration with companies feature. what i did is , i assigned one role (ess portal role in which all my ess screens are covered) to authenticated group and every_user_core_role to anonymous group and did necessary configuration in configtool . The problem i am facing is that my self registered users are able to see my portal role without any approval (via approve/ deny in user administration) which i want to show them after approval . PLs guide what might me the issue.
Regards,
Shwetang Saxena.Hello Soni!
Please review and follow the steps mentioned here:
Companies and Self-Registration with Approval (SAP Library - User Management of the Application Server Java)
https://cw.sdn.sap.com/cw/docs/DOC-110636
Hope this helps,
Edison -
When clicking "Edit Copy with Lightoomroom Adjustments" from Lightroom, I get an error in Lightroom 3 complaining that the Camera Raw plug-in is not up to date; full message below.
"This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.1 for full compatibility.
Camera Raw version 4.6 is the latest version available for Photoshop CS3. If raw file support for your camera was introduced after Camera Raw 4.6, the Photoshop integration features in Lightroom require Photoshop CS4 and the latest Camera Raw version 5 plug-in.
The version of Camera Raw plug-in currently installed is 0.0."
After I click "Open Anyways", Photoshop CS5 is initiated but it seems to have lost context of why it is opened and asks me what file I want to open (i.e. the Open As dialog).
"Edit Copy" and "Edit Original" from Lightroom 3 works as expected and opens images fine in Photoshop, CS5 however.
My installation is on Windows 7. I currently also have Lightroom 1.4 and Photoshop CS3 installed. Everything worked fine with the old configuration. I also tried the same workflow in Lightroom 1.4 again just now, which is now linked to CS5 instead of CS3. The "Edit Copy with Lightroom Adjustments" also work just fine.
Things that I have tried but do not worked:
I did an Update via the Help -> Update menu, and also manually downloaded the Camera Raw 6.1 plug-in.
Blew away the Photoshop preferences file
Made sure that Lightroom 3 points to Photoshop for editor
I'm thinking that I'll try uninstall CS3 next. Anyone else encountered this issue?[CS5.1 (12.1) ACR 6.5RC / LR 3.5RC; MacbookPro 4gb Leopard 10.5.8 ] As a Lightroom instructor, up until now this has been a vexxing problem to explain to my students. Even if ACR in Photoshop is up to date (I just downloaded 6.5RC and installed the PS Plugin), I still get the error when attempting to edit from Lightroom 3.5RC. I deleted the PS prefs file to no avail. I was not willing to re-install Photoshop as a solution (per some blog's suggestion), although that might be the ultimate answer. But what an ordeal if so!
For a solution, I went back to a resolution I devised when I had a CS3 compatibility problem with LR3. I went into the Preferences of Lightroom and manually chose the Photoshop app as the "custom" image editor. I went back to edit the file in PS from Lightroom and the ACR error disappeared. Try it. Yes, this means you need to use the Custom editor as your image editor, but it seems to have resolved the issue. -
Lightroom 4 performance issues
Hello,
Months ago I switched from Aperture 3 to Lightroom 3 and quickly fell in love with the program.
I switched due to constant freezing and crashes in Aperture 3. I invested time and money to learn Lightroom 3. Performance in Lightroom 3 was superb. Anything I would do with regards to any type of adjustment gave instant results on the screen. Program never crashed or froze onec. Quite frankly, I was shocked in a very positive way.
This was on Macbook Pro i5, 8GB RAM, Hi Res Antiglare screen with Snow Leopard.
I purchased Lightroom 4. I did a clean install of OSX Lion and, clean install of LR4. New catalogs, no importing of anything. LR 4 is sooo slow. It works just like Aperture 3 worked, the precise reason that made me dump it.
The longer LR4 is opened, the slower it becomes. The more adjustments are applied, the slower it becomes. I will use brush and I have to wait to see results. I can't use brush. It takes me 15-30 min to brush small part of the image. I will slide adjustments and wait. I will click on crop tool and wait, wait, wait. I really love this program but I just can't work like that.
Would anyone share some light or advice on what could be done, on what is going on?
Thank you.Rob,
I am working with NEF files and have done so in LR3. I understand from some reading that one of the benefits from converting files to DNG is that they are faster to work with. So I just copied one of my NEF as DNG and I have been working on it for about 15 minutes applying brush after brush and other adjustments to see if LR4 will slow down. Thus far it has been incredibly faster. I will continue to work on this one image and maybe convert few more to DNG to test but do you think that there might be some issue with NEF format? Another bizzare thing I just noticed is that when I open NEF image, my memory quickly goes up to over 3GB and that's not even during applying adjustments. Working now with DNG, memory is just around 1.3 GB. WHAT IS GOING ON HERE???
I wonder what type of files are other LR4 users that are reporing performance issues working with.
Please share your thoughts.
Thank you. -
Lightroom/CS3 color issues on Mac
Hello,
I've seen a few posts about color issues, and I've tried following the advice posted, and I'm still having a problem. My photos appear fine in PS and in Lightroom (as well in in Mac's previewer) but when I upload them to the web or view the saved file on another computer, they appear severely desaturated with a blue tone.
I'm using running Mac OX X on a new MacBook Pro. I have Lightroom and CS3 installed and fully patched.
I am shooting in RAW with my Nikon, and importing the photos to Lightroom. In Lightroom, I choose "edit in CS3" and then the file opens in CS3. My settings for that are to open it as a 16 bit PDF ProPhoto RGB. My color settings in CS3 are set to ProPhoto RGB working space, preserve embedded profiles, ask when opening and pasting.
The files still look great when I open them in PS, and then I save them and when I look at them again in Lightroom they also look good (the same). However, if I export them as .jpgs from Lightroom, or save them directly from CS3, they lose their color quality.
I've found that if I change my proof setup to "monitor RGB" then I can see the photos the same way they appear when saved (the bad, desaturated version).
I would really appreciate any help anyone could provide. I am generally happy with my Lightroom/CS3 workflow, but I'm totally baffled with this color issue.
EmilyWell, I think what you need to do is get a better grasp on the fundimentals of color management-which is a bit beyond the scope of what the forums can offer you.
The bottom line is that Lightroom & Photoshop CSx (meaning past CS or actually even back to 7) can and does make use of display profiles (you can't turn it off even if Photoshop has a setting that makes you think you can). An image in Lightroom and Photoshop is always color managed...outside of an app that is color management, all bets are off.
Save, assigning and converting to profiles are all very different. Photoshop CS3's color settings are absolutely critical because that's how you deal with managed and unmanaged color.
Until you learn different, I would suggest that you set your CS3 color settings to North American PrePress 2....if you want images for the web, Convert To sRGB or use the new Save For Web (which can now do the sRGB conversion-finally).
For other uses and purposes, I would suggest that you seriously consider using Adobe RGB-until such time that you understand the implications of using Pro Photo RGB. -
Registration issues.... Solaris 10 - 06/06
Having issues registering my V440 running Solaris 10 06/06. I have posted the error below and them some system information below that. any help is appreciated.
sysax /: /usr/sbin/sconadm register -a -r /usr/lib/breg/data/RegistrationProfile.properties
sconadm is running
Authenticating user ...
Exception in thread "main" java.lang.reflect.UndeclaredThrowableException
at $Proxy1.getInstanceName(Unknown Source)
at com.sun.scn.client.SCNClientSession.login(SCNClientSession.java:371)
at com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter.loginAccount(ClientLoginCacaoAdapter.java:209)
at com.sun.cns.basicreg.BasicRegCLI.authenticateUser(BasicRegCLI.java:1079)
at com.sun.cns.basicreg.BasicRegCLI.run(BasicRegCLI.java:669)
at com.sun.cns.basicreg.BasicRegCLI.main(BasicRegCLI.java:562)
Caused by: javax.management.InstanceNotFoundException: com.sun.scn:name=SCNBaseServiceFactory,assetSubProfile=Factory,host=sysax.consolidated.com,assetProfile=Factory,scnType=ServiceFactory,Vendor=Sun Microsystems Inc
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1010)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:1349)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getClassLoaderFor(JmxMBeanServer.java:1300)
at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:285)
at com.sun.cacao.agent.DispatchInterceptor.getClassLoaderFor(DispatchInterceptor.java:474)
at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.getClassLoaderFor(AccessControlInterceptor.java:427)
at com.sun.jdmk.JdmkMBeanServerImpl.getClassLoaderFor(JdmkMBeanServerImpl.java:1130)
at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.getClassLoaderFor(InstrumDefaultForwarder.java:153)
at javax.management.remote.rmi.RMIConnectionImpl$4.run(RMIConnectionImpl.java:1306)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.getClassLoaderFor(RMIConnectionImpl.java:1303)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:766)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:595)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:126)
at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnectionImpl_Stub.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:969)
at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:201)
... 6 more
sysax /: cat /etc/release
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
sysax /: cat /var/sadm/system/admin/CLUSTER
CLUSTER=SUNWCall
sysax /: java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Server VM (build 1.5.0_06-b05, mixed mode)
sysax /: smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
sysax /: cat /usr/lib/breg/data/RegistrationProfile.properties
# CLI registration profile template version 1.0
# ******** WARNING ********
# This profile contains sensitive data: passwords and subscription
# keys. You should take care in how you handle it, ensuring that it
# is always adequately protected (mode 400 or 600, owned by root)
# and not stored on insecure file systems like those exported through
# standard NFS.
# Sun Online account information. A new account can be created by visiting
# http://updates.sun.com
userName=**************
password=***********
# Name (label) of this machine as you would like it to appear on the Sun Connection
# portal. If left blank hostname will be used
hostName=devdbs01
# Service Plan / contract number with Sun. For more information on this topic
# please visit http://www.sun.com/service/warrantiescontracts/ . NOTE - a
# subscription key is required to use the Sun Connection Portal.
subscriptionKey=***************
# Allow this host to be managed by the Sun Connection Portal. If set to true,
# a subscription key is required.
portalEnabled=true
# HTTPS proxy information needed to connect to Sun for registration and patch
# updates.
proxyHostName=
proxyPort=
proxyUserName=
proxyPassword=The error message I received was from the Sun Update Connection GUI. Once the patches I attempted to apply failed.
sysax /tmp: ./suc.sh.2
$USER:
$LOGNAME: root
Sat Feb 24 13:37:07 CST 2007
sysax
smpatch get:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
119252-15 SunOS 5.10: System Administration Applications Patch
119081-25 SunOS 5.10: CD-ROM Install Boot Image Patch
124630-03 SunOS 5.10: System Administration Applications, Network and Core Libraries Patch
124188-02 SunOS 5.10: Trusted Solaris Attributes Patch
119315-07 SunOS 5.10: Solaris Management Applications Patch
121308-08 SunOS 5.10: Solaris Management Console Patch
119313-10 SunOS 5.10: WBEM Patch
119534-10 SunOS 5.10: Flash Archive Patch
119254-34 SunOS 5.10: Install and Patch Utilities Patch
119963-08 SunOS 5.10: Shared library patch for C++
120753-03 SunOS 5.10: Microtasking libraries (libmtsk) patch
123494-03 X11 6.6.2: fontconfig patch
119812-02 X11 6.6.2: Freetype patch
125014-02 SunOS 5.10: IP filter patch
120780-03 SunOS 5.10: ixgb patch
119764-05 SunOS 5.10 : ipmitool patch
124258-01 SunOS 5.10: ufs and nfs driver patch
124252-01 SunOS 5.10: nfssrv patch
120812-15 OpenGL 1.5: OpenGL Patch for Solaris
123839-04 SunOS 5.10: Fault Manager Patch
124204-04 SunOS 5.10: zfs patch
122911-02 SunOS 5.10: Apache 1.3 Patch
120543-08 SunOS 5.10: Apache 2 Patch
117463-04 SunOS 5.10: passwdutil Patch
118890-03 SunOS 5.10: llib-lc patch
125024-01 SunOS 5.10: basic audit reporting tool patch
123908-01 SunOS 5.10: ar patch
120887-06 SunOS 5.10: cdrw patch
119580-05 SunOS 5.10: libcpc Patch
124244-01 SunOS 5.10: /usr/bin/rm patch
119685-10 SunOS 5.10: svc.startd patch
124997-01 SunOS 5.10: /usr/bin/tip patch
121081-06 SunOS 5.10: Connected Customer Agents 1.1.0
120845-04 SunOS 5.10: auditd patch
124235-01 SunOS 5.10: libpam.so.1 patch
120050-05 SunOS 5.10: usermod patch
122525-03 SunOS 5.10: Sun Fire V445 patch
124614-01 SunOS 5.10: sconadm proxy: UnknownHostException
120986-10 SunOS 5.10: mkfs and newfs patch
125040-01 SunOS 5.10: /usr/lib/inet/in.mpathd patch
122517-03 SunOS 5.10: Sun Fire V215/V245 platmod patch
125035-01 SunOS 5.10: libinetsvc.so.1 patch
123334-04 SunOS 5.10: e1000g_transition patch
122660-07 SunOS 5.10: zones patch
119998-02 SunOS 5.10: arp, ip, ipsecah drivers patch
125026-01 SunOS 5.10: message queue patch
118371-08 SunOS 5.10: elfsign Patch
123328-01 SunOS 5.10: expr patch
123520-01 SunOS 5.10: basename & dirname patch
123915-01 SunOS 5.10: libcfgadm.so.1 patch
125018-02 SunOS 5.10: scsi_vhci driver patch
123912-02 SunOS 5.10: ppriv patch
118367-04 SunOS 5.10: csh Patch
125016-01 SunOS 5.10: audit and init patch
119824-02 SunOS 5.10: prstat patch
123910-01 SunOS 5.10: platform_sun4v.xml patch
122255-04 SunOS 5.10: etc/flash/precreation/caplib patch
123319-01 SunOS 5.10: sysacct patch
118557-07 SunOS 5.10: platform/sun4u/kernel/drv/sparcv9/su patch
123271-01 SunOS 5.10: iwscn patch
124922-02 SunOS 5.10: ld.so.1 patch
123301-01 SunOS 5.10: i2c_svc patch
124325-01 SunOS 5.10: rcm modules patch
121561-04 SunOS 5.10: keymap patch
124918-02 SunOS 5.10: devfsadm, devlinks, drvconfig patch
122032-04 SunOS 5.10: Update timezones patch
124916-03 SunOS 5.10: sd, ssd drivers patch
121002-03 SunOS 5.10: pax patch
123252-01 SunOS 5.10: platform/SUNW,Netra-T2000 patch
122412-01 SunOS 5.10: ipseckey patch
122408-01 SunOS 5.10: libmtmalloc patch
120473-02 SunOS 5.10: nss_compat patch
124254-02 SunOS 5.10: sockfs patch
124250-03 SunOS 5.10: rpcmod patch
122752-04 SunOS 5.10: FMA snmp patch
124999-01 SunOS 5.10: mc-us3 driver patch
125319-01 SunOS 5.10: rmc_comm patch
125028-02 SunOS 5.10: pcipsy patch
118879-02 SunOS 5.10: dhcp daemon patch
118815-05 SunOS 5.10: awk nawk patch
121286-04 SunOS 5.10: libfru.so.1 and libfrureg.so.1 patch
122363-02 SunOS 5.10: fru_container.conf and libfruaccess.so.1 patch
119974-07 SunOS 5.10: fp plug-in for cfgadm
120222-15 SunOS 5.10: Emulex-Sun LightPulse Fibre Channel Adapter driver
119130-33 SunOS 5.10: Sun Fibre Channel Device Drivers
120182-05 SunOS 5.10: Sun Fibre Channel Host Bus Adapter Library
120346-06 SunOS 5.10: Common Fibre Channel HBA API Library
124943-01 SunOS 5.10: SunFreeware gzip man pages patch
122675-01 SunOS 5.10 : SunFreeware samba man pages patch
123809-01 SunOS 5.10: rpcsec_gss patch
121239-02 SunOS 5.10: libgss patch
120719-02 SunOS 5.10 : SunFreeware gzip patch
118925-05 SunOS 5.10: unistd header file patch
124208-01 SunOS 5.10: Trusted Extensions header files patch
124280-01 SunOS 5.10: libkdb.so.1 patch
120469-05 SunOS 5.10: kerberos patch
121006-02 SunOS 5.10: libkadm5 and kadmind patch
124991-01 SunOS 5.10: llc2 driver patch
124286-01 SunOS 5.10: chkey core dump
123186-02 SunOS 5.10: NIS yp utilities patch
124987-01 SunOS 5.10: ldap_cachemgr patch
119470-10 SunOS 5.10: Sun Enterprise Network Array firmware and utilities
122404-01 SunOS 5.10: xntpd patch
124990-01 SunOS 5.10: Sun-Blade-100 libprtdiag_psr.so.1 patch
121944-02 SunOS 5.10: libpsvcpolicy and libpsvcpolicy_psr patch
122537-02 SunOS 5.10: libpiclenvmon.so.1 patch
123590-02 SunOS 5.10: PostgresSQL patch
120629-05 SunOS 5.10: libpool patch
124993-01 SunOS 5.10: in.ndpd patch
125011-01 SunOS 5.10: sendmail patch
125022-01 SunOS 5.10: usr/sbin/sar patch
122376-01 SunOS 5.10: prex patch
120068-03 SunOS 5.10: in.telnetd patch
124995-01 SunOS 5.10: ehci driver patch
121010-05 SunOS 5.10: rpc.metad patch
124256-01 SunOS 5.10: md_mirror patch
125075-01 SunOS 5.10: svc-volfs patch
125073-01 SunOS 5.10: vold patch
119555-04 SunOS 5.10: Software to support QLogic Ultra3 SCSI host bus adapters
119090-22 SunOS 5.10: Sun iSCSI Device Driver and Utilities
120272-06 SunOS 5.10: SMA patch
124463-02 SunOS sparc : cacao 2.0 patch 02
119213-11 NSS_NSPR_JSS 3.11.4: NSPR 4.6.4 / NSS 3.11.4 / JSS 4.2.4
118666-11 J2SE 5.0: update 11 patch (5.0u11)
118667-11 J2SE 5.0: update 11 patch (5.0u11), 64bit
122119-05 SunOS 5.10: Patch for Arabic Fonts
119703-08 SunOS 5.10: Patch for localeadm issues
123003-02 SunOS 5.10: dependency issue with SUNWopenssl-include
123630-01 SunOS 5.10: HTTP proxy settings patch
123005-05 SunOS 5.10: Basic Registration Update
123011-01 SunOS 5.10: BR desktop icon patch
119648-03 SunOS 5.10: vlan driver patch
118777-08 SunOS 5.10: Sun GigaSwift Ethernet 1.0 driver patch
121118-11 SunOS 5.10: Sun Update Connection System Client 1.0.9
118712-13 SunOS 5.10: Sun XVR-100 Graphics Accelerator Patch
120410-17 SunOS 5.10: Internet/Intranet Input Method Framework patch
121734-05 SunOS 5.10: patch to support addition of new UTF-8 locales
119810-03 SunOS 5.10: International Components for Unicode Patch
120099-07 APOC 1.2: Sun Java(tm) Desktop System Configuration Shared Libraries
119546-07 APOC 1.2: APOC Configuration Agent Patch
124393-02 CDE 1.6: Dtlogin smf patch
123611-02 X11 6.6.2: Trusted Extensions patch
119280-10 CDE 1.6: Runtime library patch for Solaris 10
119278-12 CDE 1.6: dtlogin patch
124405-01 CDE1.6: sdtfprop patch
124403-01 CDE1.6: dtstyle patch
124401-01 CDE1.6: dtpad patch
124399-01 CDE1.6: dtfile patch
125279-01 CDE1.6: dtsession patch
121977-02 CDE 1.6: dtlogin resources patch
124397-02 CDE1.6: libDtWidget patch
124395-01 CDE1.6: dtaction patch
119117-29 Evolution 1.4.6 patch
123938-01 GNOME 2.6.0: GNU Transport Layer Security Library Patch
119418-03 GNOME 2.6.0: Gnome On-screen Keyboard Patch
119414-13 GNOME 2.6.0: Gnome Accessibility Libraries Patch
119598-08 GNOME 2.6.0: Gnome Screen Reader and Magnifier Patch
120454-02 GNOME 2.6.0: Gnome Apoc GConf Adapter Patch
120460-10 GNOME 2.6.0: Gnome libs Patch
120284-04 GNOME 2.6.0: GNOME CORBA ORB and component framework
122212-17 GNOME 2.6.0: GNOME Desktop Patch
119410-05 GNOME 2.6.0: Gnome Applets Patch
119540-05 GNOME 2.6.0: Gnome Dtlogin configuration Patch
119548-07 GNOME 2.6.0: Gnome Multi-protocol instant messaging client Patch
123162-02 GNOME 2.6.0: Gnome Java Run Time Patch
120739-03 GNOME 2.6.0: GNOME PDF Viewer based on Xpdf
119368-05 GNOME 2.6.0: Printing Technology Patch
121606-02 GNOME 2.6.0: Python patch
120288-03 GNOME 2.6.0: Gnome terminal Patch
119906-08 Gnome 2.6.0: Virtual File System Framework patch
119538-10 GNOME 2.6.0: Window Manager Patch
119115-23 Mozilla 1.7 patch
122958-02 GNOME 2.6.0: RealPlayer media application
119903-02 OpenWindows 3.7.3: Xview Patch
119059-21 X11 6.6.2: Xsun patch
125045-01 X11 6.6.2: Xft patch
124457-01 X11 6.6.2: xdm patch
showrev -p
119788-07
120335-04
121081-05
121118-06
121118-08
121118-10
121453-02
122231-01
java -version:
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Server VM (build 1.5.0_06-b05, mixed mode)
/etc/release:
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
/var/sadm/system/admin/CLUSTER:
CLUSTER=SUNWCall
/usr/lib/cc-ccr/bin/ccr -g cns.assetid:
1917645754
patchsvr setup -l
Patch source URL: https://getupdates1.sun.com/
Cache location: /var/sadm/spool/patchsvr
sysax /tmp: ps -ef | grep cc
root 2006 2003 0 Feb 22 ? 0:17 /usr/lib/cc-cfw/platform/transport/bin/cctransport
root 2022 2017 0 Feb 22 ? 0:01 /usr/lib/cc-cfw/platform/fwagent/bin/ccfwagent
root 2003 1 0 Feb 22 ? 0:00 /bin/sh /usr/lib/cc-cfw/framework/lib/watchdog /usr/lib/cc-cfw/platform/transpo
root 2013 2010 0 Feb 22 ? 0:01 /usr/lib/cc-cfw/platform/ccragent/bin/ccccragent
root 2010 1 0 Feb 22 ? 0:00 /bin/sh /usr/lib/cc-cfw/framework/lib/watchdog /usr/lib/cc-cfw/platform/ccragen
root 2017 1 0 Feb 22 ? 0:00 /bin/sh /usr/lib/cc-cfw/framework/lib/watchdog /usr/lib/cc-cfw/platform/fwagent
noaccess 1898 1 0 Feb 22 ? 1:02 /usr/jdk/instances/jdk1.5.0/bin/java -server -XX:+BackgroundCompilation -Djava.
root 8884 5284 0 13:39:27 console 0:00 grep cc
sysax /tmp: -
Retail Execution Application Device Registration Issues
Hello Community,
I am having issues registering the Retail Execution application with a user in CRM.
I am testing with an iOS device where I downloaded the application from the app store and an Android device where I got the APK from the SAP marketplace.
The guide I am following is the Administrator's Guide SAP Retail Execution 3.2.0.
There are a few issues i've come across which I think might be contributing to my devices not enrolling.
I've completed the setup of the environment till the point in the documentation for Data Change Notification where I need to create an RFC connection to the SMP server.
I entered the IP address for the SUP server with the port as 80. Is port 80 correct?
The username ive setup as supAdmin@Admin with the password.
When I test the connection I get a : Status HTTP Response 404 error.
Another issue I have is that in the documentation under the section enrolling a device using the Relay Server, all the fields are referring to SMP username, SMP Farm ID, SMP Activation code and so on. The connection details I have used in other apps are as follows:
Server : <ip of relay server>
Farm : Relay server Farm ID
Username : jcommerford@crm (CRM login ID @ security configuration - crm is my HTTPAuthentication security configuration I created in SUP)
password :
Port : 80 (relay server port)
URL suffix : leave blank
Domain : The new domain I created in SUP and where the Rex MBO is deployed.
So it isnt making sense as to what details need to go into here.
Lastly...
What is the absolute minimum setup of the CRM system and SUP to register a user through the relay server?
I would like to comment that I havnt performed the initial download of Master Data using DCN but didnt think this was needed to enrol a device. Other than that the guide was followed and configuration done according to it.
Let me know if anymore information is needed as I am very stressed to get this issue sorted out.
Thank you
JaredHello Jared
Has the registration worked without the Relay server setup? I would suggest you try that first.
I am assuming you already set the SM59 destinations for CRM to SMP and trusted RFC to corresponding ECC (but this is not necessarily the issue, because the registration is failing).
Please confirm that the RFC Destination is set as follows (use the supAdmin user on the Logon & Security page)
Check the security provider on SMP (your's may be different but I am using the following for POC and it works)
Could you please confirm if the REX package was deployed correctly on the SMP server by selecting the connection pools for both CRM and ECC for corresponding MBO's
Please post a log of the SMP server once you switch to direct registration to SMP (without relay server)
Thanks
Raza. -
Zenworks 7 Linux Management Device Registration Issue
All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.comOn Tue, 08 Nov 2005 02:37:16 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
Zenworks Linux Management Device Registration Issue
All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.comOn Tue, 08 Nov 2005 02:40:58 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
I have Lightroom 5 on my iMac and have just purchased the update to LR6.
The email that confirms my purchase informs me that I've purchased Adobe Photoshop Lightroom 6 (Mac/Win,English) and gives me a serial number.
However, when I follow the download link I'm offered three versions of Lightroom, Mac/Win English, Windows Multiple Languages and Mac Multiple Languages.
The Mac/Win English download has my serial number against it the the next column states that the download is "not applicable".
The other two show no serial number and offer a download link. In desperation I tried the Mac Multiple Languages link and this downloaded, but it will not install, stating that I don't have an applicable product on my Mac to upgrade from.
I'm stuck.
How do I download and install the product that Adobe tell me I've purchased?
BrianI finally found the solution to the problem I was having. I don't know if this will help anyone, but I'll put it out there anyway. As I said in my previous comment, in previous upgrades I was having problems with Lightroom not launching if I performed the upgrade from within the CC App Manager and Adobe had provided an alternate link to download the upgraded version separatly. The result was (because I didn't clean up after these upgrades) was that I had multiple versions of Lightroom on my system (Windows 7): Ver 5.4 and 5.7. In the start menu, these displayed as separate lanuch icons including the version in the txt.
Yesterday, when I decided to take the chance and upgraded Lightroom from within the CC App Manager, it performed the upgrade, said it was up to date, but I did not notice that it created another version of Lightroom WITHOUT any of the version numbers in the title. This version was buried down in the "All Programs" folder of the Windows 7 start menu.
TODAY, still a little frustrated, I opened the CC App Manager, It still said up to date. I launched Lightroom (from the old 5.7 icon, or rather a shortcut to one of my existing lcats which was tied to this old version) I went to the "Check for Updates" and it said new software was available and showed the new features available in ver 6. I'm not sure why it didn't show this info yesterday but there it was. I clicked the Download button which took me to the lightroom page on Adobe. There was a download button near the top right. It was there yesterday, but all it did was download a CC App Manager install file. So, I went ahead and did the install again, but it just went directly to opening the App Manager. I signed out of the App Manager, and signed back in....still no apparent change.
THEN, AND HERE'S HOW I FOUND OUT THE UPGRADE HAD ACTUALLY BEEN INSTALLED: I ACCIDENTALLY clicked on the Lightroom Icon itself in the CC App Manager. To my surprise, it launched the window showing a list of my catalogs asking me which one I wanted to open. I didn't even realize I had clicked the icon. I chose one of my older, less valued catalogs to be opened...viola! It said I needed to upgrade the catalog. Wow! I cancelled out because I didn't want to upgrade without understanding what was going on. I tried to launch that catalog as I would usually do and it opened right away in version 5.7.....what the hell?!?! Then I had the thought that maybe I had accidentally clicked that icon, so I manually made a backup copy of that catalog and it's previews folder in Explorer. I clicked directly on the Lightroom icon in the CC App Manager. It opened the "choose catalog" window again. I choose the catalog, upgraded it and it opened the upgraded catalog IN VERSION 6. Wow!!
So, being Windows, not Mac, I had to associate the lrcat file type with the NEW Lightroom.exe file, I've upgraded the remaining catalogs and I'm good to go. So, apparently, my previous frustration comment about Adobe maybe fixing the upgrade issue is no longer a valid comment....they have fixed that problem, for my situation at least.
Like I said I don't know if this helps anyone else, but I thought I'd put it out there.
Bill
Maybe you are looking for
-
Tried to get the email sent to reset password, but never ever recieve it no matter how many times i try. I then also try to do it the other why with the security questions but then says ive entered my D.O.B incorrectly. HELP!
-
I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing,
-
Hi there, I'm consistently running into problems connecting to my printer via the router on my WiFi set up. The problem is general to all devices that try to get to the printer on the network. All are connected to the same wireless network. Currently
-
Getting number of rows in a resultset
I am moving my application from JDBC 1.0 to JDBC 2.0. In JDBC 1.0, I used to fire separate query for count(*) to get the no. of rows in results but with JDBC 2.0 is there way that I dont need to execute a separte query to get no. or rows in a results
-
Problems binding array in C# to stored procedure.
I'm having trouble trying to pass an array of ID's to a stored procedure that is expecting an array (listed the procedure definition below). My current interface doesn't return an error, but it also doesn't insert the proper id's. STORED PROCEDURE DE